Skip to Content
You are currently on the new version of our website. Access the old version .

14,633 Results Found

  • Article
  • Open Access
10 Citations
6,653 Views
13 Pages

22 June 2018

An in situ scanning electron microscope (SEM) study was conducted on a super duplex stainless steel (SDSS) containing 0%, 5% and 10% σ-phase. The material was heat treated at 850 °C for 12 min and 15 min, respectively, to achieve the differ...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Structural Metals and Alloys)
  • Article
  • Open Access
14 Citations
3,517 Views
8 Pages

Evaluation of Mechanical Properties of a Hollow Endodontic Post by Three Point Test and SEM Analysis: A Pilot Study

  • Giuseppe Lo Giudice,
  • Edoardo Ferrari Cagidiaco,
  • Roberto Lo Giudice,
  • Francesco Puleio and ,
  • Fabiana Nicita and
  • Massimo Calapaj
  • + 1 author+ 0 author

20 June 2019

The aim of this study was to investigate the mechanical properties of a fiber hollow endodontic post characterized by the presence of an empty central cylindrical channel extended along the whole length. This particular shape allows clinicians to use...

(This article belongs to the Special Issue Current and Future Trends in Dental Materials)
  • Article
  • Open Access
8 Citations
4,661 Views
12 Pages

Crack Propagation Behavior of a Ni-Based Single-Crystal Superalloy during In Situ SEM Tensile Test at 1000 °C

  • Wenxiang Jiang,
  • Xiaoyi Ren,
  • Jinghao Zhao,
  • Jianli Zhou and ,
  • Jinyao Ma,
  • Wenjing Zhang,
  • Yuefei Zhang and
  • Ze Zhang
  • + 3 authors+ 0 author

17 November 2020

An in situ scanning electron microscope (SEM) tensile test for Ni-based single-crystal superalloy was carried out at 1000 °C. The stress displacement was obtained, and the yield strength and tensile strength of the superalloy were 699 MPa and 826...

(This article belongs to the Special Issue Microstructural and Mechanical Characterization of Alloys Volume II)
  • Article
  • Open Access
7 Citations
5,416 Views
12 Pages

The Validation of the Defensive Reactive Agility Test in Top-Level Volleyball Male Players: A New Approach to Evaluating Slide Speed Using Witty SEM

  • Pavol Horička,
  • Ľubomír Paška,
  • Marek Popowczak,
  • Dawid Koźlenia and ,
  • Jaromír Šimonek and
  • Jarosław Domaradzki
  • + 1 author+ 0 author

23 July 2024

Aim: The aim of the study is to provide a new tool to measure the level of defensive agility objectively. Methods: The sample included 14 elite male volleyball players of the University of Nitra club (22.3 ± 5.7 years). Measurements consisted...

(This article belongs to the Special Issue New Trends in Training, Performance, Coaching and Health in Sports Science)
  • Feature Paper
  • Article
  • Open Access
16 Citations
5,553 Views
9 Pages

In Situ Macroscopic Tensile Testing in SEM and Electron Channeling Contrast Imaging: Pencil Glide Evidenced in a Bulk β-Ti21S Polycrystal

  • Meriem Ben Haj Slama,
  • Nabila Maloufi,
  • Julien Guyon,
  • Slim Bahi and ,
  • Laurent Weiss and
  • Antoine Guitton
  • + 1 author+ 0 author

4 August 2019

In this paper, we report the successful combination of macroscopic uniaxial tensile testing of bulk specimen combined with In situ dislocation-scale observations of the evolution of deformation microstructures during loading at several stress states....

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
36 Citations
8,121 Views
17 Pages

19 October 2020

The measurement of gait characteristics during a self-administered 2-minute walk test (2MWT), in persons with multiple sclerosis (PwMS), using a single body-worn device, has the potential to provide high-density longitudinal information on disease pr...

(This article belongs to the Special Issue Wearable Inertial Sensors)
  • Article
  • Open Access
6 Citations
2,268 Views
15 Pages

A Feasible Method for Evaluating the Uniformity of Remolded Loess Samples with Shear Strength

  • Wang Yao,
  • Xi’an Li,
  • Ning Zhang,
  • Yongbiao Ren and ,
  • Jianfeng Shi,
  • Chen Zhang,
  • Quan Xue and
  • Zhitao Hao
  • + 3 authors+ 0 author

5 January 2023

The precision and reliability of test findings are closely related to the uniformity of remolded loess samples. Although many methods to evaluate the uniformity of remolded loess have been proposed, they have not been widely accepted, due to the many...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
43 Citations
5,526 Views
16 Pages

Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material

  • Miroslav Müller,
  • Petr Jirků,
  • Vladimír Šleger,
  • Rajesh Kumar Mishra and ,
  • Monika Hromasová and
  • Jan Novotný
  • + 1 author+ 0 author

15 November 2022

In this paper, the fatigue behavior of polylactic acid (PLA) material with bamboo filler printed by 3D additive printing using fused deposition modelling (FDM) technology at different infill densities and print nozzle diameters is investigated. The m...

(This article belongs to the Special Issue 3D Printing and Customized Additive Manufacturing of Advanced Sustainable Polymers and Composites)
  • Article
  • Open Access
5 Citations
5,628 Views
21 Pages

Testing Consistency: Analyzing the Reliability of Two Lower Limb Isometric Force Measurements in Strength-Trained Athletes

  • Francisco Giuliano,
  • Marcos A. Soriano,
  • Victor Pino-Mulero and
  • Jaime González-García

31 December 2024

This study aimed to examine the intra- and inter-session reliability of kinetic variables in the isometric mid-thigh pull (IMTP) and isometric belt squat test (IBSqT) in strength-trained individuals. Fifteen men (26.9 ± 8.9 years; 1.78 ±...

(This article belongs to the Special Issue Athletes Performance and Analysis in Combat Sports and Martial Arts: Second Edition)
  • Communication
  • Open Access
3 Citations
1,169 Views
14 Pages

Characterization of Hard Coatings Using Acoustic Emission

  • Ivana Sára Škrobáková,
  • Peter Gogola,
  • Marián Palcut and
  • Ľubomír Čaplovič

12 August 2025

Acoustic emission (AE) testing is a non-destructive method used in various applications. In our work we demonstrate its capabilities and potential in studying the functional properties of physical vapor deposited (PVD) coatings. The goal was to class...

(This article belongs to the Special Issue Surface Engineering in Materials (2nd Edition))
  • Article
  • Open Access
3 Citations
1,599 Views
24 Pages

30 September 2025

Many transportation structures collapse or sustain severe damage as a result of natural disasters such as earthquakes, floods, wars, and similar attacks. These collapsed or severely damaged structures must be rebuilt and returned to service as quickl...

(This article belongs to the Special Issue Advances in Civil Infrastructures Engineering)
  • Article
  • Open Access
8 Citations
3,189 Views
30 Pages

SEM Investigation of Failure Mechanisms in Twaron® Aramid Fibers Used for Personal Armors

  • Alina Cantaragiu Ceoromila,
  • Lorena Deleanu,
  • Christian Popescu,
  • Ionuț Lom and ,
  • Alexandru Viorel Vasiliu,
  • Petre Lucian Seiciu,
  • George Ghiocel Ojoc and
  • Simona Maria Sandu
  • + 3 authors+ 0 author

14 April 2025

This paper presents a synthesis of failures of aramid fibers used in protective systems, with the help of SEM images obtained from three types of samples (panels made of fabrics with aramid fibers) tested against bullets, knives and spikes. This inve...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
11 Citations
3,623 Views
14 Pages

Process Condition Diagram Predicting Onset of Microdefects and Fracture in Cold Bar Drawing

  • Yong-Hoon Roh,
  • Donghyuk Cho,
  • Hae-Chang Choi,
  • Zhaorui Yang and
  • Youngseog Lee

13 March 2021

This paper presents a process condition diagram (PCD) that not only identifies conditions under which materials fracture during bar drawing, but also infers the presence or absence of microdefects such as microvoids and microcracks in the drawn mater...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
25 Citations
2,776 Views
11 Pages

12 October 2022

One of the popular techniques to fabricate metal matrix composites is the compo-casting process. The un-uniform spreading of reinforced subdivisions (particles) inside the metallic matrix and the lack of desirable mechanical properties of the final p...

(This article belongs to the Special Issue Feature Papers on "Hybrid and Composite Crystalline Materials" 2021-2022)
  • Article
  • Open Access
17 Citations
3,036 Views
23 Pages

Research on Water Stability and Moisture Damage Mechanism of a Steel Slag Porous Asphalt Mixture

  • Xiaobing Chen,
  • Miao Zhang,
  • Jianming Yao,
  • Xiaofei Zhang and ,
  • Wei Wen,
  • Jinhai Yin and
  • Zhongshan Liang
  • + 2 authors+ 0 author

17 October 2023

A steel slag porous asphalt (SSPA) mixture, as the surfacing layer of permeable asphalt pavements, not only ensures the pavement surface drainage and noise reduction functions, but also improves the comprehensive utilization of steel slag resources a...

(This article belongs to the Special Issue Sustainable Road Materials and Pavement Design)
  • Article
  • Open Access
79 Citations
5,968 Views
24 Pages

1 March 2022

A large amount of coal fly ash produced in thermal power plants is disposed of in landfills which causes many environmental problems. The utilization of fly ash can be encouraged in geotechnical engineering projects. In this paper, the effects of cla...

  • Article
  • Open Access
30 Citations
7,930 Views
15 Pages

21 November 2023

Sustainability has a significant role in the reputation and status of a higher education institution. Universities have a part in “forming the values of society” through educating the present and future generations of decision makers. Uni...

(This article belongs to the Section Sustainable Education and Approaches)
  • Article
  • Open Access
70 Citations
5,444 Views
19 Pages

Low-Cycle Fatigue Behavior of 3D-Printed PLA Reinforced with Natural Filler

  • Miroslav Müller,
  • Vladimír Šleger,
  • Viktor Kolář,
  • Monika Hromasová and ,
  • Dominik Piš and
  • Rajesh Kumar Mishra
  • + 1 author+ 0 author

23 March 2022

Additive production is currently perceived as an advanced technology, where intensive research is carried out in two basic directions—modifications of existing printing materials and the evaluation of mechanical properties depending on individu...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
121 Citations
8,971 Views
16 Pages

Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes

  • Nectarios Vidakis,
  • Markos Petousis,
  • Lazaros Tzounis,
  • Sotirios A. Grammatikos and ,
  • Emmanouil Porfyrakis,
  • Athena Maniadi and
  • Nikolaos Mountakis
  • + 2 authors+ 0 author

2 March 2021

The continuous demand for thermoplastic polymers in a great variety of applications, combined with an urgent need to minimize the quantity of waste for a balanced energy-from-waste strategy, has led to increasing scientific interest in developing new...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
8 Citations
4,522 Views
21 Pages

SEM Analysis and Micro-CT Evaluation of Four Dental Implants after Three Different Mechanical Requests—In Vitro Study

  • Ana Sofia Vinhas,
  • Filomena Salazar,
  • José Manuel Mendes,
  • António Sérgio Silva and ,
  • Blanca Ríos-Carrasco,
  • José Vicente Ríos-Santos,
  • Javier Gil,
  • Mariano Herrero-Climent and
  • Carlos Aroso
  • + 4 authors+ 0 author

16 January 2024

Statement of problem: Implant-supported rehabilitations are an increasingly frequent practice to replace lost teeth. Before clinical application, all implant components should demonstrate suitable durability in laboratory studies, through fatigue tes...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
6 Citations
3,247 Views
19 Pages

6 September 2022

Previously conducted studies have established that gaseous water sorption of mudstone is widespread in nature. The deterioration of its uniaxial compression properties during gaseous water sorption can cause engineering problems. However, related stu...

(This article belongs to the Topic New Trends in Rock Materials Mechanics and Engineering Geology)
  • Article
  • Open Access
42 Citations
5,209 Views
18 Pages

On the Mechanical Response of Silicon Dioxide Nanofiller Concentration on Fused Filament Fabrication 3D Printed Isotactic Polypropylene Nanocomposites

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emmanouil Velidakis,
  • Lazaros Tzounis and ,
  • Nikolaos Mountakis,
  • Apostolos Korlos,
  • Peder Erik Fischer-Griffiths and
  • Sotirios Grammatikos
  • + 3 authors+ 0 author

21 June 2021

Utilization of advanced engineering thermoplastic materials in fused filament fabrication (FFF) 3D printing process is critical in expanding additive manufacturing (AM) applications. Polypropylene (PP) is a widely used thermoplastic material, while s...

(This article belongs to the Special Issue Polymers in Additive Manufacturing)
  • Article
  • Open Access
72 Citations
5,010 Views
17 Pages

Enhanced Mechanical, Thermal and Antimicrobial Properties of Additively Manufactured Polylactic Acid with Optimized Nano Silica Content

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emanuel Velidakis,
  • Nikolaos Mountakis and ,
  • Lazaros Tzounis,
  • Marco Liebscher and
  • Sotirios A. Grammatikos
  • + 2 authors+ 0 author

15 April 2021

The scope of this work was to create, with melt mixing compounding process, novel nanocomposite filaments with enhanced properties that industry can benefit from, using commercially available materials, to enhance the performance of three-dimensional...

  • Article
  • Open Access
8 Citations
2,680 Views
16 Pages

Structure and Tribological Properties of TiN/DLC, CrN/DLC, TiAlCN/DLC, AlTiCN/DLC and AlCrTiN/DLC Hybrid Coatings on Tool Steel

  • Marcin Staszuk,
  • Daniel Pakuła,
  • Magdalena Olszowska,
  • Anna Kloc-Ptaszna and ,
  • Magdalena Szindler,
  • Andrzej N. Wieczorek,
  • Rafał Honysz,
  • Ewa Jonda and
  • Marcin Basiaga
  • + 4 authors+ 0 author

6 September 2025

In view of the need to increase the durability of working tools exposed to intense friction, this study analysed hybrid coatings (TiAlCN, AlTiCN, AlCrTiN, TiN, CrN) with a DLC (Diamond-Like Carbon) layer, deposited using PVD (Physical Vapour Depositi...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2,583 Views
23 Pages

A Proposed System for Temperature Measurement During Tensile Testing

  • Marius Andrei Mihalache,
  • Vasile Merticaru,
  • Vasile Ermolai,
  • Liviu Andrusca and ,
  • Nicanor Cimpoesu and
  • Florin Negoescu
  • + 1 author+ 0 author

4 September 2025

Integration of thermographic imaging with in situ scanning electron microscopy (SEM) analysis may aid in quantifying thermal–mechanical behavior during tensile testing of 3D-printed polymers, which gives information about fracture mechanics, in...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
38 Citations
6,161 Views
17 Pages

9 April 2020

The aim of this paper is to present the results of X-ray diffraction (XRD) tests and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) analyses on a natural and lime-treated clay, in order to determine the percentage of lime...

  • Article
  • Open Access
4 Citations
2,639 Views
23 Pages

Erosion, Mechanical and Microstructural Evolution of Cement Stabilized Coarse Soil for Embankments

  • Adel Belmana,
  • Victor Cavaleiro,
  • Mekki Mellas,
  • Luis Andrade Pais and ,
  • Hugo A. S. Pinto,
  • Vanessa Gonçalves,
  • Maria Vitoria Morais,
  • André Studart and
  • Leonardo Marchiori
  • + 4 authors+ 0 author

Internal erosion is a significant issue caused by water flow within soils, resulting in structural collapse of hydraulic structures, particularly in coarse soils located near rivers. These soils typically exhibit granulometric instability due to low...

  • Article
  • Open Access
3 Citations
3,212 Views
16 Pages

Experimental Investigation of Wavy-Lap Bonds with Natural Cotton Fabric Reinforcement under Cyclic Loading

  • Viktor Kolář,
  • Miroslav Müller,
  • Martin Tichý,
  • Rajesh Kumar Mishra and ,
  • Petr Hrabě,
  • Kristýna Hanušová and
  • Monika Hromasová
  • + 2 authors+ 0 author

26 August 2021

This study is focused on the mechanical properties and service life (safety) evaluation of hybrid adhesive bonds with shaped overlapping geometry (wavy-lap) and 100% natural cotton fabric used as reinforcement under cyclic loading using various inten...

(This article belongs to the Special Issue Advances in Textile Structural Composites)
  • Article
  • Open Access
7 Citations
2,991 Views
16 Pages

17 September 2021

The mechanical properties of the static and dynamic compression of concrete eroded by a 15% sodium sulfate solution were explored with a 70-mm-diameter true triaxial static-dynamic comprehensive loading test system, and an analysis of the weakening m...

(This article belongs to the Special Issue Research of Mechanical Behavior of Cement and Concrete Composites)
  • Article
  • Open Access
8 Citations
4,189 Views
11 Pages

26 March 2022

Ball shear testing is an efficient approach to investigate the mechanical reliability of solder joints at the structural level. In the present study, a series of low-speed ball shear tests were conducted to study the deformation and fracture characte...

(This article belongs to the Topic Fatigue and Fracture Assessment of Structural Components and Materials)
  • Article
  • Open Access
65 Citations
5,779 Views
17 Pages

Optimization of the Filler Concentration on Fused Filament Fabrication 3D Printed Polypropylene with Titanium Dioxide Nanocomposites

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emmanouil Velidakis,
  • Lazaros Tzounis and ,
  • Nikolaos Mountakis,
  • John Kechagias and
  • Sotirios Grammatikos
  • + 2 authors+ 0 author

4 June 2021

Polypropylene (PP) is an engineered thermoplastic polymer widely used in various applications. This work aims to enhance the properties of PP with the introduction of titanium dioxide (TiO2) nanoparticles (NPs) as nanofillers. Novel nanocomposite fil...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
12 Citations
10,678 Views
21 Pages

Evaluating Recycled Concrete Aggregate and Sand for Sustainable Construction Performance and Environmental Benefits

  • Saurabh Singh,
  • Suraj Kumar Singh,
  • Mohamed Mahgoub,
  • Shahnawaz Ahmed Mir and ,
  • Shruti Kanga,
  • Sujeet Kumar,
  • Pankaj Kumar and
  • Gowhar Meraj
  • + 3 authors+ 0 author

10 May 2024

This research investigates the potential of utilizing recycled concrete aggregate (RCA) and recycled sand (RS), derived from crushed concrete cubes, as sustainable alternatives in construction materials. The study comprehensively evaluates the proper...

  • Article
  • Open Access
2 Citations
961 Views
16 Pages

Effects of Biochar Type and Addition Rate on Pore Seepage Characteristics of Saline Soil and Associated Mechanisms

  • Mingyu Li,
  • Yanxing Zhang,
  • Xuchao Song,
  • Baiyang Song and ,
  • Jiaxin Geng and
  • Yaomeng Wang
  • + 1 author+ 0 author

9 February 2026

Water seepage in saline soils can compromise the stability of landfill cover layers and cause ecological pollution. Biochar, recognized as a novel sustainable material for soil improvement, has garnered significant attention due to its large specific...

(This article belongs to the Section Environmental Aspects in Colloid and Interface Science)
  • Systematic Review
  • Open Access
973 Views
30 Pages

Beyond the Diatom Test: Emerging Diatom-Based Approaches and Medico-Legal Validation in Forensic Drowning Investigation—A PRISMA-ScR Scoping Review

  • Paolo Bailo,
  • Chiara Carsana,
  • Maria Garreffa,
  • Stefano Tambuzzi and ,
  • Matteo Marchesi,
  • Paola Primignani,
  • Andrea Piccinini,
  • Riccardo Zoja and
  • Guendalina Gentile
  • + 4 authors+ 0 author

Forensic diagnosis of drowning remains challenging because postmortem findings are often supportive rather than pathognomonic. The classical diatom test has long been used as an ancillary tool, but its interpretation remains controversial because of...

  • Article
  • Open Access
14 Citations
5,984 Views
13 Pages

Study on Insulation Breakdown Characteristics of Printed Circuit Board under Continuous Square Impulse Voltage

  • Quan Zhou,
  • Mingqian Wen,
  • Taotao Xiong,
  • Tianyan Jiang and ,
  • Ming Zhou,
  • Xi Ouyang and
  • Lai Xing
  • + 2 authors+ 0 author

25 October 2018

The widely distributed interconnects in printed circuit boards (PCBs) easily couple with high voltage under the action of electromagnetic pulses, which leads to insulation failure. In this study, the dielectric breakdown characteristics of four typic...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
15 Citations
3,083 Views
13 Pages

Soil-testing formula fertilization technology is a powerful tool for preserving arable land and ensuring food security. The purpose of this study was to investigate farmers’ acceptance intentions and behavioral responses to soil-testing formula...

(This article belongs to the Special Issue Environmental Management and Pro-Environmental Behaviors)
  • Article
  • Open Access
101 Citations
10,077 Views
21 Pages

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

  • Codruta Soica,
  • Corina Danciu,
  • Germaine Savoiu-Balint,
  • Florin Borcan and ,
  • Rita Ambrus,
  • Istvan Zupko,
  • Florina Bojin,
  • Dorina Coricovac,
  • Sorina Ciurlea and
  • Petru Matusz
  • + 8 authors+ 3 authors

9 May 2014

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ...

(This article belongs to the Section Biochemistry)
  • Article
  • Open Access
18 Citations
3,300 Views
23 Pages

Investigation of Interlaminar Shear Properties of CFRP Composites at Elevated Temperatures Using the Lempel-Ziv Complexity of Acoustic Emission Signals

  • Claudia Barile,
  • Caterina Casavola,
  • Giovanni Pappalettera,
  • Vimalathithan Paramsamy Kannan and
  • Gilda Renna

15 June 2022

Three-point bending tests on Short Beam Shear (SBS) specimens are performed to investigate the interlaminar shear properties of plain weave fabric CFRP composites. The tests are performed in a controlled environmental chamber at two different elevate...

(This article belongs to the Topic Recent Advances in Structural Health Monitoring)
  • Article
  • Open Access
14 Citations
5,120 Views
22 Pages

Erosion Mapping of Through-Thickness Toughened Powder Epoxy Gradient Glass-Fiber-Reinforced Polymer (GFRP) Plates for Tidal Turbine Blades

  • Emadelddin Hassan,
  • Iasonas Zekos,
  • Philip Jansson,
  • Toa Pecur and ,
  • Christophe Floreani,
  • Colin Robert,
  • Conchúr M. Ó Brádaigh and
  • Margaret M. Stack
  • + 3 authors+ 0 author

25 February 2021

Erosion of tidal turbine blades in the marine environment is a major material challenge due to the high thrust and torsional loading at the rotating surfaces, which limits the ability to harness energy from tidal sources. Polymer–matrix composites ca...

  • Feature Paper
  • Article
  • Open Access
19 Citations
3,853 Views
16 Pages

Thermomechanical and Morphological Studies of CFRP Tested in Different Environmental Conditions

  • Claudia Barile,
  • Caterina Casavola,
  • Paramsamy Kannan Vimalathithan,
  • Marco Pugliese and
  • Vincenzo Maiorano

25 December 2018

The present work describes the mechanical characterization combined with the thermal degradation kinetics of Carbon Fiber Reinforced Polymers (CFRP). The thermal degradation kinetics of CFRP have never been studied in the past. In that regard, the pr...

(This article belongs to the Special Issue Carbon Fibre Reinforced Plastics)
  • Article
  • Open Access
2 Citations
2,203 Views
23 Pages

Concrete Carbonation of Deep Burial Storage Constructions under Model Aging Conditions

  • Vyacheslav Medvedev,
  • Andrey Pustovgar,
  • Aleksey Adamtsevich and
  • Liubov Adamtsevich

19 December 2023

To ensure the safe operation of concrete structures of deep-burial storages, it is necessary to research the degradation mechanisms of such structures. Concrete carbonation is one of the key factors determining the service life of concrete structures...

(This article belongs to the Special Issue Safety and Optimization of Building Structures)
  • Article
  • Open Access
14 Citations
3,222 Views
23 Pages

14 January 2023

In engineering practice, fiber addition is a frequently used method to improve the tensile property of asphalt mixture. However, the optimum fiber type and dosage have not been determined by direct tensile tests. In this paper, monotonic tensile test...

(This article belongs to the Special Issue Characterization, Applications and New Technologies of Civil Engineering Materials and Structures)
  • Article
  • Open Access
36 Citations
4,303 Views
19 Pages

Laboratory Testing to Research the Micro-Structure and Dynamic Characteristics of Frozen–Thawed Marine Soft Soil

  • Zhi Ding,
  • Bowen Kong,
  • Xinjiang Wei,
  • Mengya Zhang and ,
  • Baolong Xu and
  • Fangjie Zhao
  • + 1 author+ 0 author

The use of artificial freezing can change the mechanical properties of marine clay. In the construction of cross passages in metro tunnels in which the artificial ground freezing (AGF) method is applied, freeze–thaw circulation and cyclic loadi...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
4 Citations
3,224 Views
25 Pages

Assessment of Precast Concrete Deterioration in Marine Environments Using Non-Destructive Methods

  • Tarek Ibrahim Selouma,
  • Walid Fouad Edris,
  • Abd Al-Kader A. Al Sayed,
  • Rashid Al-Marri and
  • Mostafa Shaaban

Concrete structures in marine environments face significant degradation due to reinforcement corrosion caused by chloride ingress and sulfate attack. Poor construction quality, inadequate standards, and suboptimal design can further accelerate deteri...

(This article belongs to the Special Issue Study on the Durability of Construction Materials and Structures)
  • Article
  • Open Access
18 Citations
6,065 Views
10 Pages

Thermoplastic Starch Films Added with Dry Nopal (Opuntia Ficus Indica) Fibers

  • Fabrizio Scognamiglio,
  • Daniele Mirabile Gattia,
  • Graziella Roselli,
  • Franca Persia and ,
  • Ugo De Angelis and
  • Carlo Santulli
  • + 1 author+ 0 author

19 November 2019

Dry fibers coming from garden waste, originating from Opuntia ficus indica, were introduced in amounts of either 8 or 16 wt % into a self-produced thermoplastic starch (TPS) based on potato starch and glycerol. Thermal (differential scanning calorime...

(This article belongs to the Special Issue Plant Fibers)
  • Article
  • Open Access
11 Citations
3,471 Views
17 Pages

15 January 2021

The paper is focused on creep-rupture tests of samples made of the 2024 alloy in the T3511 temper under uniaxial tensile stress conditions. The basic characteristics of the material at the temperatures of 100, 200 and 300 °C were determined, such...

  • Article
  • Open Access
39 Citations
12,872 Views
12 Pages

26 March 2023

This article examines the impact of fatigue cycles on polylactide samples produced by 3D printing using the FDM method. Samples were printed in three infill degree variants: 50%, 75% and 100%. To compere the influence of infill degree on PLA properti...

(This article belongs to the Special Issue Application of Functional Polymer Materials for Advanced Technologies)
  • Article
  • Open Access
12 Citations
4,506 Views
21 Pages

3 November 2021

The aim of this study is to verify the reliability of NOx emissions measured using Smart Emissions Measurement System (SEMS) equipment in comparison with the NOx emissions measured using certified Portable Emissions Measurement System (PEMS) equipmen...

(This article belongs to the Special Issue Advances in Reduction Technologies of Gas Emissions (CO2, NOx, and SO2) in Combustion-Related Applications)
  • Article
  • Open Access
201 Views
23 Pages

1 October 2026

Xinjiang’s inland arid climate has led to widespread saline–alkali soils. Along with frequent strong earthquakes, they pose challenges to foundation and infrastructure construction. So, understanding the small-strain dynamic properties of...

(This article belongs to the Special Issue Advanced Studies in Nonlinear Dynamics, Numerical Modelling and Applications in Masonry Structures)
  • Article
  • Open Access
56 Citations
7,889 Views
10 Pages

New Polylactic Acid Composites Reinforced with Artichoke Fibers

  • Luigi Botta,
  • Vincenzo Fiore,
  • Tommaso Scalici,
  • Antonino Valenza and
  • Roberto Scaffaro

16 November 2015

In this work, artichoke fibers were used for the first time to prepare poly(lactic acid) (PLA)-based biocomposites. In particular, two PLA/artichoke composites with the same fiber loading (10% w/w) were prepared by the film-stacking method: the firs...

(This article belongs to the Special Issue Green Composites)

of 293