- Article
We report synthesis, crystal structure, and physical properties of Sr
We report synthesis, crystal structure, and physical properties of Sr
Efficient charge transfer between organic semiconductors and electrode materials at electrode interfaces is essential for achieving high-performance organic optoelectronic devices. For efficient charge injection and extraction at the electrode interf...
Photocatalytic H2O2 synthesis emerges as a promising green substitute for the energy-intensive anthraquinone process, yet its efficiency is limited by rapid charge recombination and limited surface active sites in bulk polymeric semiconductors. Herei...
Perovskite solar cell efficiency is not only related with material properties, but also affected by the interface engineering that used in perovskite solar cells. The perovskite film/electrode interface properties play important roles in charge carri...
A carbonized interlayer effectively helps to improve the electrochemical performance of lithium–sulfur (Li–S) batteries. In this study, a simple and inexpensive carbon intermediate layer was fabricated using a traditional Korean paper cal...
Contact resistance between the cathode active material (CAM) and the Al current collector can be reduced by applying carbon coatings to the Al current collector surface. However, this process requires an additional step of carbon layer coating on the...
Electrochemical lithium-sulfur batteries engage the attention of researchers due to their high-capacity sulfur cathodes, which meet the increasing energy-density needs of next-generation energy-storage systems. We present here the design, modificatio...
A variety of hetero-junctions can be constructed to form the basic structural units in the different optoelectronic devices, such as the photo-detectors, solar cells, sensors and light-emitting diodes. In our research, the large-area high-quality MoS...
Understanding the non-equilibrium dynamical processes in two-dimensional (2D) transition metal dichalcogenide (TMDC) heterostructures is essential for elucidating their photoelectric behaviors. In this work, we investigate the electronic structure, e...
Two-dimensional metal chalcogenides (2D-MCs) with complex interactions are usually rich in phase transition behavior, such as superconductivity, charge density wave (CDW), and magnetic transitions, which hold great promise for the exploration of exci...
The electronic states of the twist bilayer graphene (TBG) moiré superlattice are usually regulated by the rotation angle, applied electric field, applied magnetic field, carrier concentration and applied stress, and thus exhibit novel physical...
In this study, the corrosion performance and near-surface residual stress state of laser-welded Ti6Al4V/AA7075 dissimilar joints produced with a silver (Ag) interlayer are investigated. Potentiodynamic polarization, cyclic polarization, and electroch...
Skyrmions are promising for the next generation of spintronic devices, which involves the production and transfer of skyrmions. The creation of skyrmions can be realized by a magnetic field, electric field, or electric current while the controllable...
Polyampholytes combine cationic and anionic groups in one macromolecular platform and are emerging as versatile components for energy storage and conversion. This review synthesizes how their charge balance, hydration, and architecture can be enginee...
Van der Waals (vdW) heterostructures based on two-dimensional (2D) transition metal dichalcogenides (TMDCs), particularly WS2/MoS2 heterostructures with type-II band alignments, are considered as ideal candidates for future functional optoelectronic...
The ability to precisely control the electronic bandgap is crucial for tailoring two-dimensional (2D) materials for optoelectronic applications. In this work, we systematically investigate the electronic structure of 2D tin monoxide (SnO) across vari...
Two-dimensional (2D) hybrid organic–inorganic perovskites (HOIPs) have attracted considerable attention in optoelectronic applications, owing to their remarkable characteristics. Nevertheless, the application of 2D HOIPs encounters inherent cha...
Natural photosynthetic systems contain several dyes such as carotenoids or chlorophylls which are adequately arranged to produce efficient photoinduced charge separation and electron transfer. Several research groups have attempted integrating these...
Aqueous zinc-ion batteries offer a safe and economical platform for large-scale energy storage, yet vanadium oxide cathodes remain hindered by sluggish Zn2+ migration, poor electronic conductivity, and structural degradation during cycling. Herein, a...
With the advancement of battery technology and the promotion of the “dual carbon” policy, electric vehicles (EVs) have been widely used in industrial, commercial, and civil fields, and the charging infrastructure of highway service areas...
During Bayer alumina production with high-sulfur bauxite, the sulfide ions in the sodium aluminate solution caused serious corrosion to Q235 steel, which is the material of the tank equipment. This study investigates the effect of corrosion time on Q...
V2CTx MXene is a promising anode material for lithium-ion batteries due to its high electrical conductivity and abundant active sites. However, the spatial environment within its layers restricts the function of its energy storage electrode. Herein,...
Semiconductor heterostructures have been the backbone of developments in electronic and optoelectronic devices. One class of structures of interest is the so-called type II band alignment, in which optically excited electrons and holes relax into dif...
The development of mixed oxide electrodes is being intensively investigated to reduce the high cost associated with the use of noble metals and to obtain versatile and long-lasting devices. To evaluate their use for charge storage or anodic oxidation...
Layered two-dimensional transition metal dichalcogenides and their heterostructures are of current interest, owing to the diversity of their applications in many areas of materials nanoscience and technologies. With this in mind, we have examined the...
Two-dimensional materials based vertical field-effect transistors have been widely studied due to their useful applications in industry. In the present study, we fabricate graphene/MoS2/(Cr/Au) vertical transistor based on the mechanical exfoliation...
This investigation explores the potential of enhancing aqueous zinc-ion batteries (AZIBs) through the introduction of a novel cathode material, NH4V4O10 (NVO), combined with reduced graphene oxide (rGO). Utilizing Density Functional Theory (DFT), it...
Organic pollutants in industrial wastewater present a severe threat to both the environment and human health. Photocatalytic technology, recognized for its eco-friendliness and high efficiency, has become a leading approach for degrading such polluta...
The selective photocatalytic reduction of O2 to H2O2 is an attractive route for sustainable H2O2 synthesis, yet its efficiency is often limited by the sluggish charge separation and insufficient selectivity of the two-electron oxygen reduction reacti...
The prototype misfit layer compound (SnS)1.17NbS2 consists alternatingly of a metallic triatomic NbS2 layer, in which Nb atoms are sandwiched by S atoms, and an insulating SnS double layer featuring a NaCl-type structure. Here we investigate the effe...
By performing first-principles calculations, we studied hexagonal-boron-nitride (hBN)-supported graphene, in which moiré structures are formed due to lattice mismatch or interlayer rotation. A series of graphene/hBN systems has been studied to...
Reducing the Schottky barrier at the metal–semiconductor interface and achieving Ohmic contact is crucial for the development of high-performance Schottky field-effect transistors. This paper investigates the stability, interface interactions,...
In this work, we report a low-cost and highly sensitive electrochemical sensor for detecting As(III) in water. The sensor uses a 3D microporous graphene electrode with nanoflowers, which enriches the reactive surface area and thus enhances its sensit...
Hydrogen-bonded organic frameworks (HOFs) are the focus of intense scientific research due their potential applications in science and technology. Here, we report on the synthesis, characterization, and photobehavior of a new HOF (T12F-1(124TCB)) bas...
Traditional single-layer reinforced concrete (RC) internal blast containment structures face challenges in blast resistance, crack control, and sealing integrity. Multi-layer composite configurations leveraging energy-absorbing interlayers have emerg...
Two-dimensional (2D) molybdenum disulfide (MoS2) is the most mature material in 2D material fields owing to its relatively high mobility and scalability. Such noticeable properties enable it to realize practical electronic and optoelectronic applicat...
Lithium–sulfur (Li-S) batteries are renowned for their high theoretical energy density and low cost, yet their practical implementation is hampered by the polysulfide shuttle effect and sluggish redox kinetics. Herein, a sol–gel strategy...
Valve sealing surfaces demand coatings with high load-bearing capacity, low friction, and corrosion resistance. This study presents a duplex coating system, comprising an AISI 4130 steel substrate, a WC-10Co4Cr interlayer, and a tetrahedral amorphous...
Layered double hydroxides (LDHs), also named hydrotalcite-like compounds, are anionic clays with a lamellar structure which have been extensively used in the last two decades as electrode modifiers for the design of electrochemical sensors. These mat...
Organic semiconductors have garnered significant interest owing to their low cost, flexibility, and suitability for large-area electronics, making them vital for burgeoning fields such as flexible electronics, wearable devices, and green energy techn...
Van der Waals heterojunctions based on transition metal dichalcogenides (TMDs) show promising potential in optoelectronic devices, due to the ultrafast separation of photoexcited carriers and efficient generation of the photocurrent. Herein, this stu...
In energy applications, the use of materials with hierarchical porous structures and large surface areas is essential for efficient charge storage. These structures facilitate rapid electron and ion transport, resulting in high power density and quic...
Molecular oxygen activation often suffers from high energy consumption and low efficiency. Developing eco-friendly and effective photocatalysts remains a key challenge for advancing green molecular oxygen activation. Herein, graphitic carbon nitride...
This study examines the interfacial and structural evolution of titanium disulfide (TiS2) during Ca2+ intercalation/deintercalation in concentrated aqueous CaCl2. Electrochemical measurements were combined with ex situ X-ray diffraction (XRD), X-ray...
Tuning the d-band electronic structure of non-noble-metal catalysts is a central strategy for an alkaline hydrogen evolution reaction (HER), yet how composition controls the d orbital in multi-Wyckoff-site layered systems remains insufficiently under...
Today, the development of new self-supporting electrode materials with high porosity and excellent degradation properties is of great importance for the removal of dye pollutants. Herein, this work synthesized nanoporous nickel@nickel oxide (np-Ni@Ni...
First-principle calculations based on the density functional theory (DFT) are implemented to study the structural and electronic properties of the SiS2/WSe2 hetero-bilayers. It is found that the AB-2 stacking model is most stable among all the six Si...
A facile approach to fabricate antibiofouling membrane was developed by grafting quaternary ammonium compounds (QACs) onto polyvinylidene fluoride (PVDF) membrane via surface-initiated activators regenerated by electron transfer atom-transfer radical...
Facing the increasingly scarce supply of rare-earth resources, a cobalt-doped metal–organic framework-derived carbon–metallic sulfide composite (Co-FeS2@C) was successfully synthesized via the hydrothermal method and the following carboni...
Lithium–sulfur (Li–S) batteries are promising next-generation energy-storage systems but are severely hindered by polysulfide shuttling, sluggish sulfur redox kinetics, and unstable Li2S nucleation/growth behavior. Herein, a multifunction...
of 2