In order to improve the seawater corrosion resistance of Inconel 718 superalloy, a La2Zr2O7/NiCoCrAlY thermal barrier coating corrosion resistant to 3.5 wt.% NaCl aqueous solution was prepared by laser cladding on Inconel 718 superalloy. X-ray diffra...
The objective of this study was to improve the surface properties, hardness, wear resistance and electrochemical corrosion resistance of #45 steel. To this end, Ni–P–ZrO2–CeO2 composite coatings were prepared on the surface of #45 s...
Y(1−x)/2Ta(1−x)/2ZrxO2 coatings with 0 to 44 mol% ZrO2 were synthesized by sputtering. Phase-pure M’-YTaO4 coatings were obtained at a substrate temperature of 900 °C. Alloying with ZrO2 resulted in the growth of M’ along with t-Zr(Y,Ta)O2 for ≤15 mo...
In this paper, an alumina-zirconia (Al2O3-ZrO2) nanolaminate dielectric was fabricated by spin-coating and the performance was investigated. It was found that the properties of the dielectric can be adjusted by changing the content of Al2O3/ZrO2 in n...
In the present work, the surface of a biodegradable Mg alloy was modified to create porous diatomite biocoatings using the method of micro-arc oxidation. The coatings were applied at process voltages in the range of 350–500 V. We have studied t...
Advanced thermal barrier coatings (TBCs) are essential for improving the efficiency and performance of gas turbine engines. Increasing engine operating temperatures and harsh service environments are pushing the current industry-standard 8 wt% yttria...
This research paper presents the fabrication of epoxy coatings along with the hybrid combination of SiO2 and ZrO2. The epoxy resin is incorporated with SiO2 as the primary pigment and ZrO2 as the synergist pigment. The study delves into the adhesion,...
TiO2 was doped into Er2O3-stabilized ZrO2 (ErSZ) to obtain desirable properties for thermal barrier coating (TBC) applications. The phase composition, thermal conductivity, and mechanical properties of TiO2-doped ErSZ were investigated. ErSZ had a no...
An easy approach is described for the preparation of ZrO2-coated Y2O3 nanopowder from a solution of zirconium nitrate with commercial Y2O3 nanopowder. The evolution process of the ZrO2 coating layer upon calcination, such as the phase and microstruct...
Li2ZrO3-coated and Al-doped micro-sized monocrystalline LiMn2O4 powder is synthesized through solid-state reaction, and the electrochemical performance is investigated as cathode materials for lithium-ion batteries. It is found that Li2ZrO3-coated Li...
In this study, to further improve the performance of micro-arc oxidation (MAO) coatings, ZrO2 nanoparticles at different concentrations were added to the electrolyte. The effects of ZrO2 concentration on the microstructure, mechanical properties and...
The combination of various oxide ceramics in layered and functionally graded composites allows for the development of novel materials, including for high-temperature applications. This study demonstrates the possibility of obtaining a thick ZrO2-base...
Herein, ZrO2 and Si + ZrO2 composite coatings on AZ91D alloys are deposited at a constant voltage of 8 kV and 1 Å/s deposition rate using the electron beam physical vapor deposition (EBPVD) method. Further, the samples are examined for surface...
Yb2O3-Gd2O3-Y2O3 co-doped ZrO2 (YGYZ) is considered to be a promising material in thermal barrier coating (TBC) applications. In this study, 2Yb2O3-2Gd2O3-6Y2O3-90ZrO2 (mol.%) (10YGYZ) feedstock candidates for air plasma spraying (APS) were prepared...
Functional gradient materials (FGM) have many excellent properties, and high-performance gradient coating exhibits good prospective application. In this paper, the nano-grain Ni/ZrO2 gradient coating was prepared by double pulse electrodeposition (BP...
In this paper, the molecular sieve NaZSM-5 was modified with zirconium dioxide (ZrO2) by a hydrothermal coating process and other methods. By comparing the effects of the crystal phase structure of ZrO2 and the compositing method on the physicochemic...
CoCrFeMnNi-XZrO2 (X is a mass percentage, X = 1, 3, 5, and 10) high-entropy alloy composite coatings were successfully prepared on 0Cr13Ni5Mo martensitic stainless steel substrates using laser cladding technology. The phase composition, microstructur...
Ions of Gd3+ and Yb3+ have radii similar to those of Zr4+, enabling them to form limited solid solutions in the ZrO2 lattice through substitution. After solid solution formation, oxygen vacancy defects and complex defect aggregates are generated, whi...
Polyether ether ketones (PEEK) and polydimethylsiloxanes (PDMS) are widely used biomaterials; however, their susceptibility to microbial colonization remains a limitation in clinical applications. This study comparatively evaluated biofilm formation...
This study investigates the fabrication of a ZrSiO4-based coating (ZSO coating) on substrate surfaces using atmospheric plasma spraying (APS) technology, with ZrSiO4 as the feedstock material. A comprehensive characterization of the coating systems w...
ZrO2 ceramics are currently used in a broad range of industrial applications. However, the machining of post-sintered ZrO2 ceramic is a difficult task, due to its high hardness and brittleness. In this study, micro-milling of ZrO2 with two kinds of d...
With the rising popularity of electric vehicles and the widespread deployment of energy storage power stations. The demand for high-energy-density lithium-ion batteries is increasing day by day. Lithium-rich layered materials are among the most promi...
The journal retracts the article “Hybrid ZrO2/Cr2O3 Epoxy Nanocomposites as Organic Coatings for Steel” [...]
A hybrid material of polystyrene (PS)–ZrO2 was developed by the sol–gel technique and deposited by spin-coating on AM60 and AM60–AlN nanocomposite surfaces to enhance corrosion resistance in marine environments.
Epoxy-trimetallic oxide (epoxy-TMO) coatings of ZrO2:TiO2:ZnO at different compositions were synthesized and used to protect a stainless steel surface. The different TMO compositions were synthesized using the ball-milling method and later dispersed...
In this work, the influences of substrate characteristics on the deformation and residual stress in ZrO2 coatings deposited on one side carbon steel, 316 stainless steel and 304 stainless steel are analysed via the image relative method. Based on the...
In this study, thermal stresses analysis of ZrO2 insulation coatings on Cr-Ni substrate during the cooling process was investigated. A transient thermal analysis was performed using finite element method (FEM) via ANSYS software. The temperature vers...
Ti owes its clinical durability to a protective passive oxide film; however, repetitive toothbrushing and fluoride exposure may disrupt this interface and increase its susceptibility to tribocorrosion. This in vitro study investigated the electrochem...
This study investigated the corrosion resistance and mechanical properties of Mg-2Zn-0.46Y-0.5Nd (wt.%) alloy plates and screws with fluorinated coatings and atomic layer deposition (ALD)-derived zirconia (ZrO2) coatings in vitro under physiological...
Nowadays, durable protective coatings receive more attention in the field of conservation for several reasons (they are cost effective, time consuming, more resistance, etc.). Hence, this study was focused on producing a multi-functional, durable coa...
Thin, homogeneous ZrO2 films were obtained by spin coating method from ZrOCl2 8H2O solution, modified with polyethylene glycol (PEG) (Mw = 400). The films have thickness of 80 nm and refractive index of about 1.45, which varied with the amount of add...
Thermal barrier coatings protect metallic components operating under severe high-temperature conditions, but conventional yttria-stabilized zirconia (YSZ) coatings face limitations at elevated temperatures. Gadolinium zirconate (Gd2Zr2O7, GZO) is a p...
Although ultrafiltration is a reliable method for separating oily wastewater, the process is limited by problems of low flux and membrane fouling. In this study, for the first time, commercial TiO2/ZrO2 ceramic membranes modified with silver-function...
A novel sorbent based on the ZrO2 nanoparticles and poly(diallyldimethylammonium chloride)-modified graphene oxide aerogel-grafted stainless steel mesh (ZrO2/PDDA-GOA-SSM) was used for the extraction and detection of organophosphorus pesticides (OPPs...
This study numerically investigates cyclic thermal shock behavior of ZrO2/Ti functionally graded thermal barrier coatings (FG TBCs) based on a nonlinear mean-field micromechanical approach, which takes into account the time-independent and dependent...
This study investigates the development of silver (Ag)-doped zirconia (ZrO2) coatings deposited on 316LVM stainless steel via the unbalanced magnetron sputtering technique. The oxygen content in the Ar/O2 gas mixture was systematically varied (12.5%,...
To enhance the surface hardness and wear resistance of TC4 titanium alloy, this paper systematically investigates the effects of voltage, time, and nano-ZrO2 particle concentration on the microstructure, phase composition, hardness, and wear resistan...
Dense, highly textured, hydrophobic ZrO2-TiO2 (1:1) coatings with amorphous structure were prepared using the sol-gel method. Both organic and inorganic zirconium precursor salts were used. The present study dealt with the investigation of their prot...
Background: the clinical application of orthopedic or dental implants improves the quality of the lives of patients. However, the long-term use of implants may lead to implant loosening and related complications. The purpose of this study is to depos...
This paper presents high temperature low friction behaviors of the h-BN coatings, which were deposited on high-speed tool steel by radio frequency magnetron sputtering. A tribometer was used to investigate high temperature tribological properties of...
This study uses atmospheric plasma spraying (APS) technology to prepare thermal barrier coatings (TBCs) with yttrium-stabilized zirconia (YSZ) and Yb2O3-Y2O3-co-stabilized ZrO2 (YbYSZ) materials at different spraying powers. It analyzes the differenc...
Ti and its alloys have been vastly employed in the manufacturing of biomedical implants for orthopedy and dentistry, especially the Ti-6Al-4V alloy (wt%), which is the most-used Ti alloy worldwide. However, the ion release of Al and V in the long ter...
Trace detection of common pesticide residue is necessary to assure safety of fruit and vegetables, given that the potential health risk to consumers is attributed to the contamination of the sources. A simple, rapid and effective means of finding the...
Ceramic Al2O3−ZrO2−SiO2 coatings with near eutectic composition were plasma sprayed using hybrid water stabilized plasma torch (WSP-H). The as-sprayed coatings possessed fully amorphous microstructure which can be transformed to nanocryst...
Enhanced corrosion efficiency of low-carbon steel was achieved by newly developed hybrid multilayers, composed of low-carbon steel coated with an electrodeposited zinc sublayer (1 µm), a chitosan (CS) middle layer and ZrO2 coating by the sol–gel meth...
In order to evaluate the electrochemical behavior of nano-ZrO2 particles in the co-deposition process, revealing the electrocrystallization mechanism and electrodeposition parameters of composite coatings, cyclic voltammetry (CV), chronoamperometry (...
The goal of this stydy was to explore the potential of the enhanced corrosion resistance of Ti(N,O) cathodic arc evaporation-coated 304L stainless steel using oxide nano-layers deposited by atomic layer deposition (ALD). In this study, we deposited A...
In this study, coatings of different oxides (TiO2, Al2O3, ZrO2) and hydroxyapatite (HAp) as well as sandwich composite hydroxyapatite with an oxides sublayer (oxide+HAp) were deposited on Ti6Al7Nb alloy using the sol–gel dip-coating method. The...
Yttria-stabilized zirconia (YSZ) thermal barrier coatings suffer from t′ phase destabilization and insufficient thermal insulation above 1200 °C. In this work, YbO1.5-stabilized ZrO2 powders (xYbSZ, x = 4–12 mol% YbO1.5 on a cation ba...
Owing to its low resistivity, high transmittance, and tunable optical band gap, ZnO is of great interest for optoelectronic applications. Herein, the sol–gel technique was used to synthesize un-doped and zirconium-doped zinc oxide (ZZO) nanostr...
of 11