Skip to Content
You are currently on the new version of our website. Access the old version .

3,646 Results Found

  • Article
  • Open Access
8 Citations
7,386 Views
11 Pages

Influence of Surface Processing on the Biocompatibility of Titanium

  • Kornelia Wirsching,
  • Karla Lehle,
  • Peter Jacob,
  • Otto Gleich and ,
  • Jürgen Strutz and
  • Pingling Kwok
  • + 1 author+ 0 author

6 July 2011

Surface conditioning of titanium middle ear implants results in an improved biocompatibility, which can be characterized by the properties of fibroblasts cultured on conditioned surfaces. Titanium has been established as a favorable biomaterial in os...

(This article belongs to the Special Issue Advances in Biomaterials 2011)
  • Article
  • Open Access
507 Views
34 Pages

Optimization of Hydrogenation, Milling, and Dehydrogenation Parameters During HDH Processing of Sponge Titanium

  • Nazerke Serikkyzy,
  • Zarina Aringozhina,
  • Bauyrzhan Rakhadilov,
  • Malgorzata Rutkowska-Gorczyca and ,
  • Meruyert Adilkanova and
  • Nurtoleu Magazov
  • + 1 author+ 0 author

4 August 2026

The influence of hydrogenation, mechanical milling, and dehydrogenation parameters on the structure and properties of titanium powders produced from titanium sponge via the hydride–dehydride (HDH) process was investigated. The aim of the study...

  • Article
  • Open Access
26 Citations
6,246 Views
9 Pages

Effect of Electron Beam Method on Processing of Titanium Technogenic Material

  • Katia Vutova,
  • Vania Vassileva,
  • Vladislava Stefanova,
  • Dinesh Amalnerkar and
  • Takeshi Tanaka

14 June 2019

This study reveals the efficiency of the electron beam processing of titanium technogenic material with a high level of impurities and the quality of the obtained metal in correlation to process parameters which are discussed. The influence of the be...

  • Review
  • Open Access
132 Citations
19,415 Views
17 Pages

14 March 2021

Titanium alloys have been considered as unique materials for many years. Even their microstructure and operational properties have been well known and described in details, the new technologies introduced—e.g., 3D printing—have restored the need for...

(This article belongs to the Special Issue Titanium Alloys and Titanium-Based Matrix Composites)
  • Article
  • Open Access
3 Citations
2,250 Views
13 Pages

Influence of Cryo-Processing and Post-SPD Annealing on Creep Behavior of CP Titanium

  • Jiri Dvorak,
  • Petr Kral,
  • Andrey G. Kadomtsev,
  • Vladimir I. Betekhtin and ,
  • Maria V. Narykova,
  • Marie Kvapilova and
  • Vaclav Sklenicka
  • + 2 authors+ 0 author

22 February 2022

The commercial purity of VT1-0 titanium was processed by the rolling process and executed at elevated, room, and cryo-temperatures. These processings led to the formation of an ultrafine-grained microstructure, with the mean grain size at a nanometer...

(This article belongs to the Special Issue Creep and High Temperature Deformation of Steels and Alloys)
  • Review
  • Open Access
14 Citations
6,402 Views
27 Pages

Laser Cutting of Titanium Alloy Plates: A Review of Processing, Microstructure, and Mechanical Properties

  • Ya Zhang,
  • Chunyu Wang,
  • Wentao Xu,
  • Xianfeng Zhang and ,
  • Kerong Ren,
  • Shuai Wang and
  • Qing Hua
  • + 2 authors+ 0 author

9 October 2024

The growing use of titanium alloys has led to the gradual replacement of traditional processing methods by laser cutting technology, making it the preferred method for processing titanium alloy plates due to its high efficiency, precision, and adapta...

  • Article
  • Open Access
500 Views
17 Pages

Processing of Demetallized Cast Iron Slag to Obtain REEs Concentrates and Titanium Dioxide

  • Leila Imangaliyeva,
  • Erzhan Kuldeyev,
  • Sergey Gladyshev,
  • Ahmad Mohammad Bahgat Mohammad Gemeal and ,
  • Alfiyam Manapova and
  • Asya Kasymzhanova
  • + 1 author+ 0 author

19 May 2026

Under conditions of depletion of natural resources and increasing volumes of techno-genic waste from metallurgical and alumina production, the development of technologies for the integrated processing of sludges with the extraction of valuable compon...

(This article belongs to the Topic Advances in Solvent Extraction)
  • Article
  • Open Access
1,164 Views
14 Pages

Formation of Piezoelectric Coatings on Titanium by Laser Processing with TiO2/SrCO3 Powder

  • Xenia A. Egorova,
  • Fedor A. Gorensky,
  • Olesya E. Mayorova,
  • Anton S. Loshachenko and ,
  • Mikhail V. Zhukov,
  • Evgeniia M. Khairullina and
  • Dmitry A. Sinev
  • + 2 authors+ 0 author

Titanium and its alloys are widely used in orthopedic and dental implantology for their corrosion resistance and biocompatibility supporting osseointegration; however, their usage is accompanied by release of wear debris that may induce inflammatory...

(This article belongs to the Section Manufacturing Technology)
  • Article
  • Open Access
7 Citations
2,720 Views
15 Pages

Technology for Complex Processing of Electric Smelting Dusts of Ilmenite Concentrates to Produce Titanium Dioxide and Amorphous Silica

  • Zaure Karshyga,
  • Almagul Ultarakova,
  • Nina Lokhova,
  • Azamat Yessengaziyev and ,
  • Kaisar Kassymzhanov and
  • Maxat Myrzakulov
  • + 1 author+ 0 author

11 December 2022

This paper presents the results of research on the development of a technology intended to process electric smelting dusts of ilmenite concentrate with the extraction of silicon and titanium and the production of products in the form of their dioxide...

(This article belongs to the Special Issue Metal Recovery and Separation from Wastes)
  • Review
  • Open Access
2 Citations
2,611 Views
27 Pages

Titanium alloys face challenges such as high temperatures, high forces, and tool wear during turning, milling, drilling, and grinding operations. Cryogenic minimum quantity lubrication (CMQL) technology, which combines cryogenic cooling with micro-lu...

(This article belongs to the Special Issue Tribology in Manufacturing Engineering)
  • Article
  • Open Access
1 Citations
2,479 Views
18 Pages

The Influence of Pulsed Electron Beam Processing on the Quality of Working Surfaces of Titanium Alloy Products

  • Undrakh Mishigdorzhiyn,
  • Aleksey Pyatykh,
  • Andrey Savilov,
  • Nikolay Ulakhanov and ,
  • Ivan Galetsky,
  • Kirill Demin,
  • Alexander Tikhonov,
  • Maxim Vorobyov,
  • Elizaveta Petrikova and
  • Shunqi Mei
  • + 5 authors+ 0 author

Titanium alloys are widely used in medicine due to their unique properties, including inertness with respect to living tissues, light weight, high strength, and impact toughness. For successful implementation, titanium alloy implants should possess h...

  • Article
  • Open Access
7 Citations
3,393 Views
22 Pages

3 April 2021

Surface processing of pure titanium was performed using a carbon sheet to increase the surface hardness and improve tribological property. The effect of processing temperature (750–950 °C) for 2 h on the structure, mechanical and room-temperature tri...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
1 Citations
987 Views
21 Pages

Formation of Ti-Cu-Ni Intermetallic Coatings on Titanium by Laser Processing of an Explosively Welded Layered Composite

  • Artem Igorevich Bogdanov,
  • Vitaliy Pavlovich Kulevich,
  • Leonid Moiseevich Gurevich and
  • Victor Georgievich Shmorgun

This study investigates the influence of design factors and key process parameters—including explosive welding (EXW), rolling, and laser processing—on the formation, microstructure, and tribological properties of Ti–Cu–Ni inte...

  • Review
  • Open Access
42 Citations
8,340 Views
47 Pages

17 May 2023

A review of the state of research in the field of friction stir welding and processing has been carried out. The features of plastic flow in friction stir welding and their connection with the processes of adhesion friction are shown. The main direct...

(This article belongs to the Special Issue Recent Developments of Non-ferrous Alloys: Processing, Microstructure and Properties)
  • Article
  • Open Access
9 Citations
6,526 Views
14 Pages

Batch Processing in Preassembled Die Sets—A New Process Design for Isothermal Forging of Titanium Aluminides

  • Markus Bambach,
  • Irina Sizova,
  • Alexander Sviridov,
  • Johan Andreas Stendal and
  • Martin Günther

Titanium aluminide (TiAl) turbine blades produced by isothermal forging have recently been implemented in the low-pressure part of commercial aircraft jet engines. However, the slow speed of isothermal forging, costly molybdenum-based dies and the re...

  • Article
  • Open Access
9 Citations
2,942 Views
16 Pages

25 March 2020

Hot deformation behavior of a high-titanium Nb-micro-alloyed steel was investigated by conducting hot compression tests at the temperature of 900–1100 °C and the strain rate of 0.005–10 s−1. Using a sinh type constitutive equati...

  • Article
  • Open Access
4 Citations
2,604 Views
17 Pages

Improving the Wear-Resistance of BT22 Titanium Alloy by Forming Nano-Cellular Topography via Laser-Thermochemical Processing

  • Oleksandr Tisov,
  • Alina Yurchuk,
  • Mykhaylo Pashechko,
  • Iryna Pohreliuk and ,
  • Dariusz Chocyk and
  • Myroslav Kindrachuk
  • + 1 author+ 0 author

23 May 2023

This paper studies the microstructure, phase composition and tribological response of BT22 bimodal titanium alloy samples, which were selectively laser-processed before nitriding. Laser power was selected to obtain a maximum temperature just a little...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
70 Views
22 Pages

High-Temperature Hot Deformation Behavior and Processing Map of TC11 Titanium Alloy

  • Yanchun Zhu,
  • Yefan Li,
  • Jie Lu,
  • Shijie Wang and ,
  • Lei Liu,
  • Zhibing Chu,
  • Shangwu Jia,
  • Yong Niu and
  • Fan Wang
  • + 4 authors+ 0 author

4 November 2026

In this study, the high-temperature deformation behavior of TC11 titanium alloy was investigated through hot compression experiments. The relationship between flow stress, strain rate, and deformation temperature was described by analyzing stress&nda...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
14 Citations
7,473 Views
19 Pages

4 June 2019

Material reductions, weight savings, design optimisation, and a reduction in the environmental impact can be achieved by improving the performance of near-net shape (NNS) titanium alloy components. The method demonstrated in this paper is to use a so...

(This article belongs to the Special Issue Titanium Alloys: Processing and Properties)
  • Article
  • Open Access
24 Citations
3,997 Views
15 Pages

Application of the Strain Compensation Model and Processing Maps for Description of Hot Deformation Behavior of Metastable β Titanium Alloy

  • Oleksandr Lypchanskyi,
  • Tomasz Śleboda,
  • Aneta Łukaszek-Sołek,
  • Krystian Zyguła and
  • Marek Wojtaszek

17 April 2021

The flow behavior of metastable β titanium alloy was investigated basing on isothermal hot compression tests performed on Gleeble 3800 thermomechanical simulator at near and above β transus temperatures. The flow stress curves were obtained for defor...

(This article belongs to the Special Issue Hot Deformation and Microstructure Evolution of Metallic Materials)
  • Article
  • Open Access
5 Citations
4,413 Views
16 Pages

28 November 2024

This paper focuses on optimizing the process parameters for manufacturing commercially pure titanium grade 2 using Laser Powder Bed Fusion (L-PBF) technology. The most common approach involves trial-and-error builds with varying parameter combination...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Additive Manufacturing Technology)
  • Article
  • Open Access
8 Citations
4,522 Views
14 Pages

Laser Processing of Liquid Feedstock Plasma-Sprayed Lithium Titanium Oxide Solid-State-Battery Electrode

  • Arman Hasani,
  • Mathis Luya,
  • Nikhil Kamboj,
  • Chinmayee Nayak and ,
  • Shrikant Joshi,
  • Antti Salminen,
  • Sneha Goel and
  • Ashish Ganvir
  • + 3 authors+ 0 author

12 February 2024

The astonishing safety and capacity characteristics of solid-state-batteries are encouraging researchers and companies to work on the manufacturing, development, and characterization of battery materials. In the present work, the effects of laser bea...

(This article belongs to the Special Issue Laser Surface Engineering: Technologies and Applications)
  • Article
  • Open Access
3 Citations
2,334 Views
17 Pages

Hot Workability and Microstructural Evolution of Ti-5.5Al-5Mo-5V-2Nb-1Fe-1Zr Titanium Alloy Based on the Different Phase Zones during Plastic Deformation at High Temperatures

  • Yushe Gao,
  • Xianghong Liu,
  • Haisheng Chen,
  • Xiangyi Xue and ,
  • Huixian Gao,
  • Wenzhong Luo,
  • Kaixuan Wang,
  • Shaoqiang Li and
  • Yuxuan Du
  • + 4 authors+ 0 author

1 January 2023

Hot workability and microstructural evolution of Ti-5.5Al-5Mo-5V-2Nb-1Fe-1Zr titanium alloy, which is also called Ti555211 titanium alloy, are investigated during compressive deformation at different temperatures and strain rates. It can be found tha...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
20 Citations
5,017 Views
19 Pages

Electron Beam Powder Bed Fusion of γ-Titanium Aluminide: Effect of Processing Parameters on Part Density, Surface Characteristics, and Aluminum Content

  • Juliane Moritz,
  • Mirko Teschke,
  • Axel Marquardt,
  • Lukas Stepien and ,
  • Elena López,
  • Frank Brückner,
  • Marina Macias Barrientos,
  • Frank Walther and
  • Christoph Leyens
  • + 4 authors+ 0 author

9 July 2021

Gamma titanium aluminides are very interesting for their use in high-performance applications such as aircraft engines due to their low density, high stiffness and favorable high-temperature properties. However, the pronounced brittleness of these in...

(This article belongs to the Special Issue TiAl-Based Alloys and Their Applications)
  • Review
  • Open Access
9 Citations
9,269 Views
20 Pages

An Overview of Thermochemical Reduction Processes for Titanium Production

  • Nyasha Matsanga,
  • Michel Wa Kalenga and
  • Willie Nheta

27 December 2024

Titanium is one of the most abundant metals with superior properties such as excellent mechanical properties, high strength-to-weight ratio, and oxidation and corrosion resistance. However, it is commercially expensive to produce; hence, its use is l...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
17 Citations
3,710 Views
13 Pages

Hot Deformation Behavior and Processing Maps of a New Ti-6Al-2Nb-2Zr-0.4B Titanium Alloy

  • Zhijun Yang,
  • Weixin Yu,
  • Shaoting Lang,
  • Junyi Wei and ,
  • Guanglong Wang and
  • Peng Ding
  • + 1 author+ 0 author

9 May 2021

The hot deformation behaviors of a new Ti-6Al-2Nb-2Zr-0.4B titanium alloy in the strain rate range 0.01–10.0 s−1 and temperature range 850–1060 °C were evaluated using hot compressing testing on a Gleeble-3800 simulator at 60% of deformation degree....

  • Article
  • Open Access
5 Citations
2,737 Views
12 Pages

The Regularities of Metal Transfer by a Nickel-Based Superalloy Tool during Friction Stir Processing of a Titanium Alloy Produced by Wire-Feed Electron Beam Additive Manufacturing

  • Valery Rubtsov,
  • Andrey Chumaevskii,
  • Evgeny Knyazhev,
  • Veronika Utyaganova and ,
  • Denis Gurianov,
  • Alihan Amirov,
  • Andrey Cheremnov and
  • Evgeny Kolubaev
  • + 3 authors+ 0 author

15 January 2024

In this work, the interaction of an additively produced Ti-4Al-3V titanium alloy with a nickel superalloy tool and the features of the stir zone formation during friction stir processing have been studied. The stop-action technique was used to produc...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Additive Manufacturing Technology)
  • Article
  • Open Access
16 Citations
2,994 Views
13 Pages

Microstructural Evolution and Surface Mechanical Properties of the Titanium Alloy Ti-13Nb-13Zr Subjected to Laser Shock Processing

  • Jiajun Wu,
  • Xingze Lin,
  • Hongchao Qiao,
  • Jibin Zhao and ,
  • Wangwang Ding and
  • Ran Zhu
  • + 1 author+ 0 author

27 December 2022

As a progressive surface-hardening technology, laser shock processing (LSP) can enhance the mechanical properties and extend fatigue life for metallic components through laser-generated high-pressure plasma shock waves. In this work, LSP was used to...

(This article belongs to the Special Issue High Performance Alloy and Its Nanocomposites)
  • Article
  • Open Access
2 Citations
1,306 Views
17 Pages

Finite Element Simulation and Optimization of Process Parameters for Titanium Chip Crusher

  • Jianghua Huang,
  • Zeling Zhao,
  • Xiaomin Huang,
  • Tao Liu and
  • Hongchao Ji

22 April 2025

Titanium alloy has been widely used in aerospace, military, and national defense, and other high-tech fields due to its advantages of light weight, high specific strength, excellent corrosion resistance, excellent heat resistance, and good low-temper...

(This article belongs to the Special Issue Alloy Strengthening Mechanisms, Microstructure Control, and Performance Optimization)
  • Article
  • Open Access
3 Citations
2,554 Views
14 Pages

6 May 2022

In the present study, isothermal compression tests are conducted for a near-α Ti–3.3Al–1.5Zr–1.2Mo–0.6Ni titanium alloy at deformation temperatures ranging from 1073 K to 1293 K and strain rates ranging from 0.01 s&minus...

  • Article
  • Open Access
1 Citations
1,558 Views
15 Pages

3 June 2025

The plume emission generated during the interaction of a fiber laser with titanium is spectrally analyzed to investigate the thermal effect-based spectral signature with a focus on surface impact and penetration depth. A wobble head coupled with the...

(This article belongs to the Special Issue Progress in Laser-Assisted Manufacturing and Materials Processing)
  • Article
  • Open Access
1,086 Views
14 Pages

29 April 2025

TiSi2 and Ti5Si3 were synthesized through a simple and cost-effective process, providing a sustainable way to recycle titanium oxide and silicon wastes from industry. The reaction process was investigated at 1500 °C under various slag/silicon rat...

(This article belongs to the Section Sustainable Materials)
  • Review
  • Open Access
37 Citations
9,402 Views
20 Pages

Recent Progress in Electric Furnace Titanium Slag Processing and Utilization: A Review

  • Jianfa Jing,
  • Yufeng Guo,
  • Shuai Wang,
  • Feng Chen and ,
  • Lingzhi Yang and
  • Guanzhou Qiu
  • + 1 author+ 0 author

9 July 2022

Titanium slags produced through ilmenite electric furnace smelting contain 60–80%TiO2, a vital titanium resource in the titanium industry. The processing and utilization of titanium slag is faced with many challenges, such as complex mineral structur...

(This article belongs to the Section Mineralogical Crystallography and Biomineralization)
  • Article
  • Open Access
17 Citations
9,205 Views
14 Pages

Processing of Intermetallic Titanium Aluminide Wires

  • Tom Marr,
  • Jens Freudenberger,
  • Alexander Kauffmann,
  • Jan Romberg and ,
  • Ilya Okulov,
  • Romy Petters,
  • Juliane Scharnweber,
  • Andy Eschke,
  • Carl-Georg Oertel and
  • Ludwig Schultz
  • + 8 authors+ 3 authors

10 May 2013

This study shows the possibility of processing titanium aluminide wires by cold deformation and annealing. An accumulative swaging and bundling technique is used to co-deform Ti and Al. Subsequently, a two step heat treatment is applied to form the d...

  • Article
  • Open Access
1 Citations
764 Views
21 Pages

Enhancement of Antibacterial and Cytocompatibility Characteristics of Hydrophobic and Hydrophilic Titanium Surfaces Fabricated by Femtosecond Laser Processing

  • Hun-Kook Choi,
  • Young-Jun Jung,
  • Ik-Bu Sohn,
  • Harim Song and ,
  • Hyeongdo Jeong,
  • Seungpyo Kim,
  • Daeseon Moon and
  • Md. Shamim Ahsan
  • + 3 authors+ 0 author

12 January 2026

We demonstrate the enhancement of antibacterial and cytocompatibility characteristics of femtosecond laser-treated pure titanium and Ti-6Al-4V titanium alloy samples suitable for orthopedic implant applications. We controlled the wettability of the t...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
6 Citations
2,897 Views
17 Pages

Effect of Oxidation Process on Mechanical and Tribological Behaviour of Titanium Grade 5 Alloy

  • Abdulsalam Saier,
  • Ismail Esen,
  • Hayrettin Ahlatci and
  • Esma Keskin

6 February 2024

In this study, microstructural characterization, mechanical (tensile and compressive) properties, and tribological (wear) properties of Titanium Grade 5 alloy after the oxidation process were examined. While it is observed that the grey contrast colo...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
1 Citations
1,766 Views
14 Pages

9 September 2024

The continuous retained-mandrel rolling process is a promising method for titanium tube production with high efficiency and a short process. The importance of mandrel as a deformation tool supporting the inner wall is crucial. This paper thoroughly e...

  • Article
  • Open Access
2,730 Views
15 Pages

Nanosecond Laser Processing of Titanium in Organic Liquids as a Method for Obtaining Titanium Carbide Coatings

  • Rosen Nikov,
  • Nikolay Nedyalkov,
  • Stefan Valkov,
  • Tatyana Koutzarova and ,
  • Lyubomir Aleksandrov,
  • Genoveva Atanasova and
  • Katarzyna Grochowska
  • + 2 authors+ 0 author

28 January 2025

This work presents results on nanosecond laser ablation of a titanium (Ti) plate immersed in a liquid medium using the fundamental wavelength (1064 nm) of a nanosecond Nd:YAG laser system. The laser radiation was focused on the target surface as scan...

(This article belongs to the Special Issue Advances in Metal Coatings for Wear and Corrosion Applications)
  • Article
  • Open Access
15 Citations
3,348 Views
23 Pages

6 January 2021

This study presents the structural aspects of the solid-state processing of various titanium chips. The structural characterization of: (1) commercial pure Ti in the as-received state, (2) manufactured chips, and (3) products of the chip processing a...

(This article belongs to the Special Issue Titanium Alloys and Titanium-Based Matrix Composites)
  • Article
  • Open Access
5 Citations
4,190 Views
13 Pages

Single-Step Process for Titanium Surface Micro- and Nano-Structuring and In Situ Silver Nanoparticles Formation by Ultra-Short Laser Patterning

  • Dante Maria Aceti,
  • Emil Filipov,
  • Liliya Angelova,
  • Lamborghini Sotelo and ,
  • Tommaso Fontanot,
  • Peyman Yousefi,
  • Silke Christiansen,
  • Gerd Leuchs,
  • Stanislav Stanimirov and
  • Albena Daskalova
  • + 7 authors+ 2 authors

3 July 2022

Ultra-short laser (USL)-induced surface structuring combined with nanoparticles synthesis by multiphoton photoreduction represents a novel single-step approach for commercially pure titanium (cp-Ti) surface enhancement. Such a combination leads to th...

  • Article
  • Open Access
9 Citations
2,672 Views
29 Pages

6 July 2022

In this paper, four array patterns were first designed by observing the structural features of the surface microstructures of pig bones and tree frog paws on the titanium alloy surface bionically. Then, the optimal parameters for laser processing wer...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
1,210 Views
11 Pages

Titanium compounds are an integral component for paint pigments, food additives (E171), catalysts, precursors for resistant structural materials, medicine, and water, and air purification and disinfection processes. A new and rather promising trend f...

(This article belongs to the Special Issue Novel Ceramics and Refractory Composites)
  • Article
  • Open Access
2 Citations
572 Views
15 Pages

Multi-Objective Process Optimization of Micro-Milling Titanium Alloy Ti6Al4V for Microgrooves

  • Yabo Zhang,
  • Chenyang Wang,
  • Qingshun Bai,
  • Qiqin Zhang and
  • Xin He

20 May 2026

High-quality microgrooves obtained in micro-milling titanium alloy Ti6Al4V are still challenging work due to the dependence of burr formation and surface roughness on cutting parameters. In this paper, the systematic analysis of the micro-milling pro...

(This article belongs to the Special Issue Latest Developments in Advanced Machining Technologies for Materials)
  • Article
  • Open Access
13 Citations
2,527 Views
15 Pages

Studies on the Processing of Fine Dusts from the Electric Smelting of Ilmenite Concentrates to Obtain Titanium Dioxide

  • Almagul Ultarakova,
  • Zaure Karshyga,
  • Nina Lokhova,
  • Azamat Yessengaziyev and ,
  • Kaisar Kassymzhanov and
  • Arailym Mukangaliyeva
  • + 1 author+ 0 author

23 November 2022

This article presents studies on the ammonium fluoride processing of dusts from the reduction smelting of ilmenite concentrate with separation of silicon to obtain titanium dioxide. Optimal conditions for pyrohydrolysis of titanium fluorides were det...

(This article belongs to the Special Issue Recovery of Non-ferrous Metal from Metallurgical Residues)
  • Article
  • Open Access
17 Citations
3,738 Views
10 Pages

19 March 2020

Titanium alloy wire is characterized by high specific strength, good corrosion resistance, high-temperature resistance and other excellent comprehensive performance. It has been widely used not only in aerospace, shipbuilding and other high-tech fiel...

(This article belongs to the Special Issue Advanced Surface Treatment Technologies for Metallic Alloys)
  • Review
  • Open Access
23 Citations
8,531 Views
33 Pages

Recent Advances in Processing of Titanium and Titanium Alloys through Metal Injection Molding for Biomedical Applications: 2013–2022

  • Al Basir,
  • Norhamidi Muhamad,
  • Abu Bakar Sulong,
  • Nashrah Hani Jamadon and
  • Farhana Mohd Foudzi

26 May 2023

Metal injection molding (MIM) is one of the most widely used manufacturing processes worldwide as it is a cost-effective way of producing a variety of dental and orthopedic implants, surgical instruments, and other important biomedical products. Tita...

(This article belongs to the Special Issue Advances in Materials Processing (Second Volume))
  • Article
  • Open Access
3 Citations
2,808 Views
11 Pages

Simulation Analysis of Nanosecond Laser Processing of Titanium Alloy Based on Helical Trepanning

  • Yuchen Liang,
  • Guang Feng,
  • Xiaogang Li,
  • Haoran Sun and ,
  • Wei Xue,
  • Kunpeng Zhang and
  • Fengping Li
  • + 2 authors+ 0 author

8 September 2022

Titanium alloy is a type of high-strength material that is difficult to process. In particular, in the aerospace field, the processing accuracy of titanium alloy is high. Recently, laser processing has emerged as a new technology with high processing...

  • Review
  • Open Access
1,677 Views
53 Pages

Titanium-Based Biomaterials: Processing, Properties, and Applications in Biomedical Engineering

  • Matthew Davidson,
  • Subin Antony Jose,
  • Mason Paul,
  • Erick Perez-Perez and ,
  • Caleb Potts,
  • Royce Roque,
  • Andrew Rounds and
  • Pradeep L. Menezes
  • + 3 authors+ 0 author

6 July 2026

Titanium and its alloys are cornerstone biomaterials due to their high strength-to-weight ratio, excellent fatigue and corrosion resistance, biocompatibility, and ability to osseointegrate with bone. Their relatively low elastic modulus compared to s...

  • Review
  • Open Access
17 Citations
4,998 Views
53 Pages

11 December 2024

Titanium (Ti) and its alloys are used in various applications, including aircraft frames, ship parts, heat exchangers, and evaporator tubes, because of their extraordinary properties, such as high specific strength, excellent corrosion resistance at...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
3,444 Views
18 Pages

Operational Variables on the Processing of Porous Titanium Bodies by Gelation of Slurries with an Expansive Porogen

  • Antonio Javier Sanchez-Herencia,
  • Zoilo Gonzalez,
  • Alejandro Rodriguez,
  • Esther Molero and
  • Begoña Ferrari

22 August 2021

Colloidal processing techniques, based on the suspension of powders in a liquid, are very versatile techniques to fabricate porous structures. They can provide customized pores, shapes and surfaces through the control of operational parameters, being...

(This article belongs to the Section Porous Materials)

of 73