Skip to Content

55 Results Found

  • Article
  • Open Access
21 Citations
4,534 Views
9 Pages

16 October 2019

Zr-Cu filler metal is proposed for SiC ceramic under special working conditions, as a novel type of the active filler metal, the difference of physical and chemical properties between SiC ceramic and Zr-Cu filler metal leads to greater residual stres...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
21 Citations
4,532 Views
27 Pages

11 March 2023

The formation of dissimilar weld joints, including Al/Ti joints, is an area of research supported by the need for weight reduction and corrosion resistance in automotive, aircraft, aeronautic, and other industries. Depending on the cooling rates and...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
19 Citations
4,626 Views
14 Pages

Multisensor Inspection of Laser-Brazed Joints in the Automotive Industry

  • Miguel A. Machado,
  • Luís S. Rosado,
  • Nuno M. Mendes,
  • Rosa M. Miranda and
  • Telmo G. Santos

4 November 2021

Automobile laser brazing remains a complex process whose results are affected by several process variables that may result in nonacceptable welds. A multisensory customized inspection system is proposed, with two distinct non-destructive techniques:...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
4 Citations
4,313 Views
15 Pages

Key Parameters and Optimal Design of a Split Induction Coil for T-Shaped Pipe Brazing

  • Zhenlin Zhang,
  • Ziheng Yang,
  • Pu Xie,
  • Yue Zhao and ,
  • Jiguo Shan,
  • Yan Liu,
  • Aiping Wu,
  • Sida Ma,
  • Lei Zhang and
  • Hui Chen
  • + 5 authors+ 0 author

The heat exchanger made up of several T-shaped joints is a critical component in energy equipment. A split induction coil was designed for T-shaped aluminum pipe brazing, and the Taguchi method was combined with multi-physical simulation to solve the...

(This article belongs to the Special Issue Properties and Applications of Surfaces/Components Engineered Using Thermal Spray, Welding, and Directed High Energy Beam Technologies)
  • Article
  • Open Access
1 Citations
2,528 Views
13 Pages

21 November 2023

Determination of the physico-chemical interactions between liquid and solid substances is a key technological factor in many industrial processes in metallurgy, electronics or the aviation industry, where technological processes are based on solderin...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
6 Citations
3,774 Views
18 Pages

Crack Propagation of SS304/BNi-2 Brazed Joints: Experiments and Numerical Simulations

  • Fan Zhou,
  • Wenchun Jiang,
  • Juni Tan,
  • Jingzhen Shi and
  • Daikun Yang

23 September 2019

The strength of brazed joints is of great significance for plate-fin heat exchangers. Although a lot of research on the strength of brazed joints has been carried out, few studies have focused on the whole process of the crack propagation of brazed j...

  • Article
  • Open Access
6 Citations
4,088 Views
12 Pages

Experimental and Simulation Studies on the Compressive Properties of Brazed Aluminum Honeycomb Plates and a Strength Prediction Method

  • Lanxin Jiang,
  • Shoune Xiao,
  • Jingke Zhang,
  • Ruijuan Lv and ,
  • Bing Yang,
  • Dawei Dong,
  • Guangwu Yang and
  • Tao Zhu
  • + 3 authors+ 0 author

20 November 2020

To study the compressive mechanical properties of a new type of brazed aluminum honeycomb plate (BAHP), tensile tests on single- and brazed-cell walls as well as compression tests in the out-of-plane, in-plane longitudinal, and transverse directions...

  • Feature Paper
  • Article
  • Open Access
10 Citations
6,307 Views
14 Pages

13 June 2017

The control of metal wettability is a key-factor in the field of brazing or welding-brazing. The present paper deals with the numerical simulation of the whole phenomena occurring during the assembly of dissimilar alloys. The study is realized in the...

(This article belongs to the Special Issue Laser Welding)
  • Article
  • Open Access
16 Citations
4,904 Views
17 Pages

Microstructure and Mechanical Properties of 4343/3003/6111/3003 Four-Layer Al Clad Sheets Subjected to Different Conditions

  • Minglong Kang,
  • Li Zhou,
  • Yunlai Deng,
  • Yajun Luo and ,
  • Maoqing He,
  • Na Zhang,
  • Zhonghua Huang and
  • Lijun Dong
  • + 3 authors+ 0 author

30 April 2022

To meet the lightweight demands of automobiles, Al composite sheets require excellent mechanical properties under the condition of minimal thickness after high-temperature brazing processing. Generally, the standard used Al brazing sheets have a low...

  • Article
  • Open Access
3 Citations
4,266 Views
24 Pages

23 October 2021

The ultrasonic-assisted brazing process was studied both numerically and experimentally. The ultrasonic brazing system was modeled by considering the actual brazing conditions. The numerical model showed the distribution of acoustic pressure within t...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
14 Citations
4,510 Views
11 Pages

Numerical Analysis of the Effects of Pulsed Laser Spot Heating Parameters on Brazing of Diamond Tools

  • Yangguang Wang,
  • Guoqin Huang,
  • Yanfang Su,
  • Meiqin Zhang and ,
  • Zhen Tong and
  • Changcai Cui
  • + 1 author+ 0 author

27 May 2019

A 3D finite element (FE) model is built to numerically analyze heating parameters on temperature during brazing diamond grains by the pulsed laser spot heating. A pulsed Nd:YAG laser is used for experimental validation. The results show that during l...

  • Article
  • Open Access
1,030 Views
28 Pages

Stress Characteristics Analysis of Aluminum Brazed Structures (ABS) in Liquid Oxygen Subcoolers Under Liquid Nitrogen Conditions

  • Baoding Wang,
  • Qing Zhang,
  • Qingfen Ma,
  • Zhongye Wu and ,
  • Yilong Sun,
  • Jingru Li and
  • Hui Lu
  • + 2 authors+ 0 author

4 February 2026

The liquid oxygen subcooler is a key unit for the deep cooling, storage, and transportation of liquid oxygen. Its frequent start–stop operation under liquid nitrogen bath conditions introduces potential risks to service reliability. This study...

  • Article
  • Open Access
1 Citations
1,670 Views
20 Pages

27 September 2024

Gas-wave refrigerators are widely used devices that utilize gas pressure to produce wave motion inside an oscillating tube for high-power refrigeration. This paper manufactures the core component of gas-wave refrigerators—the oscillating tubes&...

  • Article
  • Open Access
7 Citations
4,292 Views
25 Pages

30 July 2023

The enhancement mechanism of the fillet on brazing joints is of great significance for vacuum brazing technology. Although a lot of research on the enhancement mechanism of the fillet has been carried out, some key components of a comprehensive syste...

(This article belongs to the Section Welding and Joining)
  • Feature Paper
  • Article
  • Open Access
10 Citations
7,329 Views
14 Pages

Brazing of Al-alloys is of interest in many application fields (e.g., mechanical and automotive). The surface preparation of substrates and the in depth investigation of the interface reaction between aluminum substrates and brazing materials is fund...

(This article belongs to the Special Issue Surface Engineering of Light Alloys)
  • Article
  • Open Access
20 Citations
3,325 Views
13 Pages

18 August 2022

Stainless steel core panel is a novel structure for fast modular building, but its brazing foils are susceptible to defects due to the difficulty of precisely controlling the brazing process. An automated, nondestructive testing technique is highly d...

(This article belongs to the Special Issue Electromagnetic Nondestructive Testing)
  • Article
  • Open Access
11 Citations
4,270 Views
14 Pages

15 July 2020

The electromagnetic process happening between an induction brazing coil and the brazing assembly was studied and is described in the following pages. Using the tools of numerical analysis, we managed to achieve 3-D simulation of the process, which in...

  • Article
  • Open Access
3 Citations
2,588 Views
16 Pages

Wetting Behaviors of Al-Si-Cu-Mg-Zn Brazing Materials on 5083 Aluminum Alloy

  • Wei Guo,
  • Yuechao Zhuo,
  • Yonglin Zhao,
  • Han Li and
  • Bingyuan Han

17 October 2024

The wetting behaviors of Al-Si-Cu-Mg-Zn brazing materials on 5083 aluminum alloy substrate were investigated through changing the proportion of Mg from 0 to 2 wt.%. The experimental results showed that the welding process goes through the three follo...

  • Article
  • Open Access
286 Views
18 Pages

23 September 2026

Rail grinding is an essential maintenance process for removing surface defects and restoring the designed rail profile, but conventional resin-bonded grinding wheels often suffer from rapid wear under heavy-load and high-impact conditions. In this st...

  • Article
  • Open Access
12 Citations
6,106 Views
23 Pages

Microstructure, Residual Stresses, and Strain-Rate-Dependent Deformation and Fracture Behavior of AISI 304L Joints Brazed with NiCrSiB Filler Metals

  • Johannes L. Otto,
  • Milena Penyaz,
  • Kerstin Möhring,
  • Lars Gerdes and ,
  • Thorge Schaum,
  • Alexander Ivannikov,
  • Anke Schmiedt-Kalenborn,
  • Boris Kalin and
  • Frank Walther
  • + 4 authors+ 0 author

5 April 2021

The knowledge of alloy–process–structure–property relationships is of particular interest for several safety-critical brazed components and requires a detailed characterization. Thus, three different nickel-based brazing filler metals were produced w...

(This article belongs to the Special Issue Mechanical Characteristics of Brazed Joints in Metallic Materials)
  • Article
  • Open Access
7 Citations
3,634 Views
13 Pages

Fatigue Behaviour of Brazed Joints for Heat Exchangers

  • Blaž Hanželič,
  • Jernej Kralj,
  • Tonica Bončina,
  • Branko Nečemer and ,
  • Janez Kramberger,
  • Roman Satošek and
  • Srečko Glodež
  • + 2 authors+ 0 author

19 January 2024

The plate heat exchanger (PHE) is a component that provides heat to be transferred from hot water to domestic cold water without mixing them with high efficiency. Over the lifetime of the PHE, cyclic pressures act on the brazing points and the plates...

(This article belongs to the Special Issue Advanced Welding Technologies and Additive Manufacturing of Alloy and Metals)
  • Article
  • Open Access
7 Citations
1,695 Views
16 Pages

14 November 2024

Stainless steel core plates (SSCPs) show great potential for modular construction due to their superiority of excellent mechanical properties, light weight, and low cost over traditional concrete and honeycomb structures. During the brazing process o...

(This article belongs to the Special Issue Fusion Bonding/Welding of Metal and Non-Metallic Materials)
  • Article
  • Open Access
2 Citations
3,178 Views
16 Pages

Radio Frequency Properties of a 3D Printed Klystron Circuit

  • Charlotte Wehner,
  • Bradley Shirley,
  • Garrett Mathesen,
  • Julian Merrick and ,
  • Brandon Weatherford and
  • Emilio Alessandro Nanni
  • + 1 author+ 0 author

The manufacturing of active RF devices like klystrons is dominated by expensive and time-consuming cycles of machining and brazing. In this article, we characterize the RF properties of X-band klystron cavities and an integrated circuit manufactured...

  • Article
  • Open Access
1,074 Views
15 Pages

Effect of Brazing on Microstructure and Properties of Die-Cast Al–RE Alloys

  • Chenxu Zhao,
  • Changxing Mei,
  • Kai Wang,
  • Xiaoqiu Yuan and ,
  • Wenbin Liu and
  • Zehua Chen
  • + 1 author+ 0 author

Compared with traditional Al–Si die-cast alloys, which have good formability and low cost but poor brazeability and inadequate corrosion resistance, high-pressure die-cast (HPDC) Al–RE alloys exhibit superior comprehensive properties. To...

  • Article
  • Open Access
5 Citations
4,403 Views
11 Pages

14 February 2024

The present study investigates the accumulative roll bonding process applied to the EN AW 3003 aluminum alloy, serving as a composite material on both sides and consisting of the EN AW 4343 aluminum alloy. For the characterization of the optical micr...

(This article belongs to the Special Issue Numerical and Experimental Advances in Metal Processing)
  • Article
  • Open Access
7 Citations
3,776 Views
18 Pages

Effects of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of the Brazed Joint of a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy

  • Zhipeng Zhang,
  • Jide Liu,
  • Chongwei Zhu,
  • Yuyu Huang and ,
  • Xinguang Wang,
  • Yizhou Zhou,
  • Jianjun Wang and
  • Jinguo Li
  • + 3 authors+ 0 author

11 April 2023

A novel fourth-generation nickel-based single crystal superalloy was brazed with Co-based filler alloy. The effects of post-weld heat treatment (PWHT) on the microstructure and mechanical properties of brazed joints were investigated. The experimenta...

(This article belongs to the Special Issue Fatigue and Fracture Behaviour of Welded and Other Additive Manufactured Structures (Volume II))
  • Article
  • Open Access
1,005 Views
14 Pages

Microstructure and Properties of a Four-Layer Aluminum Alloy Composite Sheet for Brazed Structural Applications

  • Ying Liu,
  • Zhengfu Zhang,
  • Yu Cao,
  • Zhuoqiang Mo and ,
  • Yuejing Bin and
  • Xiaoping Yang
  • + 1 author+ 0 author

19 March 2026

Aluminum alloy composites are widely used in various high-end fields due to their ability to give full play to the advantages of each layer. However, the traditional three-layer aluminum alloy composite sheet cannot meet the current demand. In this s...

  • Article
  • Open Access
1,808 Views
18 Pages

Mechanical Properties Simulation of Aluminum Alloy Sheet Using SSP and CPFEM

  • Wei Wang,
  • Ting Li,
  • Guobin Wang,
  • François Luneau and
  • Manuel Henner

15 March 2025

This paper focuses on the mechanical performance of an aluminum alloy with uneven microstructure formed after stamping and brazing. The mechanical behavior of the stamping area is studied through the crystal plasticity finite element method (CPFEM)....

  • Article
  • Open Access
3 Citations
3,622 Views
12 Pages

28 August 2019

A typical dissolution wetting system, Bi-Sn eutectic filler metal over a Bi substrate in a high-purity argon atmosphere was investigated first using real-time in situ hot stage microscopy for the extensive use of the sharp-interface model and the dif...

(This article belongs to the Special Issue Multiscale Modeling of Materials and Processes)
  • Article
  • Open Access
9 Citations
5,723 Views
17 Pages

Foils of aluminum 1050 H14 ½ hard temper and 99.9% copper with 500-micron thickness have been used to manufacture similar and dissimilar composites by composite metal foil manufacturing (CMFM). The metal foils are bonded to each other using a...

  • Article
  • Open Access
2 Citations
3,339 Views
11 Pages

Over-Size Pill-Box Window for Sub-Terahertz Vacuum Electronic Devices

  • Tongbin Yang,
  • Xiaotong Guan,
  • Wenjie Fu,
  • Dun Lu and ,
  • Chaoyang Zhang,
  • Jie Xie,
  • Xuesong Yuan and
  • Yang Yan
  • + 3 authors+ 0 author

The pill-box window is one of the important components of microwave vacuum electronic devices (VEDs), and research into it is of great significance. As the operating frequency increases, the problems associated with the reduction in the structure siz...

(This article belongs to the Special Issue Design, Technologies and Applications of High Power Vacuum Electronic Devices from Microwave to THz Band)
  • Article
  • Open Access
937 Views
19 Pages

Effect of Over-Temperature on Creep Damage of Bi-Based Brazing Filler Alloy

  • Jun Hong,
  • Tao Wang,
  • Baoyin Zhu,
  • Dongpeng Li and ,
  • Haitao Dong,
  • Dungui Zuo and
  • Gongye Zhang
  • + 2 authors+ 0 author

20 November 2025

This work investigates the creep damage behavior and life prediction of Bi-based brazing alloys and their corresponding joints under intermittent over-temperature conditions, and proposes an integrated real-time monitoring and analytical framework. T...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,926 Views
13 Pages

Development of 1.3 GHz Medium-β (β = 0.634) Disk-Loaded Deflecting Cavity for 150 keV Electron Beam

  • Zhongxiang Xu,
  • Fang Wang,
  • Tao Tan,
  • Yunqi Liu and ,
  • Senlin Huang and
  • Shengwen Quan
  • + 1 author+ 0 author

15 September 2022

A miniaturized 150 kV DC photocathode gun is developed at Peking University to generate electron beam which can be manipulated in temporal and spatial distribution as requirements freely. To measure the bunch length which is an important temporal par...

(This article belongs to the Section Applied Physics General)
  • Article
  • Open Access
3 Citations
2,171 Views
20 Pages

Numerical Modeling of Residual Stresses and Fracture Strengths of Ba0.5Sr0.5Co0.8Fe0.2O3−δ in Reactive Air Brazed Joints

  • Donat Rudenskiy,
  • Simone Herzog,
  • Lutz Horbach,
  • Nils Christian Gebhardt and ,
  • Felix Weber,
  • Anke Kaletsch and
  • Christoph Broeckmann
  • + 2 authors+ 0 author

21 November 2023

Reactive Air Brazing (RAB) enables the joining of vacuum-sensitive oxide ceramics, such as Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF), to metals in a one-step process. However, damage may form in ceramic or joint during RAB. In this work, experiment...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
22 Citations
6,026 Views
20 Pages

Experimental and Numerical Study on Hydraulic Performance of Chevron Brazed Plate Heat Exchanger at Low Reynolds Number

  • Yi Zhong,
  • Kai Deng,
  • Shenglang Zhao,
  • Jinlin Hu and ,
  • Yingjie Zhong,
  • Qingyong Li,
  • Zenan Wu,
  • Zhiming Lu and
  • Qing Wen
  • + 4 authors+ 0 author

1 September 2020

Few experiments have been performed to investigate the hydraulic performance in a chevron brazed plate heat exchanger (BPHE) with the narrow channel at lower Reynolds number. The hydraulic characteristics of seven types of chevron BPHEs were investig...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
4 Citations
1,931 Views
20 Pages

Numerical Analysis of Pressure Drops in Single-Phase Flow Through Channels of Brazed Plate Heat Exchangers with Dimpled Corrugated Plates

  • Lorenzo Giunti,
  • Francesco Giacomelli,
  • Urban Močnik,
  • Giacomo Villi and ,
  • Adriano Milazzo and
  • Lorenzo Talluri
  • + 1 author+ 0 author

29 July 2025

The presented research examines the performance characteristics of Brazed Plate Heat Exchangers through computational fluid dynamics (CFD), focusing on pressure drop calculations for single-phase flow within full channels of plates featuring dimpled...

(This article belongs to the Special Issue The Advances and Applications of Computational Fluid Dynamics and Heat Transfer)
  • Article
  • Open Access
3 Citations
1,157 Views
17 Pages

Fabrication Process and Surface Morphology Prediction of Radial Straight Groove-Structured CBN Grinding Wheel by Laser Cladding

  • Zhelun Ma,
  • Wei Zhang,
  • Qi Liu,
  • Liaoyuan Chen and ,
  • Chao Zhang,
  • Changsheng Liu,
  • Tianbiao Yu and
  • Qinghua Wang
  • + 3 authors+ 0 author

15 October 2025

Structured CBN (cubic boron nitride) grinding wheels usually have a specially designed texture on their surface to reduce the grinding heat and grinding force. However, most structured grinding wheels are fabricated by electroplating, brazing, sinter...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,432 Views
22 Pages

11 October 2025

A critical aspect in the design of power electronics packages is the prediction of their mechanical response under severe thermomechanical loads and the consequent structural damage. For this purpose, finite element (FE) simulations are used to estim...

(This article belongs to the Special Issue Reliability of Power Electronics Devices and Converter Systems: 2nd Edition)
  • Article
  • Open Access
926 Views
14 Pages

Machine Learning-Assisted Fabrication for K417G Alloy Prepared by Wide-Gap Brazing: Process Parameters, Microstructure, and Properties

  • Zhun Cheng,
  • Min Wu,
  • Bo Wei,
  • Xinhua Wang and ,
  • Xiaoqiang Li and
  • Jiafeng Fan
  • + 1 author+ 0 author

23 January 2026

This study employed data-driven machine learning models to analyze the effects of filler material composition and other process parameters on mechanical properties during the crack repair of nickel-based superalloys such as K417G using wide-gap brazi...

(This article belongs to the Special Issue Advanced Metal Welding and Joining Technologies—3rd Edition)
  • Article
  • Open Access
32 Citations
8,270 Views
10 Pages

Roll bonding (RB) of bimetal laminates is a solid phase method of bonding and has been widely used in the manufacturing of layered strips. This process is widely used for brazing sheet for automotive, aerospace, vessel, and electrical industries. In...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
380 Views
39 Pages

19 August 2026

To enhance critical infrastructure protection against low-cost UAV impacts, this study proposes a novel ring lattice sandwich structure (RLSS) fabricated via an economical interlocking-assembly-brazing method. Its quasi-static compressive behavior is...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
23 Citations
4,574 Views
23 Pages

Bending Response of 3D-Printed Titanium Alloy Sandwich Panels with Corrugated Channel Cores

  • Zhenyu Zhao,
  • Jianwei Ren,
  • Shaofeng Du,
  • Xin Wang and ,
  • Zihan Wei,
  • Qiancheng Zhang,
  • Yilai Zhou,
  • Zhikun Yang and
  • Tian Jian Lu
  • + 4 authors+ 0 author

24 January 2021

Ultralight sandwich constructions with corrugated channel cores (i.e., periodic fluid-through wavy passages) are envisioned to possess multifunctional attributes: simultaneous load-carrying and heat dissipation via active cooling. Titanium alloy (Ti-...

(This article belongs to the Special Issue Behavior of Metallic and Composite Structures (Second Volume))
  • Review
  • Open Access
1,480 Views
37 Pages

17 July 2026

Aluminum/magnesium (Al/Mg) hybrid structures are promising candidates for lightweight engineering, but reliable joining is still limited by brittle intermetallic compounds (IMCs), oxide films, pores, cracks, and corrosion-related degradation. This re...

  • Article
  • Open Access
2 Citations
2,744 Views
25 Pages

Analysis of the Mechanical Performance and Durability of Adhesively Bonded Joints Used in the Milling Tool Industry

  • Rafael J. F. de Sousa,
  • Pedro N. Gomes,
  • Daniel S. Correia,
  • Ricardo J. C. Carbas and ,
  • Eduardo A. S. Marques,
  • Paulo J. C. das Neves,
  • Willian P. Afonso and
  • Lucas F. M. da Silva
  • + 3 authors+ 0 author

14 April 2023

Epoxy adhesives, widely used in multiple structural applications, are used in the milling tool industry to replace brazing and mechanical fastening when joining the cutting bits to the tool body; though their durability is still a concern. This work...

(This article belongs to the Special Issue Advanced Diagnosis/Monitoring of Jointed Structures)
  • Article
  • Open Access
24 Citations
6,531 Views
22 Pages

Investigation on Laser Welding of Al Ribbon to Cu Sheet: Weldability, Microstructure, and Mechanical and Electrical Properties

  • Won-Sang Shin,
  • Dae-Won Cho,
  • Donghyuck Jung,
  • Heeshin Kang and ,
  • Jeng O Kim,
  • Yoon-Jun Kim and
  • Changkyoo Park
  • + 2 authors+ 0 author

19 May 2021

The pulsed laser welding of Al ribbon to Cu sheet was investigated for the electrical interconnections in power electronic modules. The various experimental conditions with the different laser powers, scan speeds, and heat inputs were employed for ob...

(This article belongs to the Special Issue Numerical Simulation of Metals Welding Process)
  • Article
  • Open Access
14 Citations
5,047 Views
20 Pages

Reliability of liquid rocket engines is strictly connected with the successful operation of cooling jackets, able to sustain the impressive operative conditions in terms of huge thermal and mechanical loads, generated in thrust chambers. Cryogenic fu...

  • Article
  • Open Access
48 Citations
9,168 Views
13 Pages

28 November 2018

The thermal cycling life of direct bonded aluminum (DBA) and active metal brazing (AMB) substrates with two types of plating—Ni electroplating and Ni–P electroless plating—was evaluated by thermal shock tests between −50 and 2...

(This article belongs to the Special Issue Material Interconnections and Microstructure Control-Related)
  • Article
  • Open Access
6 Citations
2,710 Views
18 Pages

A Control-Oriented ANFIS Model of Evaporator in a 1-kWe Organic Rankine Cycle Prototype

  • Hamid Enayatollahi,
  • Paul Sapin,
  • Chinedu K. Unamba,
  • Peter Fussey and ,
  • Christos N. Markides and
  • Bao Kha Nguyen
  • + 1 author+ 0 author

This paper presents a control-oriented neuro-fuzzy model of brazed-plate evaporators for use in organic Rankine cycle (ORC) engines for waste heat recovery from exhaust-gas streams of diesel engines, amongst other applications. Careful modelling of t...

(This article belongs to the Special Issue Theory and Applications of Fuzzy Systems and Neural Networks)
  • Article
  • Open Access
2,725 Views
13 Pages

19 July 2023

In this study, the solidified microstructure and phase transition temperatures of Ag50.5Cu33.3Sn16.2-xInx (x = 5.0, 6.6, 8.2, 9.1, 9.9, 10.7, 11.5, 12.3; at.%) alloys were investigated using a scanning electron microscope with energy dispersive spect...

(This article belongs to the Topic Phase Diagram, Phase Transition and Advanced Materials Design)
  • Article
  • Open Access
8 Citations
2,685 Views
12 Pages

Microstructure and Mechanical Properties of TA2/Q235 Laser Weld Joint with Copper Interlayer

  • Liang Zhang,
  • Qi Wang,
  • Xiaolei Guo,
  • Pan Chen and ,
  • Yinling Wang,
  • Chen Wang,
  • Zhanxue Wang and
  • Zongling Wang
  • + 3 authors+ 0 author

19 May 2023

For the dissimilar metal welding needs of TA2 titanium and Q235 steel, preliminary trials were conducted using laser welding methods, and the results showed that the addition of a copper interlayer and the bias of the laser beam toward the Q235 side...

(This article belongs to the Section Metals and Alloys)

of 2