The development of ISE-based sensors for the analysis of nitrates in liquid phase is described in this work. Focusing on the tetradodecylammonium nitrate (TDDAN) ion exchanger as well as on fluoropolysiloxane (FPSX) polymer-based layers, electrodepos...
Over the past years, to achieve better sensing performance, hafnium dioxide (HfO2) has been studied as an ion-sensitive layer. In this work, thin layers of hafnium dioxide (HfO2) were used as pH-sensitive membranes and were deposited by atomic layer...
In this study, we propose tunable pH sensors based on the electric-double-layer transistor (EDLT) with time-dependent sensitivity characteristics. The EDLT is able to modulate the drain current by using the mobile ions inside the electrolytic gate di...
Focusing on the ChemFET (chemical field-effect transistor) technology, the development of a multi-microsensor platform for soil analysis is described in this work. Thus, different FET-based microdevices (i.e., pH-ChemFET pNH4-ISFET and pNO3-ISFET sen...
A complex deposition procedure of the hydrogel layer of modified poly(2-hydroxyethyl methacrylate) (polyHEMA) covalently linked to the silicon nitride surface and covering only the gate area of the ISFET, was optimized for photolithographic technolog...
The development of ion-sensitive field-effect transistor (ISFET) sensors based on silicon nanowires (SiNW) has recently seen significant progress, due to their many advantages such as compact size, low cost, robustness and real-time portability. Howe...
pH sensors based on a nanostructured ion-sensitive field-effect transistor have characteristics such as fast response, high sensitivity and miniaturization, and they have been widely used in biomedicine, food detection and disease monitoring. However...
The scientific community has been interested in lophine’s versatility and usage in various applications. Research has shown that humic acid is a material that exhibits interference with lophine. Humic molecules associate with each other in supr...
Graphene-based ion-sensitive field-effect transistors can operate as biosensors by utilizing the formation of an electric double layer at the interface between the electrolyte and the graphene channel, enabling high sensitivity, scalability, and cost...
The use of deoxyribonucleic acid (DNA) hybridization to detect disease-related gene expression is a valuable diagnostic tool. An ion-sensitive field-effect transistor (ISFET) with a graphene layer has been utilized for detecting DNA hybridization. Si...
An H+-ion sensor based on a gated lateral bipolar junction transistor (BJT) pair that can operate without the classical reference electrode is proposed. The device is a special type of ion-sensitive field-effect transistor (ISFET). Classical ISFETs h...
More and more chemosensors and biosensors are turning to electronic transistors, as they are ideal transducers, precise in current response, miniaturized in size and capable of providing sub-picomolar detection limits. Among these devices, ISFET tran...
A stable reference electrode (RE) plays a crucial role in the performance of an ion-sensitive field-effect transistor (ISFET) for bio/chemical sensing applications. There is a strong demand for the miniaturization of the RE for integrated sensor syst...
This study introduces a cutting-edge, aptamer-based, planar electric, double-layer field-effect transistor (FET) system that offers both high sensitivity and specificity for the detection of troponin I (TnI). The proposed sensing platform leverages t...
The detection and monitoring of ions are essential for a broad range of applications, including industrial process control and biomedical diagnostics. Traditional ion-sensitive field-effect transistors require bulky and expensive reference electrodes...
The detection of Pb(II) ions in a river using the surface plasmon resonance (SPR)-based silver (Ag) thin film technique was successfully developed. Chitosan–graphene oxide (CS-GO) was coated on top of the Ag thin film surface and acted as the a...
In this paper, a method is described to perform ion concentration measurements on both sides of an inserted contact lens, without physical contact with the eye or the contact lens. The outer surface of an eye is covered with a tear film that has mult...
The widespread application of calcium carbonate is determined by its high availability in nature and simplicity of synthesis in laboratory conditions. Moreover, calcium carbonate possesses highly attractive physicochemical properties that make it sui...
A detailed review of recent developments of layer-by-layer (LbL) deposition as a promising approach to reduce flammability of the most widely used fibers (cotton, polyester, polyamide and their blends) is presented. LbL deposition is an emerging gree...
As promising biochemical sensors, ion-sensitive field-effect transistors (ISFETs) are used widely in the growing field of biochemical sensing applications. Recently, a new type of field-effect transistor gated by ionic electrolytes has attracted inte...
The efficient mechanism of light capture by photosynthetic proteins allows for energy transfer and conversion to electrochemical energy at very low light intensities. In this work, reaction center (RC) proteins, or a core complex consisting of the RC...
This paper presents research on the properties of solid contact electrodes with an intermediate layer of multi-walled carbon nanotubes. They were used as an intermediate layer (Solid Contact SC-ISE electrodes) and as a dispersed material in a polymer...
In this research, the fabrication process of MISFET (Metal–Insulator–Semiconductor Field-Effect Transistor) structures with a SiO2/HfOxNy stack as a gate dielectric was developed, providing a viable device platform for future ion-sensitiv...
This paper presents a new field-effect sensor called open-gate junction gate field-effect transistor (OG-JFET) for biosensing applications. The OG-JFET consists of a p-type channel on top of an n-type layer in which the p-type serves as the sensing c...
A reference electrode is necessary for the working of ion-sensitive field-effect transistor (ISFET)-type sensors in electrolyte solutions. The Ag/AgCl electrode is normally used as a reference electrode. However, the Ag/AgCl reference electrode limit...
The widespread use of silver raises concerns about environmental and health risks, necessitating highly sensitive detection methods for trace silver ions (Ag+). Surface plasmon resonance (SPR) sensors offer benefits like label-free detection and rapi...
Convenient and highly sensitive detection of oxalate ions in body fluids is of crucial significance for disease prevention, diagnosis, and monitoring of treatment effectiveness. Establishing a simple solid-state electrochemiluminescence (ECL) sensing...
TaS2 as transition metal dichalcogenide (TMD) two-dimensional (2D) material has sufficient unstructured bonds and large inter-layer spacing, which highly supports transporting and absorbing mercury ions. The structural characterizations and simulatio...
This paper proposes a reflective fiber mercury ion sensor based on the surface plasmon resonance (SPR) principle and chitosan (CS)/polyacrylic acid (PAA) multilayer sensitive film. By optimizing the coating parameters of the gold film, the refractive...
A new universal construction of intermediate-layer-free solid-contact ion-selective electrodes using a novel inner electrode, namely microelectrodes array composed of a large number of individual microelectrodes, was developed. This approach eliminat...
Ni-rich layered oxides, i.e., LiNi0.6Mn0.2Co0.2O2 (NMC622) and LiNiO2 (LNO), were prepared using the two-step calcination procedure. The samples obtained at different calcination temperatures (750–950 °C for the NMC622 and 650–850 &de...
We present a colorimetric sensor based on functionalized silver nanoparticles for the detection of metal ions in aqueous solutions. The interaction between the target metal ion and the functionalizing agent triggers the aggregation of these nanoparti...
This study reports the development of a highly sensitive electrochemical sensor for phosphate ion detection, utilizing silicon nanowires (SiNWs) as the transducing elements and a novel copper (II) phthalocyanine-acrylate polymer adduct (Cu (II) Pc-PA...
We report on a method for selective optical sensing and imaging of potassium ions using a sandwich assembly composed of layers of photonic crystals and an ion-selective membrane. This represents a new scheme for sensing ions in that an ionic strength...
High sensitive flexible and wearable devices which can detect delicate touches have attracted considerable attentions from researchers for various promising applications. This research was aimed at enhancing the sensitivity of a MWCNT/PDMS piezoresis...
Use of the nanocomposite of chloride-doped polyaniline nanofibers and multiwalled carbon nanotubes (PANINFs-Cl:MWCNTs) for construction of ion-selective electrodes with solid-contact sensitive to chloride ions has been described. Many types of electr...
Copper ion is closely associated with the ecosystem and human health, and even a little excessive dose in drinking water may result in a range of health problems. However, it remains challenging to produce a highly sensitive, reliable, cost-effective...
Herein, we present the syntheses of a novel coordination polymer (CP) based on the perylene-3,4,9,10-tetracarboxylate (pery) linkers and sodium metal ions. We have chosen sodium metal center with the aim of surmising the effect that the modification...
Two novel multi-layer three-dimensional polymers (Polymer 1 and Polymer 2) were designed and synthesized via a multi-step coupling strategy. Their photophysical properties, aggregation-induced emission (AIE) behaviors, and metal ion sensing capabilit...
Solid-contact ion-selective electrodes (SC-ISEs) are typically constructed using ion-selective membrane (ISM)-based configurations. However, such structures often suffer from water-layer formation and the weak mechanical stability of the ISM. Herein,...
This work presents a flexible miniaturized ion-selective sensor consisting of a solid-contact reference electrode (RE) and ion-selective electrodes (ISE) fabricated on the same foil. The flexible ion sensor was based on AgCl electrodes screen printed...
Ion-selective electrodes are at the forefront of research nowadays, with applications in healthcare, agriculture and water quality analysis among others. Despite multiple attempts of miniaturization of these polyvinyl chloride (PVC) gel-based ion sen...
Ion implantation technology is reviewed mainly from the viewpoint of image sensors, which play a significant role in implantation technology development. Image sensors are so sensitive to metal contamination that they can detect even one metal atom p...
In the present work a highly sensitive ion-selective microelectrode for the detection of amphetamine is presented. For this purpose, a novel ion-par complex based on the metallocarborane, cobalt bis(dicarbollide) anion ([3,3′-Co(1,2-C2B9H11)2]−) coup...
Separative extended gate field effect transistor (SEGFET) type devices have been used as an ion sensor or biosensor as an alternative to traditional ion sensitive field effect transistors (ISFETs) due to their robustness, ease of fabrication, low cos...
A high Nb-containing TiAl alloy Ti-45Al-8.5Nb-(W, B, Y) with nearly lamellar microstructure has been irradiated by 200 kV He2+ to a fluence of 1 × 1021 ions/m2 with a dose of about 1.1 dpa at 298 K and 773 K in this work. It is found that an am...
In this study, we demonstrate that a highly pH-sensitive substrate could be fabricated by controlling the type and defect density of graphene derivatives. Nanomaterials from single-layer graphene resembling a defect-free structure to few-layer graphe...
This work presents new material for solid-contact layers—hydrous iridium dioxide IrO2·2H2O, characterized by high electrical capacitance value, evaluated using chronopotentiometry (1.22 mF) and electrochemical impedance spectroscopy (1.57 mF). The re...
Aquatic heavy metal pollution poses substantial risks to ecological systems and human health, attributable to the toxic properties and bioaccumulative behaviors of metallic ions, including Hg[II], Zn[II], and ion mixtures. A novel SPR sensing chip ba...
For silicon carbide (SiC) processed by ion-implantation, dedicated test structure fabrication or destructive sample processing on test wafers are usually required to obtain depth profiles of electrical characteristics such as carrier concentration. I...
of 7