Cu-exchanged aluminosilicate zeolites have been intensively studied for the selective oxidation of methane to methanol via a chemical looping manner, while the nature of active Cu-oxo species for these catalysts is still under debate. This study inqu...
Novel wide-bandgap ZnO, BeO, and ZnBeO materials have recently gained considerable interest due to their stellar optoelectronic properties. These semiconductors are being used in developing high-resolution, flexible, transparent nanoelectronics/photo...
Amperometric and potentiometric probes were employed for the detection and characterization of reactive sites on the 2098-T351 Al-alloy (AA2098-T351) using scanning electrochemical microscopy (SECM). Firstly, the probe of concept was performed on a m...
Previous investigations on the dimerization of n-butenes over Ni-containing Al-MCM-41/ZSM-5 mixed-phase catalysts have shown a correlation between the conversion and the Ni/(Al + Ni) ratio as well as between the conversion and the metal–support inter...
Aluminum silicate based mineral “Sillimanite” (Al2SiO5) is important in the industrial preparation of aluminum-silicon alloys and cement. In the present study classical pair potential simulations are used to examine the intrinsic defect p...
The electronic structures of the luminescent center ions Cr3+ and Fe3+ in the deep red phosphors LiAl5O8:Cr3+, α-Al2O3:Cr3+, and γ-LiAlO2:Fe3+ were calculated by the DV-Xα method, in which the local distortion induced by the replace...
Almandine garnet has received considerable amounts of interest due to its application in manufacturing and engineering processes. Defect processes, Fe-ion diffusion pathways, and promising dopants on the Al, Fe, and Si sites are examined using classi...
For glycolic acid oligomers (GAO): l-lactic acid oligomers (LAO) mixtures, as an example, it was shown that the nature of the active sites of the catalysts significantly affect the depolymerization process. So, ZnO, which has mainly basic sites, lead...
Naturally occurring lithium-rich α-spodumene (α-LiAlSi2O6) is a technologically important mineral that has attracted considerable attention in ceramics, polymer industries, and rechargeable lithium ion batteries (LIBs). The defect chemistry and dopan...
Metal oxides (MOs) having Mg and Al with Mg/Al ratios of 1, 2, 3, and 4 were synthesized via calcination of the layered double hydroxides (LDH). The X-ray diffraction analysis revealed that all the MO consisted of periclase (MgO) crystallite with com...
The O-methylation of catechol is an effective method for the industrial production of guaiacol used as an important chemical. However, the low catechol conversion and poor catalyst stability are the most critical issues that need to be addressed. Her...
The Si/Al ratio and confinement effects of zeolite framework on energetics and vibrational frequencies of pyridine and 4,4′-bipyridine adsorbed on Brønsted acid sites in the straight channel of H-ZSM-5 are investigated by DFT calculation...
Wollastonite (CaSiO3) is an important mineral that is widely used in ceramics and polymer industries. Defect energetics, diffusion of Ca ions and a solution of dopants are studied using atomistic-scale simulation based on the classical pair potential...
Bromus japonicus is a common monocot weed that occurs in major winter wheat fields in the Huang–Huai–Hai region of China. Pyroxsulam is a highly efficient and safe acetolactate synthase (ALS)-inhibiting herbicide that is widely used to co...
River water samples between August 2017 (wet season) and March 2018 (dry season) from the Mun River Basin in northeast Thailand were collected and their dissolved heavy metals concentrations (Al, Mn, Fe, Cu, Zn, and Ba) were measured. Compared with i...
Rhanterium epapposum Oliv. is a perennial medicinal shrub growing mainly in desert habitats in the Arabian Peninsula. In western Saudi Arabia, the remaining few populations of this species are exposed to many threats, including overcutting, overgrazi...
Rice is a staple food for more than half of the global population due to its food security and sustainable development. Weeds compete with crops for sunlight and indispensable nutrients, affecting the yield and quality of crops. Breeding herbicide-to...
Novel visible-light responded aluminosilicophosphate-5 (SAPO-5)/g-C3N4 composite has been easily constructed by thermal polymerization for the mixture of SAPO-5, NH4Cl, and dicyandiamide. The photocatalytic activity of SAPO-5/g-C3N4 is evaluated by d...
Pre-plastic deformation (PPD) treatments on bulk metallic glasses (BMGs) have previously been shown to be helpful in producing multiple shear bands. In this work, the applicability of the PPD approach on BMGs with different Poisson’s ratios was...
Phosphorus (P) discharge from onsite wastewater treatment systems (OWTSs) poses a significant threat to water quality, contributing to eutrophication in nutrient-sensitive aquatic environments. In treated effluents, P predominantly exists as orthopho...
The purpose of this work was to consider the decolorization efficiency of reactive yellow 160 (Ry-160) dye utilizing cobalt aluminum oxide (AlCo2O4)-anchored Multi-Walled Carbon Nanotubes (AlCo2O4/MWCNTs) nanocomposites as catalysts for the first tim...
Tree spatial distribution patterns such as random, regular, and clustered play a crucial role in numerical simulations of carbon and water cycles and energy exchanges between forest ecosystems and the atmosphere. An efficient approach is needed to ch...
Ruthenium-based catalysts were prepared through a deposition–precipitation approach, taking beta zeolites with Si/Al ratios of 12.5, 18.5, and 150, respectively, as supports, and 1–3 wt% loadings of metal. Their activation was performed i...
Investigating deserted medieval castles and villages in remote rural areas paired with a scarcity of meaningful written sources is a challenging task that can be significantly enhanced by the use of non-invasive archaeological prospection methods. Fu...
This paper explores the thermal and catalytic pyrolysis of HFC-134a over γ-Al2O3 calcined at temperatures of 550 °C (A550), 650 °C (A650), 750 °C (A750), and 850 °C (A850). The physicochemical properties of catalysts were studied through thermogravim...
The iron titanium oxide ilmenite (FeTiO3) is a technologically and economically important mineral in the industrial preparation of titanium-based pigments and spintronic devices. In this study, atomistic simulation techniques based on classical pair...
Tetrasodium silicate (Na4SiO4) has emerged as a promising candidate for battery applications due to its favorable ionic transport properties. Atomic-scale simulations employing classical pair potentials have elucidated the defect mechanisms and ion m...
The MgAl2O4-spinel has wide applications in various industries and in geosciences. It shows a significant inter-site Mg-Al cation exchange (denoted by the inversion parameter x), which modifies structural features, such as the unit-cell parameters an...
Platinum- and/or palladium-containing silica-based supports were applied for the selective catalytic reduction of NOx with hydrogen (H2-SCR-DeNOx). To obtain enhanced activity and N2 selectivity below 150 °C, we varied the type and loading of nob...
Two copies of unspliced human immunodeficiency virus (HIV)-1 genomic RNA (gRNA) are preferentially selected for packaging by the group-specific antigen (Gag) polyprotein into progeny virions as a dimer during the late stages of the viral lifecycle. E...
Tetradecahydrophenazine (14HP) is a nitrogen-containing heterocycle compound with a high content of hydrogen that can be released during its dehydrogenation to phenazine (P). The high stability of the 14HP/P pair and relatively low dehydrogenation te...
High-pressure single-crystal synchrotron X-ray diffraction data for galenobismutite, PbBi2S4 collected up to 20.9 GPa, were fitted by a third-order Birch-Murnaghan equation of state, as suggested by a FE-fE plot, yielding V0 = 697.4(8) Å3, K0 =...
Amaranthus palmeri is the most prominent invasive weed in agricultural land from North America, partly due to its propensity to evolve resistance to multiple herbicide sites of action. In the last two decades, reports of this species have increased t...
Infantile onset hereditary spastic paralysis (IAHSP) is a rare neurological disease diagnosed in less than 50 children worldwide. It is transmitted with a recessive pattern and originates from mutations of the ALS2 gene, encoding for the protein alsi...
Three methods to estimate the presence of ground surface stones from publicly available Airborne Laser Scanning (ALS) point clouds are presented. The first method approximates the local curvature by local linear multi-scale fitting, and the second me...
A probabilistic seismic hazard assessment in terms of peak ground acceleration (PGA) and spectral acceleration (SA) values, for both 10% and 5% probability of exceedance in 50 years, has been performed for the United Arab Emirates, Qatar, and Bahrain...
Zinc is an essential element for plant nutrition, but it may cause toxicity depending on its bioavailability and potential transformation in soil. In vineyard soils, high concentrations of Zn are usually found, mainly due to agricultural practices. H...
To characterize the trace-element characteristics of chrysoberyl, we studied twenty-six chrysoberyl samples from various localities by using laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS), photoluminescence (PL),...
The objective of the proposed work was to investigate the electrical performance of a 250 µm-thick 4H-SiC p-n junction detector after irradiation with DT neutrons (14.1 MeV energy) at high temperature (500 °C). The results showed that the c...
In this work, we use density functional theory to investigate the electronic structure of poly(3,4-ethylenedioxythiophene) (PEDOT) oligomers with co-located AlCl4− anions, a promising combination for energy storage. The 1980s bipolaron model re...
Reference of Earth-observing satellite sensor data to a common, consistent radiometric scale is an increasingly critical issue as more of these sensors are launched; such consistency can be achieved through radiometric cross-calibration of the sensor...
Compaction quality control in earthworks and pavements still relies mainly on density-based acceptance referenced to laboratory Proctor tests, which are costly, time-consuming, and spatially sparse. Lightweight dynamic cone penetrometer (LDCP) provid...
In this study, we compared the accuracies of above-ground biomass (AGB) estimated by integrating ALOS (Advanced Land Observing Satellite) PALSAR (Phased-Array-Type L-Band Synthetic Aperture Radar) data and TanDEM-X-derived forest heights (TDX heights...