Skip to Content

4,789 Results Found

  • Proceeding Paper
  • Open Access
1,605 Views
5 Pages

2 December 2022

The automotive industry requires effective evaluation methods for the quality control of automobile parts and bearings. The ISO standard defines the calculation of roughness parameters from the material ratio curve (“MRC”) and material ra...

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
33 Citations
8,766 Views
17 Pages

Modeling of Material Removal Rate and Surface Roughness Generated during Electro-Discharge Machining

  • Amin Razeghiyadaki,
  • Carlo Molardi,
  • Didier Talamona and
  • Asma Perveen

This study reports on the numerical model development for the prediction of the material removal rate and surface roughness generated during electrical discharge machining (EDM). A simplified 2D numerical heat conduction equation along with additiona...

  • Article
  • Open Access
1,115 Views
11 Pages

Effect of Lapping Parameters on Material Removal Rate and Surface Roughness of GaN (0001) Plane

  • Hao Zhou,
  • Yongliang Shao,
  • Baoguo Zhang,
  • Haixiao Hu and ,
  • Yongzhong Wu and
  • Xiaopeng Hao
  • + 1 author+ 0 author

11 March 2026

As a critical pretreatment process for chemical and mechanical polishing (CMP), the lapping roughness of gallium nitride (GaN) crystals directly influences the outcome of subsequent polishing and the reliability of final devices. This study systemati...

(This article belongs to the Special Issue Advances in the Growth and Application of Nitride Crystals)
  • Article
  • Open Access
29 Citations
4,360 Views
18 Pages

11 January 2022

Material extrusion (ME), one of the most widely used additive manufacturing technique, has the advantages of freedom of design, wide range of raw materials, strong ability to manufacture complex products, etc. However, ME products have obvious surfac...

(This article belongs to the Topic Material and Process Innovations for 3D Printing Applications)
  • Article
  • Open Access
13 Citations
7,344 Views
15 Pages

7 August 2019

Honing processes provide a special cross-hatch pattern to the internal surface of cylinders that favors oil flow. However, along honing operation the abrasive grains wear out and lose their ability to cut material. The honing chips mixed with oil fil...

  • Article
  • Open Access
6 Citations
2,689 Views
13 Pages

13 March 2024

The article is focused on the study of the effect of laser light with three wavelengths used in a laser profilometer for the measurement of selected roughness parameters of the shiny surface of stainless steel A304 material. The measured results were...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
4 Citations
1,983 Views
12 Pages

21 December 2023

This paper presents the effect of burnishing on the surface hardness, selected surface roughness parameters and material ratio of tubes made of an EN AW-6060 aluminum alloy after welding. The prepared specimens were subjected to a 141-TIG welding pro...

  • Feature Paper
  • Article
  • Open Access
49 Citations
7,611 Views
12 Pages

An Experimental Investigation on the Material Removal Rate and Surface Roughness of a Hybrid Aluminum Metal Matrix Composite (Al6061/SiC/Gr)

  • Mandeep Singh,
  • Harish Kumar Garg,
  • Sthitapragyan Maharana,
  • Anchal Yadav and ,
  • Rasmeet Singh,
  • Pragyansu Maharana,
  • Tien V. T. Nguyen,
  • Sudesh Yadav and
  • M. K. Loganathan
  • + 4 authors+ 0 author

13 September 2021

The objective of this paper was to determine the optimum process parameters of an electric discharge machine while machining a new hybrid aluminum metal matrix composite. In this study, a new hybrid aluminum metal matrix composite was prepared, with...

(This article belongs to the Special Issue Advances in Lightweight Metal Matrix Composites)
  • Article
  • Open Access
585 Views
23 Pages

Scale-Dependent GD&T Conformity and Surface Roughness in PLA Parts Manufactured by Material Extrusion: A Metrological Assessment

  • Guillermo Guerrero-Vacas,
  • Gustavo Marcelo Flores,
  • Daniel Caballero,
  • Arturo Valle-Cobos and
  • Óscar Rodríguez-Alabanda

Dimensional accuracy and surface roughness in material extrusion (MEX) have been widely studied; however, the effect of part scale on the simultaneous fulfilment of geometrical tolerances and surface finish remains less clearly established. This stud...

  • Article
  • Open Access
3 Citations
2,634 Views
31 Pages

Proposes Geometric Accuracy and Surface Roughness Estimation of Anatomical Models of the Pelvic Area Manufactured Using a Material Extrusion Additive Technique

  • Paweł Turek,
  • Sławomir Snela,
  • Grzegorz Budzik,
  • Anna Bazan and ,
  • Jarosław Jabłoński,
  • Łukasz Przeszłowski,
  • Robert Wojnarowski,
  • Tomasz Dziubek and
  • Jana Petru
  • + 4 authors+ 0 author

27 December 2024

One of the main benefits of using 3D printing in orthopedics is the ability to create custom solutions tailored to a patient’s specific anatomical and functional needs. Conducting a reliable evaluation of the accuracy of the manufacture of anat...

(This article belongs to the Section Additive Manufacturing Technologies)
  • Article
  • Open Access
1 Citations
361 Views
16 Pages

9 September 2026

Construction material identification is important for automated construction monitoring, digital twin generation, and building information modelling. Terrestrial laser scanning (TLS) provides dense geometric information together with LiDAR intensity...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
3 Citations
1,587 Views
22 Pages

8 March 2026

Ultrasonic vibration-assisted grinding using cubic boron nitride (CBN) wheels has emerged as an effective approach for improving surface integrity and machining efficiency in hard-to-machine materials. However, achieving a desirable balance between s...

(This article belongs to the Special Issue Advanced Surface Topography and Engineering in Machine and Tool Applications)
  • Article
  • Open Access
5 Citations
1,269 Views
15 Pages

Effect of Different Surface Treatments and Toothbrushing Durations on Surface Roughness and Color Stability of CAD/CAM Interim Crown Material

  • Onur Şahin,
  • Ayşegül Köroğlu,
  • Doğu Ömür Dede,
  • Hüsniye Yıldırım and ,
  • Ünsun Yağcı and
  • Selda Gökçe Erdal
  • + 1 author+ 0 author

25 November 2025

The clinical performance of interim restorations, particularly in the anterior region, largely depends on surface roughness (Ra) and color stability. This study investigated the influence of different toothbrushing durations on the surface roughness...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
27 Citations
3,213 Views
22 Pages

Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate

  • Goran Jovicic,
  • Aleksandar Milosevic,
  • Zeljko Kanovic,
  • Mario Sokac and ,
  • Goran Simunovic,
  • Borislav Savkovic and
  • Djordje Vukelic
  • + 2 authors+ 0 author

2 June 2023

In this work, the dry turning of Inconel 601 alloy in a dry environment with PVD-coated cutting inserts was studied. Turning was performed at various cutting speeds, feeds, insert shapes, corner radii, rake angles, and approach angles. After machinin...

  • Article
  • Open Access
4 Citations
1,840 Views
17 Pages

This paper presents research findings on the turning of AZ31B magnesium alloy using ceramic-coated tungsten carbide tool inserts in a dry environment. Fifteen experiments were conducted according to the Box–Behnken design (BBD) for the straight...

  • Article
  • Open Access
1 Citations
247 Views
19 Pages

16 October 2026

Background/Objectives: This in vitro study compared color and roughness changes after simulated toothbrushing in milled GC Cerasmart 270 (CS) and 3D-printed Formlabs Permanent Crown (FL) following glazing or mechanical polishing. Methods: Eighty spec...

(This article belongs to the Special Issue Dental Restorative Materials: Current Development and Future Horizons)
  • Article
  • Open Access
59 Citations
6,567 Views
11 Pages

Predictability of Microbial Adhesion to Dental Materials by Roughness Parameters

  • Andrea Schubert,
  • Torsten Wassmann,
  • Mareike Holtappels,
  • Oliver Kurbad and ,
  • Sebastian Krohn and
  • Ralf Bürgers
  • + 1 author+ 0 author

Microbial adhesion to intraoral biomaterials is associated with surface roughness. For the prevention of oral pathologies, smooth surfaces with little biofilm formation are required. Ideally, appropriate roughness parameters make microbial adhesion p...

  • Article
  • Open Access
21 Citations
4,215 Views
21 Pages

Green-Building-Material Supplier Selection with a Rough-Set-Enhanced Quality Function Deployment

  • Zhiying Zhang,
  • Huchang Liao,
  • Jiaying Chang and
  • Abdullah Al-barakati

13 December 2019

Building material supplier evaluation and selection is a significant strategic-decision problem for reducing construction costs and ensuring the quality of a residential product. As people are increasingly concerning about the green level of a reside...

(This article belongs to the Special Issue Methodologies and Applications of Multiple Criteria Decision Making for Sustainable Development)
  • Article
  • Open Access
10 Citations
1,905 Views
14 Pages

The Influence of CLSM Magnification on the Measured Roughness of Differently Prepared Dental Materials

  • Martin Rosentritt,
  • Anne Schmutzler,
  • Sebastian Hahnel and
  • Laura Kurzendorfer-Brose

5 December 2024

This in vitro study investigated how varying magnifications (5×, 10×, 20×, and 50×) using a confocal laser scanning microscope (CLSM) influence the measured surface roughness parameters, Ra/Sa and Rz/Sz, of various materials w...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
20 Citations
5,848 Views
10 Pages

25 July 2019

Surface roughness plays an important role in estimating the shear strength of granular materials. A series of ring shear tests with different surface roughnesses (i.e., smooth and rough surfaces) were performed. A large-sized ring shear device, which...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
53 Citations
11,455 Views
14 Pages

28 November 2017

The human fingertip is an exquisitely powerful bio-tactile sensor in perceiving different materials based on various highly-sensitive mechanoreceptors distributed all over the skin. The tactile perception of surface roughness and material hardness ca...

(This article belongs to the Special Issue Tactile Sensors and Sensing)
  • Article
  • Open Access
5 Citations
4,973 Views
11 Pages

5 March 2020

In digital phosphor-based imaging modalities, one important intermediate stage is the optical coupling between the phosphor material and the optical sensor. The performance of the optical compatibility is affected by surface-roughness issues, for whi...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
128 Views
12 Pages

3 November 2026

Provisional restorative materials can be fabricated using conventional, subtractive, and additive manufacturing techniques; however, evidence regarding the combined effects of artificial aging and beverage exposure on the surface characteristics of t...

(This article belongs to the Special Issue Functional Polymeric Materials for Dental and Oral and Maxillofacial Surgery Applications (2nd Edition))
  • Review
  • Open Access
18 Citations
4,627 Views
10 Pages

Effect of Toothpaste on the Surface Roughness of the Resin-Contained CAD/CAM Dental Materials: A Systematic Review

  • Adolfo Di Fiore,
  • Edoardo Stellini,
  • Michele Basilicata,
  • Patrizio Bollero and
  • Carlo Monaco

31 January 2022

Background: The purpose of this review is to describe the possible effect of toothbrushing on surface roughness of resin-contained CAD/CAM materials. Methods: Systematic literature search for articles published in peer-reviewed journals between Janua...

(This article belongs to the Special Issue Current Trends and Future Directions in Prosthetic and Implant Dentistry in the Digital Era)
  • Article
  • Open Access
166 Views
16 Pages

15 October 2026

Background/Objectives: This in vitro study evaluated the effects of manufacturing technologies and finishing protocols on the color stability (ΔE00) and surface roughness (Ra) of five interim restorative materials after simulated toothbrushing....

(This article belongs to the Section Surface Coatings for Biomedicine and Bioengineering)
  • Systematic Review
  • Open Access
8 Citations
3,612 Views
17 Pages

The impact of acidic beverages on dental restorative materials, such as composites and glass ionomers, is critical in conservative dentistry. Exposure to an acidic environment can lead to the degradation of these materials, affecting their durability...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2025)
  • Technical Note
  • Open Access
133 Citations
8,602 Views
10 Pages

31 January 2018

In the study we experimentally examine the influence of elastic properties and surface morphology on the inter-particle friction of natural soil grains. The experiments are conducted with a custom-built micromechanical apparatus and the database is e...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
31 Citations
5,622 Views
13 Pages

Effect of Material Composition on Tunable Surface Roughness of Magnetoactive Elastomers

  • Gašper Glavan,
  • Wolfgang Kettl,
  • Alexander Brunhuber,
  • Mikhail Shamonin and
  • Irena Drevenšek-Olenik

1 April 2019

We investigated magnetic-field-induced modifications of the surface roughness of magnetoactive elastomers (MAEs) with four material compositions incorporating two concentrations of ferromagnetic microparticles (70 wt% and 80 wt%) and exhibiting two s...

(This article belongs to the Special Issue Selected Papers from ECIS 2018)
  • Article
  • Open Access
10 Citations
4,608 Views
15 Pages

31 May 2023

The article aims to assess the roughness of parting surfaces in the context of abrasive water jet technology for various materials. The evaluation is based on the feed speed of the cutting head, which is adjusted to achieve the desired final roughnes...

(This article belongs to the Special Issue Advanced Production, Processing and Characterization of Industrial Materials)
  • Article
  • Open Access
921 Views
13 Pages

Surface Roughness and Bacterial Adhesion of CAD/CAM and Conventional Provisional Restorative Materials

  • Hatice Defne Burduroglu,
  • Burcu Kanpalta,
  • Hilal Senturk,
  • Zeynep Hale Keles and
  • Soner Sismanoglu

12 August 2026

This study aimed to evaluate and compare the surface roughness (SR) and Streptococcus mutans adhesion of various provisional restorative materials fabricated using different manufacturing techniques, including traditional and computer-aided design/co...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
332 Views
14 Pages

2 October 2026

The optical stability and surface characteristics of provisional restorative materials are important during extended provisionalization. This in vitro study compared five commercially available provisional restorative materials exposed to five coffee...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
647 Views
15 Pages

This in vitro study evaluated the effects of simulated gastric acid exposure on surface roughness, color change, translucency, and mass change in four monolithic CAD/CAM restorative materials with different microstructural compositions. Rectangular s...

  • Article
  • Open Access
10 Citations
2,505 Views
17 Pages

4 July 2023

From the point of view of production, it is of fundamental importance to know the cutting parameters at which the new surface of the component was created because only in this way is it possible to understand the nature and properties of the created...

(This article belongs to the Special Issue Technologies, Materials and Digital Management Solutions for Automotive Industry)
  • Article
  • Open Access
18 Citations
3,972 Views
11 Pages

Influences of Toothbrushing and Different Toothpastes on the Surface Roughness and Color Stability of Interim Prosthodontic Materials

  • Ayşegül Köroğlu,
  • Onur Şahin,
  • Ahmet Serkan Küçükekenci,
  • Doğu Ömür Dede and ,
  • Hüsniye Yıldırım and
  • Burak Yilmaz
  • + 1 author+ 0 author

24 August 2022

The surface properties and color stability of interim crown materials may vary depending on the toothbrushing procedure. This study aimed to investigate the effects of toothbrushing and different toothpastes on the surface roughness (Ra) and color st...

(This article belongs to the Special Issue Materials for Prosthodontics, Restorative Dentistry and Digital Dentistry)
  • Article
  • Open Access
25 Citations
4,963 Views
13 Pages

18 August 2022

Higher contact resistance not only increases power consumption and temperature rise but also causes undesirable interconnectivity between electrode materials, which further influences the electrical lifespan and reliability of switching devices. Howe...

  • Article
  • Open Access
13 Citations
2,978 Views
19 Pages

The Surface Roughness of Contemporary Indirect CAD/CAM Restorative Materials That Are Glazed and Chair-Side-Finished/Polished

  • Ragad Albani,
  • Syed Rashid Habib,
  • Abdulaziz AlQahtani,
  • Abdulaziz A. AlHelal and ,
  • Mohammed Alrabiah and
  • Saqib Anwar
  • + 1 author+ 0 author

21 February 2024

The surface roughness (Ra) of indirect computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated dental restorations is crucial for their long-term durability. This study intended to evaluate the Ra of five different types of contempora...

(This article belongs to the Special Issue Characteristics of Dental Ceramics)
  • Article
  • Open Access
21 Citations
3,152 Views
17 Pages

30 September 2021

It is difficult to accurately predict the surface roughness of belt grinding with superalloy materials due to the uneven material distribution and complex material processing. In this paper, a radial basis neural network is proposed to predict surfac...

(This article belongs to the Special Issue Surface Processing Technology for High-Temperature Resistant Materials)
  • Article
  • Open Access
14 Citations
3,640 Views
15 Pages

9 January 2022

This paper describes a surface-roughness study performed on samples manufactured additively using the Multi Jet Fusion (MJF) technology. The samples were divided into three groups based on the material used in the process: polypropylene (PP), thermop...

(This article belongs to the Special Issue Advances and Trends in Non-conventional, Abrasive and Precision Machining 2021)
  • Article
  • Open Access
2 Citations
2,530 Views
10 Pages

Surface Roughness-Governed Shape Stability of the Coal Fly Ash-Based Phase Change Material: Molten Salt Processing and Thermal Properties

  • Denian Li,
  • Jizhang Yang,
  • Menglei Chang,
  • Yue Zhao and ,
  • Haoran Yuan and
  • Yong Chen
  • + 1 author+ 0 author

5 March 2021

Coal fly ash (FA) valorization is of great significance and sustainable interests to addressing the current environmental challenges faced by coal power industry. Herein, this work attempted a novel molten salt Na2CO3 treatment for processing FA into...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
5 Citations
4,230 Views
13 Pages

20 May 2025

Objectives: To examine the effects of surface treatments on the color stability, surface roughness, surface gloss, and wettability of monolithic polychromatic material jetting (MJT) 3D-printed denture material. Material and Methods: Twenty-one color...

(This article belongs to the Special Issue 3D Printing and Restorative Dentistry)
  • Article
  • Open Access
2 Citations
2,281 Views
14 Pages

On the Interplay Between Roughness and Elastic Modulus at the Nanoscale: A Methodology Study with Bone as Model Material

  • Alessandro Gambardella,
  • Gregorio Marchiori,
  • Melania Maglio,
  • Marco Boi and ,
  • Matteo Montesissa,
  • Jessika Bertacchini,
  • Stefano Biressi,
  • Nicola Baldini,
  • Gianluca Giavaresi and
  • Marco Bontempi
  • + 5 authors+ 0 author

Atomic force microscopy (AFM)-based nanoindentation enables investigation of the mechanical response of biological materials at a subcellular scale. However, quantitative estimates of mechanical parameters such as the elastic modulus (E) remain unrel...

(This article belongs to the Section Biomaterials and Devices for Healthcare Applications)
  • Article
  • Open Access
1 Citations
1,021 Views
19 Pages

20 April 2026

Surface quality of machined wood-based panels plays a key role in subsequent processing and product performance; however, its formation during CNC edge milling remains insufficiently understood, particularly for materials with different structural ch...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
36 Citations
5,190 Views
16 Pages

23 January 2023

Its unexcelled mechanical and physical properties, in addition to its biocompatibility, have made stainless steel 304 a prime candidate for a wide range of applications. Among different manufacturing techniques, electrical discharge machining (EDM) h...

(This article belongs to the Special Issue Nonconventional Technology in Materials Processing-Volume 2)
  • Article
  • Open Access
62 Citations
6,370 Views
14 Pages

Impact of Implant Surface Material and Microscale Roughness on the Initial Attachment and Proliferation of Primary Human Gingival Fibroblasts

  • Marco Aoqi Rausch,
  • Hassan Shokoohi-Tabrizi,
  • Christian Wehner,
  • Benjamin E. Pippenger and ,
  • Raphael S. Wagner,
  • Christian Ulm,
  • Andreas Moritz,
  • Jiang Chen and
  • Oleh Andrukhov
  • + 4 authors+ 0 author

22 April 2021

Due to the rising demand for zirconia (Zr) based implant systems, it is important to understand the impact of Zr and titanium (Ti) implants and particularly their topography on soft tissue healing. As human gingival fibroblasts (hGFs) are the predomi...

(This article belongs to the Special Issue New Trends in Bioengineering in Osseointegration and Dental Implants)
  • Article
  • Open Access
15 Citations
4,504 Views
19 Pages

Examining the electrical discharge machining (EDM) process is challenging in manufacturing technology due to the complexity of the physical events that take place in the gaps between electrodes. In this study, we examined the EDM process in detail an...

(This article belongs to the Special Issue Mechanics Analysis and Predictive Modeling of Engineering Materials Involved in the Manufacturing of Parts and Components)
  • Article
  • Open Access
39 Citations
5,996 Views
28 Pages

1 September 2023

In recent years, fused deposition modeling (FDM) based on material extrusion additive manufacturing technology has become widely accepted as a cost-effective method for fabricating engineering components with net-shapes. However, the limited explorat...

(This article belongs to the Special Issue Mechanical and Physical Properties of 3D Printed Polymer Materials)
  • Article
  • Open Access
20 Citations
5,253 Views
12 Pages

19 August 2024

The object of the study was to assess the effect of different finishing and polishing systems on the roughness and gloss of a 3D-printed permanent restorative material. One 3D printable Permanent material was selected for the study. Squared-shaped sp...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
4 Citations
1,303 Views
24 Pages

20 November 2025

This study investigates the mechanical behavior of glass bead specimens with different surface roughness under triaxial testing using the Discrete Element Method (DEM). The microscopic parameters for the DEM simulation were calibrated by referencing...

  • Article
  • Open Access
25 Citations
3,917 Views
12 Pages

Relationship between the Surface Roughness of Material and Bone Cement: An Increased “Polished” Stem May Result in the Excessive Taper-Slip

  • Masayuki Hirata,
  • Kenichi Oe,
  • Ayumi Kaneuji,
  • Ryusuke Uozu and ,
  • Kazuhiro Shintani and
  • Takanori Saito
  • + 1 author+ 0 author

2 July 2021

Although some reports suggest that taper-slip cemented stems may be associated with a higher periprosthetic femoral fractures rate than composite-beam cemented stems, few studies have focused on the biomaterial effect of the polished material on the...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
23 Citations
5,356 Views
11 Pages

27 January 2023

This study aims to evaluate the physical properties of Cention N and various glass-ionomer-based materials in vitro. The groups were obtained as follows: Group 1 (LC-Cent): light-cured Cention N; Group 2 (SC-Cent): self-cured Cention N; Group 3 (COMP...

(This article belongs to the Special Issue New Horizons in Nanofillers Based Polymer Composites II)

of 96