Skip to Content

331 Results Found

  • Article
  • Open Access
4 Citations
2,819 Views
13 Pages

Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1−yPO4 Cathode for Li-Ion Batteries

  • Mobinul Islam,
  • Ghulam Ali,
  • Muhammad Faizan,
  • Daseul Han and ,
  • Basit Ali,
  • Sua Yun,
  • Haseeb Ahmad and
  • Kyung-Wan Nam
  • + 3 authors+ 0 author

16 December 2023

A solid-solution cathode of LiCoPO4-LiNiPO4 was investigated as a potential candidate for use with the Li4Ti5O12 (LTO) anode in Li-ion batteries. A pre-synthesized nickel–cobalt hydroxide precursor is mixed with lithium and phosphate sources by...

(This article belongs to the Topic Batteries, Supercapacitors, Fuel Cells and Combined Energy/Power Supply Systems)
  • Article
  • Open Access
23 Citations
6,160 Views
13 Pages

22 June 2021

A spray-flame reaction step followed by a short 1-h sintering step under O2 atmosphere was used to synthesize nanocrystalline cubic Al-doped Li7La3Zr2O12 (LLZO). The as-synthesized nanoparticles from spray-flame synthesis consisted of the crystalline...

(This article belongs to the Special Issue Flame Synthesis and Characterization of Oxide Nanoparticles)
  • Article
  • Open Access
20 Citations
13,742 Views
14 Pages

7 November 2019

Lithium-rich layered oxide cathode materials of Li1.2Mn0.5100Ni0.2175Co0.0725O2 have been synthesized using metal salts with acetate and nitrate anions as precursors in glycerol solvent. The effects of the precursor metal salts on particle size, morp...

  • Article
  • Open Access
4 Citations
2,560 Views
17 Pages

Li–S batteries are positioned as a strong alternative for efficient energy storage due to their high theoretical energy density and their theoretical specific capacity (1675 mA h g−1) compared to current Li-ion batteries; however, their c...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
14 Citations
4,469 Views
16 Pages

Protective Spinel Coating for Li1.17Ni0.17Mn0.50Co0.17O2 Cathode for Li-Ion Batteries through Single-Source Precursor Approach

  • Andrey Shevtsov,
  • Haixiang Han,
  • Anatolii Morozov,
  • Jesse C. Carozza and ,
  • Aleksandra A. Savina,
  • Iaroslava Shakhova,
  • Nellie R. Khasanova,
  • Evgeny V. Antipov,
  • Evgeny V. Dikarev and
  • Artem M. Abakumov
  • + 5 authors+ 0 author

18 September 2020

The Li1.17Ni0.17Mn0.50Co0.17O2 Li-rich NMC positive electrode (cathode) for lithium-ion batteries has been coated with nanocrystals of the LiMn1.5Co0.5O4 high-voltage spinel cathode material. The coating was applied through a single-source precursor...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
19 Citations
4,238 Views
17 Pages

Preparation of Ni-Doped Li2TiO3 Using an Inorganic Precipitation–Peptization Method

  • Li-Yuan Zhang,
  • Yi Shui,
  • Ling-Ling Zhao,
  • Ping Zhu and ,
  • Wen-Yong Xu and
  • Yao-Hui You
  • + 1 author+ 0 author

26 October 2019

The precursor for a lithium-ion sieve is prepared using an inorganic precipitation-peptization method with titanium sulfate as the titanium source and lithium acetate as the lithium source. The effects of Ni2+ (Nickel ions) doping on the stability of...

  • Article
  • Open Access
634 Views
15 Pages

Breaking the Graphite Trilemma: An Isotropic Core–Shell Anode for High-Energy and Fast-Charging Li-Ion Batteries

  • Bing Kang,
  • Siqi Liu,
  • Liekai Liu,
  • Wenliang Hu and ,
  • Keju Ding and
  • Yongcheng Zou
  • + 1 author+ 0 author

13 October 2026

High-energy-density Li-ion batteries demand highly graphitized graphite anodes, yet elevated graphitization inevitably amplifies structural anisotropy, obstructing Li+ intercalation and compromising rate capability. To resolve this trilemma, we estab...

  • Article
  • Open Access
3 Citations
3,348 Views
10 Pages

21 March 2020

Dilithium manganese oxide (LMO) thin film was newly fabricated as an active material on a fluorinated-tin-oxide pre-coated glass electrode by a wet process. A stable LMO precursor solution was developed through the reaction of lithium and manganese a...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Article
  • Open Access
189 Views
31 Pages

28 October 2026

Olivine-type LiFePO4 is a promising cathode candidate for lithium-ion batteries. In this study, undoped and a series of Co-substituted LixCoᵧFePO4 (x = 0.85–1.00, y = 0–0.15) nanocomposites were synthesised by sol–gel auto-com...

(This article belongs to the Special Issue Advances in Gel Films (2nd Edition))
  • Article
  • Open Access
2 Citations
2,694 Views
13 Pages

The Conversion of Li2SnO3 Li-Ion Hybrid Supercapacitors from Pastes Containing LiCl-SnCl2 Liquid Precursors Using an Atmospheric-Pressure Plasma Jet

  • Hong-Kai Chen,
  • Heng-Min Chang,
  • Bo-Yan Hong,
  • Shuo-En Yu and ,
  • I-Chih Ni,
  • Chih-I Wu,
  • Cheng-Che Hsu,
  • I-Chun Cheng and
  • Jian-Zhang Chen
  • + 4 authors+ 0 author

We fabricate lithium tin-based oxide Li2SnO3 on carbon cloth from a gel-state precursor containing LiCl and SnCl2·2H2O using a nitrogen atmospheric-pressure plasma jet (APPJ). APPJ treatment provides both a high-temperature environment for the...

(This article belongs to the Section Composites Applications)
  • Review
  • Open Access
23 Citations
7,280 Views
28 Pages

Review on the Polymeric and Chelate Gel Precursor for Li-Ion Battery Cathode Material Synthesis

  • Mobinul Islam,
  • Md. Shahriar Ahmed,
  • Muhammad Faizan,
  • Basit Ali and ,
  • Md Murshed Bhuyan,
  • Gazi A. K. M. Rafiqul Bari and
  • Kyung-Wan Nam
  • + 2 authors+ 0 author

12 September 2024

The rapid design of advanced materials depends on synthesis parameters and design. A wide range of materials can be synthesized using precursor reactions based on chelated gel and organic polymeric gel pathways. The desire to develop high-performance...

(This article belongs to the Special Issue Applications of Gels in Energy Materials and Devices)
  • Article
  • Open Access
2,476 Views
14 Pages

Effects of Synthesis Conditions of Na0.44MnO2 Precursor on the Electrochemical Performance of Reduced Li2MnO3 Cathode Materials for Lithium-Ion Batteries

  • Ya Sun,
  • Jialuo Cheng,
  • Zhiqi Tu,
  • Meihe Chen and ,
  • Qiaoyang Huang,
  • Chunlei Wang and
  • Juntao Yan
  • + 2 authors+ 0 author

20 December 2023

Li2MnO3 nanobelts have been synthesized via the molten salt method that used the Na0.44MnO2 nanobelts as both the manganese source and precursor template in LiNO3-LiCl eutectic molten salt. The electrochemical properties of Li2MnO3 reduced via a low-...

  • Article
  • Open Access
1 Citations
2,648 Views
15 Pages

Molten Chlorides as the Precursors to Modify the Ionic Composition and Properties of LiNbO3 Single Crystal and Fine Powders

  • Nikolay A. Viugin,
  • Vladimir A. Khokhlov,
  • Irina D. Zakiryanova,
  • Vasiliy N. Dokutovich and
  • Boris D. Antonov

16 May 2022

Modifying lithium niobate cation composition improves not only the functional properties of the acousto- and optoelectronic materials as well as ferroelectrics but elevates the protonic transfer in LiNbO3-based electrolytes of the solid oxide electro...

(This article belongs to the Special Issue Electrochemical Processes, Materials and Devices)
  • Article
  • Open Access
13 Citations
4,527 Views
13 Pages

Exploring Vinyl Polymers as Soft Carbon Precursors for M-Ion (M = Na, Li) Batteries and Hybrid Capacitors

  • Afshin Pendashteh,
  • Brahim Orayech,
  • Jon Ajuria,
  • María Jáuregui and
  • Damien Saurel

13 August 2020

The viability of the sodium-ion batteries as a post-lithium storage technology is strongly tied to the development of high-performance carbonaceous anode materials. This requires screening novel precursors, and tuning their electrochemical properties...

(This article belongs to the Special Issue Novel Technologies for Metal-Ion and Metal Batteries)
  • Article
  • Open Access
17 Citations
6,389 Views
16 Pages

LiNbO3 Thin Films through a Sol–Gel/Spin-Coating Approach Using a Novel Heterobimetallic Lithium–Niobium Precursor

  • Francesca Lo Presti,
  • Anna Lucia Pellegrino,
  • Quentin Micard,
  • Guglielmo Guido Condorelli and ,
  • Samuel Margueron,
  • Ausrine Bartasyte and
  • Graziella Malandrino
  • + 2 authors+ 0 author

11 February 2024

Lithium niobate is a lead-free material which has attracted considerable attention due to its excellent optical, piezoelectric, and ferroelectric properties. This research is devoted to the synthesis through an innovative sol–gel/spin-coating a...

(This article belongs to the Special Issue Functional Coatings with Nanostructures: Synthesis, Characterizations and Applications)
  • Article
  • Open Access
6 Citations
3,503 Views
16 Pages

Enhancing the Electrochemical Stability of LiNi0.8Co0.1Mn0.1O2 Compounds for Lithium-Ion Batteries via Tailoring Precursors Synthesis Temperatures

  • Guanhua Zhang,
  • Hao Wang,
  • Zihan Yang,
  • Haoyang Xie and ,
  • Zhenggang Jia and
  • Yueping Xiong
  • + 1 author+ 0 author

1 August 2023

LiNi0.8Co0.1Mn0.1O2 (LNCMO) cathode materials for lithium-ion batteries (LIBs) were prepared by the hydrothermal synthesis of precursors and high-temperature calcination. The effect of precursor hydrothermal synthesis temperature on the microstructur...

  • Article
  • Open Access
626 Views
17 Pages

26 August 2026

The commercialization of sulfide-based all-solid-state batteries (ASSBs) is severely limited by the interfacial degradation between layered oxide cathodes and sulfide solid electrolytes, resulting in electrolyte decomposition, impedance growth, and r...

(This article belongs to the Section Lithium-Ion and Solid-State Batteries)
  • Article
  • Open Access
20 Citations
6,750 Views
12 Pages

5 August 2016

An amorphous complex precursor with uniform Mn/Ni cation distribution is attempted for preparing a nano-structured layered Li-rich oxide (Li1.2Mn0.6Ni0.2O2)cathode material, using diethylenetriaminepentaacetic acid (DTPA) as a chelating agent. The ma...

  • Article
  • Open Access
3 Citations
2,457 Views
17 Pages

17 May 2023

The phase structure of the precursor is crucial for the microstructure evolution and stability of Ni-rich cathode materials. Using sodium lactate as a green complexing agent, cathode electrode materials with different phase structures and unique core...

  • Feature Paper
  • Article
  • Open Access
2 Citations
1,353 Views
13 Pages

This study investigates the influence of various manganese sources—specifically MnCO3, Mn3O4, and MnO2—on the performance of lithium manganese iron phosphate (LMFP) synthesized through a combined spray-drying and chemical vapor deposition...

(This article belongs to the Special Issue Multiscale Co-Design of Electrode Architectures and Electrolytes)
  • Article
  • Open Access
4 Citations
2,521 Views
10 Pages

14 February 2025

This study investigates the effects of different titanium doping concentrations on the properties of iron phosphate precursors and the final lithium iron phosphate (LiFePO4) materials, aiming to optimize the structural and electrochemical performance...

(This article belongs to the Section I3: Energy Chemistry)
  • Article
  • Open Access
18 Citations
6,998 Views
10 Pages

8 September 2016

LiMnxFe1−xPO4/C material has been synthesized through a facile solid-state reaction under the condition of carbon coating, using solvothermal-prepared LiMnPO4 and LiFePO4 as precursors and sucrose as a carbon resource. XRD and element distribution an...

  • Communication
  • Open Access
19 Citations
7,312 Views
8 Pages

17 December 2019

Herein, thermal decomposition experiments of lithium peroxide (Li2O2) were performed to prepare a precursor (Li2O) for sacrificing cathode material, Li2NiO2. The Li2O2 was prepared by a hydrometallurgical reaction between LiOH·H2O and H2O2. Th...

(This article belongs to the Special Issue Next Generation Electrode Material)
  • Article
  • Open Access
9 Citations
5,700 Views
8 Pages

Particle Size Grading Strategy for Enhanced Performance of Lithium Iron Phosphate Cathode Materials

  • Puliang Li,
  • Yang Wang,
  • Liying Zhu,
  • Kun Zhang and ,
  • Weifang Liu,
  • Tao Chen and
  • Kaiyu Liu
  • + 2 authors+ 0 author

26 March 2025

Lithium iron phosphate (LiFePO4) is a promising cathode material for lithium-ion batteries (LIBs), but its low conductivity and poor rate performance limit its application in high-power devices. In this study, we employed a particle size grading stra...

(This article belongs to the Section Materials for Energy Applications)
  • Article
  • Open Access
6 Citations
1,708 Views
18 Pages

Efficient Preparation of Li2FeSiO4/C with High Purity and Excellent Electrochemical Performance in Li-Ion Batteries

  • Jinhai Cui,
  • Dezhi Chen,
  • Mengna Xie,
  • Yongheng Zhou and ,
  • Shuai Dong and
  • Wei Wei
  • + 1 author+ 0 author

10 February 2025

One method to enhance the electrochemical performance of carbon-coated Li2FeSiO4 cathode material in lithium-ion batteries is to produce an ideal Li2FeSiO4 precursor with minimal impurities. A novel precursor for Li2FeSiO4 (Li2O·FeCO3·C...

(This article belongs to the Special Issue Functional Nanomaterials for Energy and Environmental Sustainability)
  • Article
  • Open Access
8 Citations
3,375 Views
14 Pages

Simultaneous Li-Doping and Formation of SnO2-Based Composites with TiO2: Applications for Perovskite Solar Cells

  • Nagisa Hattori,
  • Kazuhiro Manseki,
  • Yuto Hibi,
  • Naohide Nagaya and ,
  • Norimitsu Yoshida,
  • Takashi Sugiura and
  • Saeid Vafaei
  • + 2 authors+ 0 author

14 May 2024

Tin oxide (SnO2) has been recognized as one of the beneficial components in the electron transport layer (ETL) of lead–halide perovskite solar cells (PSCs) due to its high electron mobility. The SnO2-based thin film serves for electron extracti...

(This article belongs to the Special Issue Low-Dimensional Structures for Smart Materials and Composites: Preparation, Properties and Applications (2nd Edition))
  • Article
  • Open Access
138 Views
19 Pages

Chelation-Mediated Multicomponent Co-Assembly Strategy for Controllable Fabrication and Characterization of Titanium-Based Lithium-Ion Sieve with Selective Lithium Adsorption and Separation

  • Xia-Zhong Zhang,
  • Guang-Ming Cheng,
  • Yu-Ling Qiao,
  • Xiong Tang and ,
  • Shu-Ying Liu,
  • Li-Yuan Zhang,
  • Ting-Xing Zhao and
  • Hong-Bo Li
  • + 3 authors+ 0 author

2 November 2026

To address the growing demand for efficient and green recovery of lithium resources, this study develops a co-assembly strategy mediated by Ti(IV)/Li+-polyacrylate complexes to fabricate mesoporous H2TiO3 lithium-ion sieve/carbon composites (H2TiO3@C...

(This article belongs to the Special Issue Process Simulation and Optimization for Wastewater Treatment and Purification)
  • Feature Paper
  • Article
  • Open Access
14 Citations
5,642 Views
13 Pages

Synthesis, Characterization, and Electrochemical Behavior of LiMnxFe(1−x)PO4 Composites Obtained from Phenylphosphonate-Based Organic-Inorganic Hybrids

  • Alessandro Dell’Era,
  • Mauro Pasquali,
  • Elvira Maria Bauer,
  • Stefano Vecchio Ciprioti and ,
  • Francesca A. Scaramuzzo and
  • Carla Lupi
  • + 1 author+ 0 author

30 December 2017

The synthesis of organic-inorganic hybrid compounds based on phenylphosphonate and their use as precursors to form LiMnxFe(1−x)PO4 composites containing carbonaceous substances with sub-micrometric morphology are presented. The experimental procedure...

(This article belongs to the Special Issue Sol-Gel Chemistry Applied to Materials Science)
  • Article
  • Open Access
13 Citations
4,953 Views
24 Pages

A functionally structured catalyst was explored for ethanol steam reforming (ESR) to generate H2. Aluminum lathe waste strips were employed as the structured catalytic framework. The mixed metal oxide (Li-Al-O) was formed on the surface of Al lathe w...

(This article belongs to the Special Issue Layered Double Hydroxide-Based Catalytic Materials for Sustainable Processes)
  • Article
  • Open Access
13 Citations
10,759 Views
17 Pages

One-Pot Synthesis of Graphene-Sulfur Composites for Li-S Batteries: Influence of Sulfur Precursors

  • James Guo Sheng Moo,
  • Ahmad Omar,
  • Tony Jaumann,
  • Steffen Oswald and ,
  • Juan Balach,
  • Sebastian Maletti and
  • Lars Giebeler
  • + 2 authors+ 0 author

27 December 2017

Lithium-sulfur (Li-S) batteries are postulated as next-generation electrochemical energy storage devices due to their increased storage capabilities. However, challenges persist from the polysulfide-shuttle effect at the cathode. Soluble sulfur-based...

(This article belongs to the Special Issue Functional Nanoporous Carbon-Based Materials)
  • Article
  • Open Access
13 Citations
2,122 Views
15 Pages

Synthesis of Porous Lithium Ion Sieve with High Purity for Li+ Adsorption

  • Jing Zhu,
  • Xiyun Yang,
  • Yongqiang Huang and
  • Rongzheng Yao

20 May 2025

With the depletion of solid lithium ore, extracting lithium from salt lake brine has become a critical focus for future endeavors. A four-step method was used to synthesize high-purity H1.6Mn1.6O4 for extracting Li+. Porous cubic Mn2O3 was hydrotherm...

  • Article
  • Open Access
5 Citations
3,124 Views
22 Pages

Phase Formation Study of Solid-State LLZNO and LLZTO via Structural, Thermal, and Morphological Analyses

  • Chengjian Li,
  • Frank Kern,
  • Lianmeng Liu,
  • Christopher Parr and ,
  • Andreas Börger and
  • Chunfeng Liu
  • + 1 author+ 0 author

28 October 2025

Garnet-type Li7La3Zr2O12 (LLZO) is a solid electrolyte candidate for ASSLBs, owing to its wide electrochemical window and intrinsic safety. Yet phase-pure LLZO remains difficult because secondary phases form, and the transition towards the tetragonal...

(This article belongs to the Special Issue Advances in Ceramics, 3rd Edition)
  • Article
  • Open Access
18 Citations
5,140 Views
13 Pages

Polyacrylonitrile-Derived Carbon Nanocoating for Long-Life High-Power Phosphate Electrodes

  • Eugene E. Nazarov,
  • Oleg A. Tyablikov,
  • Victoria A. Nikitina,
  • Evgeny V. Antipov and
  • Stanislav S. Fedotov

1 February 2023

Carbon-coating proved an efficient and reliable strategy to increase the power capabilities and lifetime of phosphate-based positive electrode materials for Li-ion batteries. In this work, we provide a systematic study on the influence of polyacrylon...

(This article belongs to the Collection Feature Papers for Applied Nano)
  • Article
  • Open Access
10 Citations
5,941 Views
15 Pages

Composite Cathodes Based on Lithium-Iron Phosphate and N-Doped Carbon Materials

  • Irina Stenina,
  • Danis Safikanov,
  • Polina Minakova,
  • Svetlana Novikova and ,
  • Tatiana Kulova and
  • Andrey Yaroslavtsev
  • + 1 author+ 0 author

26 November 2022

The effect of different nitrogen-doped carbon additives (carbon coating from polyaniline, N-doped carbon nanotubes, and N-doped carbon nanoparticles) on electrochemical performance of nanocomposites based on the olivine-type LiFePO4 was investigated....

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
17 Citations
5,859 Views
15 Pages

27 August 2019

Organic/inorganic hybrid membranes that are based on GTT (GPTMS-TMES-TPTE) system while using 3-Glycidoxypropyl-trimethoxysilane (GPTMS), Trimethyletoxisilane (TMES), and Trimethylolpropane triglycidyl ether (TPTE) as precursors have been obtained wh...

(This article belongs to the Special Issue Membranes for Electrolysis, Fuel Cells and Batteries)
  • Article
  • Open Access
166 Views
53 Pages

Valorization of Spent Lithium-Ion Battery Cathodes for the Production of Multimetallic Catalyst Precursors

  • Erasmo Arriola-Villaseñor,
  • Santiago Alexander Bedoya Betancur,
  • Alba Nelly Ardila Arias,
  • Melissa Arango Álvarez and
  • Misael Cordoba Arroyo

2 November 2026

Spent lithium-ion battery (LIB) cathodes were investigated as a multimetallic resource for catalyst precursor synthesis. Cathode material was leached under ultrasound using citric or sulfuric acid, with and without H2O2, to compare metal recovery, st...

(This article belongs to the Topic Converting and Recycling of Waste Materials)
  • Article
  • Open Access
3 Citations
4,236 Views
10 Pages

5 February 2019

A LiCoO2 thin film on a quartz glass substrate was fabricated by a wet process involving heat treatment of a precursor film spray-coated with an aqueous ammonia solution containing LiCH3COO and Co(CH3COO)2. The precursor film formed onto the substrat...

  • Article
  • Open Access
7 Citations
3,849 Views
11 Pages

Cryo-Mechanical Treatment and Hydrometallurgical Process for Recycling Li-MnO2 Primary Batteries with the Direct Production of LiMnPO4 Nanoparticles

  • Pier Giorgio Schiavi,
  • Flavia Carla dos Santos Martins Padoan,
  • Pietro Altimari and
  • Francesca Pagnanelli

3 August 2020

In this work, an innovative hydrometallurgical recycling route for the recovery of all the materials composing Li-MnO2 primary batteries was proposed. End-of-life batteries were mechanically treated in an innovative pilot plant where a cryogenic crus...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
42 Citations
10,087 Views
24 Pages

Atomic Layer Deposition of Lithium–Nickel–Silicon Oxide Cathode Material for Thin-Film Lithium-Ion Batteries

  • Maxim Maximov,
  • Denis Nazarov,
  • Aleksander Rumyantsev,
  • Yury Koshtyal and ,
  • Ilya Ezhov,
  • Ilya Mitrofanov,
  • Artem Kim,
  • Oleg Medvedev and
  • Anatoly Popovich
  • + 4 authors+ 0 author

8 May 2020

Lithium nickelate (LiNiO2) and materials based on it are attractive positive electrode materials for lithium-ion batteries, owing to their large capacity. In this paper, the results of atomic layer deposition (ALD) of lithium–nickel–silic...

(This article belongs to the Special Issue Advanced Nanomaterials for Li- and Na-Ion Batteries)
  • Article
  • Open Access
3 Citations
2,239 Views
11 Pages

27 November 2023

The paper describes a heterobimetallic mixed-ligand hexanuclear precursor [NaMn2(thd)4(OAc)]2 (1) (thd = 2,2,6,6-tetramethyl-3,5-heptadionate; OAc = acetate) that was designed based on its lithium homoleptic analogue, [LiMn2(thd)5], by replacing one...

(This article belongs to the Special Issue Exclusive Feature Papers on Molecular Structure)
  • Article
  • Open Access
5 Citations
4,508 Views
18 Pages

Structure and Magnetic Properties of AO and LiFePO4/C Composites by Sol-Gel Combustion Method

  • Kaimin Su,
  • Fang Yang,
  • Qian Zhang,
  • Huiren Xu and ,
  • Yun He and
  • Qing Lin
  • + 1 author+ 0 author

19 February 2023

LiFePO4 takes advantage of structure stability, safety and environmental friendliness, and has been favored by the majority of scientific researchers. In order to further improve the properties of LiFePO4, AO-type metal oxides (MgO and ZnO) and LiFeP...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
6 Citations
3,663 Views
16 Pages

Effect of Calcination Temperature on the Structural and Electrochemical Behaviour of Li-Based Cathode for Intermediate-Temperature SOFC Application

  • Sumarni Mansur,
  • Nurul Akidah Baharuddin,
  • Wan Nor Anasuhah Wan Yusoff,
  • Azreen Junaida Abd Aziz and
  • Mahendra Rao Somalu

18 July 2023

A new strategy to reduce the operating temperature of the solid oxide fuel cell (SOFC) is needed to foster the progress of developing high-performance and stable SOFC as a solution to the thermal stress and degradation of the cell components induced...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
25 Citations
7,238 Views
14 Pages

Fabrication of Li-Doped NiO Thin Films by Ultrasonic Spray Pyrolysis and Its Application in Light-Emitting Diodes

  • Víctor Hugo López-Lugo,
  • Manuel García-Hipólito,
  • Arturo Rodríguez-Gómez and
  • Juan Carlos Alonso-Huitrón

1 January 2023

The fabrication of NiO films by different routes is important to extend and improve their applications as hole-transporting layers in organic and inorganic optoelectronic devices. Here, an automated ultrasonic pyrolysis spray method was used to fabri...

(This article belongs to the Special Issue Nanostructured Materials for Energy Applications)
  • Article
  • Open Access
7 Citations
12,566 Views
12 Pages

25 October 2018

Iron catalyst precursors promoted with oxides of calcium, aluminum, and lithium were prepared by a fusion method. Using XRD analysis, it was found that catalyst precursors had a magnetite structure. Lithium oxide, which is dependent on the Fe2+/Fe3+...

  • Article
  • Open Access
5 Citations
3,747 Views
22 Pages

Martian Regolith Simulant-Based Geopolymers with Lithium Hydroxide Alkaline Activator

  • Jasper Vitse,
  • Jiabin Li,
  • Luc Boehme,
  • Rudy Briers and
  • Veerle Vandeginste

As humanity envisions the possibility of inhabiting Mars in the future, the imperative for survival in the face of its challenging conditions necessitates the construction of protective shelters to mitigate the effects of radiation exposure and the a...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
4 Citations
4,866 Views
8 Pages

21 August 2019

Herein, the lithium-rich material Li[Li0.2Mn0.56Ni0.16Co0.08]O2 is successfully prepared by a sucrose-assisted gel method. With the assistance of sucrose, Li[Li0.2Mn0.56Ni0.16Co0.08]O2 precursors can be uniformly dispersed into sticky sucrose gel wit...

  • Article
  • Open Access
1 Citations
1,263 Views
12 Pages

29 April 2026

Limited ionic conductivity and unstable interfaces, primarily caused by poor solid–solid contact, pose significant challenges to the stable cycling of solid-state batteries. In this study, an interfacial in situ polymerization strategy is propo...

(This article belongs to the Topic Advanced Energy Materials, Devices, and Intelligent Battery Management Systems)
  • Article
  • Open Access
6 Citations
2,940 Views
13 Pages

Yeast-Derived Sulfur Host for the Application of Sustainable Li–S Battery Cathode

  • Zhanhui He,
  • Xinyi Dou,
  • Weilin Liu,
  • Luxian Zhang and ,
  • Laixi Lv,
  • Jiehua Liu and
  • Fancheng Meng
  • + 2 authors+ 0 author

A porous carbon structure (PCS) is considered as an ideal electrode material for lithium–sulfur (Li–S) batteries, owing to its flexible texture, large surface area, and high electrical conductivity. In this work, we use food-grade yeast as the carbon...

(This article belongs to the Section Energy Storage System Aging, Diagnosis and Safety)
  • Article
  • Open Access
56 Citations
10,943 Views
14 Pages

A Facile Synthesis of Hexagonal Spinel λ-MnO2 Ion-Sieves for Highly Selective Li+ Adsorption

  • Fan Yang,
  • Sichong Chen,
  • Chentao Shi,
  • Feng Xue and ,
  • Xiaoxian Zhang,
  • Shengui Ju and
  • Weihong Xing
  • + 2 authors+ 0 author

17 May 2018

Ion-sieves are a class of green adsorbent for extraction Li+ from salt lakes. Here, we propose a facile synthesis of hexagonal spinel LiMn2O4 (LMO) precursor under mild condition which was first prepared via a modified one-pot reduction hydrothermal...

(This article belongs to the Special Issue Transport of Fluids in Nanoporous Materials)
  • Article
  • Open Access
10 Citations
6,280 Views
19 Pages

Electrochemical Performance of Layer-Structured Ni0.8Co0.1Mn0.1O2 Cathode Active Materials Synthesized by Carbonate Co-Precipitation

  • Byung Hyun Park,
  • Taeseong Kim,
  • Hyerim Park,
  • Youngku Sohn and ,
  • Jongmin Shin and
  • Misook Kang
  • + 1 author+ 0 author

14 October 2022

The layered Ni-rich NiCoMn (NCM)-based cathode active material Li[NixCo(1−x)/2Mn(1−x)/2]O2 (x ≥ 0.6) has the advantages of high energy density and price competitiveness over an LiCoO2-based material. Additionally, NCM is beneficial in...

(This article belongs to the Special Issue Synthesis of Nanomaterials as Electrocatalysis, Photocatalysis and Thermal Catalysis)

of 7