Sulfur mustard (SM) and nitrogen mustard (NM) are vesicant agents that cause skin injury and blistering through complicated cellular events, involving DNA damage, free radical formation, and lipid peroxidation. The development of therapeutic approach...
Mitsugumin 53 (MG53, also TRIM72) is a muscle-enriched tripartite motif protein with a well-established role in acute membrane repair and cytoprotection in striated muscle and other stressed tissues. MG53 is a core component of cellular repair machin...
Background and Objectives: MG53 is a myokine/cardiokine involved in membrane repair. Some preclinical studies suggest that it is associated with insulin resistance. Metabolic syndrome (MS) is manifested by dyslipidemia, hypertension (HT), visceral ob...
Respiratory failure from progressive respiratory muscle weakness is the most common cause of death in amyotrophic lateral sclerosis (ALS). Defects in neuromuscular junctions (NMJs) and progressive NMJ loss occur at early stages, thus stabilizing and...
Background/Objective: A clinical need exists for more effective therapeutics and sustained drug delivery systems to promote ocular surface healing. This study tested the hypothesis that a novel biodegradable, thermoresponsive hydrogel loaded with the...
Alzheimer’s Disease (AD) is the most common neurodegenerative disease that involves neuronal cell death initiated by the breakdown of the plasma membrane. Amyloid beta (Aβ), a hallmark protein that contributes to AD pathogenesis, is known...
Skeletal muscle regeneration declines with age despite the persistence of satellite cells (muscle stem cells, MuSCs), suggesting that regenerative impairment reflects functional dysregulation rather than MuSC depletion. Increasing evidence identifies...
This paper describes a leaching-purifying-precipitation process to recover magnesium from serpentine acid-leaching solution and to synthesize high purity Mg(OH)2 and 4MgCO3·Mg(OH)2·4H2O. Fe, Al, and Cr in the leaching solution were remo...
Recent progress is reviewed. Recent developments include: (i) accumulation of evidence that electrochemical measurements of the Mg corrosion rate often do not agree with the steady state Mg corrosion rate as measured by weight loss; (ii) low Fe toler...
Pd/MgO, Pd/MgF2 and Pd/MgO-MgF2 catalysts were investigated in the reaction of CCl4 hydrodechlorination. All the catalysts deactivated in time on stream, but the degree of deactivation varied from catalyst to catalyst. The MgF2-supported palladium wi...
Due to its high hydrogen storage efficiency and safety, Mg/MgH2 stands out from many solid hydrogen storage materials and is considered as one of the most promising solid hydrogen storage materials. However, thermodynamic/kinetic deficiencies of the...
Under natural conditions, injured cells can be repaired rapidly through inherent biological processes. However, in the case of diabetes, cardiovascular disease, muscular dystrophy, and other degenerative conditions, the natural repair process is impa...
Magnesium oxide, generally applied as a filler in high-temperature cells (with an electrolyte melting point above 250 °C), was modified with magnesium fluoride to improve its mechanical and electrical properties. Samples containing 10 and 25 mol....
Nowadays, rechargeable batteries utilizing an S cathode together with an Mg anode are under substantial interest and development. The review is made from the point of view of materials engaged during the development of the Mg–S batteries, their...
In this study, the cohesive energy, interfacial energy, electronic structure, and bonding of Mg2Si (111)/Mg3Sb2 (0001) were investigated by using the first-principles method based on density functional theory. Meanwhile, the mechanism of the Mg3Sb2 h...
The in situ Mg-sialon in low-carbon MgO-C refractories was studied with respect to its oxidation behavior and mechanism at 1500 °C. The results indicated that the oxidation index and rate constant of low-carbon MgO-C refractories with Mg-sialon w...
Considering the advantage of safety and cost, designing a Mg–air battery with high capacity has been highly sought in recent years. However, self-corrosion and passivation of Mg anode critically reduce discharge performance, hindering the large...
Until recently, the standard method for RNA interference (RNAi)-based reverse genetics in plant parasitic nematodes (PPNs) was based on the use of long double-stranded RNA (dsRNA). This increased the chance of off-target gene silencing through intera...
In the field of orthopedics, magnesium (Mg) and magnesium-based composites as biodegradable materials have attracted fundamental research. However, the medical applications of magnesium implants have been restricted owing to their poor corrosion resi...
Corrosion resistant films with almost the same film thickness were prepared on the magnesium alloy AZ61 by steam coating at different vapor pressure and treatment times. The effect of the vapor pressure on the structures and the corrosion resistance...
Rechargeable magnesium ion batteries have recently received considerable attention as an alternative to Li- or Na-ion batteries. Understanding defects and ion transport is a key step in designing high performance electrode materials for Mg-ion batter...
In the present study, the PLC characteristic parameters and DSA mechanism of Al-(2.86~9.41) Mg alloy sheets were investigated during tensile testing at room temperature with a tensile rate of 1 × 10−3 s−1. On the basis of the soluti...
Phase constitution affects localized dissolution and mechanical retention in biodegradable magnesium alloys. We examined melt-spun nominal Mg65Ca28Au7 by X-ray diffraction before and after annealing at differential scanning calorimetry (DSC). Area ED...
The effect of magnesium (Mg) content on the microstructure, mechanical properties, and cytocompatibility of degradable Zn-0.5Mn-xMg (x = 0.05 wt%, 0.2 wt%, 0.5 wt%) alloys was investigated. The microstructure, corrosion products, mechanical propertie...
In this study, thin ribbons of amorphous Mg72Zn27Pt1 and Mg72Zn27Ag1 alloys with potential use in biomedicine were analyzed in terms of the crystallization mechanism. Non-isothermal annealing in differential scanning calorimetry (DSC) with five heati...
A series of Si-bearing MgAl2O4-spinels were synthesized at 1500–1650 °C and 3–6 GPa. These spinels had SiO2 contents of up to ~1.03 wt % and showed a substitution mechanism of Si4+ + Mg2+ = 2Al3+. Unpolarized Raman spectra were collected from polishe...
In order to study the influence of MgO refractory on inclusions during the steelmaking process, laboratory quasi-equilibrium experiments were performed in MgO crucibles at 1873 K. It was found that there were no MgO-containing inclusions formed when...
In this study, an Al–Mg alloy was fabricated by wire arc additive manufacture (WAAM), and the effect of Mg content on the microstructure and properties of Al–Mg alloy deposits was investigated. The effects on the deposition surface oxidat...
The aim of this work was to monitor the corrosion rate of the Mg72Zn24Ca4 and Zn87Mg9Ca4 alloys. The purity of the alloying elements was 99.9%. The melt process was carried out in an induction furnace. The melting process took place under the cover o...
Magnesium (Mg) is an essential mineral nutrient for human health and its deficiency associated with many diseases, including stroke, heart failure, and type 2 diabetes. Vegetables are an important source of dietary Mg for humans. In this study, we qu...
Controlling the size and morphology of primary and eutectic Mg2Si phase via modification and refinement (i.e., Ca and P addition) in Al-Mg2Si-based alloys containing higher percentages of Si and Mg is of great necessity to ensure their high performan...
The precipitation behavior of peak-aged Al–Zn–Mg alloys with various Zn/Mg ratios was investigated to clarify the relationship between aging microstructure and mechanical response using (scanning) transmission electron microscopy (STEM/TE...
Al–Zn–Mg alloys are widely recognized for their high strength-to-weight ratio, with the primary strengthening precipitates being the η/η′ and T/T′ phases. In this study, Al–Zn–Mg alloys with Zn/Mg molar rat...
The effect of the Zn/Mg ratio on microstructures, mechanical properties and corrosion performances of Al-Zn-Mg alloys was studied. Microstructures were characterized using the optical microscope (OM), scanning electron microscope (SEM) and transmissi...
Pb plays an important role in determining the morphologies and mechanical properties of the Mg2Si phase in Mg-2.5Si-xPb alloys. As the amount of Pb increases from 0.4 wt.% to 1 wt.%, the primary Mg2Si phase is refined during solidification. Its morph...
Heat energy storage systems were fabricated with the impregnation method using MgO and Mg(OH)2 as supporting materials and polyethylene glycol (PEG-6000) as the functional phase. MgO and Mg(OH)2 were synthesized from the salt Mg(NO3)·6H2O by p...
In this work, an MgIn2O4 (MIO) thin film transistor (TFT) with a bottom gate structure was fabricated. The MIO channel layer was deposited by RF sputtering using a single MgIn2O4 target. The performance of MIO TFT was highly related to oxygen vacanci...
The microstructural characteristics of cast Mg-x Sn (x = 0.5, 1.0, 2.5 wt.% and 4.0 wt.%) alloys were systematically evaluated, as well as the electrochemical behavior and discharge properties in 3.5 wt.% NaCl solution. The micro-morphological result...
Al-Mg alloys are characterized by permanent solid solution hardening and can additionally be work-hardened. The high mechanical properties of Al-Mg alloys with above-standard Mg content obtained after plastic deformation processes decrease over time....
The effects of different MgO contents (0.3 wt.%, 0.5 wt.%, 0.7 wt.% and 1.0 wt.%) on the microstructure and properties of Mg-1Zn-0.5Ca alloy (ZX) were systematically investigated to promote the clinical application of Mg alloys. The results showed th...
Aiming to investigate the role and mechanism of nano MgO on the hot compressive deformation behavior of Mg alloys, the Mg-3Zn-0.2Ca alloy (MZC, in wt%) and the 0.2MgO/Mg-3Zn-0.2Ca alloy (MZCM, in wt%) were investigated systematically in the temperatu...
The role of the Zn/Mg ratio in regulating microstructure, precipitation evolution and coarsening resistance in Al–Zn–Mg-based alloys was investigated by microhardness testing, scanning electron microscopy (SEM), and transmission electron...
For Al-Mg-Si alloys, cooling after homogenisation is a crucial step because the precipitation of the equilibrium β-Mg2Si phase determines the processing capabilities in subsequent steps, as well as the subsequent precipitation age hardening pote...
In order to obtain a high-performance heat-resistant Mg alloy during the rheo-rolling process, the electronic structure, elastic constants, binding energy and thermodynamic properties of the MgSnLa compounds were conducted by first-principle calculat...
In this work, the electrochemical and discharge properties of Mg-Zn-xSr (x = 0, 0.2, 0.5, 1, 2, and 4 wt.%) alloys used as anodes for Mg–air batteries were systematically studied via microstructure characterization, electrochemical techniques,...
In this paper, the effect of trace Sn on the precipitation behavior and mechanical properties of Al–Mg–Si alloys with different Mg/Si ratios aged at 180 °C was investigated using hardness measurements, a room-temperature tensile test,...
Two types of nanoclusters, Cluster (1) and Cluster (2), formed at around room temperature and 100 °C, respectively, affect the age-hardening behavior in Al-Mg-Si alloys. Formation of Cluster (1) during natural aging (NA) is more accelerated in th...
Magnesium is an essential element because of its many beneficial properties and advantages over other metals, including its lack of risk to people’s health and its reasonable cost. However, Mg has several disadvantages, one of which is its high...
The highly effective catalytic synthesis of 1,4-butynediol (BD) from the Reppe process is a fascinating technology in modern chemical industry. In this work, we reported the effects of the existential states of Mg species in the CuO/silica-magnesia c...
In this work, we focused on the bioactivity and antibacterial behavior of PLA-based electrospun fibers, efibers, reinforced with both MgO and Mg(OH)2 nanoparticles, NPs. The evolution of PLA-based efibers was followed in terms of morphology, FTIR, XR...
of 1,671