Skip to Content

454 Results Found

  • Article
  • Open Access
3,433 Views
17 Pages

19 August 2020

In this paper, the impact of material width as well as aspect ratio on deformation during diffusion bonding of layered samples were investigated. For this, six annular samples with a constant cross-sectional area but an increasing diameter and thus d...

(This article belongs to the Special Issue Diffusion Bonding of Metals)
  • Article
  • Open Access
1 Citations
1,136 Views
16 Pages

16 September 2025

Pullout bond tests using specimens with an expansion-agent-filled pipe (EAFP) simulating the cracking due to rebar corrosion were conducted to evaluate the deterioration of bond behavior when the crack width is not uniformly distributed along the lon...

(This article belongs to the Special Issue Artificial Intelligence in Materials Science and Engineering)
  • Article
  • Open Access
10 Citations
3,804 Views
19 Pages

Bonding widths of Deposited Polymer Strands in Additive Manufacturing

  • Cheng Luo,
  • Manjarik Mrinal,
  • Xiang Wang and
  • Ye Hong

11 February 2021

In this study, we explore the deformation of a polymer extrudate upon the deposition on a build platform, to determine the bonding widths between stacked strands in fused-filament fabrication. The considered polymer melt has an extremely high viscosi...

(This article belongs to the Special Issue Additive Manufacturing: Technology, Applications and Research Need)
  • Article
  • Open Access
294 Views
35 Pages

28 September 2026

Reinforced concrete subjected to restrained imposed strains exhibits a cracking response governed by the interaction between concrete tensile behaviour, reinforcement–concrete bond transfer, crack-spacing development, reinforcement stress, and...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
1,286 Views
18 Pages

29 July 2025

This research investigates resonator width optimization for simultaneously enhancing electrical performance and mechanical reliability in wideband RF MEMS filters through systematic evaluation of three configurations: 0% (L1), 60% (L2), and 100% (L3)...

(This article belongs to the Special Issue CMOS-MEMS Fabrication Technologies and Devices, 2nd Edition)
  • Article
  • Open Access
2 Citations
3,406 Views
26 Pages

7 May 2025

This study aims to verify the adaptability of a crack width evaluation method for fiber-reinforced cementitious composite (FRCC) proposed by the authors to various combinations of fiber-reinforced polymer (FRP) bars and FRCCs. As this evaluation meth...

  • Article
  • Open Access
1 Citations
2,074 Views
17 Pages

The bond–slip behavior of the steel–concrete interface is critical in reinforced concrete (RC) structures since the bond action is the mechanism that ensures the two materials work in co-operation. However, there is little research consid...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
26 Citations
3,543 Views
20 Pages

Parameter Study on Friction Surfacing of AISI316Ti Stainless Steel over EN8 Carbon Steel and Its Effect on Coating Dimensions and Bond Strength

  • George S. N. Rethnam,
  • Subramanian Manivel,
  • Vijay K. Sharma,
  • Chidurala Srinivas and ,
  • Asif Afzal,
  • Abdul Razak R.K.,
  • Sagr Alamri and
  • C. Ahamed Saleel
  • + 3 authors+ 0 author

31 August 2021

Friction surfacing is a solid-state coating process that uses plastic deformation to improve the efficiency of the core metallic pattern, resulting in fine-grained coatings with superior wear and corrosion properties. This article focuses on the deve...

(This article belongs to the Special Issue Applied Engineering Materials: Development, Characterization, Statistical Analysis, Simulation, and Soft Computing)
  • Article
  • Open Access
7 Citations
3,792 Views
16 Pages

24 September 2021

The corrosion of rebars in reinforced concrete structures cracks the concrete, which leads to the degradation of the bond strength between the rebar and concrete. Since bond deterioration can menace structural safety, bond strength evaluation is esse...

(This article belongs to the Special Issue Assessment and Rehabilitation of Existing Reinforced Concrete Structures and Infrastructures: Methods, Techniques and New Frontiers)
  • Article
  • Open Access
8 Citations
3,401 Views
18 Pages

6 December 2023

Easy maintenance and high durability are expected in structures made with fiber-reinforced cementitious composite (FRCC) reinforced with fiber-reinforced polymer (FRP) bars. In this study, we focused on the bond and cracking characteristics of polyvi...

  • Article
  • Open Access
12 Citations
5,511 Views
20 Pages

Analytical Modeling of Crack Widths and Cracking Loads in Structural RC Members

  • David Z. Yankelevsky,
  • Yuri S. Karinski and
  • Vladimir R. Feldgun

Crack width is a major performance criterion in reinforced-concrete structures, in general, and is of utmost importance in ensuring bridge performance, in particular. A reliable theory-based method is required to assess crack widths and gain insight...

(This article belongs to the Special Issue Structural Performances of Bridges)
  • Article
  • Open Access
17 Citations
4,849 Views
19 Pages

Simulation of Crack Propagation in Reinforced Concrete Elements

  • Jonas Cramer,
  • Sara Javidmehr and
  • Martin Empelmann

15 January 2021

The crack widths in reinforced concrete structures are affected by various influencing parameters, such as the tensile strength of the concrete, which is a highly variable parameter. While safe predictions of crack widths are possible with the existi...

(This article belongs to the Special Issue Recent Advances in Testing and Modelling Reinforced Concrete Structures)
  • Article
  • Open Access
207 Views
30 Pages

23 October 2026

Imposed deformations caused by shrinkage and temperature are a major source of early-age and serviceability cracking in restrained reinforced concrete (RC) members, including tanks, water-retaining structures and containment structures. A bond–...

(This article belongs to the Section Construction and Building Materials)
  • Review
  • Open Access
8 Citations
4,587 Views
63 Pages

Magnetization Plateaus by the Field-Induced Partitioning of Spin Lattices

  • Myung-Hwan Whangbo,
  • Hyun-Joo Koo,
  • Reinhard K. Kremer and
  • Alexander N. Vasiliev

To search for a conceptual picture describing the magnetization plateau phenomenon, we surveyed the crystal structures and the spin lattices of those magnets exhibiting plateaus in their magnetization vs. magnetic field curves by probing the three qu...

  • Article
  • Open Access
32 Citations
5,344 Views
19 Pages

16 September 2020

The main objective of this study was to investigate experimentally and numerically the behavior of basalt fiber-reinforced polymer (BFRP) reinforcement exposed to a combination of ultraviolet rays, humidity, and rain. Specifically, the effects of the...

(This article belongs to the Special Issue Advances and Challenges in Utilizing Fiber-Reinforced Polymer (FRP) in Construction)
  • Review
  • Open Access
12 Citations
8,690 Views
19 Pages

Current Landscape of Micro-LED Display Industrialization

  • Yang-En Wu,
  • Chia-Hung Tsai,
  • Li-Yin Chen,
  • Fang-Chung Chen and
  • Hao-Chung Kuo

Micro-LED display technology has emerged as a significant area of interest, with numerous research teams globally approaching it from various disciplines. Concurrently, several enterprises have initiated production or plan to invest in equipment manu...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
29 Citations
5,568 Views
20 Pages

4 May 2021

As is well known, corrosion of steel reinforcement deteriorates the steel–concrete interface and causes concrete cracking, degrading significantly the bond strength. Several experimental studies have investigated the magnitude of residual bond streng...

(This article belongs to the Special Issue Corrosion Effects on Durability of RC Structures)
  • Article
  • Open Access
1 Citations
1,433 Views
17 Pages

29 September 2023

The influences of bubble defects on the bond strengths of externally bonded fiber-reinforced polymer (EB-FRP) concrete joints were investigated using numerical method in this research. Studies of the influences of increasing bubble defect areas on in...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
7 Citations
3,701 Views
16 Pages

12 January 2024

The present study aims to fill a gap in the literature on the estimation of the bond strength of fiber reinforced polymer sheets bonded to concrete, via the externally bonded reinforcement on grooves (EBROG) technique, employing the curve-fitting on...

(This article belongs to the Special Issue Characterization and Modelling of Composites, Volume III)
  • Article
  • Open Access
5 Citations
1,963 Views
16 Pages

22 November 2024

The external bonding system using CFRP composite has been extensively utilized for strengthening different structures worldwide. However, premature debonding in this strengthening technique is a critical failure that leads to the fiber not reaching i...

(This article belongs to the Section Fiber Composites)
  • Article
  • Open Access
373 Views
29 Pages

8 September 2026

Traditional brick masonry buildings in China are commonly constructed using fired clay grey bricks bonded with glutinous rice mortar, forming a unique historical masonry system with significant cultural value. During long-term service, these structur...

(This article belongs to the Special Issue Masonry and Concrete Members Strengthened with Fibre-Reinforced Composite Materials: Research Advances (2nd Edition))
  • Article
  • Open Access
4 Citations
3,269 Views
23 Pages

Bi-Linear Bond-Slip Modelling for 1-D Tension Stiffening Behavior of a RC Element

  • Yuri S. Karinski,
  • David Z. Yankelevsky and
  • Vladimir R. Feldgun

Cracking is an inherent characteristic of a reinforced-concrete (RC) element subjected to tension or bending. The crack width growth with loading depends on the rebar-concrete bond behavior. RC bridges are designed under strict requirements to ensure...

(This article belongs to the Special Issue Structural Performances of Bridges)
  • Article
  • Open Access
52 Citations
6,384 Views
25 Pages

Prediction of FRCM–Concrete Bond Strength with Machine Learning Approach

  • Aman Kumar,
  • Harish Chandra Arora,
  • Krishna Kumar,
  • Mazin Abed Mohammed and ,
  • Arnab Majumdar,
  • Achara Khamaksorn and
  • Orawit Thinnukool
  • + 2 authors+ 0 author

12 January 2022

Fibre-reinforced cement mortar (FRCM) has been widely utilised for the repair and restoration of building structures. The bond strength between FRCM and concrete typically takes precedence over the mechanical parameters. However, the bond behaviour o...

(This article belongs to the Special Issue Advances in Structural Reliability Analysis and Maintenance Management)
  • Article
  • Open Access
2 Citations
564 Views
24 Pages

To investigate the bonding performance between Northeast larch (Larix gmelinii) and carbon fiber-reinforced polymer (CFRP) as well as basalt fiber-reinforced polymer (BFRP), this paper systematically analyzes the effects of fiber-reinforced polymer (...

(This article belongs to the Special Issue Advances and Applications in Timber Structures: 2nd Edition)
  • Article
  • Open Access
4 Citations
2,086 Views
22 Pages

Interfacial Bond Behavior of Clay Brick Masonry Strengthened with CFRP

  • Zhen Lei,
  • Hui Ma,
  • Yumin Luo,
  • Enmao Wang and ,
  • Haiyan Huang and
  • Li Zhang
  • + 1 author+ 0 author

This study investigates the interfacial bond behavior of clay brick masonry strengthened with carbon fiber-reinforced polymer (CFRP) through single-side shear tests. Two specimen types (single bricks and masonry prisms) were tested under varying para...

(This article belongs to the Special Issue Low-Carbon and Green Materials in Construction—2nd Edition)
  • Article
  • Open Access
2,213 Views
25 Pages

14 January 2025

To predict the mid-span deflection and crack width of reinforced ultra-high-performance concrete (R-UHPC) shallow T-shaped beams, a simplified analysis model comprising a bilinear curve with several characterization points is proposed in this paper....

(This article belongs to the Special Issue Research on Structural Analysis and Design of Civil Structures)
  • Article
  • Open Access
1 Citations
985 Views
14 Pages

14 October 2025

In this paper, we study the line-shape (LS), which indicates the amount of absorbed energy, and the line-width (LW), which indicates the scattering factor, according to the vibrational direction of the externally applied energy in the electron–...

(This article belongs to the Special Issue Feature Papers in Materials Physics (2nd Edition))
  • Article
  • Open Access
20 Citations
6,012 Views
14 Pages

26 February 2018

The objective of this paper was to explore the bond–slip relationship between carbon fiber-reinforced polymer (CFRP) sheets and concrete under cyclic loading through experimental and analytical approaches. Modified beam tests were performed in order...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers)
  • Article
  • Open Access
13 Citations
3,827 Views
14 Pages

26 January 2022

The composite material textile reinforced concrete (TRC) requires a high bond performance between the fiber strand and the concrete matrix. While the influence of the textile on bond behavior is well known, in this publication the influence of the co...

(This article belongs to the Special Issue Structural Reinforced Polymer Composites)
  • Article
  • Open Access
14 Citations
3,111 Views
16 Pages

Numerical Study of the Bond Strength Evolution of Corroded Reinforcement in Concrete in Pull-Out Tests

  • Eliass El Alami,
  • Fatima-Ezzahra Fekak,
  • Luigi Garibaldi,
  • Hassane Moustabchir and ,
  • Ahmed Elkhalfi,
  • Maria Luminita Scutaru and
  • Sorin Vlase
  • + 2 authors+ 0 author

10 January 2022

The corrosion of rebars in reinforced concrete structures impacts their geometry (diameter and ribs) and mass, damages the concrete at the interface between the two materials, deteriorates the bond strength, and causes the cracking of the concrete co...

  • Article
  • Open Access
51 Citations
6,112 Views
14 Pages

4 October 2020

The current experimental study consists of part of an extensive and ongoing research on bond behavior of RC elements damaged by corrosion, focusing on stirrups spacing effect on bonding. For this, RC specimens with different cases of stirrups spacing...

(This article belongs to the Special Issue Corrosion Effects on Durability of RC Structures)
  • Article
  • Open Access
21 Citations
3,861 Views
23 Pages

Effect of Different Bond Parameters on the Mechanical Properties of FRP and Concrete Interface

  • Comfort Mensah,
  • Zhenqing Wang,
  • Alex Osei Bonsu and
  • Wenyan Liang

24 October 2020

This paper presents double shear tests performed to investigate factors influencing the bond behavior between basalt fiber-reinforced polymer (BFRP), glass fiber-reinforced polymer (GFRP) laminate, and concrete blocks. In detail, thirty-six twin conc...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
13 Citations
4,112 Views
17 Pages

24 February 2020

The paper reports the results on first-principles investigation of energy band spectrum and optical properties of bulk and nanoporous silicon. We present the evolution of energy band-gap, refractive indices and extinction coefficients going from the...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
2 Citations
1,571 Views
18 Pages

Prediction of FRP–Concrete Bond Strength Using a Genetic Neural Network Algorithm

  • Yi Yang,
  • Tan-Tan Zhu,
  • Wu-Er Ha,
  • Xin Zhao and ,
  • Hong Qiu,
  • Xiao-Lei Liu,
  • Rui-Gang Ma,
  • Jun-Nian Li,
  • Jun Tao and
  • Fei Zhang
  • + 5 authors+ 0 author

19 August 2025

The bond strength at the interface between fiber-reinforced polymer (FRP) composites and concrete is a critical factor affecting the mechanical performance of strengthened structures. To investigate this behavior, a comprehensive database of 1032 sin...

(This article belongs to the Special Issue High-Performance Concrete: Modification Methods, Sustainability, and Multifunctional Applications—2nd Edition)
  • Article
  • Open Access
1 Citations
3,821 Views
11 Pages

Transient liquid phase diffusion bonding of an aluminum metal matrix composite with 15 wt.% Mg2Si reinforcement particles using Cu powder interlayer at 560 °C for different bonding times has been studied. Three different zones were identified at...

  • Article
  • Open Access
44 Citations
6,757 Views
13 Pages

Characteristics of an Implantable Blood Pressure Sensor Packaged by Ultrafast Laser Microwelding

  • Sungil Kim,
  • Jaesoon Park,
  • Sangkyun So,
  • Sanghoon Ahn and ,
  • Jiyeon Choi,
  • Chiwan Koo and
  • Yeun-Ho Joung
  • + 2 authors+ 0 author

15 April 2019

We propose a new packaging process for an implantable blood pressure sensor using ultrafast laser micro-welding. The sensor is a membrane type, passive device that uses the change in the capacitance caused by the membrane deformation due to applied p...

(This article belongs to the Special Issue Wearable and Implantable Sensors and Electronics Circuits)
  • Article
  • Open Access
21 Citations
10,204 Views
15 Pages

10 December 2016

The objective of the research presented here is the investigation of ultrasonic guided wave (UGW) propagation through the lap joint welded plates used in the construction of a storage tank floors. The investigations have been performed using numerica...

(This article belongs to the Special Issue Non-Destructive Metallic Materials Testing—Recent Research and Future Perspectives)
  • Article
  • Open Access
4 Citations
2,698 Views
25 Pages

Numerical and Analytical Investigations of the Impact Resistance of Partially Precast Concrete Beams Strengthened with Bonded Steel Plates

  • Xueyuan Yan,
  • Cihang Lin,
  • Xuhong Liu,
  • Tianxiao Zheng and ,
  • Shen Shi and
  • Huimin Mao
  • + 1 author+ 0 author

A building may be subjected to a variety of accidental loads during its service life. Partially precast concrete (PC) beams are a primary structural component. Their impact resistance can have a substantial impact on the overall safety of a structure...

(This article belongs to the Special Issue Recent Advance in Steel and Composite Structures)
  • Concept Paper
  • Open Access
68 Citations
10,342 Views
19 Pages

20 January 2014

The crack self-healing behavior of high-performance steel-fiber reinforced cement composites (HPSFRCs) was investigated. High-strength deformed steel fibers were employed in a high strength mortar with very fine silica sand to decreasing the crack wi...

(This article belongs to the Special Issue Self-healing Concrete)
  • Article
  • Open Access
4 Citations
11,718 Views
13 Pages

4 April 2014

The aim of this study was to evaluate the interfacial microgaps generating between different materials and between materials and dentin after polymerization of the composite restorations, using SEM. Methods: The materials investigated were a composit...

  • Article
  • Open Access
4 Citations
2,032 Views
15 Pages

12 January 2024

To study the normal section crack resistance of pre-stressed steel-reinforced concrete simply supported composite beams, the specific parameters such as the component steel content, the reinforcement ratio of non-pre-stressed and pre-stressed bars, a...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
4 Citations
3,568 Views
13 Pages

23 October 2020

Continuously reinforced concrete pavement (CRCP) is a pavement structure with a high performance and long service life. However, the corrosion of the longitudinal steel can result in a poor bond relationship between the steel and the concrete, affect...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
5 Citations
2,156 Views
14 Pages

Predicting and Improving Interlaminar Bonding Uniformity during the Robotic Fiber Steering Process

  • Pan Zhao,
  • Bijan Shirinzadeh,
  • Xiaodong He,
  • Jian Guo and ,
  • Kaining Shi,
  • Biyao Qiang,
  • Qichao Jin and
  • Fengping Li
  • + 3 authors+ 0 author

21 December 2022

With their high specific stiffness, corrosion resistance and other characteristics, especially their outstanding performance in product weight loss, fiber-reinforced resin matrix composites are widely used in the aviation, shipbuilding and automotive...

  • Article
  • Open Access
479 Views
18 Pages

3 August 2026

Mesoporous silica materials have important application prospects in the field of radioactive Cs+ adsorption and separation due to their ordered channel structures and high specific surface area. Understanding the microscopic adsorption and diffusion...

(This article belongs to the Special Issue Modern Silica- or Carbon-Based Hybrid Micro-Mesoporous Materials—Synthesis and Applications)
  • Article
  • Open Access
22 Citations
3,721 Views
17 Pages

Influence of Preheating Temperature on the Microstructure and Mechanical Properties of 6061/TA1 Composite Plates Fabricated by AFSD

  • Wei Gong,
  • Yidi Li,
  • Ming Zhang,
  • Hui Wang and ,
  • Qinglin Liu,
  • Ziming Zeng,
  • Kuo Ma,
  • Biaobiao Yang,
  • Ruilin Lai and
  • Yunping Li
  • + 5 authors+ 0 author

1 September 2023

In this study, composite plates of 6061/TA1 were successfully manufactured using additive friction stir deposition (AFSD). The impact of preheating temperatures (room temperature, 100 °C, 200 °C) on the interfacial microstructure and interfac...

(This article belongs to the Special Issue Mechanical and Microstructural Behaviour of Heterogeneous Metallic Materials)
  • Article
  • Open Access
1 Citations
1,694 Views
22 Pages

Numerical Analysis and Theoretical Study on the Interfacial Bonding Behavior of High-Strength Steel Stainless Wire Mesh-Reinforced ECC and Concrete

  • Chao Li,
  • Yao Zou,
  • Ziyuan Li,
  • Xuyan Zou and ,
  • Ke Li,
  • Juntao Zhu,
  • Hongbo Xiao and
  • Jianwei Fan
  • + 3 authors+ 0 author

3 December 2024

In order to investigate the interfacial bonding properties of high-strength steel stainless wire mesh-reinforced ECC (HSSWM-ECC) and concrete, a finite element model was established for two types of interfaces based on experimental research. The resu...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
12 Citations
3,969 Views
11 Pages

Microstructure and Mechanical Properties of Diffusion-Bonded CoCrNi-Based Medium-Entropy Alloy to DD5 Single-Crystal Superalloy Joint

  • Shiwei Li,
  • Xianjun Sun,
  • Yajie Du,
  • Yu Peng and ,
  • Yipeng Chen,
  • Zhaoxi Li,
  • Jiangtao Xiong and
  • Jinglong Li
  • + 3 authors+ 0 author

16 September 2021

This study focuses on the diffusion bonding of a CoCrNi-based medium-entropy alloy (MEA) to a DD5 single-crystal superalloy. The microstructure and mechanical properties of the joint diffusion-bonded at variable bonding temperatures were investigated...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
13 Citations
3,388 Views
27 Pages

25 July 2022

Shale oil reservoirs are characterized by having various types of vertical sublayers, a large contrast in rock mechanical properties, well-developed bedding, and high clay content, which are likely to cause rock elastic–plastic deformation. In...

(This article belongs to the Special Issue Petroleum Engineering: Reservoir Fracturing Technology and Numerical Simulation)
  • Article
  • Open Access
15 Citations
2,732 Views
11 Pages

1 June 2023

The fractured granite reservoir is well developed in Yongle block, which leads to severe drilling fluid loss-circulation. To solve the technical problem of both plugging and reservoir protection, on the basis of comprehensive literature research and...

(This article belongs to the Special Issue Geological and Engineering Problems in the Development of Unconventional Oil and Gas Reservoirs)
  • Article
  • Open Access
1,146 Views
20 Pages

12 May 2025

In order to enhance the durability of concrete frame beams, a U-shaped engineered cementitious composites (ECC) protective layer is applied at the end of the frame beams. The bond between the ECC protective layer and the concrete is reinforced by inc...

of 10