Skip to Content
You are currently on the new version of our website. Access the old version .

2,788 Results Found

  • Article
  • Open Access
4 Citations
3,115 Views
12 Pages

21 February 2024

In this work, a new use of mixed Ti-6Al-4V powder, consisting of the retained powder after screening for additive manufacturing and the recycled powder after multiple printing, has been exploited. The powder mixture has been hot-isostatically-pressed...

  • Article
  • Open Access
1 Citations
1,146 Views
16 Pages

17 June 2025

In this study, the effects of stearic acid coating concentration (0.85%, 1%, and 1.15% wt.) and storage duration (up to 30 days) on the flow properties of surface-modified micronized calcite powder were investigated to evaluate their implications for...

(This article belongs to the Special Issue Advanced Surface Engineering Materials: Characterization and Properties (2nd Edition))
  • Article
  • Open Access
1 Citations
800 Views
15 Pages

Oxidation Behavior of Direct Reduced Iron Powder During Ball-Milling Treatment

  • Qiao Liu,
  • Zhikai Liang,
  • Cheng Zhang,
  • Xinyu Fu and ,
  • Lingyun Yi,
  • Zhucheng Huang,
  • Jiayuan Li and
  • Jun Chen
  • + 3 authors+ 0 author

30 March 2026

High-quality direct reduced iron (DRI) powder is essential for applications in catalysis, adsorption, and electromagnetic materials. However, its tendency to reoxidize during processing presents a significant challenge. This study investigates the ox...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
1,310 Views
13 Pages

Bond Behavior Between Steel Bar and Reactive Powder Concrete Under Repeated Loading

  • Dewen Zhang,
  • Yanming Feng,
  • Ruihui Han,
  • Xiangsheng Kong and ,
  • Dehong Wang and
  • Chao Ren
  • + 1 author+ 0 author

16 April 2025

To investigate the influence of repeated loading on the bond behavior between steel bars and reactive powder concrete (RPC), this study conducted repeated loading tests on eight beam specimens and one static loading test as a control. The effects of...

(This article belongs to the Special Issue Sustainable and Low-Carbon Building Materials and Structures)
  • Article
  • Open Access
284 Views
13 Pages

Flow Characteristics and Hydration Behavior of CaO Powder for Basic Oxygen Furnace Injection Under Humidity and Temperature Environments

  • Hyunjo Yoo,
  • Juyoung Kim,
  • Dongyeop Shin,
  • Sanghyeon Yoon and ,
  • Kunmo Koo and
  • Heesoo Lee
  • + 1 author+ 0 author

We investigated the effects of relative humidity (30–80%) and temperature (5–35 °C) on the flow characteristics and hydration behavior of CaO powder used for basic oxygen furnace injection. We measured the untapped and tapped densitie...

  • Article
  • Open Access
5 Citations
2,294 Views
17 Pages

Compressive and Tensile Behavior of High-Ductility Alkali-Activated Composites with Polyethylene Terephthalate Powder

  • Fei Meng,
  • Shen Luo,
  • Jingxian Sun,
  • Cheng Zhang and ,
  • Leilei Xu,
  • Yankun Du,
  • Junfeng Zeng and
  • Yongchang Guo
  • + 3 authors+ 0 author

Researchers have been engaged in the study of high-ductility concrete (HDC) due to its excellent ductility and cracking control ability. This study combines the concepts of HDC and alkali-activated composites (AAC) to develop high-ductility alkali-ac...

(This article belongs to the Special Issue Next-Gen Cementitious Composites for Sustainable Construction)
  • Feature Paper
  • Article
  • Open Access
8 Citations
2,215 Views
14 Pages

The Effect of Hot Oscillatory Pressing Temperature on Microstructure and Tensile Behavior of Powder Metallurgy Superalloy

  • Guizhong Li,
  • Dejian Sun,
  • Jiachen Kang,
  • Yang Gao and ,
  • Xuewei Yan,
  • Qiancheng Gao and
  • Ka Gao
  • + 2 authors+ 0 author

30 September 2022

The effect of the hot oscillatory pressing (HOPing) temperature on the microstructure and tensile behavior of the powder metallurgy superalloys was investigated and compared with those of the hot pressed (HPed) sample. The results show that as the HO...

(This article belongs to the Special Issue Solidification and Casting of Engineering Metals: Modeling and Simulation)
  • Article
  • Open Access
2 Citations
2,788 Views
15 Pages

24 August 2024

This study explores the effects of the powder-to-liquid ratio on the performance characteristics of lost foam casting coatings. The investigation focuses on how variations in this ratio affect key properties, including apparent viscosity, shear thinn...

(This article belongs to the Special Issue Effects of Surface Layer Modification on Fatigue, Corrosion and Wear Behavior of Metallic Materials)
  • Article
  • Open Access
1 Citations
1,665 Views
18 Pages

Anisotropic Behavior in Microstructures and Properties of Refractory Tungsten Metal Produced by Laser Powder Bed Fusion

  • Jinguo Ge,
  • Heming Wu,
  • Hongsen Liu,
  • Yanan Zhu and ,
  • Yan Chen,
  • Wangwei Zhan,
  • Liang Zhang and
  • Zhuming Liu
  • + 3 authors+ 0 author

21 August 2025

This work employed laser powder bed fusion (LPBF) technology to prepare pure tungsten (W) metal components and investigated their internal defects, microstructural characteristics and mechanical properties within the horizontal and vertical planes to...

(This article belongs to the Special Issue Advances in 3D Printing Technologies: Design, Manufacturing, and Applications)
  • Article
  • Open Access
18 Citations
3,134 Views
15 Pages

11 April 2023

A systematic study on the densification behavior and build quality of 2205 duplex stainless steel fabricated using laser powder bed fusion (LPBF) was performed by experiment and simulation, aiming to offer some supplementary work for research on addi...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
430 Views
26 Pages

Anisotropy in Microstructure and Corrosion Behavior of NiTi Alloys Produced by Laser Powder Bed Fusion

  • Chenglong Teng,
  • Yi-Fan Zhang,
  • Hui Xiao,
  • Yun-Fei Pei and
  • Liang-Yu Chen

2 July 2026

Laser powder bed fusion (LPBF) induces pronounced microstructural anisotropy in NiTi alloys, which strongly governs their corrosion behavior in physiological environments. Here, the orientation-dependent microstructure and corrosion performance of LP...

(This article belongs to the Special Issue Microstructural and Corrosion Aspects in Additive Manufacturing of Alloys and Steel)
  • Article
  • Open Access
7 Citations
3,827 Views
15 Pages

Effects of Ultrasound-Assisted Soy Lecithin Addition on Rehydration Behavior and Physical Properties of Egg White Protein Powder

  • Sijia Cao,
  • Xuanting Liu,
  • Zhiyuan Zheng,
  • Zhaohui Yan and ,
  • Ting Zhang,
  • Jingbo Liu and
  • Ting Yu
  • + 2 authors+ 0 author

17 July 2024

This study investigated the effects of ultrasound-assisted soybean lecithin (SL) on the rehydration behavior and physical properties of egg white protein powder (EWPP) and its ability to enhance the efficacy of EWPP instant solubility. The results of...

(This article belongs to the Special Issue Eggs and Egg Products: Production, Processing, and Safety)
  • Proceeding Paper
  • Open Access
1 Citations
2,061 Views
6 Pages

Prefabricated and non-load bearing sandwich façade elements were developed using Textile Reinforced Reactive Powder Concrete (TRRPC) along with low density Foamed Concrete (FC) and Glass Fiber Reinforced Polymer (GFRP) continuous connecting devices....

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
4 Citations
1,751 Views
18 Pages

25 August 2024

High-performance concrete (HPC) is commonly used in the main structures of bridges. HPC is widely applied in the main structures of bridges, yet some skepticism remains with integrating fly ash and mineral powder as admixtures into prestressed HPC br...

  • Article
  • Open Access
12 Citations
4,890 Views
14 Pages

1 February 2019

The hot workability of metallic materials is significantly dependent on its ability to form plastic without cracking and fracturing. In this work, the cracking behavior of powder metallurgy (PM) Ti-5Al-5Mo-5V-3Cr (Ti-5553) alloy, consolidated from po...

  • Article
  • Open Access
11 Citations
3,333 Views
12 Pages

7 April 2023

The mechanical properties of laser powder bed fused (LPBFed) Invar 36 alloy have been limited by the presence of manufacturing defects. It is imperative to investigate the influence of these defects on the mechanical behavior of LPBFed Invar 36 alloy...

(This article belongs to the Special Issue Modern Experimental and Measurement Methods for Mechanics of Materials)
  • Article
  • Open Access
1,748 Views
31 Pages

Mechanical Behavior of Large Symmetric Fiber Reinforced Polymer-Reactive Powder Concrete Composite Tanks with Floating Tops

  • Jing Ji,
  • Kexin Yu,
  • Liangqin Jiang,
  • Yingchun Liu and ,
  • Zhanbin Zhang,
  • Xuan Chu,
  • Jiaqi Li and
  • Huiling Zhang
  • + 3 authors+ 0 author

29 December 2023

In order to investigate the mechanical behavior of FRP-reactive powder concrete composite tanks with floating tops (FRPCTs) subjected to gravity, twenty-two full-scale FRPCTs were designed with varying parameters for the inner diameter of the storage...

  • Article
  • Open Access
13 Citations
3,236 Views
16 Pages

Microstructural Evolution, Mechanical Properties and Tribological Behavior of B4C-Reinforced Ti In Situ Composites Produced by Laser Powder Bed Fusion

  • Jingguang Du,
  • Yaojia Ren,
  • Xinyan Liu,
  • Feng Xu and ,
  • Xiaoteng Wang,
  • Runhua Zhou,
  • Ian Baker and
  • Hong Wu
  • + 3 authors+ 0 author

7 July 2023

Based on the advantage of rapid net-shape fabrication, laser powder bed fusion (LPBF) is utilized to process B4C-reinforced Ti composites. The effect of volumetric energy density (VED) on the relative density, microstructural evolution, tensile prope...

(This article belongs to the Special Issue Recent Advances in Metal Powder Based Additive Manufacturing)
  • Article
  • Open Access
7 Citations
2,815 Views
12 Pages

20 June 2022

Powder extrusion printing (PEP) is an attractive fabrication technique for the automated mass production of engineering components with complicated shape and high-dimensional accuracy. This paper is concerned with PEP and sintering densification of u...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
9 Citations
4,017 Views
19 Pages

20 August 2022

A Cu–15Fe alloy was fabricated using a powder metallurgy (PM) route, with the addition of different solid lubricants (i.e., paraffin wax (PW) and stearic acid (SA) as well as their composites (PW+SA)). Green compacts were produced via cold comp...

  • Article
  • Open Access
9 Citations
5,563 Views
12 Pages

Tailored Time–Temperature Transformation Diagram for IN718 Alloy Obtained via Powder Bed Fusion Additive Manufacturing: Phase Behavior and Precipitation Dynamic

  • Julio Cesar Franco-Correa,
  • Enrique Martínez-Franco,
  • Celso Eduardo Cruz-González,
  • Juan Manuel Salgado-López and
  • Jhon Alexander Villada-Villalobos

22 November 2023

Experimental and computational approaches were used to study the microstructure of IN718 produced via powder bed fusion additive manufacturing (PBF-AM). The presence, chemical composition, and distribution of stable and metastable phases (γ&pri...

(This article belongs to the Special Issue Recent Advances in Metal Powder Based Additive Manufacturing)
  • Article
  • Open Access
7 Citations
2,694 Views
18 Pages

Effects of In Situ TiB2 on the Microstructural Evolution, Mechanical Properties, and Friction Behavior of the Al-Si-Cu Alloys Processed by Laser Powder-Bed Fusion

  • Zhongxue He,
  • Jianying Wang,
  • Mengzhen Zhu,
  • Tao Wen and ,
  • Feipeng Yang,
  • Shouxun Ji,
  • Jianming Zheng,
  • Ling Shan and
  • Hailin Yang
  • + 4 authors+ 0 author

5 September 2024

In the present study, the densification behavior, microstructural evolution, mechanical properties, and friction behavior of a TiB2/Al8SiCu composite and Al8SiCu alloy manufactured by laser powder-bed fusion (PBF-LB) were systematically investigated....

  • Review
  • Open Access
2 Citations
907 Views
19 Pages

Metal additive manufacturing relies on fine powders whose properties influence flow, spreading, and airborne release during processing, yet published data on powder characteristics, reuse effects, and emissions remain fragmented and difficult to comp...

  • Article
  • Open Access
1 Citations
774 Views
23 Pages

8 June 2026

This work systematically investigates the effects of various heat treatment regimes, including solution treatment, solution treatment followed by aging at 623 K, 723 K and 823 K, and direct aging at the same temperatures, on the solidified microstruc...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
28 Citations
4,218 Views
14 Pages

22 November 2022

Laser powder bed fusion (LPBF) is an emerging technique for the fabrication of triply periodic minimal surface (TPMS) structures in metals. In this work, different TPMS structures such as Diamond, Gyroid, Primitive, Neovius, and Fisher–Koch S w...

(This article belongs to the Special Issue Design and Post Processing for Metal Additive Manufacturing)
  • Article
  • Open Access
4 Citations
3,231 Views
11 Pages

Spark Plasma Sintering Behavior of Nb-Mo-Si Alloy Powders Fabricated by Hydrogenation-Dehydrogenation Method

  • Sung Yong Lee,
  • Ki Beom Park,
  • Jang-Won Kang,
  • Yanghoo Kim and ,
  • Hyun-Su Kang,
  • Tae Kwon Ha,
  • Seok-Hong Min and
  • Hyung-Ki Park
  • + 3 authors+ 0 author

29 October 2019

In this study, the sintering behaviors of Nb-6Mo-20Si-3Cr (at percentage) in situ composite powders were studied. The Nb alloy powder was fabricated by a hydrogenation-dehydrogenation method, and both the alloy ingot and powders consisted of two phas...

  • Article
  • Open Access
36 Citations
9,798 Views
17 Pages

Impact of Powder Properties on the Rheological Behavior of Excipients

  • Pauline H. M. Janssen,
  • Sébastien Depaifve,
  • Aurélien Neveu,
  • Filip Francqui and
  • Bastiaan H. J. Dickhoff

With the emergence of quality by design in the pharmaceutical industry, it becomes imperative to gain a deeper mechanistic understanding of factors impacting the flow of a formulation into tableting dies. Many flow characterization techniques are pre...

(This article belongs to the Special Issue Recent Advances in Secondary Processing of Pharmaceutical Powders)
  • Article
  • Open Access
3 Citations
1,546 Views
19 Pages

Investigation of Ti65 Powder Spreading Behavior in Multi-Layer Laser Powder Bed Fusion

  • Zhe Liu,
  • Ju Wang,
  • Ge Yu,
  • Xiaodan Li and ,
  • Meng Li,
  • Xizhong An,
  • Jiaqiang Ni,
  • Haiyang Zhao and
  • Qianya Ma
  • + 4 authors+ 0 author

31 May 2025

Powder bed fusion using a laser beam (PBF-LB) offers a suitable alternative to manufacturing Ti65 with intricate geometries and internal structures in hypersonic aerospace applications. However, issues such as undesirable surface roughness, defect fo...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
1 Citations
1,172 Views
15 Pages

Densification Behavior and Microstructure of Nickel Aluminum Bronze Alloy Fabricated by Laser Powder Bed Fusion

  • Yizhe Huang,
  • Guanjun Fu,
  • An Wang,
  • Zhongxu Xiao and ,
  • Jinfeng Sun,
  • Jun Wang and
  • Xiaojia Nie
  • + 2 authors+ 0 author

5 January 2026

Nickel–Aluminum–Bronze (NAB) has gained significant attention in marine applications due to its excellent corrosion resistance and has shown growing potential for laser powder bed fusion (L-PBF) additive manufacturing. However, research o...

(This article belongs to the Section Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
10 Citations
4,356 Views
14 Pages

21 July 2022

Understanding the impact of powder reuse in powder-bed-fusion electron beams (PBF-EB) is key to maintain the processability and yield. Powder oxidation, due to exposure to high temperatures for a prolonged period of time, can lead to a decrease in el...

(This article belongs to the Special Issue Metal Powder for Additive Manufacturing: Manufacturing, Properties and Degradation)
  • Article
  • Open Access
3 Citations
1,913 Views
28 Pages

Cyclic Behavior of Joints Assembled Using Prefabricated Beams and Columns with High-Ductility Recycled Powder Concrete

  • Xiuling Li,
  • Haodong Sun,
  • Kezhen Chen,
  • Tianfeng Yuan and ,
  • Long Wen,
  • Xiaowei Zheng and
  • Tongxing Bu
  • + 2 authors+ 0 author

The integration of recycled powder (RP) as a partial cement replacement in concrete, combined with fiber reinforcement, facilitates the development of high-ductility recycled powder concrete (HDRPC) with enhanced mechanical properties. This approach...

(This article belongs to the Special Issue Structural Reliability, Resilience and Design of Buildings against Multi-hazards)
  • Article
  • Open Access
22 Citations
8,466 Views
33 Pages

Moisture Behavior of Pharmaceutical Powder during the Tableting Process

  • Komlan Koumbogle,
  • Ryan Gosselin,
  • François Gitzhofer and
  • Nicolas Abatzoglou

The moisture content of pharmaceutical powder is a key parameter contributing to tablet sticking during the tableting process. This study investigates powder moisture behavior during the compaction phase of the tableting process. Finite element analy...

(This article belongs to the Section Pharmaceutical Technology, Manufacturing and Devices)
  • Article
  • Open Access
6 Citations
4,922 Views
14 Pages

Effect of Microscopic Properties on Flow Behavior of Industrial Cohesive Powder

  • Maheandar Manokaran,
  • Martin Morgeneyer and
  • Dominik Weis

25 June 2024

The characteristics of powders on a bulk scale are heavily influenced by both the material properties and the size of their primary particles. Throughout the stages of storage and transportation in the powder processing industry, various forms of def...

  • Article
  • Open Access
8 Citations
3,866 Views
15 Pages

Electrochemical Corrosion Behavior of Pure Mg Processed by Powder Metallurgy

  • Jozef Minda,
  • Stanislava Fintová,
  • Branislav Hadzima,
  • Pavel Doležal and ,
  • Michaela Hasoňová,
  • Leoš Doskočil and
  • Jaromír Wasserbauer
  • + 2 authors+ 0 author

19 August 2021

Pure Mg samples were prepared by powder metallurgy using the cold and hot compacting methods. Cold compacted pure Mg (500 MPa/RT) was characterized by 5% porosity and the mechanical bonding of powder particles. Hot compacted samples (100 MPa/400 °C a...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
6 Citations
2,660 Views
19 Pages

30 April 2025

A single batch of AlSi10Mg powder was used to fabricate two groups of round bars via horizontal printing, employing an identical strategy except for one parameter in the process of powder bed fusion-laser beam. The parameter is layer thickness, set a...

(This article belongs to the Special Issue Fatigue and Fracture of Crystalline Metal Structures)
  • Article
  • Open Access
21 Citations
3,588 Views
13 Pages

Influence of Post Heat Treatment Condition on Corrosion Behavior of 18Ni300 Maraging Steel Manufactured by Laser Powder Bed Fusion

  • Kichang Bae,
  • Dongmin Shin,
  • Jun-Ho Kim,
  • Wookjin Lee and ,
  • Ilguk Jo and
  • Junghoon Lee
  • + 1 author+ 0 author

15 November 2022

Laser powder bed fusion (LPBF) is a promising additive-manufacturing process for metallic materials. It has the advantage of flexibility in product design, such that various mechanical parts can be fabricated. However, because metal parts are built-u...

(This article belongs to the Special Issue Laser Additive Manufacturing of Metallic Materials)
  • Article
  • Open Access
557 Views
34 Pages

Effect of Heat Treatment on the Corrosion and Wear Behavior of Hastelloy C276 Alloy Fabricated via Laser Powder Bed Fusion

  • Xiao Fang,
  • Zitong Wang,
  • Changqing Ye,
  • Yang Li and ,
  • Liping Zhang,
  • Jianzhong Yang,
  • Shulong Ye,
  • Xin Shang,
  • Dingning Wang and
  • Bingwen Lu
  • + 7 authors+ 2 authors

1 June 2026

Traditional C276 alloy plates exhibit relatively poor wear resistance. Consequently, in high-wear service environments, they typically require reinforcement through additional surface coatings or wear-resistant materials. To further expand the applic...

(This article belongs to the Special Issue Additive Manufacturing of Metals and Alloys: Microstructure and Mechanical Properties—Second Edition)
  • Article
  • Open Access
585 Views
19 Pages

3 June 2026

Mechanically milled Ti80Ni20 powders were compacted and sintered at various temperatures after being milled for 9 h in a protective atmosphere. Scanning electron microscopy (SEM) was used to evaluate the morphology of the surfaces. Oscillating fricti...

  • Article
  • Open Access
21 Citations
5,226 Views
21 Pages

29 July 2020

Up to now, laser-sintered components have been barely used by industries such as aerospace and transport industry due to high flammability. By the use of flame retardants, the flammability of laser-sintered parts should be reduced to extend their ran...

(This article belongs to the Special Issue 3D/4D Printing with Polymers, Polymer Hydrogels and Adaptive Soft Materials)
  • Article
  • Open Access
5 Citations
3,067 Views
11 Pages

2 September 2022

The handling of bulk solids in the form of powders is a fundamental process in a wide range of manufacturing industries, such as the automotive, aerospace, food, and healthcare sectors. All these sectors employ additive manufacturing (AM), as it enab...

(This article belongs to the Special Issue Challenges of Applying Discrete Element Method (DEM) to Industrial Applications)
  • Article
  • Open Access
3 Citations
2,054 Views
14 Pages

26 April 2024

Multi-material additive manufacturing using heterogeneous powders as raw materials is one of the important development directions of metal additive manufacturing technology. The evaporation behavior of heterogeneous powders in the selective laser mel...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1,728 Views
22 Pages

30 March 2026

Caking and powder adhesion are widespread challenges in dry powder processes. The influence of process parameters such as humidity and temperature on the adhesion behavior of dry powders has been extensively studied in numerous studies. Besides that,...

  • Article
  • Open Access
4 Citations
4,076 Views
10 Pages

A novel anode consisting of a mixture of Cu powder and LiCl/Li13In3-coated Li powder was developed and tested for use in Li metal secondary batteries (LMSBs). The aim was to improve the electrochemical performance as suppress dendrite formation and v...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
7 Citations
3,511 Views
11 Pages

High Temperature Oxidation Behaviors of Powder Metallurgical γ-TiAl Based Alloys: Effects of Surface Defects on Morphology of the Oxide Scale

  • Ziteng Su,
  • Xiaolei Song,
  • Zhenxin Duan,
  • Hua Chen and ,
  • Haoxuan Huang,
  • Yang Liu and
  • Ying Han
  • + 2 authors+ 0 author

17 October 2022

In the present work, γ-TiAl-based alloys with nominal composition of Ti-48Al-2Cr-2Nb (at.%) were prepared by vacuum hot pressing sintering using pre-alloyed powders under different pressures. The alloys were oxidized under cyclic conditions at...

(This article belongs to the Special Issue Corrosion and Protection of Lightweight Engineering Materials: Mg Alloys, Al Alloys, Ti Alloys and Other Related Metals)
  • Article
  • Open Access
30 Citations
5,715 Views
12 Pages

Analysis of Tribo-Charging during Powder Spreading in Selective Laser Sintering: Assessment of Polyamide 12 Powder Ageing Effects on Charging Behavior

  • Nicolas Hesse,
  • Maximilian A. Dechet,
  • Juan S. Gómez Bonilla,
  • Christian Lübbert and ,
  • Stephan Roth,
  • Andreas Bück,
  • Jochen Schmidt and
  • Wolfgang Peukert
  • + 3 authors+ 0 author

3 April 2019

Powder flowability is key to achieving high process stability and part quality by application of smooth and dense layers in selective laser sintering (SLS). This study sheds light on the rarely investigated effect of tribo-electric charge build-up du...

(This article belongs to the Collection Assessment of the Ageing and Durability of Polymers)
  • Article
  • Open Access
4 Citations
2,453 Views
13 Pages

25 September 2022

To investigate the effects of limestone powder and gypsum on the early hydration of ye’elimite, the hydration behavior of C4A3S¯-LP-CaSO4·2H2O-H2O systems are researched. The hydration behavior of systems are researched by employing...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
2,053 Views
16 Pages

16 July 2025

Amorphous boron powder, as a high-energy fuel, is widely used in the energy sector. However, its ignition and combustion difficulties have long limited its performance in propellants, explosives, and pyrotechnics. In this study, Mg/Al-coated boron po...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
3 Citations
1,002 Views
19 Pages

7 February 2026

The quality of the feedstock powder plays a key role in determining the properties of coatings produced by cold spray (CS). However, most commercially available powders are not specifically designed for CS, which makes it difficult to tailor powder c...

  • Article
  • Open Access
21 Citations
5,777 Views
9 Pages

Oxygen Reduction Behavior of HDH TiH2 Powder during Dehydrogenation Reaction

  • Ki Beom Park,
  • Jaeho Choi,
  • Tae-Wook Na,
  • Jang-Won Kang and ,
  • Kwangsuk Park and
  • Hyung-Ki Park
  • + 1 author+ 0 author

27 October 2019

In this study, oxygen reduction behavior of TiH2 powders during dehydrogenation process was investigated based on thermodynamics. During the hydrogenation–dehydrogenation (HDH) method to fabricate Ti powder, TiH2 was formed from a Ti sponge thr...

  • Article
  • Open Access
74 Citations
5,147 Views
20 Pages

Complex Characterization and Behavior of Waste Fired Brick Powder-Portland Cement System

  • Viviana Fátima Rahhal,
  • Mónica Adriana Trezza,
  • Alejandra Tironi,
  • Claudia Cristina Castellano and ,
  • Milena Pavlíková,
  • Jaroslav Pokorný,
  • Edgardo Fabian Irassar,
  • Ondřej Jankovský and
  • Zbyšek Pavlík
  • + 4 authors+ 0 author

21 May 2019

Two waste fired brick powders coming from brick factories located in Argentine and Czech Republic were examined as alternative mineral admixtures for the production of blended cements. In pastes composition, local Portland cements (Argentine and Czec...

(This article belongs to the Section Construction and Building Materials)

of 56