Skip to Content

2,244 Results Found

  • Article
  • Open Access
6 Citations
2,147 Views
18 Pages

Impact of Beam Shape and Frequency on Weld Seam Geometry and Penetration Depth Using a Coherent Beam Combining Laser

  • Karthik Ravi Krishna Murthy,
  • Reza Sanei,
  • Abhay Sharma,
  • Simon Olschok and
  • Uwe Reisgen

28 August 2025

The geometry and quality of a weld seam are critical factors in laser beam welding, influencing mechanical performance and structural integrity. Dynamically modulated laser beams provide a precise means of tailoring energy input in high-power laser w...

(This article belongs to the Special Issue Advanced Welding Technology and Its Applications)
  • Article
  • Open Access
4 Citations
2,890 Views
13 Pages

16 December 2022

The preponderance of laser beam shapes cannot be ruled out during the implementation of an optical experiment nor during the formulation of its theoretical background. The present work elucidates the role of Gaussian and top-hat beam shapes in genera...

(This article belongs to the Special Issue Adaptive Optics and Its Applications)
  • Article
  • Open Access
17 Citations
5,407 Views
14 Pages

Effects of Beam Shape on the Microstructures and Mechanical Properties during Thin-Foil Laser Welding

  • Danbi Song,
  • Ryoonhan Kim,
  • Kwangdeok Choi,
  • Dongsig Shin and
  • Sujin Lee

8 May 2023

In this study, a fiber laser at a wavelength of 1070 nm with different beam shapes (spot, dough-nut, and spot-wobble) was used to weld thin 316 L stainless steel foils. The welding speed was varied from 400 to 1000 mm/s in the absence of shielding ga...

(This article belongs to the Special Issue Additive Technologies, Advanced Joining Technology and Study of Weld Joints)
  • Article
  • Open Access
3 Citations
1,956 Views
17 Pages

30 April 2025

Due to its narrow divergence, optical wireless power transmission (OWPT) is promising for long-distance transmission systems. In OWPT systems, matching the beam shape with the solar cell geometry is crucial for both efficiency and safety. When the li...

(This article belongs to the Special Issue Energy, Electrical and Power Engineering: 4th Edition)
  • Article
  • Open Access
3 Citations
4,857 Views
21 Pages

Influence of the Cross-Sectional Shape of a Reinforced Bimodular Beam on the Stress-Strain State in a Transverse Impact

  • Alexey Beskopylny,
  • Elena Kadomtseva,
  • Besarion Meskhi,
  • Grigory Strelnikov and
  • Oleg Polushkin

18 December 2020

The paper considers the stress-strain state of a reinforced concrete beam, as a bimodular material, under the action of an impact. The behavior of bimodular concretes with different moduli of elasticity in tension and compression has not been studied...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
10 Citations
2,892 Views
13 Pages

18 July 2021

The remarkable properties of shape memory alloys (SMA) are attracting significant technological interest in many fields of science and engineering. In this paper, a nonlinear dynamic analytical model is developed for a laminated beam with a shape mem...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
24 Citations
4,787 Views
15 Pages

2 March 2020

To reveal the nonlinear mechanism of the tri-stable piezoelectric vibration energy harvester based on composite shape beam (TPEH-C) and its influence on the system response, the nonlinear restoring force and the nonlinear magnetic force are discussed...

(This article belongs to the Special Issue Energy Harvesting Sensors)
  • Article
  • Open Access
21 Citations
9,044 Views
10 Pages

Evaluation of Cross-Sectional Root Canal Shape and Presentation of New Classification of Its Changes Using Cone-Beam Computed Tomography Scanning

  • Svetlana Razumova,
  • Anzhela Brago,
  • Ammar Howijieh,
  • Haydar Barakat and ,
  • Yuliya Kozlova and
  • Malina Baykulova
  • + 1 author+ 0 author

29 June 2020

The root canal system is considering the most important factor in endodontic treatment, due to the complexity of its anatomy and morphology. The aim of this study was to evaluate the cross-sectional root canal shape in three thirds (coronal, middle,...

(This article belongs to the Special Issue Innovative Techniques in Endodontics)
  • Article
  • Open Access
5 Citations
3,439 Views
17 Pages

Alternatives to Reduce Hot Cracking Susceptibility of IN718 Casting Alloy Laser Beam Welds with a Mushroom Shape

  • Leire García-Sesma,
  • Pedro Álvarez,
  • Eider Gorostegui-Colinas,
  • I. Huarte and
  • Fernando Santos

18 September 2024

Reducing hot cracking is essential for ensuring seamless production of nickel superalloys, which are extensively used in welded structures for aircraft engines. The prevalence of hot cracking in precipitation-strengthened alloy 718 is primarily gover...

  • Article
  • Open Access
34 Citations
4,946 Views
21 Pages

27 June 2023

This work presents a novel methodology for the accurate and efficient elastic deformation reconstruction of thin-walled and stiffened structures from discrete strains. It builds on the inverse finite element method (iFEM), a variationally-based shape...

(This article belongs to the Special Issue Shape Sensing 2021-2024)
  • Article
  • Open Access
30 Citations
5,328 Views
17 Pages

Basic Properties of High-Dynamic Beam Shaping with Coherent Combining of High-Power Laser Beams for Materials Processing

  • Rudolf Weber,
  • Jonas Wagner,
  • Alexander Peter,
  • Christian Hagenlocher and ,
  • Ami Spira,
  • Benayahu Urbach,
  • Eyal Shekel and
  • Yaniv Vidne
  • + 3 authors+ 0 author

Lasers with average powers of several kilowatts have become an important tool for industrial applications. Temporal and spatial beam shaping was demonstrated to improve existing and enable novel applications. A very promising technology for both high...

  • Article
  • Open Access
241 Views
20 Pages

Finite Element Study of Shape Memory Alloy Butterfly Spring Tie Beam Joints in Double-Column Piers

  • Zhaolan Wei,
  • Ziteng Ma,
  • Jiangchuan Zhang,
  • Shaomin Jia and ,
  • Hang Zhou,
  • Yuzhi Huang and
  • Yulin Feng
  • + 2 authors+ 0 author

16 September 2026

This paper proposes a repair-oriented steel tie beam joint with shape memory alloy (SMA) butterfly springs for double-column piers. In the proposed detail, the conventional welded connection is replaced by a bolted fuse region to redirect inelastic d...

(This article belongs to the Section Building Structures)
  • Review
  • Open Access
2 Citations
1,927 Views
41 Pages

18 May 2026

The increasing demand for reliable and high-performance electric vehicle (EV) batteries requires precise and defect-free welding of battery components. Conventional Gaussian laser beam welding faces challenges such as keyhole instability, spattering,...

  • Article
  • Open Access
5 Citations
2,782 Views
9 Pages

Comparison of L-Shaped and U-Shaped Beams in Bidirectional Piezoelectric Vibration Energy Harvesting

  • Weile Jiang,
  • Lu Wang,
  • Xinquan Wang,
  • Libo Zhao and ,
  • Xudong Fang and
  • Ryutaro Maeda
  • + 1 author+ 0 author

23 October 2022

The traditional single degree of freedom linear piezoelectric vibration energy harvester (PVEH), such as the cantilever type, mainly works and resonates in a single direction and at a single frequency. To adapt broadband and bidirectional ambient vib...

(This article belongs to the Special Issue Advanced Nanomaterials and Nanotechnology for Green Energy Harvesting, Storage, and Application)
  • Article
  • Open Access
2 Citations
1,606 Views
19 Pages

Guide to a Deterministic Control of Laser Materials Processing with Dynamic Beam Shaping

  • Rudolf Weber,
  • Thomas Graf,
  • Kim Glumann,
  • Christian Hagenlocher and ,
  • Ami Spira,
  • Nina Armon,
  • Ehud Greenberg,
  • Rachel Assa and
  • Eyal Shekel
  • + 4 authors+ 0 author

Dynamic beam shaping opens new possibilities for improving the quality and productivity of industrial laser material processing applications such as welding and cutting. However, dynamic beam shaping involves time constants and frequencies that must...

  • Article
  • Open Access
2 Citations
3,007 Views
15 Pages

Fusion of Ni Plating on CP-Titanium by Electron Beam Single-Track Scanning: Toward a New Approach for Fabricating TiNi Self-Healing Shape Memory Coating

  • Lei Wang,
  • Masayuki Okugawa,
  • Hirokazu Konishi,
  • Yuheng Liu and ,
  • Yuichiro Koizumi and
  • Takayoshi Nakano
  • + 1 author+ 0 author

3 August 2023

The limited wear resistance of commercially pure titanium (CP-Ti) hinders its use in abrasive and erosive environments, despite its good strength–weight ratio and corrosion resistance. This paper reports the first study proposing a novel method...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
138 Views
26 Pages

Experimental Study on the Seismic Performance of Exterior RC Beam-Column Joints with U-Shaped Steel-Strengthened Beams

  • Qingli Lin,
  • Junyi Wu,
  • Chuanhao Fan,
  • Tiantian Liu and ,
  • Yanfeng Wang and
  • Wenxiang Han
  • + 1 author+ 0 author

2 November 2026

U-shaped steel strengthening can substantially enhance the mechanical performance of reinforced concrete (RC) beams while having minimal impact on their cross-sectional dimensions and self-weight. However, the influence of strengthening RC beams with...

(This article belongs to the Section Building Structures)
  • Review
  • Open Access
2 Citations
1,341 Views
29 Pages

Research Advances in U-Shaped Steel−Concrete Composite Beams: State of the Art

  • Qingli Lin,
  • Fangliang Yu,
  • Wenxiang Han,
  • Long Zhang and
  • Jinyan Wang

U-shaped steel−concrete composite beams (USCCBs) have been widely used in civil engineering due to their numerous advantages, including high load-bearing capacity, high rigidity, good ductility, short construction periods, and compatibility wit...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
776 Views
14 Pages

Shaped Beam Synthesis of Origami Reflectarray Antennas with Crease Constraints

  • Wenjing Zhang,
  • Liwei Song,
  • Zhenkun Zhang and
  • Bingxiang Zhu

14 April 2026

Creases in origami reflectarray antennas (ORAs) impose layout exclusion zones that invalidate conventional shaped beam synthesis, assuming continuous periodic apertures. A crease-compatible shaped beam synthesis approach is presented, in which crease...

(This article belongs to the Special Issue Recent Advances in Reflectarray and Transmitarray Antennas)
  • Article
  • Open Access
3 Citations
1,562 Views
11 Pages

DMD-Based Programmable Beam Shaping for Optical Potential Engineering

  • Feifan Zhao,
  • Fangde Liu,
  • Yunda Li,
  • Mingqing Yuan and ,
  • Xinjiang Yao,
  • Jiahao Wang,
  • Zhuxiong Ye,
  • Liangchao Chen,
  • Lianghui Huang and
  • Zengming Meng
  • + 7 authors+ 2 authors

Precise control of optical intensity distributions is important for beam shaping, optical trapping, and optical potential engineering. We implement a digital micromirror device (DMD)-based programmable beam-shaping platform for generating high-fideli...

(This article belongs to the Special Issue Advanced Research in Quantum Optics)
  • Article
  • Open Access
9 Citations
3,466 Views
22 Pages

27 March 2021

The purpose of the work is an experimental analysis of the behavior of reinforced concrete beams with a new, patented system of truss-shaped reinforcement. Experimental tests of reinforced concrete beams with conventional reinforcement and with truss...

(This article belongs to the Special Issue Masonry Structures and Reinforced Concrete Structures)
  • Article
  • Open Access
101 Citations
11,206 Views
18 Pages

9 December 2021

A major factor slowing down the establishment of additive manufacturing processes as production processes is insufficient reproducibility and productivity. Therefore, this work investigates the influence of ring-shaped beam profiles on process stabil...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metals)
  • Communication
  • Open Access
2 Citations
2,876 Views
9 Pages

2 March 2023

We present an approach for engineering the intensity trajectory and phase gradient of light beams with arbitrary shapes by estimating their parametric equations using Freeman chain code and by applying the fast Fourier transform. The analysis of the...

(This article belongs to the Topic Liquid Crystal Photonics)
  • Article
  • Open Access
5 Citations
3,002 Views
16 Pages

Efficient Production of Doughnut-Shaped Ce:Nd:YAG Solar Laser Beam

  • Dário Garcia,
  • Dawei Liang,
  • Joana Almeida,
  • Miguel Catela and ,
  • Hugo Costa,
  • Bruno D. Tibúrcio,
  • Emmanuel Guillot and
  • Cláudia R. Vistas
  • + 3 authors+ 0 author

15 September 2023

Laser beams with a doughnut-shaped profile have garnered much attention for their contribution to trapping nanoparticles and improving the scanning speed during laser-based 3D metal printing. For this reason, the production of a doughnut-shaped solar...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
11 Citations
3,651 Views
17 Pages

30 September 2021

In order to investigate the transverse flexural behavior of the UHPC waffle deck, a total of six T-shaped UHPC beams, with varying longitudinal reinforcement ratios, were tested and analyzed. The experiments, including material tests of UHPC and beam...

(This article belongs to the Topic Fiber-Reinforced Cementitious Composites)
  • Article
  • Open Access
12 Citations
2,758 Views
18 Pages

Nonlinear Dynamic Modeling and Analysis of an L-Shaped Multi-Beam Jointed Structure with Tip Mass

  • Jin Wei,
  • Tao Yu,
  • Dongping Jin,
  • Mei Liu and ,
  • Dengqing Cao and
  • Jinjie Wang
  • + 1 author+ 0 author

28 November 2021

A dynamic model of an L-shaped multi-beam joint structure is presented to investigate the nonlinear dynamic behavior of the system. Firstly, the nonlinear partial differential equations (PDEs) of motion for the beams, the governing equations of the t...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
20 Citations
4,408 Views
25 Pages

Experimental Study on the Overall Stability of Corroded H-Shaped Steel Beams

  • Lisheng Luo,
  • Houlin Fu,
  • Yongqiang Zhang and
  • Xinran Xie

8 November 2022

The degradation of the overall stability of corroded rolled H-shaped steel beams under bending conditions has not been extensively studied. In the present study, monotonic tensile tests and overall stability tests were conducted on seven rolled H-sha...

(This article belongs to the Special Issue Advances in Steel Structures: Testing, Modelling and Design)
  • Article
  • Open Access
1 Citations
3,190 Views
8 Pages

17 August 2021

Optical wireless charging is a nonradiative long-distance power transfer method. It may potentially play an important role in certain scenarios where access is challenging, and the radio frequency power transfer is less efficient. The divergence of t...

(This article belongs to the Special Issue Liquid Crystal Optics for Applications)
  • Article
  • Open Access
2 Citations
2,743 Views
14 Pages

23 February 2024

In recent years, laser technology has made significant advancements, yet there are specific requirements for the energy concentration and uniformity of lasers in various fields, such as optical communication, laser processing, 3D printing, etc. Beam...

  • Review
  • Open Access
25 Citations
5,974 Views
19 Pages

4 December 2024

Ultrafast or ultrashort pulsed lasers have become integral in numerous industrial applications due to their high precision, non-thermal interaction with materials, and ability to induce nonlinear absorption. These characteristics have expanded their...

(This article belongs to the Section Lasers, Light Sources and Sensors)
  • Article
  • Open Access
5 Citations
2,205 Views
18 Pages

Hysteretic Behavior Study on the RBS Connection of H-Shape Columns with Middle-Flanges or Wide-Flange H-Shape Beams

  • Saleem Mohammed Ali Ahmed Al-Saeedi,
  • Linfeng Lu,
  • Osama Zaid Yahya Al-Ansi and
  • Saddam Ali

6 January 2025

Existing research on reduced beam section (RBS) connections in steel frames rarely addresses H-shaped beams with middle and wide flanges. Therefore, this study investigates the hysteretic behavior of RBS connections in H-shaped columns connected to H...

(This article belongs to the Special Issue Advanced Studies on Steel Structures)
  • Article
  • Open Access
42 Citations
17,906 Views
11 Pages

27 October 2014

Thin film ablation with pulsed nanosecond lasers can benefit from the use of beam shaping optics to transform the Gaussian beam profile with a circular footprint into a Top-Hat beam profile with a rectangular footprint. In general, the quality of the...

(This article belongs to the Special Issue Laser Micro- and Nano- Processing)
  • Article
  • Open Access
9 Citations
5,348 Views
24 Pages

13 August 2018

To reuse waste concrete in a more straightforward and simplified way, a new kind of structural member containing fresh concrete (FC) and demolished concrete lumps (DCLs) distinctly larger than conventional recycled aggregates has been proposed. Previ...

(This article belongs to the Special Issue Emerging Construction Materials and Sustainable Infrastructure)
  • Article
  • Open Access
23 Citations
6,253 Views
12 Pages

24 March 2020

A three-axis accelerometer with a double L-shaped beams structure was designed and fabricated in this paper, consisting of a supporting body, four double L-shaped beams and intermediate double beams connected to two mass blocks. When applying acceler...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
8 Citations
2,501 Views
18 Pages

An Investigation on the Seismic Behavior of the End-Plate Connection between a Steel Beam and the Weak-Axis of an H-Shaped Column Using a U-Shaped Connector

  • Shaofeng Nie,
  • Siyuan Chen,
  • Weijie Wu,
  • Xin Jiang and ,
  • Shuo Wang,
  • Yongzhen Lin and
  • Mengxue Liu
  • + 2 authors+ 0 author

13 April 2024

The seismic behavior of the end-plate connections between a steel beam and the weak axis of the H-shaped steel column using a U-shaped connector was investigated using numerical analysis. Finite element (FE) models were established using ABAQUS 6.14...

(This article belongs to the Special Issue Research on the Seismic Design of Steel Frames)
  • Article
  • Open Access
89 Views
12 Pages

Reflective and Transmissive Off-Axis Sub-THz Beam Shaping Using Passive Complementary Split-Ring Resonators

  • Ernestas Nacius,
  • Vladislovas Čižas,
  • Kasparas Stanaitis,
  • Ignas Grigelionis and
  • Linas Minkevičius

6 November 2026

Terahertz and sub-terahertz links offer wide bandwidths for future wireless communication, but practical deployment is limited by high propagation loss, atmospheric absorption, and sensitivity to blockage in non-line-of-sight environments. Here, we d...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
11 Citations
3,821 Views
25 Pages

29 May 2022

The use of corrugated webs in steel beams has become one of the most practical ways to increase the efficiency of beams in resisting loads, natural frequencies, and their resulting displacements. Such a practice has the benefit of achieving the same...

(This article belongs to the Topic Processing, Analysis, Modelling and Mechanics of Materials and Structures)
  • Article
  • Open Access
3 Citations
3,842 Views
15 Pages

2 February 2023

The existing literature mainly focuses on the research of reinforced concrete (RC) beams under a single load such as blast or impact. In this paper, the slab–rib–slab RC beam, a new type of structure widely used in bridge structures, was...

(This article belongs to the Topic Dynamical Systems: Theory and Applications)
  • Article
  • Open Access
2 Citations
2,233 Views
10 Pages

Influence of Lithography Process Parameters on Continuous Surface Diffractive Optical Elements for Laser Beam Shaping

  • Wenjing Liu,
  • Axiu Cao,
  • Junbo Liu,
  • Hui Pang and ,
  • Qiling Deng,
  • Jian Wang and
  • Song Hu
  • + 2 authors+ 0 author

To address the demand for laser beam-shaping techniques, we developed a one-step exposure process based on moving-mask lithography for the fabrication of a continuous-surface diffractive optical element (DOE) for laser beam shaping. The fabrication p...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
38 Citations
6,920 Views
16 Pages

Application of Inverse Finite Element Method to Shape Sensing of Curved Beams

  • Pierclaudio Savino,
  • Francesco Tondolo,
  • Marco Gherlone and
  • Alexander Tessler

8 December 2020

Curved beam, plate, and shell finite elements are commonly used in the finite element modeling of a wide range of civil and mechanical engineering structures. In civil engineering, curved elements are used to model tunnels, arch bridges, pipelines, a...

(This article belongs to the Special Issue Shape Sensing)
  • Article
  • Open Access
6 Citations
3,361 Views
11 Pages

7 February 2024

Near-field bending of a laser diode bar (i.e., the SMILE effect) degrades the laser beam brightness, adversely affecting optical coupling and beam shaping. Previous reports mainly focused on the two-dimensional near-field bending of a laser diode bar...

(This article belongs to the Special Issue Laser Beam Propagation and Control)
  • Article
  • Open Access
13 Citations
4,242 Views
15 Pages

A Novel Gold Film-Coated V-Shape Dual-Core Photonic Crystal Fiber Polarization Beam Splitter Covering the E + S + C + L + U Band

  • Yuwei Qu,
  • Jinhui Yuan,
  • Shi Qiu,
  • Xian Zhou and ,
  • Feng Li,
  • Binbin Yan,
  • Qiang Wu,
  • Kuiru Wang,
  • Xinzhu Sang and
  • Chongxiu Yu
  • + 6 authors+ 1 author

12 January 2021

In this paper, a novel gold film-coated V-shape dual-core photonic crystal fiber (V-DC-PCF) polarization beam splitter (PBS) based on surface plasmon resonance effect is proposed. The coupling lengths of the X-polarization (X-pol) and Y-polarization...

(This article belongs to the Special Issue Advanced Fiber Photonic Devices and Sensors)
  • Article
  • Open Access
18 Citations
3,972 Views
21 Pages

Concrete-filled steel tubular (CFST) members have been widely used in industrial structures and high-rise residential buildings. The multi-cell composite L-shaped concrete-filled steel tubular (ML-CFST) cross-section, as an innovative, special-shaped...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
67 Citations
7,447 Views
21 Pages

Development of Hybrid Machine Learning Models for Predicting the Critical Buckling Load of I-Shaped Cellular Beams

  • Hai-Bang Ly,
  • Tien-Thinh Le,
  • Lu Minh Le,
  • Van Quan Tran and ,
  • Vuong Minh Le,
  • Huong-Lan Thi Vu,
  • Quang Hung Nguyen and
  • Binh Thai Pham
  • + 3 authors+ 0 author

12 December 2019

The principal purpose of this work is to develop three hybrid machine learning (ML) algorithms, namely ANFIS-RCSA, ANFIS-CA, and ANFIS-SFLA which are a combination of adaptive neuro-fuzzy inference system (ANFIS) with metaheuristic optimization techn...

(This article belongs to the Special Issue Meta-heuristic Algorithms in Engineering)
  • Article
  • Open Access
547 Views
14 Pages

A Focusing Diffractive Optical Element for Flat-Top Beam Shaping Resilient to Etching Depth Errors

  • Xiaohua Zeng,
  • Hui Pang,
  • Cheng Xu,
  • Axiu Cao and ,
  • Yongqi Fu and
  • Qiling Deng
  • + 1 author+ 0 author

14 August 2026

Diffractive optical elements (DOEs) have become core components for converting Gaussian beams into flat-top beams due to their advantages of flexible design, compact size, and precise control over light field distribution. However, during the fabrica...

(This article belongs to the Special Issue Diffractive Optics and Its Emerging Applications)
  • Communication
  • Open Access
9 Citations
3,877 Views
10 Pages

Extending the Imaging Depth of Field through Scattering Media by Wavefront Shaping of Non-Diffraction Beams

  • Tongyu Han,
  • Tong Peng,
  • Runze Li,
  • Kaige Wang and ,
  • Dan Sun and
  • Baoli Yao
  • + 1 author+ 0 author

Increasing the depth of field (DOF) is a crucial issue for imaging through scattering media. In this paper, an improved genetic algorithm is used to modulate the wavefront of light through scattering media, by which high-quality refocusing and imagin...

(This article belongs to the Special Issue Technologies and Applications of Biophotonics)
  • Article
  • Open Access
4 Citations
4,549 Views
22 Pages

Behavior of Concrete-Filled U-Shaped Steel Beam to CFSST Column Connections

  • Yan Lin,
  • Zhijie Zhao,
  • Xuhui Gao,
  • Zhen Wang and
  • Shuang Qu

14 February 2023

Two new types of connection between concrete-filled U-shaped steel (CFUS) beams and concrete-filled square steel tube (CFSST) columns were presented in this study, including rebar-sleeve with internal diaphragm connection and rebar-through with inter...

(This article belongs to the Special Issue Prefabricated and Modular Steel Structures)
  • Article
  • Open Access
1 Citations
1,543 Views
16 Pages

Ultrathin Microlens Arrays for Dynamic Beam Shaping Based on 3D Lithography

  • Ruiqi Cheng,
  • Yue Zhang,
  • Shuo Chen,
  • Yu Shu and ,
  • Hao Cao and
  • Chengqun Gui
  • + 1 author+ 0 author

16 February 2026

Conventional microlens arrays (MLAs) are often constrained by their static focal properties, which limit post-fabrication adaptability in dynamic optical systems. To address this, we demonstrate a tunable beam shaper capable of real-time spot-size mo...

(This article belongs to the Special Issue Recent Advances in Micro/Nanofabrication, 3rd Edition)
  • Article
  • Open Access
4 Citations
2,914 Views
19 Pages

Investigations on Nonlinear Dynamic Modeling and Vibration Responses of T-Shaped Beam Structures

  • Shuai Chen,
  • Dengqing Cao,
  • Jin Wei,
  • Guiqin He and ,
  • Bo Fang and
  • Youxia Li
  • + 1 author+ 0 author

12 October 2022

A novel nonlinear dynamic modeling approach is proposed for the T-shaped beam structures widely used in the field of aerospace. All of the geometrical nonlinearities including the terms in the deformation of the beams, the terms at the connections, a...

(This article belongs to the Special Issue Advanced Spacecraft Structural Dynamics and Actuation Control)
  • Article
  • Open Access
1 Citations
1,088 Views
36 Pages

Experimental and Numerical Investigations on Shear Performance of Large-Scale Stirrup-Free I-Shaped UHPC Beams

  • Shengze Wu,
  • Chengan Zhou,
  • Fan Mo,
  • Lifeng Zhang and ,
  • Haibo Jiang,
  • Yueqiang Tian and
  • Junfa Fang
  • + 2 authors+ 0 author

1 September 2025

Ultra-High-Performance Concrete (UHPC) is a game-changing, innovative material with the merits of exceptional tensile strength, making it suitable for stirrup-free UHPC beams. In this study, two 4.0 m-long large-scale stirrup-free I-shaped UHPC beams...

(This article belongs to the Section Building Structures)

of 45