Skip to Content

172 Results Found

  • Article
  • Open Access
6 Citations
2,696 Views
18 Pages

Elimination of Carbides in Carburized Layer of Stainless Steel/Carbon Steel by Horizontal Continuous Liquid–Solid Composite Casting

  • Jihong Sun,
  • Xuefeng Liu,
  • Yaohua Yang,
  • Wenjing Wang and ,
  • Xin Wang and
  • Weiliang Zhang
  • + 1 author+ 0 author

3 May 2023

The carbides in the carburized layer of stainless steel (SS)/carbon steel (CS) clad plates are prone to inducing intergranular cracks and reducing the interfacial bonding strength. In this paper, SS/CS clad plates were fabricated by horizontal contin...

  • Article
  • Open Access
22 Citations
7,201 Views
17 Pages

16 August 2018

The copper/aluminum (Cu/Al) clad sheets were produced on a horizontal twin-roll caster and then were multi-pass rolled and annealed. The thickness of the as-cast clad sheet was 8 mm. Rolling was performed with total reductions of 12.5%, 25%, 37.5%, 5...

  • Article
  • Open Access
7 Citations
3,247 Views
21 Pages

3 June 2023

Limiting casting expression speed was obtained and the flow redistribution and thermal history in a horizontal direct-chill (HDC) casting was predicted using the numerical modeling approach. The governing solidification equations were non-dimensional...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
11 Citations
5,190 Views
19 Pages

30 April 2020

In this research study, numerical modelling and experimental casting of AA6111 strips, 250 mm wide, 6 mm thick, was conducted. The velocity of the molten AA6111 alloy at the nozzle slot outlet was raised to 2 m/s, whilst the belt speed was kept at 0....

(This article belongs to the Special Issue Process Modeling in Pyrometallurgical Engineering)
  • Review
  • Open Access
53 Citations
26,368 Views
12 Pages

Continuous Casting Practices for Steel: Past, Present and Future

  • Roderick I. L. Guthrie and
  • Mihaiela M. Isac

18 May 2022

This historical review of casting methods used to produce sheets of steel for automobiles, household products, rocket bodies, etc., all point toward the development of one-step commercial processes, which are capable of casting liquid steel directly...

(This article belongs to the Special Issue Modeling and Simulation of Metallurgical Processes in Ironmaking and Steelmaking)
  • Communication
  • Open Access
1 Citations
3,750 Views
13 Pages

Critical Role of the Presynaptic Protein CAST in Maintaining the Photoreceptor Ribbon Synapse Triad

  • Akari Hagiwara,
  • Ayako Mizutani,
  • Saki Kawamura,
  • Manabu Abe and ,
  • Yamato Hida,
  • Kenji Sakimura and
  • Toshihisa Ohtsuka
  • + 2 authors+ 0 author

The cytomatrix at the active zone-associated structural protein (CAST) and its homologue, named ELKS, being rich in glutamate (E), leucine (L), lysine (K), and serine (S), belong to a family of proteins that organize presynaptic active zones at nerve...

(This article belongs to the Special Issue Ribbon Synapses: Molecular Mechanisms of Synaptic Signaling and Involvement in Diseases)
  • Article
  • Open Access
7 Citations
3,857 Views
14 Pages

5 July 2019

Is the variation in the compressive strength of concrete across the thickness of horizontally cast elements negligibly small or rather needs to be taken into account at the design stage? There are conflicting answers to this question. In order to det...

(This article belongs to the Special Issue Non-destructive Testing of Materials in Civil Engineering)
  • Article
  • Open Access
9 Citations
6,471 Views
15 Pages

The Analysis of Facio-Dental Proportions to Determine the Width of Maxillary Anterior Teeth: A Clinical Study

  • Naseer Ahmed,
  • Mohamad Syahrizal Halim,
  • Zuryati Ab-Ghani,
  • Maria Shakoor Abbasi and ,
  • Ayesha Aslam,
  • Jawad Safdar,
  • Gotam Das,
  • Abdul Razzaq Ahmed and
  • Nafij Bin Jamayet
  • + 4 authors+ 0 author

10 December 2022

The present study aimed to analyze mid horizontal facial third proportions, those being the interpupillary, inner intercanthal, and bizygomatic distance modified with golden proportion, The Preston proportion, golden percentage and 70% recurring esth...

(This article belongs to the Special Issue Clinical Advances in Cosmetic Dentistry)
  • Article
  • Open Access
1 Citations
2,438 Views
24 Pages

28 September 2024

The horizontal joint is a critical component of the prefabricated shear wall structure, responsible for supporting both horizontal shear forces and vertical loads along with the wall, thereby influencing the overall structural performance. This study...

(This article belongs to the Special Issue Advances in Novel Precast Concrete Structures)
  • Article
  • Open Access
600 Views
16 Pages

Experimental Investigations on Cold-Cast Anchor Stay Cables Under Vehicle Impact

  • Nan Yang,
  • Yaoyu Zhu,
  • Lei Dai,
  • Xiaochen Wei and ,
  • Yan Mao,
  • Tianyu Du and
  • Hai Fang
  • + 2 authors+ 0 author

30 March 2026

Direct vehicle impacts on stay cables are less understood than vehicle–pier collisions, especially for anchorage damage and post-impact load transfer. This study investigates the dynamic responses of stay cables under vehicular impact through a...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
656 Views
28 Pages

20 February 2026

This study investigates modular low-rise shear walls by designing and fabricating four in-plane loaded specimens at a scale ratio of 1:2.7. Quasi-static low-cycle reversed loading tests combined with numerical simulations were systematically conducte...

(This article belongs to the Special Issue Advancing Civil Engineering Construction and Management: Innovations in Green Building, Intelligent Construction, and Sustainable Infrastructure Development)
  • Article
  • Open Access
3 Citations
4,463 Views
12 Pages

Accuracy of Master Casts Generated Using Conventional and Digital Impression Modalities: Part 1—The Half-Arch Dimension

  • Mohammed E. Sayed,
  • Abdulkarim Hussain Alshehri,
  • Bandar M. A. Al-Makramani,
  • Fuad Al-Sanabani and ,
  • Fawzia Ibraheem Shaabi,
  • Fatimah H. Alsurayyie,
  • Walaa Magdy Ahmed,
  • Hosain Al-Mansour and
  • Saurabh Jain
  • + 4 authors+ 0 author

17 December 2021

Accurate impression-making is considered a vital step in the fabrication of fixed dental prostheses. There is a paucity of studies that compare the casts generated by various impression materials and techniques that are commonly used for the fabricat...

(This article belongs to the Special Issue Predictable Restorative Dentistry)
  • Article
  • Open Access
4 Citations
3,839 Views
12 Pages

Accuracy of Master Casts Generated Using Conventional and Digital Impression Modalities: Part 2—The Full Arch Dimension

  • Mohammed E. Sayed,
  • Hosain Al-Mansour,
  • Abdulkarim Hussain Alshehri,
  • Fuad Al-Sanabani and ,
  • Bandar M. A. Al-Makramani,
  • Maryam Hassan Mugri,
  • Walaa Magdy Ahmed,
  • Nasser M. Alqahtani,
  • Dalea Mohammed Bukhary and
  • Saurabh Jain
  • + 9 authors+ 4 authors

18 February 2022

The aim of this study was to evaluate the accuracy of master casts generated by conventional (putty and light body consistencies polyvinyl siloxane and alginate) and digital impression techniques on a typodont master model with full-arch-prepared abu...

(This article belongs to the Special Issue Predictable Restorative Dentistry)
  • Article
  • Open Access
1,789 Views
16 Pages

Pseudo-Dynamic Tests on Frame–Shear Wall Structure with Precast Concrete Diaphragm

  • Chun Han,
  • Xinhong Dong,
  • Qunshan Su,
  • Chunming Duan and
  • Guoping Tian

In order to study how to improve the spatial action of precast monolithic composite floor slabs, and examine replacing the cast-in-place surface layer for reducing the weight of structure, we used pseudo-dynamic tests on one-quarter scale models of t...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
6,361 Views
13 Pages

7 September 2022

Althouh cone beam computed tomography (CBCT) is popular for dental implant planning, the horizontal mesiodistal space of the edentulous ridge is still conventionally measured with a handheld sliding caliper in the oral cavity or on a plaster cast. Fo...

(This article belongs to the Special Issue Oral Implantology and Rehabilitation)
  • Article
  • Open Access
3 Citations
1,939 Views
22 Pages

Precast concrete structures are popular in the building industry because of their high efficiency and environmental friendliness. In this paper, the U-type reinforcement ferrule connection technique was applied to study the seismic performance of pre...

(This article belongs to the Special Issue Advanced Studies in Urban and Regional Planning)
  • Article
  • Open Access
522 Views
20 Pages

Experimental Study on the Seismic Performance of Assembled Shear Walls Based on UHPC Connections

  • Gang Chen,
  • Shiwei Yuan,
  • Qizhen Zheng,
  • Libo Long and ,
  • Huiyan Li and
  • Decai Nong
  • + 1 author+ 0 author

This paper investigates the seismic performance of precast concrete shear-wall subassemblies connected by post-cast ultra-high performance concrete (UHPC) zones and short lap-spliced reinforcement with a lap length of 10d, where d denotes the diamete...

(This article belongs to the Special Issue High- and Ultra-High Performance Concrete: Properties, Developments and Applications)
  • Proceeding Paper
  • Open Access
1 Citations
2,121 Views
8 Pages

Theoretical and Experimental Research on Centrifugal Casting of Short and Long Castings

  • Angel Velikov,
  • Ivan Georgiev,
  • Boyko Krastev and
  • Krum Petrov

The technological process of the centrifugal casting of short and long castings is examined during development. The values of the technological parameters at applying heat-resistant coating on the working surface of metal molds were established. With...

(This article belongs to the Proceedings of The 14th International Scientific Conference TechSys 2025—Engineering, Technologies and Systems)
  • Article
  • Open Access
55 Citations
11,429 Views
20 Pages

2 June 2017

In order to validate the seismic performance of precast concrete members with steel sleeve connections, pseudo-static tests on four prefabricated columns with vertical grouted splice sleeve connections and on a control group of two cast-in-situ colum...

  • Article
  • Open Access
10 Citations
4,520 Views
14 Pages

Shading by Overhang PV Collectors

  • Joseph Appelbaum,
  • Avi Aronescu and
  • Tamir Maor

12 October 2019

Photovoltaic modules integrated into buildings may provide shading to windows, doors and walls to protect against sun rays and at the same time generate ancillary electrical energy. The study develops the methodology for calculating the shadow variat...

(This article belongs to the Special Issue Next Generation Solar Cells, Modules and Applications)
  • Article
  • Open Access
9 Citations
7,858 Views
15 Pages

Variation of Shrinkage Strain within the Depth of Concrete Beams

  • Jong-Hyun Jeong,
  • Yeong-Seong Park and
  • Yong-Hak Lee

16 November 2015

The variation of shrinkage strain within beam depth was examined through four series of time-dependent laboratory experiments on unreinforced concrete beam specimens. Two types of beam specimens, horizontally cast and vertically cast, were tested; sh...

(This article belongs to the Section Advanced Materials Characterization)
  • Communication
  • Open Access
20 Citations
5,542 Views
7 Pages

Role of Roll Separating Force in High-Speed Twin-Roll Casting of Aluminum Alloys

  • Min-Seok Kim,
  • Hyoung-Wook Kim,
  • Su-Hyeon Kim and
  • Shinji Kumai

3 June 2019

The role of the roll separating force in the high-speed twin-roll casting of aluminum alloys was examined. In horizontal-type twin-roll casting, as the casting speed increased upon decreasing the roll separating force, the strip texture changed from...

(This article belongs to the Special Issue Casting and Forming of Advanced Aluminum Alloys)
  • Article
  • Open Access
18 Citations
6,727 Views
14 Pages

Fit and Retention of Cobalt–Chromium Removable Partial Denture Frameworks Fabricated with Selective Laser Melting

  • Stefan Rues,
  • Akinori Tasaka,
  • Isabella Fleckenstein,
  • Shuichiro Yamashita and ,
  • Peter Rammelsberg,
  • Sophia Boehm and
  • Franz Sebastian Schwindling
  • + 2 authors+ 0 author

Purpose: To evaluate fit and retention of cobalt–chromium removable partial denture (RPD) frameworks fabricated with selective laser melting (SLM). Methods: Three types of framework for clasp-retained RPDs were virtually designed and fabricated...

(This article belongs to the Special Issue Additive Manufacturing of Dental Materials)
  • Article
  • Open Access
18 Citations
4,462 Views
19 Pages

19 October 2020

Object selection is the basis of natural user–computer interaction (NUI) in a virtual environment (VE). Among the three-dimensional object selection techniques employed in virtual reality (VR), bare hand-based finger clicking interaction and ra...

(This article belongs to the Section A: Computer Science)
  • Article
  • Open Access
4 Citations
3,744 Views
16 Pages

Simulation Models in a Fluidity Test of the Al-Si Alloy

  • Marek Šolc,
  • Peter Blaško,
  • Jozef Petrík,
  • Lenka Girmanová and ,
  • Andrea Blašková,
  • Tomasz Małysa,
  • Joanna Furman and
  • Vladimír Socha
  • + 3 authors+ 0 author

12 April 2024

The goal of the fluidity test is to evaluate the ability of the melt to fill the cavity of the mold, which is one of the factors affecting the final quality of the castings. It is a technological test that is basically not standardized, therefore it...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
3,346 Views
16 Pages

Numerical Simulation of Copper-Aluminum Composite Plate Casting and Rolling Process and Composite Mechanism

  • Qinghua Chang,
  • Peikai Gao,
  • Junyi Zhang,
  • Yiqang Huo and ,
  • Zheng Zhang and
  • Jingpei Xie
  • + 1 author+ 0 author

16 November 2022

This paper uses ANSYS Workbench platform to simulate the casting and rolling composite process, taking the horizontal type casting and rolling machine as the research object, and conducts the numerical simulation study of copper-aluminum composite so...

(This article belongs to the Special Issue Advanced Metal Matrix Functional Composites and Applications)
  • Review
  • Open Access
70 Citations
8,928 Views
10 Pages

10 February 2017

Although a relatively recently emerged virus, identified only in 2004 as a separate species of avian astrovirus, chicken astrovirus (CAstV) has been associated with poor growth of broiler flocks, enteritis and diarrhea and is a candidate pathogen in...

(This article belongs to the Special Issue Astroviruses)
  • Article
  • Open Access
8 Citations
3,223 Views
21 Pages

9 December 2020

The brake effect of the freestanding adjustable combination electromagnetic brake (FAC-EMBr) and EMBr ruler on the behavior of molten steel flow and the level fluctuation were investigated with the numerical method. The effects of the horizontal magn...

  • Article
  • Open Access
33 Citations
4,949 Views
18 Pages

Mechanical Properties of Selective Laser Sintering Pure Titanium and Ti-6Al-4V, and Its Anisotropy

  • Yuu Harada,
  • Yoshiki Ishida,
  • Daisuke Miura,
  • Satoru Watanabe and ,
  • Harumi Aoki,
  • Taira Miyasaka and
  • Akikazu Shinya
  • + 2 authors+ 0 author

11 November 2020

Selective laser sintering (SLS) is being developed for dental applications. This study aimed to investigate the properties of Ti-6Al-4V and pure titanium specimens fabricated using the SLS process and compare them with casting specimens. Besides, the...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Article
  • Open Access
5 Citations
2,504 Views
17 Pages

Non-Uniform Thermal Transfer of Molten Steel and Its Effect on Inclusion Particles Removal Behavior in Continuous Casting Tundish

  • Zhixiao Zhang,
  • Tianpeng Qu,
  • Deyong Wang,
  • Xianglong Li and ,
  • Lei Fan and
  • Xingzhi Zhou
  • + 1 author+ 0 author

8 February 2025

The temperature gradient inside a tundish leads to the uneven density distribution of molten steel, resulting in thermal buoyancy, which has a significant impact on the motion of inclusion particles. Based on practice data and necessary assumptions,...

  • Article
  • Open Access
10 Citations
2,931 Views
14 Pages

Numerical and Experimental Study on Carbon Segregation in Square Billet Continuous Casting with M-EMS

  • Pengchao Li,
  • Guifang Zhang,
  • Peng Yan,
  • Peipei Zhang and ,
  • Nan Tian and
  • Zhenhua Feng
  • + 1 author+ 0 author

9 August 2023

Electromagnetic stirring (M-EMS) has been extensively applied in continuous casting production to reduce the quality defects of casting billets. To investigate the effect of continuous casting electromagnetic stirring on billet segregation, a 3D mult...

(This article belongs to the Special Issue Recovery of Non-ferrous Metal from Metallurgical Residues)
  • Article
  • Open Access
52 Citations
7,736 Views
17 Pages

11 January 2019

Electromagnetic stirring in mold (M-EMS) has been widely used in continuous casting process to improve the solidification quality of the steel strand. In the present study, a 3D multi-physical-field mathematical model was developed to predict the mac...

(This article belongs to the Special Issue Optimization of Industrial Casting Processes)
  • Article
  • Open Access
15 Citations
5,389 Views
22 Pages

21 March 2019

The technique of flattening the temperature profile and controlling the formation of both the dendritic microstructure and grain structure in the directional solidification of nickel-based superalloy casting, using the novel inner radiation baffles (...

(This article belongs to the Special Issue Superalloys–Currents Trends in Development of Their Microstructure and Properties)
  • Article
  • Open Access
11 Citations
4,208 Views
12 Pages

25 April 2020

In order to achieve the industrial application of ultrasonic energy in the continuous casting and rolling production of aluminum alloy, a new type of L-shaped ultrasonic rod was used to introduce an ultrasonic bending vibration into the aluminum melt...

(This article belongs to the Special Issue Ultrasound for Material Characterization and Processing)
  • Article
  • Open Access
10 Citations
4,139 Views
12 Pages

Marginal Misfit of 3D-Printed (Selective Laser Sintered), CAD-CAM and Lost Wax Technique Cobalt Chromium Copings with Shoulder and Chamfer Finish Lines: An In-Vitro Study

  • Samar Al-Saleh,
  • Fahim Vohra,
  • Shabab M. Albogami,
  • Nawaf M. Alkhammash and ,
  • Mohammed A. Alnashwan,
  • Naif S. Almutairi,
  • Khalid A. Aali,
  • Mohammed Alrabiah and
  • Tariq Abduljabbar
  • + 4 authors+ 0 author

20 September 2022

Background and Objectives: The aim was to compare the Misfit of 3D-Printed, Selective laser melting (SLM), milled (Computer aided design-Computer aided manufacture CAD-CAM) and Lost wax technique (LWT) fabricated Cobalt chromium (CoCr) alloy copings...

(This article belongs to the Collection New Concepts for Dental Treatments and Evaluations)
  • Article
  • Open Access
9 Citations
3,252 Views
21 Pages

20 September 2022

The manufacture of elements containing two types of concrete allows for the minimization of the amount of Portland cement by matching the properties of concrete with local structural and durability requirements. The most common production method of t...

  • Article
  • Open Access
6 Citations
5,768 Views
19 Pages

7 May 2021

In a precast concrete (PC) composite beam, the horizontal interface between the PC beam and the cast-in-place (CIP) slab is located either on the compression side or on the tensile side of the cross-section. If the CIP slab is on the compression side...

(This article belongs to the Special Issue Structural Performances of Concrete Composite Members: Experimental, Theoretical, Numerical Approaches II)
  • Article
  • Open Access
1 Citations
1,256 Views
19 Pages

7 May 2025

Herein, a three-dimensional mathematical model was established to investigate the metallurgical behavior of liquid steel in a funnel-shaped mold equipped with single-ruler electromagnetic braking (EMBr). The effects of mold thicknesses, electromagnet...

(This article belongs to the Special Issue Advanced Ladle Metallurgy and Secondary Refining)
  • Article
  • Open Access
2,521 Views
13 Pages

29 April 2025

Semi-continuous casting is an important method for the large-scale production of high-strength conductive copper-iron (Cu-Fe) alloys in the future. However, serious peeling defects were found on the surface of cold-rolled strips during industrial tri...

  • Perspective
  • Open Access
21 Citations
8,274 Views
11 Pages

23 September 2023

In the secondary metals refining processes, vacuum arc remelting (VAR) and electroslag remelting (ESR), the consumable electrode is commonly produced by vacuum induction melting (VIM) which employs the regrettably primitive casting technique of simpl...

(This article belongs to the Special Issue Failure and Degradation of Metals)
  • Article
  • Open Access
15 Citations
5,397 Views
12 Pages

Contour Changes Following Immediate Placement of Ultra-Wide Implants in Molar Extraction Sockets without Bone Grafting

  • André Hattingh,
  • Hugo De Bruyn,
  • Manù Van Weehaeghe,
  • Geert Hommez and
  • Stefan Vandeweghe

4 August 2020

The aim was to evaluate ridge reduction and mucosal recession following immediate placement of ultra-wide implants in molar sockets, without bone grafting. Impressions were taken prior to tooth extraction, 4 months and 1 year after implant placement....

(This article belongs to the Special Issue Clinical Advances in Implant Dentistry)
  • Article
  • Open Access
20 Citations
8,366 Views
14 Pages

Influence of Orientation and Radiative Heat Transfer on Aluminum Foams in Buoyancy-Induced Convection

  • Marijn Billiet,
  • Sven De Schampheleire,
  • Henk Huisseune and
  • Michel De Paepe

9 October 2015

Two differently-produced open-cell aluminum foams were compared to a commercially available finned heat sink. Further, an aluminum plate and block were tested as a reference. All heat sinks have the same base plate dimensions of four by six inches. T...

(This article belongs to the Special Issue Metal Foams: Synthesis, Characterization and Applications)
  • Article
  • Open Access
13 Citations
4,230 Views
22 Pages

5 November 2019

Experiments were performed on four specimens of steel frames with infilled recycled aggregate concrete shear walls (SFIRACSWs), one specimen of infilled ordinary concrete wall, and one pure-steel frame were conducted under horizontal low cyclic loadi...

(This article belongs to the Special Issue Green Concrete for a Better Sustainable Environment)
  • Article
  • Open Access
5 Citations
2,706 Views
19 Pages

Research on Bearing Capacity of a Novel Prestressed Concrete Prefabricated Foundation with High Uplift Resistance Characteristic

  • Wei Zhang,
  • Zhengzhong Ding,
  • Hewen Kang,
  • Pengzhong Lin and ,
  • Guolu Wen,
  • Deng Yong,
  • Chouxiao Lu,
  • Jiawei Wang,
  • Xiangrui Meng and
  • Li Tian
  • + 6 authors+ 1 author

24 November 2024

Unlike traditional building structures, transmission tower foundations endure significant vertical and horizontal loads, with particularly high uplift resistance requirements in complex terrains. Moreover, challenges such as difficult material transp...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
5 Citations
2,957 Views
21 Pages

11 September 2023

Micropile groups have been progressively more frequently adopted in the construction of transmission tower bases due to their compact size and flexible construction advantages. However, the load-bearing characteristics and deformation mechanisms of m...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
6 Citations
2,325 Views
25 Pages

18 December 2023

Epoxy resin concrete has superior mechanical properties compared to ordinary concrete, and will play an increasingly important role in urban construction. In this paper, the application effect and prospect of epoxy resin concrete in precast composite...

(This article belongs to the Special Issue Advanced Studies in Urban and Regional Planning)
  • Article
  • Open Access
8 Citations
3,786 Views
24 Pages

16 October 2023

This paper aims to explore the structural performance of 3D-printed and casted cement-based steel-reinforced concrete beams and one-way slabs incorporating short carbon fibre and activated carbon powder, which have been shown to enhance concrete&rsqu...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
18 Citations
3,582 Views
16 Pages

Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers

  • Sabbah Ataya,
  • Mohamed M. El-Sayed Seleman,
  • Fahamsyah H. Latief,
  • Mohamed M. Z. Ahmed and ,
  • Khalil Hajlaoui,
  • Yousef G. Y. Elshaghoul and
  • Mohamed I. A. Habba
  • + 2 authors+ 0 author

10 July 2022

In this study, AZ91/23 vol.% short carbon fiber composite was produced by a squeeze casting technique using a cylindrical pre-form of treated carbon fibers, in which the fibers are randomly oriented in the horizontal plane. Cylindrical specimens (hei...

(This article belongs to the Special Issue Advanced Manufacturing of Metals and Composites: Effect of Processes on Microstructure and Mechanical Properties)
  • Article
  • Open Access
3 Citations
2,897 Views
13 Pages

25 August 2022

This work describes the fabrication of AZ91D/A5052 clad strips by direct cladding from molten metals using a horizontal twin roll caster. Subsequently, the effects of roll speed, pouring sequence, and solidification length on the AZ91D/A5052 clad str...

(This article belongs to the Special Issue Casting and Forming of Light Alloys)
  • Article
  • Open Access
4 Citations
2,827 Views
9 Pages

13 September 2023

Previous studies have reported an increased postural sway after short-term unilateral lower limb movement restriction, even in healthy subjects. However, the associations of motion limitation have not been fully established. The question of whether s...

of 4