The commercialization of the Direct Methanol Fuel Cell (DMFC) is limited due to the high cost and low efficiency of the electrocatalysts. In this context, the development of new electrocatalysts able to efficiently oxidize the methanol and to have at...
A new electrochemical method to synthesize mesoporous nanowires of alloys has been developed. Electrochemical deposition in ionic liquid-in-water (IL/W) microemulsion has been successful to grow mesoporous CoPt nanowires in the interior of polycarbon...
In this paper, 3 µm length and 200 nm diameter CoPt nanowire arrays (NWs) with different Co contents were prepared by electrodeposition at a controlled potential from an aqueous hexachloroplatinate solution. The synthesis occurred at two differ...
In polymer electrolyte membrane fuel cells (PEMFCs), substantial efforts have been made to focus on Pt and Pt alloy catalysts to enhance their catalytic performance. However, these catalysts still fail to meet practical requirements and existing PtCo...
Surface and sub-surface atomic configurations are critical for catalysis as they host the active sites governing electrochemical processes. This study employs density functional theory (DFT) calculations and Monte Carlo simulations combined with the...
The CO-tolerance mechanism of a carbon-supported Pt-Fe alloy catalyst with two atomic layers of stabilized Pt-skin (Pt2AL–PtFe/C) was investigated, in comparison with commercial Pt2Ru3/C (c-Pt2Ru3/C), by in situ attenuated total reflection Fourier tr...
A novel composite photocatalyst was synthesized by loading 5 wt % of platinum cobalt alloy on 3C-SiC nanowires and powder (Pt-Co-SiC) respectively via a simple polyol reduction method. Pt-Co-SiC were comprehensively characterized by SEM, HRTEM, XRD,...
In this work, MoS2 microspheres/PtCo-alloy nanoparticles (MoS2/PtCo-alloy NPs) were composited via a novel and facile process which MoS2 is functionalized by poly (N-vinyl-2-pyrrolidone) (PVP) and self-assembled with PtCo-alloy NPs. This new composit...
Limited research has been undertaken regarding the homogeneity of CoCrPtB alloy billets. A CoCrPtB alloy was processed through casting and vacuum hot pressing. This investigation delved into the interconnection between the secondary dendrite arm spac...
Ammonia nitrogen is a key indicator for evaluating drinking water quality, and its accurate determination is of great significance for environmental monitoring and public health protection. In this work, a self-supported electrochemical sensor based...
It is a great challenge to prepare efficient and stable electrocatalysts for hydrogen evolution (HER) using non-precious metals. In this study, a series of PtCo/Ti3C2Tx-Y (Y: 16, 32, and 320, Y indicates the quality of Co(NO3)2) catalysts were synthe...
The membrane electrode assembly (MEA) encompassing the polymer electrolyte membrane (PEM) and catalyst layers are the key components in Polymer Electrolyte Membrane Fuel Cells (PEMFCs). The cost of the PEMFC stacks has been limiting its commercializa...
In order to reduce the impedance and improve in vivo neural recording performance of our developed Michigan type silicon electrodes, rough-surfaced AuPt alloy nanoparticles with nanoporosity were deposited on gold microelectrode sites through electro...
Bimetallic colloidal CoPt nanoalloys with low platinum content were successfully synthesized following a modified polyol approach. Powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and...
Alloys of platinum and lanthanides present a remarkable activity for the oxygen reduction reaction—both in the form of extended surfaces and nanoparticulate catalysts. Co-sputter-deposited thin film catalysts based on platinum and gadolinium sh...
This study investigates reduced graphene oxide (rGO)-supported bimetallic M–Pt (M = Co, Ni, Cu) alloy nanoparticles as electrocatalysts for the hydrogen evolution reaction (HER) in alkaline media. Monometallic Pt and bimetallic M–Pt nanop...
Since trace amounts of CO in H2 gas produced by steam reforming of methane causes severe poisoning of Pt-based catalysts in polymer electrolyte membrane fuel cells (PEMFCs), research has been mainly devoted to exploring CO-tolerant catalysts. To test...
The present work aims to investigate the feasibility of utilizing Pt and PtCo alloy ultrathin films as hydrogen gas sensors in order to reduce the cost of the hydrogen gas sensors by using low-cost metallic materials. In this study, ultrathin Pt and...
The controllable synthesis of carbon nanofibers (CNF) and composites based on CNF (Metals/CNF) is of particular interest. In the present work, the samples of CNF were produced via ethylene decomposition over Co-Pt (0–100 at.% Pt) microdispersed...
A novel class of quaternary intermetallic alloys based on CoPt is investigated in view of their interesting magnetic properties induced by the presence of hard magnetic L10 phase. A Co48Pt28Ag6B18 alloy has been prepared by rapid solidification from...
Increasing the loading density of nanoparticles on carbon support is essential for making Pt-alloy/C catalysts practical in H2-air fuel cells. The challenge lies in increasing the loading while suppressing the sintering of Pt-alloy nanoparticles. Thi...
The effect of minor platinum alloying on the microstructure, phase composition, oxidation and corrosion resistance of Al0.25CoCrFeNi high-entropy alloy (HEA) has been studied. It was observed that Pt does not segregate as a separate phase, but it is...
The electrochemical nitrate reduction reaction (NO3RR) represents a promising strategy for wastewater remediation and sustainable ammonia (NH3) production. However, its practical application is hindered by low selectivity and competition from the hyd...
CoPt alloys with Pt contents from 15 to 90% were prepared using low-cost electrochemical deposition. Different samples were synthesized from electrochemical baths at pH = 2.5 and 5.5 in a solution with and without saccharin as an additive. The morpho...
The service life of catalysts is a key aspect limiting the commercial development of proton exchange membrane fuel cells (PEMFCs). In this paper, a one-dimensional degradation model of a Pt-Co alloy catalyst in the cathode catalytic layer (CCL) of a...
The microstructure, phase composition, and high-temperature oxidation behavior of Al0.5CoCr0.5NiPt0.1 and AlCoCr0.5NiPt0.1 multi-principal element alloys (MPEAs) at 1100 °C in air were investigated. Depending on the content of aluminum, the micro...
This paper presents the results of an investigation into rapidly quenched Fe-based alloys with the chemical formula: Fe61Co10B20W1Y8−xPtx (where x = 3, 4, 5). In these alloys, a small quantity of Pt was added, and the Y content was reduced conc...
Surface segregation in metal alloys critically determines their electrocatalytic performance, yet how chemisorbed oxygen alters segregation behavior under reaction conditions remains poorly understood. Using density functional theory, we quantify the...
The article reveals for the first time the features of nanoparticle morphology, phase compositions, and their changes when heating FePt and CoPt nanoalloys. Nanoparticles were obtained by co-reduction of precursor solution mixtures with hydrazine hyd...
The aim of this work was high-temperature synthesis of PtPdCoNiCu/C nanoparticles with high-entropy alloy (HEA) structure as catalysts for oxygen reduction reaction. The materials were synthesized using a highly dispersed PtPd/C support, which was im...
Ethylene glycol oxidation (EGOR) transforms waste plastic-derived chemicals into high-value products, representing an upcycling strategy that enhances resource efficiency. Pt-based electrocatalysts have shown promise for oxidizing ethylene glycol (EG...
In order to realize a perpendicular exchange bias for applications, a robust and tunable exchange bias is required for spintronic applications. Here, we show the perpendicular exchange energy (PEE) in the TbxCo100−x/Cu/[Co/Pt]2 heterostructures. The...
The vision to manipulate and control magnetism with light is driven on the one hand by fundamental questions of direct and indirect photon-spin interactions, and on the other hand by the necessity to cope with ever growing data volumes, requiring rad...
Supported Pt-based catalysts have been identified as highly selective catalysts for CO oxidation, but their potential for applications has been hampered by the high cost and scarcity of Pt metals as well as aggregation problems at relatively high tem...
In this study, we report the influence of the Pt concentration in CoxPt100−x alloys on the catalytic activity of the alloys for 4-nitrophenol (4-NP) reduction. More precisely, a series of CoxPt100−x alloys with a Pt concentration ranging...
Structurally ordered intermetallic structure is an efficient catalyst design strategy to significantly improve the catalytic performance of Pt alloy electrocatalysts for oxygen reduction reaction in fuel cells. However, a high structural ordering deg...
We describe assemblages of platinum-group minerals (PGM) and associated PGE–Au phases found in alluvium along the River Bolshoy Khailyk, in the western Sayans, Russia. The river drains the Aktovrakskiy ophiolitic complex, part of the Kurtushibi...
Carbon-supported bimetallic Pt-Co cathode catalysts have been previously identified as higher activity alternatives to conventional Pt/C catalysts for fuel cells. In this work, a series of Pt-Co/C catalysts were synthesized using electroless depositi...
This review extensively discusses current developments in bimetallic nanoparticle–GO and bimetallic nanoparticle–MOF nanocomposites as potential catalysts for HER, along with their different synthesis methodologies, structural characteris...
The development and commercialization of direct ethanol fuel cells requires active and durable electro-catalysts towards the ethanol oxidation reactions (EOR). Rational composition and morphology control of Pt-based alloy nanocrystals can not only en...
Nanoalloys with anisotropic morphologies of branched and porous internal structures show great promise in many applications as high performance materials. Reported synthetic approaches for branched alloy nanostructures are, however, limited by the sy...
Binary metallic alloy nanomaterials (NMs) have received significant attention because of their widespread application in photoelectrocatalysis, electronics, and engineering. Although various synthetic methods have been adopted to prepare binary alloy...
In order to explore novel light-weight Co-Nb-based superalloys with excellent performance, we studied the effects of alloying elements including Sc, Ti, V, Cr, Mn, Fe, Ni, Y, Zr, Mo, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir and Pt on the structural stab...
In this research, a nanoporous platinum film is synthesized using the dealloying method. Platinum–copper (Pt–Cu) alloy films with a thickness of approximately 50 nm are prepared on glass using the magnetron-co-sputtering technique. In ord...
The compositions and surface facets of platinum (Pt)-based electrocatalysts are of great significance for the development of direct alcohol fuel cells (DAFCs). We reported an approach for preparing ultrathin PtnCo100−n nanowire (NW) catalysts w...
The adsorption of crotonaldehyde on Cu-Pt alloy surfaces was characterized by density functional theory (DFT). Two surfaces were considered: Cu2Pt/Cu(111) and Cu3Pt/Cu(111). It was determined that the presence of Pt on the surface, even when isolated...
Pt–Ni nanostructures are a class of important electrocatalysts for polymer electrolyte membrane fuel cells. This work reports a systematic study on the reaction mechanism of the formation of Pt–Ni seed-core-frame nanostructures via the se...
This study explores the development of core–shell electrocatalysts for efficient glycerol oxidation in alkaline media. Carbon-supported M@Pt/C (M = Co, Ni, Sn) catalysts with a 1:1 atomic ratio of metal (M) to platinum (Pt) were synthesized usi...
We report on an optimized, scalable solution-phase synthetic procedure for the fabrication of fine-tuned monodisperse nanostructures (Pt(NiCo), PtNi and PtCo). The influence of different solute metal precursors and surfactants on the morphological ev...
The initial performance and decay trends of polymer electrolyte membrane fuel cells (PEMFC) cathodes with Pt3Co catalysts of three mean particle sizes (4.9 nm, 8.1 nm, and 14.8 nm) with identical Pt loadings are compared. Even though the cathode base...
of 4