- Article
A temperature dependent entropic force acting between the straight direct current I and the linear system (string with length of L) of N elementary non-interacting magnets/spins
A temperature dependent entropic force acting between the straight direct current I and the linear system (string with length of L) of N elementary non-interacting magnets/spins
The modular magnetic suspension platform depends on multi degree of freedom of Lorentz force actuators for large bearing capacity, high precision positioning and structure miniaturization. To achieve the integration of vertical driving force and hori...
The 6-DOF vibration isolation platform (VIP) is used to isolate vibration in the processing and manufacturing of semiconductor chips, especially electric vehicle chips. The 6-DOF VIP has the characteristics of high position accuracy, fast dynamic res...
There have been increasing efforts to compute magnetic exchange coupling constants for transition metal complexes and magnetic insulators using the magnetic force theorem and Green’s function-based linear response methods. These were originally...
The anchor cables of slopes are affected by long-term environmental corrosion, geotechnical creep, and adverse weather, resulting in gradual loss of tensile force, which can lead to structural failure and subsequent safety accidents. The authors of t...
We present the results of magnetic force microscopy investigations of domain structures in multilayer [Co (0.5 nm)/Pt (1 nm)]5 thin film structures (denoted hereafter as Co/Pt) modified by additional Co capping layers and by ion irradiation. It is de...
To replace the worn-out cutter of tunnel boring machines timely, it is crucial to inspect the cutter’s wear. In this work, a novel detection method based on magnetic force is proposed to overcome the drawback of nonlinearity in current detectin...
This paper investigates the forces generated by axially magnetized ring permanent magnets with trapezoidal cross-sections when placed near a soft magnetic cylinder. Utilizing the Hybrid Boundary Element Method (HBEM), this study models interactions i...
This paper presents an air-gap magnetic field manipulation by optimized coil currents for a magnetic force enhancement in electromechanical devices. The external coil is designed near the device air-gap for manipulating the magnetic field distributio...
Encapsulated magnetic nanoparticles are of increasing interest for biomedical applications. However, up to now, it is still not possible to characterize their localized magnetic properties within the capsules. Magnetic Force Microscopy (MFM) has prov...
Bulk multiferroic ceramics have been extensively studied due to their great potential for magneto-electric coupling applications such as low-power and multifunctional nano-electronic devices. In most of these studies the macroscopic magnetic performa...
Mobile robots that are required to climb inclined ferromagnetic surfaces typically employ magnetic wheels. In order to design magnetic wheels and to properly size the permanent magnet as magnetizing source without the need for finite element analyses...
When a magnetic bearing is used in the design of a high-speed motor, no friction and wear occur because of the principle of magnetic levitation; however, the size of the entire system increases. An integrated magnetic bearing motor is a motor with a...
Magnetism plays a pivotal role in many biological systems. However, the intensity of the magnetic forces exerted between magnetic bodies is usually low, which demands the development of ultra-sensitivity tools for proper sensing. In this framework, m...
Magnetic fields may relax dissipatively to the minimum energy force-free condition whenever they are not constantly created or distorted. We review the axially symmetric solutions for force-free magnetic fields, especially for the non-linear field. A...
Recent progress in the development of high-frequency (HF) magnetic materials and devices requires the HF imaging of magnetic field and magnetic field response with high spatial resolution. In this work, we proposed HF Alternating Magnetic Force Micro...
We demonstrated numerically the skyrmion formation in ultrathin nanodisks using a magnetic force microscopy tip. We found that the local magnetic field generated by the magnetic tip significantly affects the magnetization state of the nanodisks and l...
Microscopic characterization of magnetic nanomaterials by magnetic probe interacting with ferromagnetic nano-domains is proposed according to finite-element magnetostatic field simulations. Magnetic forces detected by microscopic probe are systematic...
This paper presents a real-time magnetic adhesion force estimation framework for wall-climbing robots equipped with Halbach permanent magnet arrays (PMAs) and air-gap–adjustable mechanisms. Accurately computing the magnetic adhesion force betwe...
Biomolecules participate in various physiological and pathological processes through intermolecular interactions generally driven by non-covalent forces. In the present review, the force-induced remnant magnetization spectroscopy (FIRMS) is described...
This study presents preliminary computational and experimental findings on two alternative permanent magnet configurations helpful for magnetic drug administration in vivo. A numerical simulation and a direct experimental measurement of the magnetic...
The importance of magnetic micro- and nanoparticles for applications in biomedical technology is widely recognised. Many of these applications, including tissue engineering, cell sorting, biosensors, drug delivery, and lab-on-chip devices, require re...
In order to solve the electromagnetic force optimization problem of a high-power-density ironless Halbach-type permanent magnet synchronous linear motor, this paper adopts an electromagnetic force optimization method based on magnetic field analysis,...
Cellular spheroids were studied to determine their use as “bioinks” in the biofabrication of tissue engineered constructs. Specifically, magnetic forces were used to mediate the cyclic longitudinal stretching of tissues composed of Janus magnetic cel...
Magnetic Force Microscopy (MFM) is among the best techniques for examining and assessing local magnetic characteristics in surface structures at scales and sizes. It may be viewed as a unique way to operate atomic force microscopy with a ferromagneti...
This paper presents a proof-of-concept prototype of a micro force sensing mobile microrobot. The design consists of a planar, elastic mechanism serving as computer vision-based force sensor module, while the microrobot body is made from a magnetic la...
The general method to suppress the axial force of the permanent magnet synchronous motor (PMSM) direct-drive turbine is to increase the number of balance devices, such as balance disks and special bearings, to counteract its influence, but this also...
Magnetically driven microrobots operating in intestinal environments face two major challenges: difficulty in traversing low-height confined spaces and limited local visibility caused by mucosal obstruction. To address these issues, this study propos...
The development of magnetoactive microsystems for targeted drug delivery, magnetic biodetection, and replacement therapy is an important task of present day biomedical research. In this work, we experimentally studied the mechanical force acting in c...
Magnetic force microscopy (MFM) enables to characterize magnetic properties with submicron (nanoscale) resolution and without much demand on sample surface preparation. MFM can operate in a wide range of temperatures and environmental conditions, tha...
Bearingless permanent magnet synchronous motors (BPMSMs), with all advantages of permanent magnet motors (PMSMs) and magnetic bearings, have become an important research direction in the bearingless motor field. To realize a stable suspension for the...
Magnetic Force Microscopy (MFM) is the principal characterization technique for the study of low-dimensional magnetic materials. Nonetheless, during years, the samples under study was limited to samples in the field of data storage, such as longitudi...
In this paper, finite element analysis demonstrates the difference between dual-permanent-magnet-excited machines (DPMM) and surface-mounted permanent magnet machines (SPM) in terms of tangential force at the same air gap, diameter, stacking length,...
This paper presents an analytical model for predicting electromagnetic forces in an 8-pole/12-slot surface-mounted permanent magnet synchronous machine considering static rotor eccentricity and magnetic saturation. The eccentric air gap is represente...
An electropermanent magnet (EM) can be fixed or rotated without applying the additional power of a wobble motor. This consists of a neodymium magnet and semi-hard magnet. A model to design a wobble motor for a wobble gripper without finite element an...
The magnetic circuit of existing linear force motors does not consider the issue of energy utilization of permanent magnets, and the structure is complicated. To achieve high energy utilization and simplify the structure, this paper presents a novel...
13 December 2024
In granular media for perpendicular magnetic recording, zigzag-shaped magnetic domain boundaries form between magnetic grains isolated by a non-magnetic grain boundary phase. They are the main source of jitter noise caused by the position fluctuation...
A voice coil motor is a simple and linear electromagnetic actuator. Since it has a non-contact force and very low stiffness, it is widely used for precision positioning devices including magnetic levitation systems. During magnetic levitation, high f...
Changes in bacterial physiology caused by the combined action of the magnetic force and microgravity were studied in Escherichia coli grown using a specially developed device aboard the International Space Station. The morphology and metabolism of E....
The study of patterned magnetic elements that can sustain more than one bit of the information is an important research line for developing new routes in magnetic storage and magnetic logic devices. Previous Monte Carlo studies of T-shaped magnetic n...
Aiming at the influence of the magnetic flux density uniformity error (MFDUE) of the Lorentz force magnetic bearing (LFMB) on the sensitivity accuracy of magnetically suspended control and sensing gyroscopes (MSCSGs) on the angular rate of a spacecra...
The variable-pitch connecting rod of a helicopter bears axial tensile and compressive loads during operation. The traditional load monitoring method using strain gauge is easily affected by external conditions. Therefore, a giant magnetostrictive (GM...
Magnetic structure of functional magnetic dielectrics is traditionally of high interest. Here, we use the magnetic force microscopy (MFM) and nonlinear-optical probe of second harmonic generation for studies of surface domain structure of monocrystal...
In recent years, micromanipulators have provided the ability to interact with micro-objects in industrial and biomedical fields. However, traditional manipulators still encounter challenges in gaining the force feedback at the micro-scale. In this pa...
This paper presents a multi-axis low-cost soft magnetic tactile sensor with a high force range for force feedback in robotic surgical systems. The proposed sensor is designed to fully decouple the output response for normal, shear and angular forces....
In this paper, we demonstrate a miniature magnetic-force-based, three-axis, AC magnetic sensor with piezoelectric/vibrational energy-harvesting functions. For magnetic sensing, the sensor employs a magnetic–mechanical–piezoelectric configuration (whi...
To address the micro-vibration isolation requirements of precision payloads in spacecraft, a Lorentz force-based magnetic levitation series vibration isolation platform is proposed. The Lorentz force actuator, overall coupling characteristics, and lo...
A magnetically-guided capsule endoscope, embedding flexible force sensors, is designed to measure the capsule-tissue interaction force. The flexible force sensor is composed of eight force-sensitive elements surrounding the internal permanent magnet...
The magnetic susceptibilities of various electrically insulating ordinary fluids depend on their local states, such as their density and temperature. When such fluids, which can be characterized as either paramagnetic or diamagnetic and occur commonl...
Linear flux-switching permanent magnetic (LFSPM) machines are good choices for long stroke applications. These machines deliver high thrust force density in addition to the machine structure where permanent magnetics (PMs) and windings are all on the...
of 63