Skip to Content

7,714 Results Found

  • Article
  • Open Access
11 Citations
3,563 Views
17 Pages

28 January 2023

The biaxial behavior of PEF has been analyzed for equilibrated and simultaneous biaxial stretching. The ability of PEF to develop an organized microstructure through strain induced crystallization (SIC) has been described. Upon biaxial stretching, SI...

(This article belongs to the Special Issue State-of-the-Art Polymer Science and Technology in France (2022, 2023))
  • Article
  • Open Access
3 Citations
1,612 Views
16 Pages

Carbonation Curing of Semi-Dry Flue Gas Desulfurization Ash for CO2 Sequestration: Microstructural Evolution and Strength Development of Alkali-Rich Industrial Waste

  • Amer Baras,
  • Jiajie Li,
  • Keqing Li,
  • Xinli Mu and ,
  • Ali M. Onaizi,
  • Yunye Cao,
  • Hocine Heraiz,
  • Ayoub Elajjani,
  • Huihui Du and
  • Michael Hitch
  • + 6 authors+ 1 author

28 January 2026

Semi-dry desulfurization ash (SDA) is generated in rapidly increasing quantities and remains underutilised, despite its high CaO content, which makes it a promising candidate for CO2 storage via carbonation curing. However, the carbonation behaviour...

(This article belongs to the Section Environmental Mineralogy and Biogeochemistry)
  • Article
  • Open Access
8 Citations
3,405 Views
17 Pages

Microstructure Development in Artificially Cemented, Fine-Grained Soils

  • Simon Oberhollenzer,
  • Andre Baldermann,
  • Roman Marte,
  • Djemil Mahamat Moussa Tahir and ,
  • Franz Tschuchnigg,
  • Martin Dietzel and
  • Manfred Nachtnebel
  • + 2 authors+ 0 author

5 September 2022

Fine-grained sedimentary deposits can bear an increased risk for building settlements due to their moderate stiffness and strength properties, as well as high groundwater tables. However, some buildings, e.g., situated on shallow foundations in Alpin...

(This article belongs to the Collection New Advances in Geotechnical Engineering)
  • Article
  • Open Access
14 Citations
3,441 Views
16 Pages

On the Microstructure Development under Cyclic Temperature Conditions during WAAM of Microalloyed Steels

  • Chang Huang,
  • Mohamed Soliman,
  • Kai Treutler,
  • Volker Wesling and
  • Karl-Heinz Spitzer

8 November 2022

This paper shed light on the kinetics of transformation and the developed microstructure during wire arc additive manufacturing (WAAM). Three microalloyed alloys, two of them are high strength low alloyed steel (HSLA) grades and the third is a Ni-Cr-...

(This article belongs to the Special Issue Alloy and Process Design of Metallic Materials)
  • Article
  • Open Access
1 Citations
4,261 Views
16 Pages

13 September 2024

The current study investigates the development of a replica molding process for hypervariable microstructures. Initially, the mold deformation theory for these hypervariable microstructures was derived. Based on this theory, a metal material with mag...

(This article belongs to the Special Issue Low-Carbon Design and Manufacturing Processes)
  • Article
  • Open Access
85 Citations
7,165 Views
15 Pages

19 April 2018

The microstructure evolution and strength development of cemented tailings backfill (CTB), mixed with plant tailings and cement, is critical to a more thorough and complete understanding of its functionality as a support structure in underground mini...

(This article belongs to the Special Issue Backfilling Materials for Underground Mining)
  • Article
  • Open Access
2 Citations
442 Views
18 Pages

Mechanism Study on the Effects of Yellow River Sediment Silt Powder on Hydration, Microstructure, and Strength Development of Shotcrete

  • Ge Zhang,
  • Xin Wang,
  • Jialing Li,
  • Kunpeng Li and ,
  • Yuanjian Wang,
  • Ali Raza and
  • Chengfang Yuan
  • + 2 authors+ 0 author

28 May 2026

To investigate the influence mechanism of Yellow River silt powder on the hydration process, microstructure, and strength development of shotcrete, and to promote the resource utilization of Yellow River sediment, this study systematically investigat...

(This article belongs to the Special Issue Advances in Hydration, Microstructure, and Properties of Modern Cement and Concrete Composites)
  • Article
  • Open Access
1 Citations
1,231 Views
16 Pages

26 March 2026

This paper presents a systematic investigation into the long-term mechanical property development, water absorption behavior, and microstructural characteristics of hybrid glass and polypropylene fiber-reinforced concrete (HGPFRC). The findings provi...

  • Article
  • Open Access
18 Citations
6,788 Views
12 Pages

Influence of ZrO2 Nanoparticles on the Microstructural Development of Cement Mortars with Limestone Aggregates

  • Danna L. Trejo-Arroyo,
  • Karen E. Acosta,
  • Julio C. Cruz,
  • Ana M. Valenzuela-Muñiz and ,
  • Ricardo E. Vega-Azamar and
  • Luis F. Jiménez
  • + 1 author+ 0 author

12 February 2019

In this research, the effect of the addition of zirconium oxide-synthesized nanoparticles on the microstructural development and the physical–mechanical properties of cement mortars with limestone aggregates was studied. Zirconia nanoparticles...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
2 Citations
1,726 Views
23 Pages

Plastic Concrete is a low-strength (fcm,28d ≤ 1.0 MPa), low-stiffness impervious concrete used for cut-off walls in earthen dams worldwide. These properties are achieved through a very high w/c ratio (w/c ≥ 3.0) and water-binding additions (e.g...

  • Feature Paper
  • Article
  • Open Access
19 Citations
6,978 Views
20 Pages

23 June 2022

The present study investigates the effects of Al content and solidification thermal parameters on the microstructural development under transient heat flow conditions for two hypereutectic Zn–Al alloys: Zn-6wt.%Al and Zn-11wt.%Al. The alloys we...

(This article belongs to the Special Issue Microstructure, Mechanical Properties and Solidification Behavior of Metals and Alloys)
  • Article
  • Open Access
13 Citations
3,656 Views
16 Pages

30 June 2021

The microstructures of additively manufactured Sc- and Zr-modified aluminum alloys are significantly influenced by the nucleation role of solid intermetallic particles in undercooled liquid. To replicate such effects, a precipitation model relying on...

(This article belongs to the Special Issue Simulation of Microstructure Evolution in Additive Manufacturing)
  • Feature Paper
  • Review
  • Open Access
6 Citations
5,773 Views
28 Pages

Soft-Tissue Material Properties and Mechanogenetics during Cardiovascular Development

  • Hummaira Banu Siddiqui,
  • Sedat Dogru,
  • Seyedeh Samaneh Lashkarinia and
  • Kerem Pekkan

During embryonic development, changes in the cardiovascular microstructure and material properties are essential for an integrated biomechanical understanding. This knowledge also enables realistic predictive computational tools, specifically targeti...

(This article belongs to the Special Issue Comparative Developmental Cardiovascular Biomechanics and Bioengineering)
  • Article
  • Open Access
370 Views
19 Pages

Mechanism of Strength Development and Microstructural Evolution of KDJ-II–Cement Composite-Stabilized Soil for Loess Base Courses

  • Hongjuan Wu,
  • Bangxuan Zhao,
  • Xiaohui Niu,
  • Rui Wang and ,
  • Wei Zhang,
  • Yanmei Tong and
  • Chenggui Chen
  • + 2 authors+ 0 author

5 June 2026

Rural road construction in the loess region of Gansu Province is constrained by aggregate shortage, high material transportation costs, and the limited early performance of cement-stabilized soil. In this study, KDJ-II stabilizer and cement were used...

(This article belongs to the Special Issue Recent Research in Frozen Soil Mechanics and Cold Regions Engineering)
  • Article
  • Open Access
1 Citations
2,675 Views
13 Pages

The Influence of the Size of BN NSs on Silkworm Development and Tissue Microstructure

  • Vivian Andoh,
  • Haiyan Liu,
  • Liang Chen,
  • Lin Ma and
  • Keping Chen

27 April 2023

Boron nitride nanosheets (BN NSs) have emerged as promising materials in a wide range of biomedical applications. Despite the extensive studies on these bio-nano interfacial systems, one critical concern is their toxicity, which is affected by a vari...

(This article belongs to the Special Issue Ecotoxicity Assessment of Nanomaterials: Latest Advances and Prospects)
  • Article
  • Open Access
2,248 Views
13 Pages

9 February 2026

Microwave sintering technology is widely regarded as one of the most promising construction techniques for in situ resource utilization in lunar bases due to its high energy efficiency and unique heating mechanism. However, the extremely low-temperat...

(This article belongs to the Topic Advanced Materials and Manufacturing for Extreme Environments in Energy and Aerospace)
  • Article
  • Open Access
1 Citations
2,163 Views
18 Pages

18 March 2021

In the rolling process of heavy cylinders, the deformation section is subjected to the effects of compression and shear. In order to analyze the influences of the shear effect on the microstructure evolution characteristics, a mathematical model was...

  • Article
  • Open Access
427 Views
16 Pages

2 September 2026

This study developed alkali-activated binders based on biomass power plant ash (BPPA) and ground granulated blast furnace slag (GGBFS) for potential application in coal-mine goaf backfilling. Five precursor proportions, ranging from 100% BPPA to 100%...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
1 Citations
633 Views
21 Pages

Microstructural Evolution and Strength Development of High-Water-Content Soft Soils Stabilized with Cementitious–Expansive Binders

  • Youmin Han,
  • Yunlong Zhao,
  • Beiping Han,
  • Li Jiang and ,
  • Hongfei Chang and
  • Junwu Xia
  • + 1 author+ 0 author

2 July 2026

This study experimentally investigated the stabilization mechanisms and structure formation models of high-water-content soft soils (>70%) treated with ordinary Portland cement, sulfur aluminate cement, gypsum, and lime. Fifteen single- and compos...

(This article belongs to the Special Issue Microstructure Evolution, Mechanical Performance and Durability of Concrete and Cementitious Composites)
  • Article
  • Open Access
19 Citations
8,755 Views
23 Pages

20 August 2012

Zr, Nb, and Ta as alloying elements for Ti alloys are important for attaining superior corrosion resistance and biocompatibility in the long term. However, note that the addition of excess Nb and Ta to Ti alloys leads to higher manufacturing cost. To...

(This article belongs to the Special Issue Titanium Materials for Biomedical Application)
  • Article
  • Open Access
3 Citations
4,747 Views
13 Pages

1 September 2021

Plastic-metal joints with a laser-structured metal surface have a high potential to reduce cost and weight compared to conventional joining technologies. However, their application is currently inhibited due to the absence of simulation methods and m...

(This article belongs to the Special Issue Laser Processing for Composite Materials)
  • Article
  • Open Access
204 Views
25 Pages

Distribution Characteristics and Interaction Mechanisms of In Situ Stress Field, Microstructures, and Fractures in the Zhengzhuang Block

  • Yuting Wang,
  • Cong Zhang,
  • Yanhui Yang,
  • Mengxi Li and ,
  • Pei Wang,
  • Guangjie Sang,
  • Xinglong Lei,
  • Yan Wang,
  • Baolin Yang and
  • Yunfei Wen
  • + 6 authors+ 1 author

16 October 2026

To clarify the distribution patterns and interaction mechanisms of the in situ stress field, microstructures, and fractures and to provide geological support for efficient coal-bed methane (CBM) development in the Zhengzhuang Block, this study invest...

(This article belongs to the Special Issue Novel Advances in Coal Geology and Exploration)
  • Article
  • Open Access
16 Citations
6,146 Views
21 Pages

17 May 2018

This study investigates the effects of set retarders on the properties of polymer-modified calcium sulfoaluminate (CSA) and Portland cement blend systems at early and long-term ages. The fast setting of the cement blend systems is typically adjusted...

(This article belongs to the Special Issue Materials: 10th Anniversary)
  • Article
  • Open Access
1 Citations
747 Views
24 Pages

27 February 2026

Addressing the challenges of multi-parameter interactions and unclear micro-mechanisms in poplar biomass panel manufacturing, this study employed a multi-scale approach integrating statistical optimization, microstructural characterization, and mecha...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
12 Citations
14,368 Views
16 Pages

Ontogeny and Anatomy of the Dimorphic Pitchers of Nepenthes rafflesiana Jack

  • Rachel Schwallier,
  • Valeri van Wely,
  • Mirna Baak,
  • Rutger Vos and ,
  • Bertie Joan van Heuven,
  • Erik Smets,
  • Rogier R. van Vugt and
  • Barbara Gravendeel
  • + 3 authors+ 0 author

18 November 2020

An enigmatic feature of tropical pitcher plants belonging to the genus Nepenthes is their dimorphic prey-capturing pitfall traps. In many species, the conspicuously shaped upper and lower pitchers grow from a swollen leaf tendril tip until finally op...

(This article belongs to the Special Issue Plant Anatomy and Biochemistry)
  • Article
  • Open Access
1 Citations
679 Views
22 Pages

Recycled Aggregates Influence on the Mechanical Properties of Cement Lime-Based Mortars Part II

  • Ioan Sorin Letiu,
  • Catalin Saitis,
  • Daniela Lucia Manea,
  • Claudiu Aciu and ,
  • Marioara Moldovan,
  • Stanca Cuc and
  • Ioan Petean
  • + 2 authors+ 0 author

31 March 2026

In the current framework of sustainable development, stricter international regulations are shaping waste management practices, particularly in the construction sector—one of the main generators of waste. This study investigates the reuse of de...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
10 Citations
3,920 Views
12 Pages

9 May 2020

Cottonid is a layered material based 100% on cellulose that holds excellent material properties by being completely sustainable. The finite nature of petroleum-based resources nowadays makes these properties significant for technical applications aga...

  • Article
  • Open Access
2 Citations
2,418 Views
16 Pages

26 September 2021

Two different analytic models, in which convection in the float zone is assumed, are developed to understand the solute redistributions during general seeding and quasi-seeding processes of TiAl alloys, respectively. The results suggest that the solu...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
1 Citations
541 Views
23 Pages

31 August 2026

This study evaluated the mechanical properties and microstructural characteristics of concrete made with recycled concrete aggregates (RCAs) derived from a pier exposed to a tropical marine environment for more than 20 years. The RCA was characterize...

(This article belongs to the Special Issue Microstructure and Properties of Sustainable Cement and Concrete)
  • Article
  • Open Access
14 Citations
4,333 Views
20 Pages

Hot Deformation Behavior of Q345 Steel and Its Application in Rapid Shear Connection

  • Mengwei Wu,
  • Shuangjie Zhang,
  • Shibo Ma,
  • Huajun Yan and ,
  • Wei Wang and
  • Qiang Li
  • + 1 author+ 0 author

7 July 2019

The high-temperature deformation behavior of Q345 steel is detected by a Gleeble-3800 thermal simulator. The Arrhenius constitutive equation for high-temperature flow stress and the dynamic recrystallization model are constructed. With the secondary...

(This article belongs to the Special Issue Development of the Rolling Process in Metallic Materials)
  • Article
  • Open Access
1 Citations
1,069 Views
23 Pages

Degradation Susceptibility of Al-2.18Mg-1.92Li Alloy in Severe Environmental Conditions

  • Franjo Kozina,
  • Zdenka Zovko Brodarac,
  • Mitja Petrič and
  • Barbara Šetina Batič

24 April 2025

Due to the specific application of aluminum–magnesium–lithium (Al-Mg-Li) alloys in the transportation industry, it is necessary to consider the influence of microstructure development on material degradation under severe environmental con...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
10 Citations
4,233 Views
18 Pages

8 March 2021

We have demonstrated that our patented, crosslinked, sol–gel, epoxy–thiol silicates made from the combination of (a) tetraethoxysilane (TEOS, T), 3-glycidoxypropyltrimethoxysilane (GPTMS, G), and the (b) sulfur-containing 3-mercaptopropyltrimethoxysi...

  • Review
  • Open Access
81 Citations
13,408 Views
15 Pages

15 May 2020

High entropy alloys have attracted much interest over the last 16 years due to their promising an unusual properties in different fields that offer many new possible application. Additionally, additive manufacturing has drawn attention due to its ver...

  • Article
  • Open Access
22 Citations
3,999 Views
22 Pages

Effect of Calcium Carbide Residue on Strength Development along with Mechanisms of Cement-Stabilized Dredged Sludge

  • Xinyi Zhu,
  • Fujun Niu,
  • Lu Ren,
  • Chenglong Jiao and ,
  • Haiqiang Jiang and
  • Xiaoyue Yao
  • + 1 author+ 0 author

24 June 2022

The purpose of this research is to explore the feasibility of using calcium carbide residue (CCR), a by-product from acetylene gas production, as a solid alkaline activator on the strength development in CCR–Portland cement-stabilized dredged s...

(This article belongs to the Section Mechanics of Materials)
  • Review
  • Open Access
42 Citations
8,259 Views
23 Pages

11 August 2020

Titanium aluminides (TiAl) have the potential of substituting nickel-based superalloys (NBSAs) in the aerospace industries owing to their lightweight, good mechanical and oxidation properties. Functional simplicity, control of sintering parameters, e...

(This article belongs to the Special Issue News Trends in Powder Metallurgy: Microstructures, Properties, Durability)
  • Article
  • Open Access
41 Citations
4,351 Views
20 Pages

22 March 2023

Tef [Eragrostis tef (Zucc.) Trotter] flour is a gluten-free cereal rich in fiber, minerals, vitamins, and antioxidants, which offers a promising alternative for new food development. This study investigated the effect of microwave radiation (MW) on t...

(This article belongs to the Special Issue Legumes and Cereals: Physicochemical Characterization, Technical Innovation and Nutritional Challenges)
  • Article
  • Open Access
121 Citations
11,038 Views
20 Pages

Use of Slag/Sugar Cane Bagasse Ash (SCBA) Blends in the Production of Alkali-Activated Materials

  • Vinícius N. Castaldelli,
  • Jorge L. Akasaki,
  • José L.P. Melges,
  • Mauro M. Tashima and ,
  • Lourdes Soriano,
  • María V. Borrachero,
  • José Monzó and
  • Jordi Payá
  • + 3 authors+ 0 author

25 July 2013

Blast furnace slag (BFS)/sugar cane bagasse ash (SCBA) blends were assessed for the production of alkali-activated pastes and mortars. SCBA was collected from a lagoon in which wastes from a sugar cane industry were poured. After previous dry and gri...

(This article belongs to the Special Issue Geopolymers and Geopolymeric Materials)
  • Article
  • Open Access
15 Citations
5,761 Views
47 Pages

In Situ Synchrotron X-ray Diffraction and Microstructural Studies on Cold and Hot Stamping Combined with Quenching & Partitioning Processing for Development of Third-Generation Advanced High Strength Steels

  • Edwan Anderson Ariza Echeverri,
  • Arthur Seiji Nishikawa,
  • Mohammad Masoumi,
  • Henrique Boschetti Pereira and ,
  • Nelson Granda Marulanda,
  • Andrés Márquez Rossy,
  • Hélio Goldenstein and
  • André Paulo Tschiptschin
  • + 3 authors+ 0 author

18 January 2022

A novel combined process of Cold Stamping (CS) and Hot Stamping (HS) with Quenching and Partitioning (Q&P) treatment applied to advanced TRIP-assisted steel has been conducted by thermomechanical simulation to evaluate the influence of CS or HS i...

  • Article
  • Open Access
3 Citations
1,615 Views
19 Pages

Effect of Alkali Activation on Swelling Suppression and Microstructural Development in Geopolymer-Stabilized Bentonite

  • Tengshen Jing,
  • Shengyang Yuan,
  • Xianfeng Liu,
  • Yulin Liu and ,
  • Haibin Xu,
  • Weixing Zhou,
  • Pengjie Lin and
  • Guanlu Jiang
  • + 3 authors+ 0 author

28 February 2026

Geopolymers, a class of alkali-activated aluminosilicate binders, have emerged as a sustainable alternative for expansive soil stabilization. In this study, the swelling behavior of geopolymer-treated bentonite was systematically investigated using a...

(This article belongs to the Special Issue Advances in Polymers and Polymer Composites for Construction)
  • Article
  • Open Access
15 Citations
4,225 Views
24 Pages

The Relation between Concrete, Mortar and Paste Scale Early Age Properties

  • Martin Klun,
  • Vlatko Bosiljkov and
  • Violeta Bokan-Bosiljkov

23 March 2021

Microstructure development of concrete, mortar, and paste scale of cement-based material (CBM) during the early hydration stage has a significant impact on CBM’s physical, mechanical, and durability characteristics at the high maturity state. The res...

(This article belongs to the Special Issue Computational and Experimental Mechanics of Engineering Materials and Structures)
  • Article
  • Open Access
32 Citations
3,767 Views
11 Pages

Experimental Study on Durability Degradation of Geopolymer-Stabilized Soil under Sulfate Erosion

  • Guanci Wang,
  • Shanling Chen,
  • Minmin Xia,
  • Weilin Zhong and ,
  • Xuegang Han,
  • Biao Luo,
  • Mohanad Muayad Sabri Sabri and
  • Jiandong Huang
  • + 3 authors+ 0 author

22 July 2022

In this study, the potential application of slag-fly ash-based geopolymers as stabilizers for soft soil in sulfate erosion areas was investigated to promote environmental protection and waste residue recycling. The changes in the physical and mechani...

  • Article
  • Open Access
73 Citations
3,859 Views
24 Pages

19 November 2020

This study investigated the influence of the curing time on the fracture toughness of concrete produced with different content of low calcium fly ash (LCFA). During the study, the amounts of 20% and 30% of pozzolanic additive were used. In order to o...

(This article belongs to the Special Issue Fracture Toughness and Modelling of Concrete Composites and Other Brittle Materials)
  • Article
  • Open Access
17 Citations
11,627 Views
23 Pages

A Multi-Modal MRI Analysis of Cortical Structure in Relation to Gender Dysphoria, Sexual Orientation, and Age in Adolescents

  • Malvina N. Skorska,
  • Sofia Chavez,
  • Gabriel A. Devenyi,
  • Raihaan Patel and ,
  • Lindsey T. Thurston,
  • Meng-Chuan Lai,
  • Kenneth J. Zucker,
  • M. Mallar Chakravarty,
  • Nancy J. Lobaugh and
  • Doug P. VanderLaan
  • + 5 authors+ 0 author

18 January 2021

Gender dysphoria (GD) is characterized by distress due to an incongruence between experienced gender and sex assigned at birth. Sex-differentiated brain regions are hypothesized to reflect the experienced gender in GD and may play a role in sexual or...

(This article belongs to the Special Issue Neural Substrates of Gender Incongruence)
  • Article
  • Open Access
12 Citations
2,981 Views
17 Pages

21 June 2022

The corrosion and stress corrosion cracking (SCC) behaviors of 20#, X60, and X80 pipeline steels in a near-neutral pH environment were investigated by means of electrochemical measurement, immersion test, and interrupted slow strain rate tensile (SSR...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
17 Citations
4,797 Views
16 Pages

Tunable Head-Conducting Microwave-Absorbing Multifunctional Composites with Excellent Microwave Absorption, Thermal Conductivity and Mechanical Properties

  • Zhen Hong,
  • Xingxing Yu,
  • Yun Xing,
  • Mingshan Xue and ,
  • Yidan Luo,
  • Zuozhu Yin,
  • Chan Xie,
  • Yingbin Yang and
  • Zeming Ren
  • + 4 authors+ 0 author

Developing composite materials with both thermal conductivity and microwave absorption is an effective strategy to solve the problems of heat dissipation burden and microwave radiation interference caused by the development of miniaturization and hig...

(This article belongs to the Special Issue Multifunctional Composites, Volume II)
  • Feature Paper
  • Article
  • Open Access
18 Citations
4,696 Views
18 Pages

Development of Nanobainitic Microstructures in Carbo-Austempered Cast Steels: Heat Treatment, Microstructure and Properties

  • Oscar Ríos-Diez,
  • Ricardo Aristizábal-Sierra,
  • Claudia Serna-Giraldo,
  • Jose A. Jimenez and
  • Carlos Garcia-Mateo

14 May 2020

Carburizing implies the existence of a carbon gradient from the surface to the core of the steel, which in turn will affect both the critical temperature for austenite formation and the kinetics of the bainitic transformation during the austempering...

(This article belongs to the Special Issue 10th Anniversary of Metals: Metallurgy and Metal Technology)
  • Article
  • Open Access
8 Citations
2,636 Views
15 Pages

16 August 2022

Copper and zinc tailing powder (CZTP) is finely ground waste after copper minerals and zinc minerals have been extracted from ores during beneficiation. CZTP has certain potential cementitious properties and can be used in composite cementitious mate...

(This article belongs to the Special Issue Advances in Sustainable Construction and Building Materials)
  • Article
  • Open Access
134 Views
27 Pages

8 November 2026

This study evaluates oscillating fiber laser welding as an alternative to gas metal arc welding with an active shielding gas (GMAW/MAG) for manufacturing 4.25 mm thick SAE 1010 agricultural wheel rims. A systematic product development approach guided...

(This article belongs to the Special Issue Advanced Welding Technologies and Additive Manufacturing of Alloys and Metals (3rd Edition))
  • Article
  • Open Access
3 Citations
2,312 Views
14 Pages

Study on Microstructure of Cemented Organic Soil in Dianchi Lake, China

  • Siyang Huang,
  • Jing Cao,
  • Yunfei Song,
  • Zhigang Song and ,
  • Hong Liu and
  • Lin Tian
  • + 1 author+ 0 author

31 January 2023

The organic soil in the Dianchi Lake area contains much humic acid (HA), and the impact of HA on cemented soil has attracted much attention. In this study, test soil is prepared based on the actual HA content of the soil in Dianchi Lake, and cement i...

(This article belongs to the Section Civil Engineering)
  • Review
  • Open Access
66 Citations
19,568 Views
42 Pages

Recent Developments in Micro-Structured Fiber Optic Sensors

  • Yanping Xu,
  • Ping Lu,
  • Liang Chen and
  • Xiaoyi Bao

10 January 2017

Recent developments in fiber-optic sensing have involved booming research in the design and manufacturing of novel micro-structured optical fiber devices. From the conventional tapered fiber architectures to the novel micro-machined devices by advanc...

of 155