Skip to Content

195 Results Found

  • Article
  • Open Access
4 Citations
3,119 Views
12 Pages

Effects of the Interlayer Toughening Agent Structure on the Flow Behavior during the z-RTM Process

  • Weidong Li,
  • Gang Liu,
  • Jianwen Bao,
  • Shuhua Dong and ,
  • Xiaolan Hu,
  • Xiaosu Yi and
  • Zhitao Lin
  • + 2 authors+ 0 author

2 May 2022

In this paper, interlayer toughening composites were prepared by the z-directional injection RTM process (z-RTM), which has the advantage of increasing the interlaminar toughness and shortening the filling time and completely impregnating the fibers....

(This article belongs to the Special Issue Advanced Composite Material Design and Manufacturing Technology for Aerospace Engineering)
  • Article
  • Open Access

Fabrication and Process Verification of Large Length-to-Width Ratio Multi-Cavity Box Sections with Composites by Integral RTM Molding

  • Ye Li,
  • Jing Guo,
  • Xiancheng He,
  • Hansong Liu and ,
  • Xiangyu Zhong and
  • Jianwen Bao
  • + 1 author+ 0 author

18 November 2026

In view of the structural characteristics of multi-cavity box sections, an integrated resin transfer molding (RTM) process was developed in this study. The rheological properties of the AC520RTM resin system were investigated. The results indicate th...

(This article belongs to the Special Issue Structure, Properties and Applications of Nanocomposites and Polymer Based Materials (2nd Edition))
  • Article
  • Open Access
8 Citations
2,394 Views
21 Pages

1 May 2024

A co-curing resin system consisting of 9368 epoxy resin for prepreg and 6808 epoxy resin for resin transfer molding (RTM) was developed. A corresponding preparation method for a novel polymer composite bolted T-joint with internal skeleton and extern...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
53 Citations
4,355 Views
32 Pages

Application of KNN and ANN Metamodeling for RTM Filling Process Prediction

  • Boon Xian Chai,
  • Boris Eisenbart,
  • Mostafa Nikzad,
  • Bronwyn Fox and ,
  • Ashley Blythe,
  • Kyaw Hlaing Bwar,
  • Jinze Wang,
  • Yuntong Du and
  • Sergey Shevtsov
  • + 4 authors+ 0 author

7 September 2023

Process simulation is frequently adopted to facilitate the optimization of the resin transfer molding process. However, it is computationally costly to simulate the multi-physical, multi-scale process, making it infeasible for applications involving...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
19 Citations
6,372 Views
9 Pages

Moisture Adsorption and Desorption Behavior of Raw Materials for the T-RTM Process

  • Janek Herzog,
  • Rainer Wendel,
  • Peter G. Weidler,
  • Michael Wilhelm and ,
  • Philipp Rosenberg and
  • Frank Henning
  • + 1 author+ 0 author

The use of fiber reinforced plastics (FRPs) has significant potential to reduce the weight of components. As regards the sustainability of these components, thermoplastic matrices offer more potential for recycling than thermoset ones. A possible man...

(This article belongs to the Special Issue Advanced Fiber Reinforced Polymer Composites)
  • Article
  • Open Access
1 Citations
1,617 Views
16 Pages

29 July 2025

By embedding optical fiber sensors into fiber preforms and utilizing liquid molding processes such as resin transfer molding (RTM), intelligent composite materials with self-sensing capabilities can be fabricated. In the liquid molding process of the...

(This article belongs to the Section Polymer Physics and Theory)
  • Review
  • Open Access
781 Views
27 Pages

Retrieval of Vegetation Nitrogen from Hyperspectral Remote Sensing: A Critical Review of Recent Methodological Advances

  • Jochem Verrelst,
  • Anirudh Belwalkar,
  • Kang Yu,
  • Miguel Morata and
  • Manish Kumar Patel

9 September 2026

Hyperspectral retrieval of nitrogen-related vegetation variables has undergone rapid methodological advances driven by the emergence of protein-sensitive radiative transfer models (RTMs), modern machine learning (ML), and operational imaging spectros...

(This article belongs to the Special Issue Hyperspectral Data Analysis of Vegetation and Soil Monitoring)
  • Article
  • Open Access
1 Citations
2,815 Views
13 Pages

12 November 2021

As an important method for seismic data processing, reverse time migration (RTM) has high precision but involves high-intensity calculations. The calculation an RTM surface offset (shot–receiver distance) domain gathers provides intermediary data for...

(This article belongs to the Special Issue Applications of Parallel Computing)
  • Article
  • Open Access
10 Citations
3,469 Views
17 Pages

Flow Front Monitoring in High-Pressure Resin Transfer Molding Using Phased Array Ultrasonic Testing to Optimize Mold Filling Simulations

  • Linus Littner,
  • Richard Protz,
  • Eckart Kunze,
  • Yannick Bernhardt and ,
  • Marc Kreutzbruck and
  • Maik Gude
  • + 1 author+ 0 author

30 December 2023

During the production of fiber-reinforced plastics using resin transfer molding (RTM), various characteristic defects and flaws can occur, such as fiber displacement and fiber waviness. Particularly in high-pressure RTM (HP-RTM), fiber misalignments...

(This article belongs to the Special Issue Structural Design and Analysis of Fiber Composites)
  • Article
  • Open Access
2 Citations
1,632 Views
19 Pages

3 April 2025

The production rate of filament wound composites can be improved by using the resin transfer moulding (RTM) process on dry filament wound reinforcements. Finite-element simulation of the resin flow in the porous dry fibre preform is needed to underst...

(This article belongs to the Special Issue Composite Materials Processing, Modeling and Simulation)
  • Article
  • Open Access
380 Views
24 Pages

Three-Dimensional Simulation of Transient Resin Non-Isothermal Flow Across a Porous Reinforcement with a Sink Term: Capillary Number Evaluation in RTM Process

  • João V. N. Sousa,
  • João M. P. Q. Delgado,
  • Adjalmir A. Rocha,
  • Hortência L. F. Magalhães and ,
  • Priscila S. Souza,
  • Mylena M. D. O. Silva,
  • Romário D. Moura,
  • Fernando F. Vieira,
  • Márcia R. Luiz and
  • Antonio G. B. Lima
  • + 8 authors+ 3 authors

2 September 2026

Resin Transfer Molding (RTM) is a broadly applied composite fabrication technique in which liquid resin is injected into a sealed mold housing a fibrous preform. This technique enables the industrial-scale production of large, complex-shaped componen...

(This article belongs to the Section Advanced Composites)
  • Review
  • Open Access
3,595 Views
56 Pages

Research Progress on Advanced Molding Technologies for Carbon Fiber-Reinforced Polymer Composites: Defect Control and Process Optimization

  • Qun Li,
  • Xufeng Song,
  • Longzhan Zheng,
  • Guangxi Li and ,
  • Qingqing Lü,
  • Liquan Yang,
  • Erbo Liu,
  • Yuqin Ma and
  • Zhoukui Li
  • + 4 authors+ 0 author

8 June 2026

Carbon fiber-reinforced polymer (CFRP) composites are in urgent demand in the aerospace, new energy vehicle, and wind power sectors owing to their superior specific strength, specific modulus, and lightweight potential. However, molding defects, such...

(This article belongs to the Topic Advanced Composites Manufacturing and Plastics Processing, 2nd Volume)
  • Article
  • Open Access
262 Views
28 Pages

Canopy Chlorophyll Retrieval in Structurally Complex Pedunculate Oak Forests: Empirical Machine Learning Versus Hybrid PROSAIL–GPR

  • Nikola Zorić,
  • Anita Simic Milas,
  • Jochem Verrelst,
  • Dinka Matošević and ,
  • Ante Seletković and
  • Ivan Balenović
  • + 1 author+ 0 author

29 October 2026

Hybrid radiative transfer model–machine learning (RTM–ML) approaches can incorporate physical constraints into vegetation-trait retrieval, but their advantage over empirical learning remains uncertain for very-high-resolution, limited-ban...

  • Article
  • Open Access
2 Citations
3,134 Views
12 Pages

Introduction: Non-invasive brain stimulation can modulate both neural processing and behavioral performance. Its effects may be influenced by the stimulated area and hemisphere. In this study (EC no. 09083), repetitive transcranial magnetic stimulati...

(This article belongs to the Section Neurorehabilitation)
  • Article
  • Open Access
15 Citations
3,656 Views
13 Pages

29 July 2022

The long cycle of manufacturing continuous carbon fiber-reinforced composite has significantly limited its application in mass vehicle production. High-pressure resin transfer molding (HP-RTM) is the process with the ability to manufacture composites...

  • Article
  • Open Access
984 Views
13 Pages

The Relationship Between Emotion Processing Assessed by an Affect Rating Task and Depression Symptoms Following the Accelerated Sequential Dorsolateral–Dorsomedial Prefrontal rTMS Treatment

  • Ruiqin Chen,
  • Zerun Dong,
  • Ruijie Geng,
  • Haibin Li and ,
  • Yuan Wang,
  • Yuanyuan Li,
  • Qiong Ding,
  • Yingying Zhang,
  • Xuechen Ding and
  • Yi-Jie Zhao
  • + 9 authors+ 4 authors

26 January 2026

Background: Emotion processing is critical in the neuropathology of major depressive disorder (MDD), while its relationship with clinical treatment remains unclear. This study aims to indicate the associations between emotion processing and treatment...

(This article belongs to the Topic Risk and Protective Factors in Social Interactions: Behavioral and Neural Evidence)
  • Article
  • Open Access
13 Citations
4,154 Views
13 Pages

Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes

  • Moritz Salzmann,
  • Yannick Blößl,
  • Andrea Todorovic and
  • Ralf Schledjewski

17 September 2021

Near-infrared spectroscopy (NIR) was implemented in the resin transfer molding (RTM) process to inline monitor the degree of curing of a bio-based epoxy resin, which consists of epoxidized linseed oil (resin) and citric acid (hardener), respectively....

(This article belongs to the Special Issue Bio-Based Polymer Composites)
  • Proceeding Paper
  • Open Access
1,334 Views
8 Pages

Urban Air Mobility (UAM) is increasingly recognized as one of the promising methods for future urban transportation, offering higher average speeds than conventional means of transportation. This study investigates the sustainable and efficient produ...

(This article belongs to the Proceedings of The 15th EASN International Conference on “Innovation in Aviation & Space Towards Sustainability Today & Tomorrow”)
  • Article
  • Open Access
6 Citations
4,127 Views
17 Pages

5 July 2021

Strengthening steel structures by using carbon fiber reinforced polymer (CFRP) laminates showed a growth trend in the last several years. A similar strengthening technique, known as adhesive bonding, has also been adopted. This paper presented a prom...

(This article belongs to the Special Issue Polymer Composites for Structural Applications)
  • Communication
  • Open Access
60 Citations
4,544 Views
12 Pages

Comprehensive Composite Mould Filling Pattern Dataset for Process Modelling and Prediction

  • Boon Xian Chai,
  • Jinze Wang,
  • Thanh Kim Mai Dang,
  • Mostafa Nikzad and ,
  • Boris Eisenbart and
  • Bronwyn Fox
  • + 1 author+ 0 author

The Resin Transfer Moulding process receives great attention from both academia and industry, owing to its superior manufacturing rate and product quality. Particularly, the progression of its mould filling stage is crucial to ensure a complete reinf...

(This article belongs to the Special Issue Characterization and Modelling of Composites, Volume III)
  • Article
  • Open Access
5 Citations
4,481 Views
17 Pages

18 January 2020

The dimensionless “injectability number” was devised to assist composite engineers in the fabrication of continuous fiber composites by Liquid Composite Molding (LCM), i.e., by injecting a liquid polymer resin through a fibrous reinforcem...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2019)
  • Article
  • Open Access
8 Citations
5,941 Views
16 Pages

18 January 2020

The present article introduces a dimensionless number devised to assist composite engineers in the fabrication of continuous fiber composites by Liquid Composite Molding (LCM), i.e., by injecting a liquid polymer resin through a fibrous reinforcement...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2019)
  • Article
  • Open Access
9 Citations
5,572 Views
18 Pages

Self-Extinguishing Resin Transfer Molding Composites Using Non-Fire-Retardant Epoxy Resin

  • Zhi Geng,
  • Shuaishuai Yang,
  • Lianwang Zhang,
  • Zhenzhen Huang and ,
  • Qichao Pan,
  • Jidi Li,
  • Jianan Weng,
  • Jianwen Bao,
  • Zhengwei You and
  • Bo Zhu
  • + 6 authors+ 1 author

15 December 2018

Introducing fire-retardant additives or building blocks into resins is a widely adopted method used for improving the fire retardancy of epoxy composites. However, the increase in viscosity and the presence of insoluble additives accompanied by resin...

  • Article
  • Open Access
31 Citations
6,344 Views
19 Pages

Site-Specific Effects of Online rTMS during a Working Memory Task in Healthy Older Adults

  • Lysianne Beynel,
  • Simon W. Davis,
  • Courtney A. Crowell,
  • Moritz Dannhauer and ,
  • Wesley Lim,
  • Hannah Palmer,
  • Susan A. Hilbig,
  • Alexandra Brito,
  • Connor Hile and
  • Lawrence G. Appelbaum
  • + 9 authors+ 4 authors

The process of manipulating information within working memory is central to many cognitive functions, but also declines rapidly in old age. Improving this process could markedly enhance the health-span in older adults. The current pre-registered, ran...

(This article belongs to the Special Issue Transcranial Magnetic Stimulation (TMS): Applications in Clinical and Basic Neuroscience)
  • Systematic Review
  • Open Access
21 Citations
8,906 Views
22 Pages

Metaanalysis of Repetitive Transcranial Magnetic Stimulation (rTMS) Efficacy for OCD Treatment: The Impact of Stimulation Parameters, Symptom Subtype and rTMS-Induced Electrical Field

  • Fateme Dehghani-Arani,
  • Reza Kazemi,
  • Amir-Homayun Hallajian,
  • Sepehr Sima and ,
  • Samaneh Boutimaz,
  • Sepideh Hedayati,
  • Saba Koushamoghadam,
  • Razieh Safarifard and
  • Mohammad Ali Salehinejad
  • + 4 authors+ 0 author

10 September 2024

Background: Repetitive transcranial magnetic stimulation (rTMS) has recently demonstrated significant potential in treating obsessive-compulsive disorder (OCD). However, its effectiveness depends on various parameters, including stimulation parameter...

(This article belongs to the Special Issue Neuro-Psychiatric Disorders: Updates on Diagnosis and Treatment)
  • Article
  • Open Access
22 Citations
5,556 Views
18 Pages

Effects of Chronic High-Frequency rTMS Protocol on Respiratory Neuroplasticity Following C2 Spinal Cord Hemisection in Rats

  • Pauline Michel-Flutot,
  • Isley Jesus,
  • Valentin Vanhee,
  • Camille H. Bourcier and ,
  • Laila Emam,
  • Abderrahim Ouguerroudj,
  • Kun-Ze Lee,
  • Lyandysha V. Zholudeva,
  • Michael A. Lane and
  • Stéphane Vinit
  • + 7 authors+ 2 authors

19 March 2022

High spinal cord injuries (SCIs) lead to permanent diaphragmatic paralysis. The search for therapeutics to induce functional motor recovery is essential. One promising noninvasive therapeutic tool that could harness plasticity in a spared descending...

(This article belongs to the Special Issue Pathophysiology of Spinal Cord Injury (SCI))
  • Article
  • Open Access
9 Citations
3,977 Views
14 Pages

Imaging of the Internal Structure of Permafrost in the Tibetan Plateau Using Ground Penetrating Radar

  • Yao Wang,
  • Zhihong Fu,
  • Xinglin Lu,
  • Shanqiang Qin and ,
  • Haowen Wang and
  • Xiujuan Wang
  • + 1 author+ 0 author

The distribution of the permafrost in the Tibetan Plateau has dramatically changed due to climate change, expressed as increasing permafrost degradation, thawing depth deepening and disappearance of island permafrost. These changes have serious impac...

(This article belongs to the Special Issue Applications of Electromagnetic Waves)
  • Article
  • Open Access
14 Citations
3,762 Views
19 Pages

2 November 2020

Burn severity mapping is critical to quantifying fire impact on key ecological processes and post-fire forest management. Satellite remote sensing has the advantages of high spatial-temporal resolution and large-scale monitoring and provides a more e...

(This article belongs to the Special Issue Advances in Remote Sensing of Post-fire Environmental Damage and Recovery Dynamics)
  • Article
  • Open Access
3 Citations
2,715 Views
15 Pages

Q-compensated reverse time migration (Q-RTM) is a crucial technique in seismic imaging. However, stability is a prominent concern due to the exponential increase in high-frequency ambient noise during seismic wavefield propagation. The two primary st...

(This article belongs to the Special Issue Fractional Equations and Calculation Methods in Exploration Seismology)
  • Review
  • Open Access
16 Citations
6,642 Views
20 Pages

8 October 2021

Repetitive transcranial magnetic stimulation (rTMS) for post-stroke aphasia (PSA) has been suggested to promote improvement of language function when used in combination with rehabilitation. However, many challenges remain. In some reports examined b...

(This article belongs to the Section Medical Imaging and Theranostics)
  • Article
  • Open Access
96 Citations
12,401 Views
27 Pages

Emulation of Leaf, Canopy and Atmosphere Radiative Transfer Models for Fast Global Sensitivity Analysis

  • Jochem Verrelst,
  • Neus Sabater,
  • Juan Pablo Rivera,
  • Jordi Muñoz-Marí and ,
  • Jorge Vicent,
  • Gustau Camps-Valls and
  • José Moreno
  • + 2 authors+ 0 author

19 August 2016

Physically-based radiative transfer models (RTMs) help understand the interactions of radiation with vegetation and atmosphere. However, advanced RTMs can be computationally burdensome, which makes them impractical in many real applications, especial...

  • Review
  • Open Access
34 Citations
8,225 Views
16 Pages

Revisiting Hemispheric Asymmetry in Mood Regulation: Implications for rTMS for Major Depressive Disorder

  • Benjamin C. Gibson,
  • Andrei Vakhtin,
  • Vincent P. Clark,
  • Christopher C. Abbott and
  • Davin K. Quinn

14 January 2022

Hemispheric differences in emotional processing have been observed for over half a century, leading to multiple theories classifying differing roles for the right and left hemisphere in emotional processing. Conventional acceptance of these theories...

(This article belongs to the Section Neuropsychiatry)
  • Communication
  • Open Access
9 Citations
3,650 Views
16 Pages

3-D Multi-Component Reverse Time Migration Method for Tunnel Seismic Data

  • Peng Guan,
  • Cuifa Shao,
  • Yuyong Jiao,
  • Guohua Zhang and ,
  • Bin Li,
  • Jie Zhou and
  • Pei Huang
  • + 2 authors+ 0 author

7 May 2021

Migration imaging is a key step in tunnel seismic data processing. Due to the limitation of tunnel space, tunnel seismic data are small-quantity, multi-component, and have a small offset. Kirchhoff migration based on the ray theory is limited to the...

(This article belongs to the Special Issue Sensors for Imaging Cultural Heritage: Technologies, Methods and Data Processing)
  • Article
  • Open Access
9 Citations
3,767 Views
19 Pages

Cluster Low-Streams Regression Method for Hyperspectral Radiative Transfer Computations: Cases of O2 A- and CO2 Bands

  • Ana del Águila,
  • Dmitry S. Efremenko,
  • Víctor Molina García and
  • Michael Yu. Kataev

15 April 2020

Current atmospheric composition sensors provide a large amount of high spectral resolution data. The accurate processing of this data employs time-consuming line-by-line (LBL) radiative transfer models (RTMs). In this paper, we describe a method to a...

(This article belongs to the Special Issue Current Advances in Radiative Transfer Modeling for Satellite Optical Remote Sensing Applications)
  • Article
  • Open Access
22 Citations
7,622 Views
21 Pages

Transcranial Magnetic Stimulation of the Dorsolateral Prefrontal Cortex Increases Posterior Theta Rhythm and Reduces Latency of Motor Imagery

  • Semen Kurkin,
  • Susanna Gordleeva,
  • Andrey Savosenkov,
  • Nikita Grigorev and ,
  • Nikita Smirnov,
  • Vadim V. Grubov,
  • Anna Udoratina,
  • Vladimir Maksimenko,
  • Victor Kazantsev and
  • Alexander E. Hramov
  • + 5 authors+ 0 author

11 May 2023

Experiments show activation of the left dorsolateral prefrontal cortex (DLPFC) in motor imagery (MI) tasks, but its functional role requires further investigation. Here, we address this issue by applying repetitive transcranial magnetic stimulation (...

(This article belongs to the Special Issue Monitoring and Sensing in Neuroscience)
  • Systematic Review
  • Open Access
7 Citations
5,667 Views
18 Pages

Anomia, characterized by difficulty in word retrieval, particularly action verbs, poses a significant challenge in post-stroke aphasia. Repetitive transcranial magnetic stimulation (rTMS) has gained attention for language processing investigations an...

(This article belongs to the Section Neurotechnology and Neuroimaging)
  • Article
  • Open Access
24 Citations
3,957 Views
16 Pages

19 September 2020

In the present study, surface treatment techniques such as room temperature machining (RTM) and low temperature burnishing (LTB) processing have been used to improve the microstructure of GH738 superalloy. Nano-grains and nano-twins are obtained on t...

(This article belongs to the Section Corrosion)
  • Communication
  • Open Access
23 Citations
5,093 Views
8 Pages

Preparation of Glass Fabric/Poly(l-lactide) Composites by Thermoplastic Resin Transfer Molding

  • Elodie Louisy,
  • Fabienne Samyn,
  • Serge Bourbigot,
  • Gaëlle Fontaine and
  • Fanny Bonnet

15 February 2019

This study reports the first example of the production of polylactide composites prepared by Thermoplastic Resin Transfer Molding (T-RTM) via in situ bulk polymerization of l-lactide (l-LA) after injection in a closed mold containing glass fabrics. T...

  • Article
  • Open Access
9 Citations
7,128 Views
15 Pages

9 October 2021

In this paper, structural design and analysis of a composite boat hull was performed. A resin transfer molding manufacturing method was adopted for manufacturing the composite boat hull. The RTM process is an advanced composite manufacturing method t...

(This article belongs to the Special Issue Multifunction Materials, Interfaces, and Composites: Design and Applications)
  • Article
  • Open Access
22 Citations
6,000 Views
16 Pages

20 May 2021

The evaluation and inspection of steel bars in reinforced concrete structures are critical for prolonging the service life of buildings. In this regard, ground-penetrating radar (GPR) has been a crucial alternative due to its non-invasiveness and con...

(This article belongs to the Special Issue Data Fusion, Integration and Advances of Non-destructive Testing Methods in Engineering and Geosciences)
  • Article
  • Open Access
21 Citations
5,977 Views
17 Pages

Directed Evolution of Recombinant C-Terminal Truncated Staphylococcus epidermidis Lipase AT2 for the Enhancement of Thermostability

  • Jiivittha Veno,
  • Nor Hafizah Ahmad Kamarudin,
  • Mohd Shukuri Mohamad Ali,
  • Malihe Masomian and
  • Raja Noor Zaliha Raja Abd. Rahman

4 November 2017

In the industrial processes, lipases are expected to operate at temperatures above 45 °C and could retain activity in organic solvents. Hence, a C-terminal truncated lipase from Staphylococcus epidermis AT2 (rT-M386) was engineered by directed evolut...

(This article belongs to the Special Issue Microbial Enzymes)
  • Review
  • Open Access
10 Citations
5,996 Views
26 Pages

Modulating Visuomotor Sequence Learning by Repetitive Transcranial Magnetic Stimulation: What Do We Know So Far?

  • Laura Szücs-Bencze,
  • Teodóra Vékony,
  • Orsolya Pesthy,
  • Nikoletta Szabó and ,
  • Tamás Zsigmond Kincses,
  • Zsolt Turi and
  • Dezso Nemeth
  • + 2 authors+ 0 author

Predictive processes and numerous cognitive, motor, and social skills depend heavily on sequence learning. The visuomotor Serial Reaction Time Task (SRTT) can measure this fundamental cognitive process. To comprehend the neural underpinnings of the S...

  • Article
  • Open Access
11 Citations
2,257 Views
14 Pages

8 May 2025

Recycling carbon-fiber-reinforced plastics (CFRPs) is crucial for sustainable material utilization, particularly in aerospace applications, where large quantities of prepreg waste are generated. This study investigated the mechanical properties of hi...

(This article belongs to the Special Issue Mechanical and Dynamic Characteristics of Polymers and Polymer Composites)
  • Article
  • Open Access
55 Citations
11,163 Views
13 Pages

Preparation of High-Performance Carbon Fiber-Reinforced Epoxy Composites by Compression Resin Transfer Molding

  • Zeyu Sun,
  • Jie Xiao,
  • Lei Tao,
  • Yuanping Wei and ,
  • Shijie Wang,
  • Hui Zhang,
  • Shu Zhu and
  • Muhuo Yu
  • + 3 authors+ 0 author

20 December 2018

To satisfy the light weight requirements of vehicles owing to the aggravation of environmental pollution, carbon-fiber (CF)-reinforced epoxy composites have been chosen as a substitute for traditional metal counterparts. Since the current processing...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers)
  • Article
  • Open Access
30 Citations
9,178 Views
15 Pages

29 April 2019

Carbon Fiber Reinforced Plastics (CFRP) is a material developed for its high strength and light weight in a broad variety of industries including aerospace, automotive, and leisure. Due to the rapid molding cycle time, high-pressure resin transfer mo...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
9 Citations
4,375 Views
12 Pages

Effect of Structural Uncertainty in Passive Microwave Soil Moisture Retrieval Algorithm

  • Lanka Karthikeyan,
  • Ming Pan,
  • Dasika Nagesh Kumar and
  • Eric F. Wood

24 February 2020

Passive microwave sensors use a radiative transfer model (RTM) to retrieve soil moisture (SM) using brightness temperatures (TB) at low microwave frequencies. Vegetation optical depth (VOD) is a key input to the RTM. Retrieval algorithms can analytic...

(This article belongs to the Special Issue Radar and Radiometric Sensors and Sensing)
  • Article
  • Open Access
75 Citations
11,439 Views
24 Pages

An Emulator Toolbox to Approximate Radiative Transfer Models with Statistical Learning

  • Juan Pablo Rivera,
  • Jochem Verrelst,
  • Jose Gómez-Dans,
  • Jordi Muñoz-Marí and ,
  • José Moreno and
  • Gustau Camps-Valls
  • + 1 author+ 0 author

22 July 2015

Physically-based radiative transfer models (RTMs) help in understanding the processes occurring on the Earth’s surface and their interactions with vegetation and atmosphere. When it comes to studying vegetation properties, RTMs allows us to study lig...

  • Communication
  • Open Access
2 Citations
1,997 Views
7 Pages

7 October 2023

(1) Background: The cerebellum is well known to have functionalities beyond the control of motor function. However, brain stimulation studies have not explored the potential of this region to impact downstream processes which are imperative to multip...

(This article belongs to the Special Issue rTMS Research in Cognition: From Mice to Humans)
  • Systematic Review
  • Open Access
1 Citations
2,032 Views
14 Pages

Repetitive Transcranial Magnetic Stimulation in Migraine: Clinical Outcomes and Neurobiological Mechanisms—A Systematic Review

  • Robert Constantin Zgarbura,
  • Leea Cristescu Rizea,
  • Madalin Dinca,
  • Alexandru Pavel and ,
  • Oana-Andreea Parliteanu,
  • Jari Sabri and
  • Catalina Tudose
  • + 2 authors+ 0 author

Background: Migraine is a highly prevalent neurological disorder associated with substantial disability and socioeconomic burden. Although pharmacological therapies remain the mainstay of treatment, their effectiveness may be limited by incomplete re...

(This article belongs to the Section Pain Research)
  • Article
  • Open Access
5 Citations
3,420 Views
21 Pages

19 December 2022

A composite thin shell with a high fiber volume fraction prepared by resin transfer molding (RTM) may have void defects, which create deformations in the final curing and lead to the final product being unable to meet the actual assembly requirements...

(This article belongs to the Special Issue Polymer-Based Three-Dimensional (3D) Textile Composites)

of 4