Skip to Content

998 Results Found

  • Abstract
  • Open Access
1 Citations
1,871 Views
3 Pages

A Chipless RFID Humidity Sensor for Smart Packaging Applications

  • Viviana Mulloni,
  • Giada Marchi,
  • Andrea Gaiardo,
  • Matteo Valt and ,
  • Massimo Donelli and
  • Leandro Lorenzelli
  • + 1 author+ 0 author

A chipless RFID humidity sensor suitable for smart packaging is proposed in this work. The sensor is flexible, fast, low-cost, easy to fabricate and can be read wirelessly. The results show a very high sensitivity in the low-humidity range (1–1...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Article
  • Open Access
25 Citations
5,977 Views
19 Pages

Relative Contributions of Packaging Elements to the Thermal Hysteresis of a MEMS Pressure Sensor

  • Youssef Hamid,
  • David A. Hutt,
  • David C. Whalley and
  • Russell Craddock

19 March 2020

Piezoresistive silicon pressure sensor samples were thermally cycled after being consecutively packaged to three different levels. These started with the absolute minimum to allow measurement of the output and with each subsequent level incorporating...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
26 Citations
6,376 Views
13 Pages

Chromatic Sensor to Determine Oxygen Presence for Applications in Intelligent Packaging

  • Gracia López-Carballo,
  • Virginia Muriel-Galet,
  • Pilar Hernández-Muñoz and
  • Rafael Gavara

28 October 2019

A chromatic sensor has been designed for the detection of oxygen in package headspace. The sensor is based on the redox change of methylene blue (MB) to its leuco form. Its formulation includes the pigment, glycerol, as a sacrificial electron donor,...

(This article belongs to the Special Issue Optical Sensors, Biosensors and Sensing Methodologies: Novel Materials, Approaches, Configurations and Applications)
  • Article
  • Open Access
2 Citations
2,202 Views
13 Pages

Flexible Micro-Sensor Packaging and Durability for Real-Time Monitoring of Vanadium Flow Batteries

  • Chi-Yuan Lee,
  • Chin-Lung Hsieh,
  • Chia-Hung Chen,
  • Lung-Jieh Yang and ,
  • Ching-Liang Dai,
  • Chong-An Jiang and
  • Yu-Chun Chen
  • + 2 authors+ 0 author

13 October 2022

The reactions of vanadium redox flow batteries (VRFBs) are quite complex and the internal environment is strongly acidic. The internal voltage, current, temperature and flow distribution play a very important role in the performance of a VRFB. The VR...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
15 Citations
3,074 Views
19 Pages

Optimization of Embedded Sensor Packaging Used in Rollpave Pavement Based on Test and Simulation

  • Zhoujing Ye,
  • Yanxia Cai,
  • Chang Liu,
  • Kaiji Lu and ,
  • Dylan G. Ildefonzo and
  • Linbing Wang
  • + 1 author+ 0 author

19 March 2022

Rollpave pavement, as a rollable prefabricated asphalt pavement technology, can effectively reduce the overall road closure time required for pavement construction and maintenance. Sensors can be integrated into Rollpave pavement, thereby avoiding se...

(This article belongs to the Special Issue Experimental Testing and Constitutive Modelling of Pavement Materials)
  • Article
  • Open Access
55 Citations
7,716 Views
19 Pages

11 March 2022

The use of petroleum-based plastics in food packaging leads to various environmental impacts, while spoilage of food and misinterpretation of food-date labelling account for food insecurity; therefore, a biopolymer capable of indicating food edibilit...

(This article belongs to the Special Issue Polymers from Renewable Resources for Packaging and Biomedical Applications)
  • Article
  • Open Access
15 Citations
3,115 Views
27 Pages

25 May 2025

This study introduces a novel framework for the inverse design of sustainable food packaging materials using generative adversarial networks (GANs) and the recently released OMat24 dataset containing 110 million DFT-calculated inorganic material stru...

(This article belongs to the Special Issue New Sensors Based on Inorganic Material)
  • Article
  • Open Access
54 Citations
12,470 Views
15 Pages

11 January 2022

Combining intelligent and active packaging serves the dual purpose of detecting color changes in food that reflect changes in its quality and prolonging its shelf life. This study developed an intelligent and active packaging system made from the cel...

(This article belongs to the Section Biosensors)
  • Article
  • Open Access
450 Views
22 Pages

Upcycling Waste Toothpaste Packaging into a Flexible Triboelectric Sensor for Motion Recognition and Human–Machine Interaction

  • Shuping Xue,
  • Yuanyuan Wang,
  • Danyang He,
  • Shuwei Zhang and ,
  • Lei Jia and
  • Yun Yang
  • + 1 author+ 0 author

The multilayer composite structure of waste toothpaste packaging hinders its effective recovery through conventional sorting and recycling processes. In this study, a flexible single-electrode triboelectric sensor based on waste toothpaste tubes (WTT...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
1 Citations
1,799 Views
11 Pages

Langasite (LGS) Surface Acoustic Wave (SAW) Pressure Sensor with Kovar Alloy Point-Force Packaging for High-Temperature Environments

  • Yabing Ke,
  • Ruoyu Zhang,
  • Chen Fu,
  • Jingting Luo and ,
  • Zhengxi He and
  • Zhiguang Deng
  • + 1 author+ 0 author

14 January 2026

Langasite (LGS)-based surface acoustic wave (SAW) sensors are promising for high-temperature pressure detection. However, their performance is limited by the low pressure sensitivity of conventional sealed-cavity packaging and temperature-induced mea...

(This article belongs to the Special Issue Exploring the Sensing Potential of Acoustic Wave Devices)
  • Article
  • Open Access
15 Citations
3,853 Views
11 Pages

14 July 2023

The use of intelligent sensor-based packaging in food products allows the quick evaluation of food quality. This study aimed to design a color sensor from surimi utilizing sappan wood extract (SWE) for intelligent food packaging. The myofibrillar-pro...

(This article belongs to the Section Food Science and Technology)
  • Article
  • Open Access
26 Citations
4,888 Views
12 Pages

Applications of Chipless RFID Humidity Sensors to Smart Packaging Solutions

  • Viviana Mulloni,
  • Giada Marchi,
  • Andrea Gaiardo,
  • Matteo Valt and ,
  • Massimo Donelli and
  • Leandro Lorenzelli
  • + 1 author+ 0 author

30 April 2024

Packaging solutions have recently evolved to become smart and intelligent thanks to technologies such as RFID tracking and communication systems, but the integration of sensing functionality in these systems is still under active development. In this...

(This article belongs to the Special Issue Eurosensors 2023 Selected Papers)
  • Review
  • Open Access
70 Citations
25,919 Views
33 Pages

Wafer-Level Vacuum Packaging of Smart Sensors

  • Allan Hilton and
  • Dorota S. Temple

31 October 2016

The reach and impact of the Internet of Things will depend on the availability of low-cost, smart sensors—“low cost” for ubiquitous presence, and “smart” for connectivity and autonomy. By using wafer-level processes not only for the smart sensor fabr...

(This article belongs to the Section Physical Sensors)
  • Review
  • Open Access
76 Citations
15,080 Views
22 Pages

25 September 2024

Real-time monitoring of changes in packaged food is crucial to ensure safety and alleviate environmental issues. Accordingly, the development of indicators and sensors for smart packaging has long been anticipated, especially for gases related to foo...

(This article belongs to the Section Food Packaging and Preservation)
  • Review
  • Open Access
102 Citations
12,685 Views
24 Pages

17 December 2022

The current development of science and the contemporary market, combined with high demands from consumers, force manufacturers and scientists to implement new solutions in various industries, including the packaging industry. The emergence of new sol...

(This article belongs to the Special Issue Review Papers in Sensors and Sensing Technologies)
  • Proceeding Paper
  • Open Access
2 Citations
2,139 Views
4 Pages

Technology for SMD Packaging MOX Gas Sensors

  • Nikolay Samotaev,
  • Konstantin Oblov,
  • Anastasia Ivanova,
  • Boris Podlepetsky and ,
  • Nikolay Volkov and
  • Nazar Zibilyuk
  • + 1 author+ 0 author

30 November 2018

The perspective combination of laser micromilling technology and jet (aerosol) printing technologies for ceramic MEMS producing of microhotplate in the surface mounted device (SMD) package for the metal oxide (MOX) sensor is describing. There are dis...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Review
  • Open Access
241 Citations
26,578 Views
23 Pages

Bio-Based Sensors for Smart Food Packaging—Current Applications and Future Trends

  • Carolina Rodrigues,
  • Victor Gomes Lauriano Souza,
  • Isabel Coelhoso and
  • Ana Luísa Fernando

18 March 2021

Intelligent food packaging is emerging as a novel technology, capable of monitoring the quality and safety of food during its shelf-life time. This technology makes use of indicators and sensors that are applied in the packaging and that detect chang...

(This article belongs to the Special Issue Sensors for Food Safety and Quality 2019-2020)
  • Article
  • Open Access
25 Citations
24,578 Views
19 Pages

5 August 2009

A novel plastic packaging of a piezoresistive pressure sensor using a patterned ultra-thick photoresist is experimentally and theoretically investigated. Two pressure sensor packages of the sacrifice-replacement and dam-ring type were used in this st...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering - 2009)
  • Article
  • Open Access
44 Citations
6,769 Views
13 Pages

Characteristics of an Implantable Blood Pressure Sensor Packaged by Ultrafast Laser Microwelding

  • Sungil Kim,
  • Jaesoon Park,
  • Sangkyun So,
  • Sanghoon Ahn and ,
  • Jiyeon Choi,
  • Chiwan Koo and
  • Yeun-Ho Joung
  • + 2 authors+ 0 author

15 April 2019

We propose a new packaging process for an implantable blood pressure sensor using ultrafast laser micro-welding. The sensor is a membrane type, passive device that uses the change in the capacitance caused by the membrane deformation due to applied p...

(This article belongs to the Special Issue Wearable and Implantable Sensors and Electronics Circuits)
  • Review
  • Open Access
94 Citations
44,528 Views
21 Pages

Application of Through Glass Via (TGV) Technology for Sensors Manufacturing and Packaging

  • Chen Yu,
  • Shaocheng Wu,
  • Yi Zhong,
  • Rongbin Xu and ,
  • Tian Yu,
  • Jin Zhao and
  • Daquan Yu
  • + 2 authors+ 0 author

28 December 2023

Glass has emerged as a highly versatile substrate for various sensor and MEMS packaging applications, including electromechanical, thermal, optical, biomedical, and RF devices, due to its exceptional properties such as high geometrical tolerances, ou...

(This article belongs to the Special Issue Advanced Sensors in MEMS)
  • Article
  • Open Access
13 Citations
3,309 Views
14 Pages

Reliability Analysis of CFRP-Packaged FBG Sensors Using FMEA and FTA Techniques

  • Zheng Liu,
  • Yongjie Li,
  • Nan Zhang,
  • Zhongwei Liang and
  • Fangyi Li

17 November 2021

Carbon fiber-reinforced plastics (CFRP)-packaged fiber Bragg grating (FBG) sensors are widely used in full-scale structural testing of wind turbine blades (WTBs). However, the specific process to make CFRP-packaged FBG sensors, such as packaging, bon...

(This article belongs to the Special Issue Reliability Theory and Applications in Complicated and Smart Systems)
  • Article
  • Open Access
12 Citations
4,239 Views
12 Pages

In-Situ Wireless Pressure Measurement Using Zero-Power Packaged Microwave Sensors

  • Julien Philippe,
  • Maria Valeria De Paolis,
  • Dominique Henry,
  • Alexandre Rumeau and ,
  • Antony Coustou,
  • Patrick Pons and
  • Hervé Aubert
  • + 2 authors+ 0 author

13 March 2019

This paper reports the indoor wireless measurement of pressure from zero-power (or passive) microwave (24 GHz) sensors. The sensors are packaged and allow the remote measurement of overpressure up to 2.1 bars. Their design, fabrication process and pa...

(This article belongs to the Special Issue Passive Electromagnetic Sensors for Autonomous Wireless Networks)
  • Proceeding Paper
  • Open Access
3,291 Views
4 Pages

A rapid advanced packaging concept, consisting of inkjet photopolymer printing and Ag nanoparticles printing, was investigated for the construction of a pressure sensor package. Acrylate-type 3D package housing with 7 through-holes was printed with a...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
7 Citations
3,506 Views
10 Pages

17 April 2020

Wide bandgap gallium nitride (GaN)-based devices have attracted a lot of attention in optoelectronics, power electronics, and sensing applications. AlGaN/GaN based sensors, featuring high-density and high-mobility two-dimensional electron gas (2DEG),...

(This article belongs to the Special Issue Silicon Carbide and Other Wide Bandgap Materials: Fundamentals, Device Applications and Future Prospects)
  • Article
  • Open Access
21 Citations
6,101 Views
11 Pages

Stability and Safety Assessment of Phosphorescent Oxygen Sensors for Use in Food Packaging Applications

  • Caroline A. Kelly,
  • Malco Cruz-Romero,
  • Joseph P. Kerry and
  • Dmitri B. Papkovsky

Five types of new solid-state oxygen sensors, four based on microporous polypropylene fabric materials and one on polyphenylene sulphide films impregnated with phosphorescent platinum(II)-benzoporphyrin dye, were tested for their stability and safety...

(This article belongs to the Collection Optical Chemosensors and Biosensors)
  • Article
  • Open Access
11 Citations
4,510 Views
13 Pages

A Novel Packaging of the MEMS Gas Sensors Used for Harsh Outdoor and Human Exhale Sampling Applications

  • Lungtai Chen,
  • Chinsheng Chang,
  • Liangju Chien,
  • Borshiun Lee and
  • Wenlo Shieh

26 May 2023

Dust or condensed water present in harsh outdoor or high-humidity human breath samples are one of the key sources that cause false detection in Micro Electro-Mechanical System (MEMS) gas sensors. This paper proposes a novel packaging mechanism for ME...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
5 Citations
3,449 Views
20 Pages

Characterization of Engineering-Suitable Optical Fiber Sensors Packaged with Glass Fiber-Reinforced Polymers

  • Tong Jiao,
  • Chuhong Pu,
  • Wenjing Xing,
  • Tao Lv and ,
  • Yuan Li,
  • Huaping Wang and
  • Jianping He
  • + 2 authors+ 0 author

10 May 2022

Glass fiber-reinforced polymer- (GFRP-) packaged optical fiber (OF) sensors are considered a promising engineering-suitable sensor for structural health monitoring. To date, some critical characteristics of the GFRP-packaged OF (GFRP-OF) sensors have...

(This article belongs to the Special Issue Symmetry in Applied Mechanics Analysis on Smart Optical Fiber Sensors)
  • Proceeding Paper
  • Open Access
4 Citations
2,590 Views
7 Pages

Wafer-Level Packaged CMOS-SOI-MEMS Thermal Sensor at Wide Pressure Range for IoT Applications

  • Moshe Avraham,
  • Gady Golan,
  • Michele Vaiana,
  • Giuseppe Bruno and ,
  • Maria Eloisa Castagna,
  • Sara Stolyarova,
  • Tanya Blank and
  • Yael Nemirovsky
  • + 3 authors+ 0 author

14 November 2020

Wafer-level processed and wafer-level packaged low-cost microelectromechanical system (MEMS) thermal sensors are required for a wide range of Internet of Things (IoT) and wearables applications. Recently, a new generation of uncooled thermal sensors...

(This article belongs to the Proceedings of 7th International Electronic Conference on Sensors and Applications)
  • Review
  • Open Access
7 Citations
4,609 Views
19 Pages

27 April 2025

The development of multifunctional smart food packaging has garnered considerable attention in research. Gelatin exhibits outstanding characteristics, featuring remarkable gel strength, molecular binding affinity, excellent colloidal dispersibility,...

(This article belongs to the Section Gel Applications)
  • Feature Paper
  • Article
  • Open Access
1,453 Views
14 Pages

A High-Accuracy Solid/Liquid Composite Packaging Method for Implantable Pressure Sensors

  • Bo Wang,
  • Yubiao Zhang,
  • Yuning Huang,
  • Zhonghua Li and ,
  • Senran Jiang,
  • Fuji Wang,
  • Qiang Liu and
  • Xing Yang
  • + 3 authors+ 0 author

27 January 2026

This study addresses the critical packaging requirements of implantable pressure sensors concerning measurement accuracy and environmental stability. We propose a solid/liquid composite packaging technique based on Parylene-C and silicone oil. Utiliz...

(This article belongs to the Special Issue Flexible and Wearable Sensors, 4th Edition)
  • Systematic Review
  • Open Access
24 Citations
3,100 Views
50 Pages

18 April 2025

All carbon-based sensors play a critical role in ensuring the sustainability of smart packaging while enabling real-time monitoring of parameters such as humidity, temperature, pressure, and strain during transit. This systematic review covers the li...

(This article belongs to the Special Issue Advances in Biomass-Based Materials and Their Applications (2nd Edition))
  • Review
  • Open Access
298 Citations
29,742 Views
20 Pages

16 October 2018

The growing interest in food quality and safety requires the development of sensitive and reliable methods of analysis as well as technology for freshness preservation and food quality. This review describes the status of chemical and biological sens...

(This article belongs to the Section Food Analytical Methods)
  • Article
  • Open Access
28 Views
21 Pages

Development and Thermal Characterization of a Mechanically Packaged Hetero-Core Optical Fiber Temperature Sensor

  • Eun-Jae Wi,
  • Thien-Dinh Nguyen,
  • Yong-Woon Choi,
  • Jung-Suk Park and ,
  • Hyoung-Jin Kim,
  • Chang-Woo Kim and
  • Young-Bok Kim
  • + 2 authors+ 0 author

20 November 2026

This study presents the development and thermal characterization of a mechanically packaged Hetero-core optical fiber temperature sensor utilizing the thermal expansion of a silicone pad. To improve the insufficient optical-output recovery observed d...

(This article belongs to the Special Issue 2D Material-Based Fabrication and Devices, 2nd Edition)
  • Article
  • Open Access
3 Citations
1,835 Views
13 Pages

14 September 2023

We designed a 3D geometrical model of a metal-oxide gas sensor and its custom packaging and used it in finite element modeling (FEM) analysis for obtaining temperature and heat flux distribution. The 3D computer simulation, performed with GetDP softw...

(This article belongs to the Section Electronic Materials)
  • Article
  • Open Access
20 Citations
6,224 Views
11 Pages

20 June 2016

The establishment and control of oxygen levels in packs of oxygen-sensitive food products such as cheese is imperative in order to maintain product quality over a determined shelf life. Oxygen sensors quantify oxygen concentrations within packaging u...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
12 Citations
4,013 Views
12 Pages

Impact of COVID-19 Lockdown on Air Pollutants in a Coastal Area of the Yangtze River Delta, China, Measured by a Low-Cost Sensor Package

  • Lang Chen,
  • Jingjing Li,
  • Xiaobing Pang,
  • Kangli Shi and ,
  • Jianmeng Chen,
  • Junliang Wang and
  • Meng Xu
  • + 2 authors+ 0 author

6 March 2021

Ningbo is a major coastal city in the Yangtze River Delta region, China, with the largest cargo capacity in the world. We conducted a field campaign in Ningbo to measure the impact of the COVID-19 lockdown on air pollutants including NO2, O3 and CO f...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
27 Citations
7,065 Views
18 Pages

23 February 2017

Local strain measurements are considered as an effective method for structural health monitoring of high-temperature components, which require accurate, reliable and durable sensors. To develop strain sensors that can be used in higher temperature en...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
103 Views
25 Pages

15 November 2026

Removing topographic effects from optical satellite imagery is essential for monitoring vegetation in mountainous regions, because uneven solar illumination causes substantial reflectance variation within the same land-cover class. Existing topograph...

(This article belongs to the Section Forest Remote Sensing)
  • Article
  • Open Access
13 Citations
12,252 Views
11 Pages

Liquid-Phase Packaging of a Glucose Oxidase Solution with Parylene Direct Encapsulation and an Ultraviolet Curing Adhesive Cover for Glucose Sensors

  • Seiichi Takamatsu,
  • Hisanori Takano,
  • Nguyen Binh-Khiem,
  • Tomoyuki Takahata and ,
  • Eiji Iwase,
  • Kiyoshi Matsumoto and
  • Isao Shimoyama
  • + 2 authors+ 0 author

9 June 2010

We have developed a package for disposable glucose sensor chips using Parylene encapsulation of a glucose oxidase solution in the liquid phase and a cover structure made of an ultraviolet (UV) curable adhesive. Parylene was directly deposited onto a...

(This article belongs to the Special Issue Glucose Sensors)
  • Article
  • Open Access
10 Citations
6,014 Views
9 Pages

Wafer-Level Self-Packaging Design and Fabrication of MEMS Capacitive Pressure Sensors

  • Yuanjie Wan,
  • Zhiwei Li,
  • Zile Huang,
  • Baofa Hu and ,
  • Wenlong Lv,
  • Chunquan Zhang,
  • Haisheng San and
  • Shaoda Zhang
  • + 3 authors+ 0 author

This paper reports a MEMS capacitive pressure sensor (CPS) based on the operating principle of touch mode. The CPS was designed and fabricated using wafer-level self-packaged MEMS processes. The variable capacitance sensing structure was vacuum-seale...

  • Article
  • Open Access
733 Views
18 Pages

4 July 2026

The oil-immersed environment within power transformers is characterized by high temperatures, strong electric fields, and severe electromagnetic interference, posing significant challenges for simultaneous multi-parameter monitoring. Conventional ele...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
21 Citations
9,711 Views
14 Pages

18 November 2013

O2 sensors were used to non-destructively monitor O2 levels in commercially packed pre-cooked, convenience modified atmosphere packaging (MAP) foods. A substantial level of O2 (>15%) was present in packs resulting in a shorter than expected shelf-...

  • Article
  • Open Access
3 Citations
2,253 Views
22 Pages

Gelatin Hydrogel pH Sensors Incorporating Anthocyanins for Intelligent Food Packaging: Towards Enhanced Food Spoilage Detection

  • Pompilia Mioara Lopes,
  • Liviu Mare,
  • Lucian Barbu-Tudoran,
  • Alina Gadja and
  • Violeta Popescu

31 March 2026

Protein-based hydrogels composed of gelatin, whey and glycerol were functionalized with red cabbage extract (RCE) to develop natural colorimetric pH sensors for intelligent food packaging. Structural analysis by X-ray diffraction (XRD) and scanning e...

(This article belongs to the Special Issue Nature Polymer Gels for Food Packaging)
  • Article
  • Open Access
40 Citations
8,775 Views
13 Pages

A Sandwich-Structured Piezoresistive Sensor with Electrospun Nanofiber Mats as Supporting, Sensing, and Packaging Layers

  • Zicong Zhao,
  • Bintian Li,
  • Liqun Xu,
  • Yan Qiao and ,
  • Feng Wang,
  • Qingyou Xia and
  • Zhisong Lu
  • + 2 authors+ 0 author

23 May 2018

Electrospun nanofiber mats have been used as sensing elements to construct piezoresistive devices due to their large surface area and high porosity. However, they have not been utilized as skin-contact supporting layers to package conductive nanofibe...

(This article belongs to the Special Issue Soft Materials and Systems)
  • Article
  • Open Access
15 Citations
7,610 Views
13 Pages

High-Q Wafer Level Package Based on Modified Tri-Layer Anodic Bonding and High Performance Getter and Its Evaluation for Micro Resonant Pressure Sensor

  • Liying Wang,
  • Xiaohui Du,
  • Lingyun Wang,
  • Zhanhao Xu and ,
  • Chenying Zhang and
  • Dandan Gu
  • + 1 author+ 0 author

16 March 2017

In order to achieve and maintain a high quality factor (high-Q) for the micro resonant pressure sensor, this paper presents a new wafer level package by adopting cross-layer anodic bonding technique of the glass/silicon/silica (GSS) stackable structu...

(This article belongs to the Special Issue MEMS and Nano-Sensors)
  • Article
  • Open Access
2,915 Views
15 Pages

Biocompatible Heterogeneous Packaging and Laser-Assisted Fluid Interface Control for In Situ Sensor in Organ-on-a-Chip

  • Yu-Hsuan Lin,
  • Shing-Fung Lau,
  • Yen-Pei Lu,
  • Kuo-Cheng Huang and ,
  • Chien-Fang Ding,
  • Yu-Hsiang Tang and
  • Hsin-Yi Tsai
  • + 2 authors+ 0 author

30 December 2024

The development of bionic organ-on-a-chip technology relies heavily on advancements in in situ sensors and biochip packaging. By integrating precise biological and fluid condition sensing with microfluidics and electronic components, long-term dynami...

(This article belongs to the Special Issue Micro-/Nanofluidic and Lab-on-a-Chip Devices for Biomedical Applications, 3rd Edition)
  • Article
  • Open Access
8 Citations
2,971 Views
12 Pages

28 July 2022

A chip-level hermetic package for a high-temperature graphene pressure sensor was investigated. The silicon cap, chip and substrate were stacked by Cu–Sn and Au–Au bonding to enable wide-range measurements while guaranteeing a high hermet...

(This article belongs to the Special Issue Advanced Interconnect and Packaging)
  • Feature Paper
  • Review
  • Open Access
222 Citations
40,057 Views
30 Pages

Fruit Quality Monitoring with Smart Packaging

  • Arif U. Alam,
  • Pranali Rathi,
  • Heba Beshai,
  • Gursimran K. Sarabha and
  • M. Jamal Deen

22 February 2021

Smart packaging of fresh produce is an emerging technology toward reduction of waste and preservation of consumer health and safety. Smart packaging systems also help to prolong the shelf life of perishable foods during transport and mass storage, wh...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
12 Citations
4,571 Views
10 Pages

2 May 2018

The commercially-available optical oxygen-sensing system Optech-O2 Platinum was applied to nondestructively assess the in situ performance of bulk, vacuum-packaged raw beef in three ~300 kg containers. Twenty sensors were attached to the inner surfac...

(This article belongs to the Section Chemical Sensors)
  • Feature Paper
  • Review
  • Open Access
83 Citations
15,929 Views
41 Pages

Freshness Monitoring of Packaged Vegetables

  • Heba Beshai,
  • Gursimran K. Sarabha,
  • Pranali Rathi,
  • Arif U. Alam and
  • M. Jamal Deen

9 November 2020

Smart packaging is an emerging technology that has a great potential in solving conventional food packaging problems and in meeting the evolving packaged vegetables market needs. The advantages of using such a system lies in extending the shelf life...

(This article belongs to the Section Food Science and Technology)

of 20