Skip to Content

14,821 Results Found

  • Article
  • Open Access
26 Citations
3,132 Views
19 Pages

27 January 2023

The distribution of the initial temperature field of a high-rock-temperature tunnel is critical for determining the tunnel line and the construction scheme. This study used model testing, numerical analysis, and field measurement to investigate the i...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
3 Citations
3,041 Views
13 Pages

10 November 2024

For next-generation power systems, particularly aero-gas turbine engines, ultra-light and highly efficient heat exchangers are considered key enabling technologies for realizing advanced cycles. Consequently, the development of efficient and accurate...

(This article belongs to the Section Machines Testing and Maintenance)
  • Article
  • Open Access
7 Citations
5,019 Views
18 Pages

15 November 2018

Inertial navigation systems (INSs) use the temperature control system to ensure the stability of the temperature of the inertial sensors for improving the navigation accuracy of the INSs. That is, the temperature control accuracy affects the performa...

(This article belongs to the Special Issue Inertial Sensors and Systems 2018)
  • Proceeding Paper
  • Open Access
1 Citations
2,950 Views
7 Pages

Creep life prediction is very important to maintain safe operation of thermal power plants for a long-term period. In this study, an alternative creep life prediction method was proposed based on a relationship between creep exponent n and creep coef...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
10 Citations
3,088 Views
10 Pages

Design of the LIMELIGHT Test Rig for Component Testing for High-Temperature Thermal Energy Storage with Liquid Metals

  • Klarissa Niedermeier,
  • Martin Lux,
  • Anisa Purwitasari,
  • Alfons Weisenburger and ,
  • Markus Daubner,
  • Franziska Müller-Trefzer and
  • Thomas Wetzel
  • + 2 authors+ 0 author

13 October 2023

Thermal energy storage systems for high temperatures >600 °C are currently mainly based on solid storage materials that are thermally charged and discharged by a gaseous heat transfer fluid. Usually, these systems benefit from low storage mate...

(This article belongs to the Special Issue Processes in 2023)
  • Article
  • Open Access
4 Citations
2,607 Views
21 Pages

Improper layout of drainage structures and inadequate insulation measures in high-altitude cold areas have resulted in varying degrees of frost damage in numerous tunnels during operation. To address this issue and propose a viable drainage structure...

(This article belongs to the Special Issue Advances and Applications in Geotechnical and Structural Engineering)
  • Article
  • Open Access
10 Citations
8,234 Views
20 Pages

High-Temperature Storage Testing of ACF Attached Sensor Structures

  • Sanna Lahokallio,
  • Maija Hoikkanen,
  • Jyrki Vuorinen and
  • Laura Frisk

10 December 2015

Several electronic applications must withstand elevated temperatures during their lifetime. Materials and packages for use in high temperatures have been designed, but they are often very expensive, have limited compatibility with materials, structur...

  • Article
  • Open Access
12 Citations
4,447 Views
24 Pages

10 November 2022

Given the lack of primary data on heat-resistant composites under high-temperature conditions, the focus of this paper is the development of an in-plane biaxial apparatus under high temperatures and complex loads. Besides loading complex loads up to...

(This article belongs to the Section Material Processing Technology)
  • Article
  • Open Access
53 Citations
7,442 Views
16 Pages

Non-Destructive Inspection of High Temperature Piping Combining Ultrasound and Eddy Current Testing

  • David Santos,
  • Miguel A. Machado,
  • João Monteiro,
  • José P. Sousa and ,
  • Carla S. Proença,
  • Fernando S. Crivellaro,
  • Luís S. Rosado and
  • Telmo G. Santos
  • + 3 authors+ 0 author

22 March 2023

This paper presents an automated Non-Destructive Testing (NDT) system for the in-service inspection of orbital welds on tubular components operating at temperatures as high as 200 °C. The combination of two different NDT methods and respective in...

(This article belongs to the Special Issue Advanced Sensing and Evaluating Technology in Nondestructive Testing)
  • Article
  • Open Access
8 Citations
3,113 Views
15 Pages

3 December 2023

Conducting high-temperature tests on ceramics-containing lithium, which are employed as tritium breeding materials, plays a crucial role in comprehending their ability to withstand degradation and maintain their strength properties throughout operati...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
2 Citations
1,871 Views
13 Pages

15 December 2022

Aiming at a problem that it is difficult for accurately obtaining the mathematical model of a gas temperature for a high-speed, high-temperature heat-airflow test system, a grey box modeling method combining first principle of modeling, recursive lea...

  • Article
  • Open Access
6 Citations
3,715 Views
11 Pages

Au Wire Ball Welding and Its Reliability Test for High-Temperature Environment

  • Chenyang Wu,
  • Junqiang Wang,
  • Xiaofei Liu,
  • Mengwei Li and ,
  • Zehua Zhu and
  • Yue Qi
  • + 1 author+ 0 author

27 September 2022

The long-term application of sensors in a high-temperature environment needs to address several challenges, such as stability at high temperatures for a long time, better wiring interconnection of sensors, and reliable and steady connection of the se...

(This article belongs to the Special Issue Advanced Interconnect and Packaging)
  • Article
  • Open Access
4 Citations
3,584 Views
14 Pages

2 March 2023

The temperature effect caused by high slip has an important influence on the operation performance and reliability of magnetic coupling. Taking the self-developed single disk asynchronous magnetic coupling as the research object, the heat loss equati...

  • Article
  • Open Access
4 Citations
3,046 Views
18 Pages

Intracore Natural Circulation Study in the High Temperature Test Facility

  • Izabela Gutowska,
  • Robert Kile,
  • Brian G. Woods and
  • Nicholas R. Brown

14 November 2024

The development of the Modular High-Temperature Gas-Cooled Reactor is a significant milestone in advanced nuclear reactor technology. One of the concerns for the reactor’s safe operation is the effects of a loss-of-flow accident (LOFA) where th...

  • Article
  • Open Access
5 Citations
3,551 Views
11 Pages

Effects of High Temperature Exposure on the Wingate Test Performance in Male University Students

  • Víctor Toro-Román,
  • Isaac Prieto-González,
  • Jesús Siquier-Coll,
  • Ignacio Bartolomé and ,
  • Francisco J. Grijota and
  • Marcos Maynar-Mariño
  • + 1 author+ 0 author

It has been suggested that heat exposure prior to exercise could induce changes in anaerobic exercise. Therefore, the purpose of this study was to observe the effects of high temperature heat exposure prior to an anaerobic test. Twenty-one men (age:...

(This article belongs to the Section Exercise and Health)
  • Article
  • Open Access
13 Citations
4,784 Views
19 Pages

Analysis and Simulation of Polymer Injectivity Test in a High Temperature High Salinity Carbonate Reservoir

  • Mohamed Adel Alzaabi,
  • Juan Manuel Leon,
  • Arne Skauge and
  • Shehadeh Masalmeh

27 May 2021

Polymer flooding has gained much interest within the oil industry in the past few decades as one of the most successful chemical enhanced oil recovery (CEOR) methods. The injectivity of polymer solutions in porous media is a key factor in polymer flo...

(This article belongs to the Special Issue Polymer Flooding and Rheology)
  • Review
  • Open Access
29 Citations
15,327 Views
17 Pages

9 November 2020

The high voltage temperature humidity bias test (HV-THB) has become increasingly popular for evaluating the performances of power semiconductor devices. Given the new challenges of the power semiconductor industry, several applications and devices ne...

(This article belongs to the Section Power Electronics)
  • Article
  • Open Access
5 Citations
1,725 Views
20 Pages

20 March 2024

In order to research the residual mechanical properties of concrete shield tunnel segments after exposure to high temperatures, two types of concrete segments were designed: a self-compacting concrete segment and a mixed fiber (steel fiber and polypr...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
13 Citations
4,234 Views
13 Pages

28 February 2023

Due to material plastic deformation and current leakage at high temperatures, SOI (silicon-on-insulator) and SOS (silicon-on-sapphire) pressure sensors have difficulty working over 500 °C. Silicon carbide (SiC) is a promising sensor material to s...

(This article belongs to the Special Issue MEMS/NEMS Sensors and Actuators, 2nd Edition)
  • Article
  • Open Access
20 Citations
5,981 Views
10 Pages

Wedge-Splitting Test on Carbon-Containing Refractories at High Temperatures

  • Martin Stückelschweiger,
  • Dietmar Gruber,
  • Shengli Jin and
  • Harald Harmuth

8 August 2019

The mode I fracture behavior of ordinary refractory materials is usually tested with the wedge-splitting test. At elevated temperatures, the optical displacement measurement is difficult because of the convection in the furnace and possible reactions...

(This article belongs to the Special Issue Fatigue and Fracture of Non-metallic Materials and Structures)
  • Communication
  • Open Access
23 Citations
5,268 Views
11 Pages

23 December 2020

The harmonic reducer, with its advantages of high precision, low noise, light weight, and high speed ratio, has been widely used in aerospace solar wing deployment mechanisms, antenna pointing mechanisms, robot joints, and other precision transmissio...

(This article belongs to the Section Machines Testing and Maintenance)
  • Proceeding Paper
  • Open Access
2 Citations
2,549 Views
6 Pages

Experimental Approach for Metals Mechanical Behavior Characterization at High Temperature: Development of a Complex Tensile Test Machine

  • Arnaud Pignolet,
  • Christelle Combeaud,
  • Francis Fournier,
  • Gilbert Fiorucci and ,
  • Christophe Pradille,
  • Yancheng Zhang,
  • Aliz Pinto-Mora,
  • Feng Gao and
  • Michel Bellet
  • + 4 authors+ 0 author

To characterize the mechanical behaviour at high temperature close to the melting point, a tensile test machine has been developed through resistive heating by Joule effect. A closed chamber is designed to control the working environment. By the two...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
8 Citations
6,418 Views
9 Pages

26 June 2019

Inconel 625 alloys are widely applied for high-corrosion resistance and as high-efficiency materials in aeronautical, aerospace, chemical, nuclear, petrochemical, and marine industries. Although Inconel 625 alloys are excellent materials, they cannot...

  • Article
  • Open Access
3 Citations
4,181 Views
11 Pages

Results of High-Temperature Heating Test for Irradiated U-10Zr(-5Ce) with T92 Cladding Fuel

  • June-Hyung Kim,
  • Jin-Sik Cheon,
  • Byoung-Oon Lee,
  • Jun-Hwan Kim and ,
  • Hee-Moon Kim,
  • Boung-Ok Yoo,
  • Yang-Hong Jung,
  • Sang-Bok Ahn and
  • Chan-Bock Lee
  • + 4 authors+ 0 author

15 November 2016

A microstructure observation using an optical microscope, SEM and EPMA was performed for the irradiated U-10Zr and U-10Zr-5Ce fuel slugs with a T92 cladding specimen after a high-temperature heating test. Also, the measured eutectic penetration rate...

  • Article
  • Open Access
10 Citations
1,462 Views
16 Pages

24 August 2025

High-modulus asphalt, with its excellent fatigue resistance and high-temperature resistance, is gradually becoming a preferred material for the development of durable asphalt pavements. However, its poor low-temperature performance has become one of...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
2,524 Views
9 Pages

31 December 2020

The influence of microstructure evolution on the dynamic mechanical properties, including storage modulus and internal friction, of the 2.5D SiCf/SiCm composites after high-temperature treatment (800 °C and 1400 °C) in the air was investigate...

  • Article
  • Open Access
490 Views
32 Pages

Fluid–Thermal Characteristics and Thermo-Mechanical Response of a Wide-Temperature-Range Gas-Mixing System for a High-Altitude Test Chamber

  • Changlong Ruan,
  • Yang Liu,
  • Lei Guo,
  • Qiang Zhang and ,
  • Guang Liu,
  • Yue Wang,
  • Ming Li,
  • Fuqiang Liu,
  • Yong Mu and
  • Xiangwei Dong
  • + 6 authors+ 1 author

31 August 2026

The front-end wide-temperature-range gas-mixing flow system of a high-altitude test chamber is a key component for simulating inlet conditions over a wide temperature range, and the temperature uniformity of the mixed gas as well as the positional st...

(This article belongs to the Section Process Safety and Risk Management)
  • Communication
  • Open Access
7 Citations
4,851 Views
12 Pages

24 May 2021

At-home foot temperature monitoring may be useful in the early recognition of imminent foot ulcers that occur through biomechanical loading in people with diabetes. We assessed the concurrent validity, test–retest reliability, and usability of a new...

(This article belongs to the Collection Sensors in Biomechanics)
  • Article
  • Open Access
14 Citations
3,893 Views
22 Pages

27 December 2022

In order to investigate the high and low temperature rheological properties and fuel corrosion resistance of epoxy resin on SBS modified asphalt, epoxy resin/SBS composite modified asphalt (ER/SBS) was prepared by high-speed shear. Moreover, composit...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
1,116 Views
22 Pages

12 November 2025

Deep oil and gas reservoirs exist under high-temperature and high-pressure (HTHP) conditions. Conventional coring without thermal preservation during retrieval induces thermal imbalance, biasing petrophysical and phase measurements and distorting res...

(This article belongs to the Special Issue Advances in the Principles and Technologies for the Physical and Mechanical Behaviors of Deep Rock)
  • Article
  • Open Access
4 Citations
1,594 Views
15 Pages

21 June 2025

Fused filament fabrication of thermoplastic composites has grown exponentially owing to its efficiency, thereby meeting numerous engineering demands. However, these materials have limitations owing to their structural vulnerability to elevated temper...

(This article belongs to the Special Issue Mechanical Behaviour of Polymeric-Based Systems Used in Engineering Applications)
  • Article
  • Open Access
20 Citations
4,253 Views
18 Pages

15 February 2023

A multi-functional friction and wear testing machine was used to test the pin disk wear of high-speed railway brake friction material under different disk temperatures (20 °C, 100 °C, and 200 °C) and different ambient humidities (55%, 95%...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
829 Views
12 Pages

Basic Concept of Purity Analysis of Facilities for High-Temperature Non-Oxide Crystal Growth

  • Elena Voronina,
  • Elena Mozhevitina,
  • Karina Kim,
  • Victoria Solomatina and ,
  • Oleg Nefedov and
  • Igor Avetissov
  • + 1 author+ 0 author

14 December 2025

The general procedure for measurement of impurities in hot zones of high-temperature growth setups is proposed and developed. In the first step, we prepared extra-pure 15 × 15 × 8 mm collecting cubes from composite graphite by high-temper...

(This article belongs to the Section Industrial Crystallization)
  • Article
  • Open Access
19 Citations
3,467 Views
16 Pages

Influence of Petroleum-Based and Bio-Derived Recycling Agents on High-RAP Asphalt Mixtures Performance

  • Ibrahim Elnaml,
  • Louay N. Mohammad,
  • Gaylon L. Baumgardner,
  • Jun Liu and ,
  • Samuel Cooper and
  • Samuel Cooper
  • + 1 author+ 0 author

20 February 2024

Reclaimed asphalt pavement (RAP) has been utilized as a potential partial substitute for virgin asphalt binder in asphalt mixtures. However, a primary concern with increasing RAP content in asphalt mixtures is the cracking potential, attributed to th...

(This article belongs to the Special Issue Advances in Performance-Based Asphalt and Asphalt Mixtures)
  • Article
  • Open Access
12 Citations
4,509 Views
15 Pages

21 January 2020

Due to their high strength-to-weight-ratio, magnesium alloys are very attractive for use in automotive engineering. For application at elevated temperatures, the alloys must be creep-resistant. Therefore, the influence of the operating temperature on...

  • Article
  • Open Access
71 Citations
4,866 Views
18 Pages

A Study on the Heat Transfer of Surrounding Rock-Supporting Structures in High-Geothermal Tunnels

  • Mingnian Wang,
  • Yunpeng Hu,
  • Dagang Liu,
  • Cheng Jiang and ,
  • Qiling Wang and
  • Yicheng Wang
  • + 1 author+ 0 author

27 March 2020

The temperature distribution is one of the most vital parameters which should be fully considered in high geothermal tunnel design. For the purpose of studying the impact of temperature disturbance caused by construction on temperature distribution o...

(This article belongs to the Section Environmental Sciences)
  • Article
  • Open Access
330 Views
19 Pages

Reference-Anchored Constrained Multi-Objective Optimization of High-Temperature Sodium Heat Pipes Under Rated Power-Test Conditions

  • Haoran Wang,
  • Yueling Zhang,
  • Qiming Men,
  • Jiale Gu and ,
  • Putai Zhang,
  • Sun Jin,
  • Quan Zhou and
  • Mian Li
  • + 3 authors+ 0 author

23 September 2026

High-temperature sodium heat pipes are promising passive heat-transfer components, yet numerical redesign is often disconnected from manufactured and power-tested hardware. This study develops a reference-anchored constrained bi-objective optimizatio...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
4 Citations
4,867 Views
18 Pages

22 July 2020

Railway vehicles are being exposed with increasing frequency to conditions of severe heat and cold because of changes in the climate. Trains departing from Asia travel to Europe through the Eurasian continent and vice versa. Given these circumstances...

(This article belongs to the Special Issue Advances in Very-High-Cycle Fatigue)
  • Article
  • Open Access
4 Citations
4,499 Views
8 Pages

27 November 2017

Continuous ultrasonic in-situ monitoring for industrial applications is difficult owing to the high operating temperatures in industrial fields. It is expected that ultrasonic transducers consisting of a CaBi4Ti4O15(CBT)/Pb(Zr,Ti)O3(PZT) sol-gel comp...

(This article belongs to the Special Issue Materials and Applications for Sensors and Transducers)
  • Article
  • Open Access
8 Citations
5,717 Views
19 Pages

The Versatility of HVOF Burner Rig Testing for Ceramic Matrix Composite Evaluation

  • Gregory N. Morscher,
  • Ragav P. Panakarajupally and
  • Leland Hoffman

20 August 2021

Effective testing of ceramic matrix composites (CMCs) and CMC/coating systems for high temperature, high stress, high velocity and/or severe oxidation/corrosion environments is a critical need in materials/coatings evaluation for extreme environments...

(This article belongs to the Special Issue Ceramic-Matrix Composites)
  • Article
  • Open Access
4,323 Views
11 Pages

Prediction of the Residual Creep Life of SA335-P22 Steel Main Steam Pipelines

  • Zhicheng Wang,
  • Youjun Ye,
  • Lingjian Dong and
  • Bumei Wang

4 January 2023

In this study, the comprehensive properties of a P22 high-temperature steam pipeline with moderate spheroidization were evaluated after more than 11,700 h of operation through a series of physico-chemical properties testing, especially for a creep te...

  • Article
  • Open Access
14 Citations
4,424 Views
22 Pages

Effects of Temperature and Strain Rate on the Ductility of an API X65 Grade Steel

  • Gabriele Cortis,
  • Filippo Nalli,
  • Marco Sasso,
  • Luca Cortese and
  • Edoardo Mancini

26 February 2022

In the last few decades, great effort has been spent on advanced material testing and the development of damage models intended to estimate the ductility and fracture of ductile metals. While most studies focused on static testing are applied at room...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
3 Citations
3,085 Views
13 Pages

Effect of High Temperature on Mechanical Properties and Microstructure of HSFCM

  • Yanbin Li,
  • Qingsheng Meng,
  • Yan Zhang,
  • Huadong Peng and
  • Tao Liu

A new type of composite cement-based cementing material—high-strength fast cementing material (HSFCM)—will be widely used in marine engineering projects such as submarine tunnels. However, the influence of fire and other high temperature...

(This article belongs to the Special Issue Advances in Marine Engineering: Geological Environment and Hazards II)
  • Article
  • Open Access
16 Citations
4,970 Views
29 Pages

18 September 2021

The rapid development of modern society has increased the demand for high-performance geo-materials. As an advanced cementitious composite, fiber-reinforced concrete has attracted much attention and has been widely applied to various buildings and ci...

(This article belongs to the Special Issue Advances in High-Performance Fiber-Reinforced Concrete)
  • Article
  • Open Access
6 Citations
7,272 Views
37 Pages

11 February 2025

Austenitic stainless steel SS316LN is used as the material of construction of the vessel and core components of fast breeder reactors, which operate at an elevated temperature of 550 °C. For design and integrity analysis using the finite element...

(This article belongs to the Topic Multi-scale Modeling and Optimisation of Materials)
  • Article
  • Open Access
121 Citations
21,950 Views
13 Pages

Mechanical Behavior of Inconel 625 at Elevated Temperatures

  • Mauro M. de Oliveira,
  • Antônio A. Couto,
  • Gisele F. C. Almeida,
  • Danieli A. P. Reis and ,
  • Nelson B. de Lima and
  • Renato Baldan
  • + 1 author+ 0 author

7 March 2019

Inconel 625 is a nickel-based alloy that is mainly used in high-temperature applications. Inconel 625 exhibits an unstable plastic flow at elevated temperatures characterized by serrated yielding, well-known as the Portevin-Le Chatelier effect. The e...

(This article belongs to the Special Issue Alloys for High-Temperature Applications)
  • Article
  • Open Access
16 Citations
2,806 Views
19 Pages

7 June 2023

The performance of an asphalt mixture is significantly affected by the properties of its asphalt mortar, which consists of an asphalt binder, mineral fillers, fine aggregates and air voids. The aim of this work was to evaluate the correlations betwee...

(This article belongs to the Special Issue Asphalt Pavement: Materials, Design and Characterization)
  • Article
  • Open Access
4 Citations
3,270 Views
14 Pages

16 December 2022

Equipment corrosion often happens in the petrochemical industry, especially when high temperature materials are transported. The corrosion phenomenon should be monitored as a leak may occur due to corrosion and even cause fires and explosions. Howeve...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
12 Citations
4,029 Views
15 Pages

4 January 2022

Concrete-encased concrete-filled steel tube (CFST) composite columns provide high bearing capacity, good seismic performance and an easier connection with arbitrary angle beams, which are widely used in high-rise buildings. Considering the high frequ...

  • Article
  • Open Access
60 Citations
11,398 Views
16 Pages

High Temperature Shear Horizontal Electromagnetic Acoustic Transducer for Guided Wave Inspection

  • Maria Kogia,
  • Tat-Hean Gan,
  • Wamadeva Balachandran,
  • Makis Livadas and ,
  • Vassilios Kappatos,
  • Istvan Szabo,
  • Abbas Mohimi and
  • Andrew Round
  • + 3 authors+ 0 author

22 April 2016

Guided Wave Testing (GWT) using novel Electromagnetic Acoustic Transducers (EMATs) is proposed for the inspection of large structures operating at high temperatures. To date, high temperature EMATs have been developed only for thickness measurements...

(This article belongs to the Section Physical Sensors)

of 297