Skip to Content

418 Results Found

  • Proceeding Paper
  • Open Access
24 Citations
4,834 Views
6 Pages

Inkjet-Printed Flexible Temperature Sensor Based on Silver Nanoparticles Ink

  • Qiao Jun Liew,
  • Aiman Sajidah Abd Aziz,
  • Hing Wah Lee,
  • Mai Woon Lee and ,
  • Huzein Fahmi Hawari and
  • Mohd Haris Md Khir
  • + 1 author+ 0 author

14 November 2020

In this research, a flexible inkjet-printed temperature sensor with in-house silver nanoparticles ink is presented and compared with the sensor printed with commercial silver nanoparticles ink. These sensors have an average width of 0.5 ± 0.04...

(This article belongs to the Proceedings of 7th International Electronic Conference on Sensors and Applications)
  • Proceeding Paper
  • Open Access
125 Views
8 Pages

28 October 2026

Flexible temperature sensors that are lightweight, conformational and low in power are of interest for several applications. Printed temperature sensors of the resistive type, which are made from low-cost materials and are integrated into sensing and...

(This article belongs to the Proceedings of The 13th International Electronic Conference on Sensors and Applications)
  • Proceeding Paper
  • Open Access
12 Citations
4,084 Views
4 Pages

A Disposable Inkjet-Printed Humidity and Temperature Sensor Fabricated on Paper

  • Dimitris Barmpakos,
  • Apostolos Segkos,
  • Christos Tsamis and
  • Grigoris Kaltsas

10 December 2018

In this work we present the development of a low-cost humidity and temperature sensing platform on paper by inkjet printing, using a commercial AgNPs conductive ink. The humidity sensing module was capable of measuring relative humidity in the range...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Communication
  • Open Access
1 Citations
3,345 Views
9 Pages

Reverse Offset Printed, Biocompatible Temperature Sensor Based on Dark Muscovado

  • Shahid Aziz,
  • Junaid Ali,
  • Krishna Singh Bhandari,
  • Wenning Chen and ,
  • Sijia Li and
  • Dong Won Jung
  • + 1 author+ 0 author

11 November 2022

A reverse-offset printed temperature sensor based on interdigitated electrodes (IDTs) has been investigated in this study. Silver nanoparticles (AgNPs) were printed on a glass slide in an IDT pattern by reverse-offset printer. The sensing layer consi...

(This article belongs to the Special Issue The Convergence of Artificial Intelligence, Sensor and System for Sustainable E-healthcare Services and Biomedical Applications)
  • Article
  • Open Access
27 Citations
5,378 Views
14 Pages

7 February 2023

The human body’s temperature is one of the most important vital markers due to its ability to detect various diseases early. Accurate measurement of this parameter has received considerable interest in the healthcare sector. We present a novel...

(This article belongs to the Section Wearables)
  • Article
  • Open Access
19 Citations
6,163 Views
17 Pages

Water-Based Indium Tin Oxide Nanoparticle Ink for Printed Toluene Vapours Sensor Operating at Room Temperature

  • Jan Maslik,
  • Ivo Kuritka,
  • Pavel Urbanek,
  • Petr Krcmar and ,
  • Pavol Suly,
  • Milan Masar and
  • Michal Machovsky
  • + 2 authors+ 0 author

27 September 2018

This study is focused on the development of water-based ITO nanoparticle dispersions and ink-jet fabrication methodology of an indium tin oxide (ITO) sensor for room temperature operations. Dimensionless correlations of material-tool-process variable...

(This article belongs to the Special Issue Advanced Nanomaterials based Gas Sensors)
  • Review
  • Open Access
103 Citations
13,006 Views
24 Pages

22 January 2021

Printing technologies have been attracting increasing interest in the manufacture of electronic devices and sensors. They offer a unique set of advantages such as additive material deposition and low to no material waste, digitally-controlled design...

(This article belongs to the Special Issue 2D/3D Printed Sensors and Electronics)
  • Proceeding Paper
  • Open Access
6 Citations
3,540 Views
5 Pages

Aerosol/Ink Jet Printing Technology for High-Temperature MEMS Sensors

  • Alexey A. Vasiliev,
  • Anton V. Nisan and
  • Nikolay N. Samotaev

In this work we present the results on the application of additive technology that is aerosol and ink jet technique for the fabrication of high-temperature metal oxide gas sensors. The application of thin (12 μm) alumina membrane, aerosol jet printin...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
10 Citations
3,937 Views
10 Pages

Evaluation of Temperature Sensors for Detection of Heat Sources Using Additive Printing Method

  • Ju-Hun Ahn,
  • Han-Na Kim,
  • Jin Yeon Cho,
  • Jeong Ho Kim and
  • Chang-Yull Lee

29 October 2022

Electrohydrodynamic (EHD) inkjet printing is an efficient technique for printing multiple sensors in a multifaceted area. It can be applied to various fields according to the shape of the printing result and the algorithm employed. In this study, tem...

(This article belongs to the Special Issue Temperature Sensors 2021-2023)
  • Article
  • Open Access
6 Citations
4,390 Views
14 Pages

Integrated Temperature–Humidity Sensors for a Pouch-Type Battery Using 100% Printing Process

  • Gyeongseok Oh,
  • Jae-Ho Sim,
  • Mijin Won,
  • Minhun Jung and ,
  • Snigdha Paramita Mantry and
  • Dong-Soo Kim
  • + 1 author+ 0 author

25 December 2023

The performance, stability, and lifespan of lithium-ion batteries are influenced by variations in the flow of lithium ions with temperature. In electric vehicles, coolants are generally used to maintain the optimal temperature of the battery, leading...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
6 Citations
1,684 Views
20 Pages

Three-Dimensionally Printed Temperature Sensors Based on Conductive PLA Materials

  • Agnese Staffa,
  • Gašper Krivic,
  • Mariachiara Tocci,
  • Massimiliano Palmieri and ,
  • Filippo Cianetti and
  • Janko Slavič
  • + 1 author+ 0 author

14 October 2025

Recent innovations in thermoplastic extrusion 3D printing have promoted the development of functional materials, such as conductive composites, which lead the way to the creation of sensors embedded directly into printed structures. To this aim, this...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
37 Citations
5,457 Views
17 Pages

8 August 2021

The present work reports on the detailed electro-thermal evaluation of a highly water dispersible, functionalized reduced graphene oxide (f-rGO) using inkjet printing technology. Aiming in the development of printed electronic devices, a flexible pol...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
27 Citations
4,220 Views
14 Pages

In a unique approach to develop a “green” solution for in-situ monitoring, low-cost inkjet-printed temperature sensors on paper substrate were fully integrated into natural fiber-reinforced lightweight components for which structural health monitorin...

(This article belongs to the Special Issue Paper-Based Sensors and Microfluidic Devices)
  • Article
  • Open Access
27 Citations
4,656 Views
10 Pages

High-Performance Temperature Sensor by Employing Screen Printing Technology

  • Zhaojun Liu,
  • Bian Tian,
  • Bingfei Zhang,
  • Zhongkai Zhang and ,
  • Jiangjiang Liu,
  • Libo Zhao,
  • Peng Shi,
  • Qijing Lin and
  • Zhuangde Jiang
  • + 4 authors+ 0 author

2 August 2021

In the present study, a high-performance n-type temperature sensor was developed by a new and facile synthesis approach, which could apply to ambient temperature applications. As impacted by the low sintering temperature of flexible polyimide substra...

(This article belongs to the Special Issue MEMS/NEMS Sensors and Actuators)
  • Article
  • Open Access
10 Citations
3,181 Views
13 Pages

Electrohydrodynamic Printed Ultra-Micro AgNPs Thin Film Temperature Sensors Array for High-Resolution Sensing

  • Yingping He,
  • Lanlan Li,
  • Zhixuan Su,
  • Lida Xu and ,
  • Maocheng Guo,
  • Bowen Duan,
  • Wenxuan Wang,
  • Bo Cheng,
  • Daoheng Sun and
  • Zhenyin Hai
  • + 5 authors+ 0 author

17 August 2023

Current methods for thin film sensors preparation include screen printing, inkjet printing, and MEMS (microelectromechanical systems) techniques. However, their limitations in achieving sub-10 μm line widths hinder high-density sensors array fabri...

(This article belongs to the Special Issue Flexible and Wearable Sensors, 2nd Edition)
  • Article
  • Open Access
3 Citations
1,249 Views
14 Pages

Fabrication of Highly Sensitive Conformal Temperature Sensors on Stainless Steel via Aerosol Jet Printing

  • Ziqi Wang,
  • Jun Xu,
  • Yingjie Niu,
  • Yuanyuan Tan and ,
  • Biqi Yang and
  • Chenglin Yi
  • + 1 author+ 0 author

Promoting the development of aerospace vehicles toward structural–functional integration and intelligent sensing is a key strategy for achieving lightweight, high-reliability, and autonomous operation and maintenance of next-generation aircraft...

(This article belongs to the Special Issue 3D Micro/Nano Printing Technologies and Advanced Materials)
  • Article
  • Open Access
12 Citations
5,549 Views
13 Pages

A Thermal Flow Sensor Based on Printed Circuit Technology in Constant Temperature Mode for Various Fluids

  • Thomas Glatzl,
  • Roman Beigelbeck,
  • Samir Cerimovic,
  • Harald Steiner and ,
  • Florian Wenig,
  • Thilo Sauter,
  • Albert Treytl and
  • Franz Keplinger
  • + 3 authors+ 0 author

2 March 2019

We present a thermal flow sensor designed for measuring air as well as water flow velocities in heating, ventilation, and air conditioning (HVAC) systems. The sensor is designed to integrate the flow along the entire diameter of the pipe also quantif...

(This article belongs to the Special Issue Eurosensors 2018 Selected Papers)
  • Article
  • Open Access
34 Citations
6,219 Views
20 Pages

Fully Inkjet-Printed CuO Sensor on Flexible Polymer Substrate for Alcohol Vapours and Humidity Sensing at Room Temperature

  • Petr Krcmar,
  • Ivo Kuritka,
  • Jan Maslik,
  • Pavel Urbanek and ,
  • Pavel Bazant,
  • Michal Machovsky,
  • Pavol Suly and
  • Petr Merka
  • + 3 authors+ 0 author

11 July 2019

This work focuses on an inkjet-fabricated sensor based on copper oxide nanostructured particles on polymer flexible substrate for the sensing of alcohol vapours and humidity at room temperature. Nanoparticles were prepared by a microwave-assisted sol...

(This article belongs to the Collection Gas Sensors)
  • Article
  • Open Access
13 Citations
3,343 Views
14 Pages

11 December 2022

Hydrogen is expected to play an important role in the near future in the transition to a net-zero economy. Therefore, the development of new in situ and real-time analytical tools able to quantify hydrogen at high temperatures is required for future...

(This article belongs to the Section Chemical Sensors)
  • Case Report
  • Open Access
2 Citations
2,432 Views
18 Pages

This case study aims to combine the advantage of the additive manufacturing of sensors with a mixed reality (MR) app, developed in a lab-scale workshop, to safely monitor and control the temperature of parts. Namely, the measurements were carried out...

(This article belongs to the Section Actuators, Sensors and Devices)
  • Article
  • Open Access
10 Citations
5,619 Views
11 Pages

NFC-Enabled Dual-Channel Flexible Printed Sensor Tag

  • Jonghyun Choi,
  • Ian Visagie,
  • Yi Chen,
  • Robert Abbel and
  • Kate Parker

28 July 2023

Wireless sensor tags in flexible formats have numerous applications; some are commercially available for specific target applications. However, most of these wireless sensor tags have been used for single-sensing applications. In this study, we desig...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
7 Citations
2,097 Views
13 Pages

This study investigated the influence of microstructure on the performance of Ag inkjet-printed, resistive temperature detectors (RTDs) fabricated using particle-free inks based on a silver nitrate (AgNO3) precursor and ethylene glycol as the ink sol...

(This article belongs to the Special Issue Microstructured Sensors: From Design to Application)
  • Proceeding Paper
  • Open Access
6 Citations
2,308 Views
6 Pages

Evaluating Temperature Influence on Low-Cost Microphone Response for 3D Printing Process Monitoring

  • Luanne Barbosa,
  • Thiago Glissoi Lopes,
  • Paulo Roberto Aguiar,
  • Reinaldo Götz de Oliveira Junior and
  • Thiago Valle França

1 November 2021

The 3D printing process deals with the manufacture of parts by adding layers of material onto a heated printing bed. Electret microphones are widely used as low-cost and precise measuring devices. However, its response was negatively affected by high...

(This article belongs to the Proceedings of The 8th International Electronic Conference on Sensors and Applications)
  • Article
  • Open Access
2 Citations
1,724 Views
16 Pages

28 March 2026

Hematocrit (HCT) fluctuations and ambient temperature variations are two critical interference factors limiting the accuracy of electrochemical glucose test strips in self-monitoring of blood glucose (SMBG). In this study, a high-precision screen-pri...

(This article belongs to the Special Issue Artificial Intelligence (AI)-Driven Biosensing)
  • Article
  • Open Access
9 Citations
3,865 Views
12 Pages

Wide-Range Humidity–Temperature Hybrid Flexible Sensor Based on Strontium Titanate and Poly 3,4 Ethylenedioxythiophene Polystyrene Sulfonate for Wearable 3D-Printed Mask Applications

  • Adnan Ahmed,
  • Afaque Manzoor Soomro,
  • Darshan Kumar,
  • Muhammad Waqas and ,
  • Kashif Hussain Memon,
  • Faheem Ahmed,
  • Suresh Kumar,
  • Hina Ashraf and
  • Kyung Hyun Choi
  • + 4 authors+ 0 author

30 December 2022

In this paper, we report a fast, linear wide-range hybrid flexible sensor based on a novel composite of strontium titanate (SrTiO3) and poly 3,4 ethylenedioxythiophene polystyrene sulfonate (PEDOT: PSS) as a sensing layer. Inter-digitate electrodes (...

(This article belongs to the Section Environmental Sensing)
  • Article
  • Open Access
8 Citations
3,362 Views
12 Pages

15 March 2022

Wind sensing has become a key component in various fields with the growing trend of assessing air conditions for energy conversion. In this study, we demonstrated a wireless screen-printable flexible strain sensor system based on Ag/MWCNT composite f...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
15 Citations
3,003 Views
12 Pages

Wireless LC Conformal Temperature Sensor Based on Ag Film (9912-K FL) for Bearing Temperature Measurement

  • Chen Li,
  • Qiyun Feng,
  • Yingping Hong,
  • Lixia Gao and ,
  • Ximing Guo,
  • Wenzhi Xue and
  • Jijun Xiong
  • + 2 authors+ 0 author

23 August 2022

As the key component of aero-engines and industrial gas turbines, a bearing’s working temperature at high speed is close to 300 ℃. The measurement of an engine bearing’s temperature is of great significance to ensure flight saf...

  • Article
  • Open Access
13 Citations
3,463 Views
15 Pages

Temperature Measurement at Curved Surfaces Using 3D Printed Planar Resistance Temperature Detectors

  • Adam Steckiewicz,
  • Kornelia Konopka,
  • Agnieszka Choroszucho and
  • Jacek Maciej Stankiewicz

In this article, novel 3D printed sensors for temperature measurement are presented. A planar structure of the resistive element is made, utilizing paths of a conductive filament embedded in an elastic base. Both electrically conductive and flexible...

(This article belongs to the Section Electronic Materials, Devices and Applications)
  • Article
  • Open Access
16 Citations
3,786 Views
11 Pages

27 September 2021

Temperature measurement is very important for thermal control, which is required for the advancement of mechanical and electronic devices. However, current temperature sensors are limited by their inability to measure curved surfaces. To overcome thi...

(This article belongs to the Section Electronic Materials)
  • Proceeding Paper
  • Open Access
7 Citations
2,566 Views
5 Pages

Temperature Dependence of Gauge Factor of Printed Piezoresistive Layers Embedded in Organic Coatings

  • Pavel Kulha,
  • Herbert Enser,
  • Johannes K. Sell,
  • Bernhard Strauß and ,
  • Michaela Schatzl-Linder,
  • Bernhard Jakoby and
  • Wolfgang Hilber
  • + 2 authors+ 0 author

The paper reports on temperature behavior of strain sensitivity of recently introduced screen printing technology facilitating the realization of silver and carbon black piezoresistors embedded in organic coatings. Piezoresistive layers were prepared...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
1 Citations
2,393 Views
22 Pages

Packaging-Grade Paper Humidity Sensors Made by Flexography Only: From Sustainable Manufacturing to Transient Applications

  • Tatiana Nowicka,
  • Sandra Lepak-Kuc,
  • Jerzy Szałapak,
  • Daniel Janczak and ,
  • Jarosław Szusta and
  • Małgorzata Jakubowska
  • + 1 author+ 0 author

13 February 2026

Printed electronics offer a scalable and sustainable route for integrating sensing systems into everyday environments; however, the use of flexography remains highly limited, and fully printed sensors fabricated exclusively with industrial flexograph...

(This article belongs to the Special Issue Advances in Surface and Coatings Technologies)
  • Article
  • Open Access
19 Citations
4,030 Views
13 Pages

Fabrication of Low-Cost Resistance Temperature Detectors and Micro-Heaters by Electrohydrodynamic Printing

  • Salman Ahmad,
  • Khalid Rahman,
  • Taqi Ahmad Cheema,
  • Muhammad Shakeel and ,
  • Arshad Khan and
  • Amine Bermak
  • + 1 author+ 0 author

28 August 2022

EHD printing is an advanced deposition technology that is commonly utilized for the direct manufacture of electrical devices. In this study, meander-type resistive electrodes consisting of silver nanoparticles were printed directly on rigid glass and...

(This article belongs to the Section D3: 3D Printing and Additive Manufacturing)
  • Article
  • Open Access
6 Citations
5,397 Views
24 Pages

Flexible Hybrid Electrodes for Continuous Measurement of the Local Temperature in Long-Term Wounds

  • Ana María Rodes-Carbonell,
  • Juan Torregrosa-Valls,
  • Antonio Guill Ibáñez,
  • Alvaro Tormos Ferrando and ,
  • María Aránzazu Juan Blanco and
  • Antonio Cebrián Ferriols
  • + 1 author+ 0 author

13 April 2021

Long-term wounds need a continuous assessment of different biophysical parameters for their treatment, and there is a lack of affordable biocompatible devices capable of obtaining that uninterrupted flow of data. A portable prototype that allows care...

(This article belongs to the Special Issue Textile Sensors Based on Printed Electronics Technology)
  • Article
  • Open Access
4 Citations
2,432 Views
21 Pages

22 September 2025

Thermal imbalance can cause significant stress in large-scale structures such as bridges and buildings, negatively impacting their structural health. To assist in the structural health monitoring systems that analyze these thermal effects, a flexible...

(This article belongs to the Section Sensors Development)
  • Communication
  • Open Access
9 Citations
2,498 Views
14 Pages

25 April 2024

In this paper, we propose a novel method for temperature measurement using surface acoustic wave (SAW) temperature sensors on curved or irregular surfaces. We integrate SAW resonators onto flexible printed circuit boards (FPCBs) to ensure better conf...

(This article belongs to the Special Issue Micro/Nano Sensors: Fabrication and Applications)
  • Proceeding Paper
  • Open Access
444 Views
5 Pages

Veterinary Blood Oxygen Detection

  • Kimberly Mpala and
  • Trudi-Heleen Joubert

28 November 2025

A multimodal sensor was developed to record dissolved oxygen, L*a*b* colour, temperature, and pH. This work builds on an existing model that correlates blood oxygen saturation with L*a*b* colour values. An L*a*b* colour sensor was constructed from an...

(This article belongs to the Proceedings of Micro Manufacturing Convergence Conference)
  • Article
  • Open Access
12 Citations
7,590 Views
12 Pages

Internal Integrated Temperature Sensor for Lithium-Ion Batteries

  • Pengfei Yang,
  • Kai Su,
  • Shijie Weng,
  • Jiang Han and ,
  • Qian Zhang,
  • Zhiqiang Li,
  • Xiaoli Peng and
  • Yong Xiang
  • + 3 authors+ 0 author

17 January 2025

Lithium-ion batteries represent a significant component of the field of energy storage, with a diverse range of applications in consumer electronics, portable devices, and numerous other fields. In view of the growing concerns about the safety of bat...

(This article belongs to the Section Industrial Sensors)
  • Abstract
  • Open Access
1,518 Views
2 Pages

Sensor Protection Caps: Development Aspects and Verification

  • Gunter Hagen,
  • Julia Herrmann,
  • Thomas Kern,
  • Thomas Wöhrl and
  • Ralf Moos

High-temperature gas sensors are often affected by non-constant ambient conditions, especially with respect to mass flow variations. Steady operation conditions are essential for attaining stable results. So, appropriate protection caps must provide...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Article
  • Open Access
89 Citations
6,137 Views
15 Pages

Application of Additive Layer Manufacturing Technique on the Development of High Sensitive Fiber Bragg Grating Temperature Sensors

  • Arnaldo Leal-Junior,
  • Jonathan Casas,
  • Carlos Marques,
  • Maria José Pontes and
  • Anselmo Frizera

24 November 2018

This paper presents the development of temperature sensors based on fiber Bragg gratings (FBGs) embedded in 3D-printed structures made of different materials, namely polylatic acid (PLA) and thermoplastic polyurethane (TPU). A numerical analysis of t...

(This article belongs to the Special Issue Temperature Sensors)
  • Article
  • Open Access
9 Citations
3,085 Views
16 Pages

Temperature-Sensitive Sensors Modified with Poly(N-isopropylacrylamide): Enhancing Performance through Tailored Thermoresponsiveness

  • Lei Yang,
  • Guangwei Qiu,
  • Yuanyuan Sun,
  • Luqiao Sun and ,
  • Xiaoguang Fan,
  • Qiuju Han and
  • Zheng Li
  • + 2 authors+ 0 author

15 July 2024

The development of temperature-sensitive sensors upgraded by poly(N-isopropylacrylamide) (PNIPAM) represents a significant stride in enhancing performance and tailoring thermoresponsiveness. In this study, an array of temperature-responsive electroch...

(This article belongs to the Section Nanochemistry)
  • Proceeding Paper
  • Open Access
104 Views
9 Pages

Inkjet-Printed RTDs on Kapton for Integrated Sensing Platforms: A Preliminary Metrological Evaluation

  • Irene Torreggiani,
  • Parisa Esmaili,
  • Sarah Tonello,
  • Loredana Cristaldi and
  • Emilio Sardini

2 November 2026

The growing use of printed RTDs in compact and integrated sensing systems requires their response to be characterized under controlled measurement conditions. This paper presents the experimental assessment of a developed platform for inkjet-printed...

(This article belongs to the Proceedings of The 13th International Electronic Conference on Sensors and Applications)
  • Article
  • Open Access
544 Views
16 Pages

High-Performance SnO2 Ink for Detecting Low-Temperature H2S Gas with Advanced Dispensing Printing Technology

  • Sufaid Shah,
  • Jesse Nii Okai Amu-Darko,
  • Xingzuo Song,
  • Xiaojin Zhao and
  • Xiaofang Pan

23 September 2026

Hydrogen sulfide (H2S) is a highly toxic and environmentally hazardous gas, necessitating sensitive and reliable detection at trace concentrations. In this study, a dispensing-printed SnO2-based MEMS gas sensor was developed using a sol–gel-der...

(This article belongs to the Special Issue Advanced Design and Development of CMOS Image and Microelectronic Sensors)
  • Article
  • Open Access
8 Citations
2,864 Views
17 Pages

Additive Manufacturing of Miniaturized Peak Temperature Monitors for In-Pile Applications

  • Kiyo T. Fujimoto,
  • Lance A. Hone,
  • Kory D. Manning,
  • Robert D. Seifert and ,
  • Kurt L. Davis,
  • James N. Milloway,
  • Richard S. Skifton,
  • Yaqiao Wu,
  • Malwina Wilding and
  • David Estrada
  • + 5 authors+ 0 author

19 November 2021

Passive monitoring techniques have been used for peak temperature measurements during irradiation tests by exploiting the melting point of well-characterized materials. Recent efforts to expand the capabilities of such peak temperature detection inst...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
23 Citations
5,412 Views
16 Pages

Inkjet-Printed Temperature Sensors Characterized according to Standards

  • Jonas Jäger,
  • Adrian Schwenck,
  • Daniela Walter,
  • André Bülau and ,
  • Kerstin Gläser and
  • André Zimmermann
  • + 1 author+ 0 author

24 October 2022

This paper describes the characterization of inkjet-printed resistive temperature sensors according to the international standard IEC 61928-2. The goal is to evaluate such sensors comprehensively, to identify important manufacturing processes, and to...

(This article belongs to the Special Issue Temperature Sensors 2021-2023)
  • Article
  • Open Access
5 Citations
2,956 Views
14 Pages

Decoupling of Temperature and Strain Effects on Optical Fiber-Based Measurements of Thermomechanical Loaded Printed Circuit Board Assemblies

  • Tiago Maurício Leite,
  • Cláudia Freitas,
  • Roberto Magalhães,
  • Alexandre Ferreira da Silva and ,
  • José R. Alves,
  • Júlio C. Viana and
  • Isabel Delgado
  • + 2 authors+ 0 author

18 October 2023

This study investigated the use of distributed optical fiber sensing to measure temperature and strain during thermomechanical processes in printed circuit board (PCB) manufacturing. An optical fiber (OF) was bonded to a PCB for simultaneous measurem...

(This article belongs to the Special Issue Research Progress and Applications of Distributed Optical Fiber Sensing)
  • Article
  • Open Access
31 Citations
5,854 Views
11 Pages

Experimental Demonstration of Temperature Sensing with Packaged Glass Bottle Microresonators

  • Jonas Herter,
  • Valentin Wunderlich,
  • Christian Janeczka and
  • Vanessa Zamora

7 December 2018

Whispering gallery mode (WGM) glass bottle microresonators are potential highly sensitive structures for a variety of physical and bio-chemical sensing applications. In this paper, we experimentally demonstrate the practical use of glass bottle reson...

(This article belongs to the Special Issue Resonator Sensors 2018)
  • Article
  • Open Access
156 Views
20 Pages

31 October 2026

Printed thermoresistive sensors are strongly influenced by the sensing material, substrate, printing process and encapsulation. In this work, PEDOT:PSS temperature sensors were fabricated by inkjet printing on PET and glossy paper, while carbon-based...

(This article belongs to the Special Issue Recent Advances in Functional Nanomaterials for Sensing Applications)
  • Feature Paper
  • Article
  • Open Access
27 Citations
4,505 Views
10 Pages

Sustainable Fully Printed UV Sensors on Cork Using Zinc Oxide/Ethylcellulose Inks

  • Joana Figueira,
  • Cristina Gaspar,
  • José Tiago Carvalho,
  • Joana Loureiro and ,
  • Elvira Fortunato,
  • Rodrigo Martins and
  • Luís Pereira
  • + 2 authors+ 0 author

12 September 2019

Low-cost and large-scale production techniques for flexible electronics have evolved greatly in recent years, having great impact in applications such as wearable technology and the internet of things. In this work, we demonstrate fully screen-printe...

(This article belongs to the Special Issue Printable and Flexible Electronics for Sensors)
  • Article
  • Open Access
11 Citations
2,931 Views
21 Pages

24 September 2023

Novel and practical low-temperature 3D printing technology composed of a low-temperature 3D printing machine and optimized low-temperature 3D printing parameters was successfully developed. Under a low-temperature environment of 0–−20 &de...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
18 Citations
4,556 Views
10 Pages

Carbon Dots as Sensing Layer for Printed Humidity and Temperature Sensors

  • Almudena Rivadeneyra,
  • José F. Salmeron,
  • Fabio Murru,
  • Alejandro Lapresta-Fernández and ,
  • Noel Rodríguez,
  • Luis Fermín Capitan-Vallvey,
  • Diego P. Morales and
  • Alfonso Salinas-Castillo
  • + 3 authors+ 0 author

7 December 2020

This work presents an innovative application of carbon dots (Cdots) nanoparticles as sensing layer for relative humidity detection. The developed sensor is based on interdigitated capacitive electrodes screen printed on a flexible transparent polyeth...

(This article belongs to the Special Issue Functional Nanomaterials for Sensor Applications)

of 9