- Article
To investigate characteristic stress and energy evolution law of carbonaceous shale under dry–wet cycles and fissure angle, several samples with prefabricated fissure angles were prepared and subjected to the coupled influence of dry–wet...
To investigate characteristic stress and energy evolution law of carbonaceous shale under dry–wet cycles and fissure angle, several samples with prefabricated fissure angles were prepared and subjected to the coupled influence of dry–wet...
Anchored surrounding rock is prone to large nonlinear deformation and instability failure under dynamic disturbances. The fissures and defects within the surrounding rock make the rock mass’s bearing characteristics and deformation instability...
The Baise Basin is a Paleogene pull-apart basin with numerous strike-slip faults which are not favorable for hydrocarbon preservation. The Nadu Formation, research object of this paper, is generally rich in oil and contains a large number of high-ang...
To reveal the mesoscopic fracture mechanism of fissured concrete, this study employed the discrete element method (DEM) and adopted the parallel bond model (PBM) within the two-dimensional particle flow code (PFC2D) to construct a mesoscopic model of...
The artificial frozen wall crossing the water-rich sand layer is prone to failure during thawing. To study the loading fracture characteristics and damage evolution of single-fissured sandstone after thawing, quasi-sandstones with prefabricated singl...
The existence of cracks is a key factor affecting the strength of concrete. However, traditional numerical methods still have some limitations in the simulation of crack growth in fissured concrete structures. Based on this background, the numerical...
The low-gas permeability area of a fully mechanized up-dip working face was quantitatively studied using a physical similarity simulation test and theoretical analysis under varying dip angles of rock strata. Based on the theory of fractal geometry,...
Many research results show that under any stress state the rock mass is most likely to crack, swell, bifurcate, and infiltrate from the fissure tip, resulting in rock engineering instability and failure. In order to study the influence of double fiss...
Groundwater fluctuations in bedrock affect the mechanical behavior of rock masses hosting geo-energy recovery systems utilizing borehole heat exchangers. To investigate the combined influencing mechanism of changes in groundwater saturation and fract...
The symmetrical fissures located within the surrounding rock of the roadway (borehole) in tunnel engineering activities can easily induce damage and instability of the surrounding rock. Therefore, studying the impact of perforated symmetrical fissure...
To explore the failure mechanism of rock with holes and fissures, uniaxial compression tests of sandstone samples with combined double hole and double fissure defects were carried out using Particle Flow Code 2D (PFC2D) numerical simulation software....
To address the complexity of tensile mechanical behavior in fissured rock masses, this study conducted Brazilian splitting tests and numerical simulations on yellow sandstone containing randomly distributed fissures. Based on secondary development of...
Fissures substantially impact the engineering stability of rock masses, making research on rock masses with preexisting fissures essential for engineering activities. The development of specimens with different preexisting fissure types was examined...
The interaction between train vibration load and ground fissure disasters affects the safe operation of trains. However, the interaction between the high-speed railway foundation and the train vibration in the cross-ground fissure zone is not clear....
Hydraulic concrete is prone to cracking and interactive propagation under complex stress, threatening its structural integrity and service life. To address limitations of traditional numerical methods (e.g., mesh dependency in FEM) and imprecision of...
To investigate the failure effects of critical fissures in rock specimens subjected to plane strain compression (PSC), five types of internal fissures in rock specimens were designed and twelve PSC tests were conducted for two lithologies based on th...
In urban construction, the efficient demolition of concrete structures imposes high-precision requirements on blasting technology. The mesoscopic evolution mechanism of concrete blasting damage is the key to optimizing blasting parameters. In this st...
Intersecting fissures strongly affect stress transfer and crack coalescence in rock, but their coupled effects on mechanical degradation and acoustic emission signatures remain incompletely understood. We conducted uniaxial compression tests with syn...
Fissured expansive soils were widely distributed in the South-to-North Water Transfer Project. Most of the fissures were filled with clay, which controlled the stability of the slope. With the method of layered filling—bevel cutting—refil...
With the intensifying global energy crisis, ensuring robust and reliable energy reserves has become crucial, and underground energy storage offers a safe, large-scale, and cost-effective solution. Among various options, salt cavern gas storage is rec...
The rheological properties and diffusion law of coal-based solid waste geopolymer grouting material (CGGM) slurry were investigated by rheological property test and diffusion theory model derivation. Based on the power-law fluid constitutive equation...
To address the current research gap where studies on the failure mechanisms of fissured tunnels mainly focus on single tunnels with insufficient research on double tunnels, and to provide a scientific basis for disaster prevention and control of the...
This paper aims to provide the basis of the parameters and data interpretation for some important problems, such as the identification of the type of overlying strata and the analytical calculation, where the coal mine is employed as the object of th...
The mechanical properties of frozen fissured rock masses are crucial considerations for engineering in frozen earth. However, there has been little research on the mechanical properties of frozen fissured sandstone, including its strength, deformatio...
In global cold regions and seasonal frozen soil areas, frost heave failure of rock slopes severely endangers infrastructure safety, particularly along China’s Sichuan–Tibet and Qinghai–Tibet Railways. To address this, a meshless num...
Shallow coal seam mining makes the evolution form of mining fissures in rock and soil layers diversified, which leads to the easy penetration of mining fissures as the main channel of water, sand inrush, and air leakage. In order to reveal the co-evo...
The crack propagation and failure of 3D-printed samples with prefabricated K–S fissures (a kinked fissure and a straight fissure) were observed under uniaxial compression, and the strain and displacement of the sample surface were quantified by...
Coal wall rib-spalling is regarded as a key technical problem influencing safe and efficient mining of fully mechanized working face with great mining height (FGH) while the coal wall stability is influenced by the strength of the coal body, of which...
In numerous subterranean projects, the impact of groundwater on the safety of the engineering undertaking is of paramount significance. Fractures, functioning as the primary channels for seepage within subterranean rock masses, necessitate the comple...
The medium development characteristics and controlling factors of the karst peak forest plain water system constitute the core of analyzing the complex and variable hydrogeological environment, especially in revealing the controlling factors between...
The coupled seepage–stress action has a significant deterioration effect on the structural face of the hydraulic tunnel enclosure, which intensifies the shear rupture tendency of the deteriorated structural face of the rock mass. The plastic de...
The presence of random fissures significantly alters the mechanical properties and failure mechanisms of rocks. To systematically investigate the impact of fissures on the failure behavior of sandstone, a multivariable random fissure numerical model...
In nature, rock masses often exhibit fissures, and varying external forces lead to different rates of loading on fissured rock masses. By studying the influence of the loading rate on the mechanical properties of fractured rock mass and AE characteri...
The occurrence of surface strata movement in underground coal mining leads to the generation of numerous ground fissures, which not only damage the ecological environment but also disrupt building facilities, lead to airflow and easily trigger coal s...
The mechanical properties of fissured sandstone will deteriorate under water–rock interaction. It is crucial to extract the precursor information of fissured sandstone instability under water–rock interaction. The potential of each acoust...
Cracks in rock and concrete have a great adverse effect on the stability of engineering structures; however, there are few studies on X-shaped fissures which widely exist in rock and concrete structures. Based on this background, three-point bending...
Fissures and holes widely exist in rock mechanics engineering, and, at present, their failure mechanisms under complex compress and shear stress states have not been well recognized. In our work, a fracture mark, ξ, is introduced, and the kernel func...
Existing theories leave gaps in explaining the mechanism of concrete cracking. To explain the mechanism of concrete cracking, after considering various methods, this paper finally selects the Particle Flow Code (PFC) based on the discrete element met...
In cold-region rock engineering, freeze–thaw cycle-induced crack propagation in fractured rock masses serves as a major cause of disasters such as slope instability. Existing studies primarily focus on the influence of individual fissure parame...
To investigate the dynamic mechanical properties of water-saturated fissure rock at different strain rates, prefabricated sandstone specimens with a 45° dip angle were treated with water saturation and the impact compression test was performed wi...
Fissured rock masses are widespread in deep underground mining engineering, and they are prone to inducing instability and failure during excavation activities. Borehole pressure relief is one of the most effective measures with which to control dyna...
Ground fissures are widespread around the world and are particularly severe in the North China Plain. In order to investigate the crack propagation path and propagation mode of buried ground fissures from deep strata to the surface, physical simulati...
Background and Objectives: The foramen lacerum (FL), located at the base of the skull, is generally considered the safest anatomical pathway for accessing the internal carotid artery (ICA) and the vidian canal (VC) during surgical procedures. We aime...
This study concerns the influence of chemical corrosion and geometric parameters on the macroscopic damage characteristics of brittle limestone containing a kinked fissure under uniaxial compression. The specimens are prepared in chemical solutions w...
Multiple compression tests on rock-like samples of pre-existing cracks with different geometries were conducted to investigate the strength properties and crack propagation behavior considering multi-crack interactions. The progressive failure proces...
Majority of interventional procedures are made at the porta hepatis, which has a different location on the visceral surface of the liver.
Objective. To describe the location of the porta hepatis in respect of the borders of the visceral surface and s...
In deep coal mine strata, characterized by high ground stress and extensive fracturing, predicting the strength of fractured rock masses is crucial for stability analysis of the surrounding rock in coal mine strata. In this study, rock samples were o...
Engineering rock structures containing joints and fissures are frequently subjected to discontinuous periodic disturbances of varying amplitudes. To attain the quantitative relationship between the crack angle and the mechanical and deformation prope...
During the excavation of underground projects, the rock masses left as the bearing support system are also subjected to dynamic loads from the excavation activities ahead. These rock masses have been damaged and fractured during the initial exposure...
To solve the bottleneck problem of low deep coal seam permeability and difficult coalbed methane (CBM) mining. Combining hydraulic splitting technology and directional drilling technology, a directional hydraulic splitting enhancement method of deep...
of 2