Skip to Content

2,240 Results Found

  • Article
  • Open Access
10 Citations
3,550 Views
24 Pages

On Ausferrite Produced in Thin Sections: Stability Assessment through Round and Flat Tensile Specimen Testing

  • Giuliano Angella,
  • Riccardo Donnini,
  • Dario Ripamonti,
  • Franco Bonollo and ,
  • Bogdan Cygan and
  • Marcin Gorny
  • + 1 author+ 0 author

4 January 2023

Ductile irons were produced into different casting wall sections, that is, 25 mm, 5 mm and 3 mm. The alloys were then austenitized with the same conditions at 875 °C for 2 h and austempered for three different combinations of temperatures and tim...

(This article belongs to the Special Issue Recent Advances in Cast Irons)
  • Article
  • Open Access
9 Citations
3,711 Views
25 Pages

1 July 2024

Cement-stabilized rammed earth (CSRE) is a variation of the traditional rammed earth building material, which has been used since ancient times, strengthened by the addition of a stabilizer in the form of Portland cement. This article compares the co...

(This article belongs to the Special Issue Current Technological, Methodological, and Organizational Research Trends in the Construction Industry, Second Edition)
  • Article
  • Open Access
5 Citations
1,172 Views
26 Pages

Effects of Tensile Specimen Geometry and Gripping System on the Mechanical Stability of Ausferrite in Austempered Ductile Irons

  • Lun Fu,
  • Manuel Schiralli,
  • Maurizio Vedani,
  • Jakob Olofsson and ,
  • Marcin Górny,
  • Parnian Govahi,
  • Riccardo Donnini,
  • Maria Losurdo and
  • Giuliano Angella
  • + 4 authors+ 0 author

18 September 2025

Different combinations of round and flat tensile specimens for different gripping systems of Austempered Ductile Irons (ADIs) were produced from the same 25 mm Y-block castings to investigate the effect of the specimen geometry and gripping system on...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
11 Citations
3,789 Views
16 Pages

18 March 2020

Underground coal mines are frequently subjected to water infusion, resulting in many mining hazards. This study investigated the effect of water infusion on the stress and energy evolution characteristics of coal specimens representing isolated pilla...

  • Article
  • Open Access
384 Views
24 Pages

Formulation-Dependent Physical, Mechanical, and Water-Exposure Behavior of Hemp-Based Mycelium Composites with Polymeric Additives

  • Ewa Borucinska-Parfieniuk,
  • Małgorzata Kowalska,
  • Madhavi H. Dalsaniya,
  • Adrian Dubicki and ,
  • Magdalena Pantol,
  • Wojciech Grodzki,
  • Małgorzata Krasowska,
  • Jolanta Piekut,
  • Eugene Yurchenko and
  • Izabela B. Zglobicka
  • + 6 authors+ 1 author

10 October 2026

Hemp-based mycelium composites are promising bio-based materials, but their heterogeneous structure may strongly affect mechanical performance and stability under water exposure. Six hot-pressed composites based on hemp hurds and chopped hemp straw,...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
1 Citations
2,482 Views
17 Pages

Impact of Food Exposome on Atherosclerotic Plaque Stability: Metabolomic Insights from Human Carotid Endarterectomy Specimen

  • Emilie Doche,
  • Barbara Leclercq,
  • Constance Sulowski,
  • Ellen Magoncia and ,
  • Catherine Tardivel,
  • Ljubica Svilar,
  • Gabrielle Sarlon-Bartoli,
  • Jean-Charles Martin,
  • Michel Bartoli and
  • Laurent Suissa
  • + 6 authors+ 1 author

Carotid atherosclerotic stenosis (CAS) is a leading cause of ischemic stroke. Current understanding of plaque vulnerability remains largely confined to histopathological characterization. Consequently, identifying molecular determinants of plaque sta...

(This article belongs to the Section Bioactives and Nutraceuticals)
  • Article
  • Open Access
12 Citations
3,096 Views
15 Pages

Time-Stability Dispersion of MWCNTs for the Improvement of Mechanical Properties of Portland Cement Specimens

  • Laura M. Echeverry-Cardona,
  • Natalia Álzate,
  • Elisabeth Restrepo-Parra,
  • Rogelio Ospina and
  • Jorge H. Quintero-Orozco

18 September 2020

This study shows the energy optimization and stabilization in the time of solutions composed of H2O + TX-100 + Multi-Wall Carbon Nanotubes (MWCNTs), used to improve the mechanical properties of Portland cement pastes. For developing this research, so...

(This article belongs to the Special Issue Carbon Nanotube Based Composites: Processing, Properties, Modeling and Application)
  • Review
  • Open Access
7 Citations
3,894 Views
11 Pages

Assessment of Strategies for Preserving Swine Viral RNA Targets in Diagnostic Specimens

  • Berenice Munguía-Ramírez,
  • Luis Giménez-Lirola and
  • Jeffrey Zimmerman

Successful downstream molecular analyses of viral ribonucleic acid (RNA) in diagnostic laboratories, e.g., reverse transcription-quantitative polymerase chain reaction (RT-qPCR) or next-generation sequencing, are dependent on the quality of the RNA i...

(This article belongs to the Section Veterinary Microbiology)
  • Review
  • Open Access
57 Citations
8,644 Views
19 Pages

6 September 2016

Advanced intermetallic alloys based on the γ-TiAl phase have become widely regarded as most promising candidates to replace heavier Ni-base superalloys as materials for high-temperature structural components, due to their facilitating properties of h...

(This article belongs to the Special Issue Physical Metallurgy of High Performance Alloys)
  • Review
  • Open Access
363 Views
20 Pages

Background. Blood gas analysis (BGA) is a decision-critical test with low biological variation, and it is increasingly performed outside the central laboratory. We synthesised the evidence on pre-analytical and analytical factors that affect its accu...

  • Article
  • Open Access
42 Citations
4,749 Views
18 Pages

18 August 2022

High-speed sintering of zirconia has become essential to single-visit dental prosthetic treatments. This important prosthetic dentistry technique demands a translucent material tougher than porcelain. Previous studies on high-speed sintered zirconia...

  • Article
  • Open Access
7 Citations
2,627 Views
17 Pages

25 August 2022

The mechanical properties of cement-stabilized macadam (CSM) base mixture are closely related to its forming process. Although the present study investigates the macroscopic effects of molding on cement-stabilized macadam, mesoscopic research analyse...

  • Article
  • Open Access
38 Citations
3,572 Views
15 Pages

30 October 2022

In order to develop a new kind of filament material for the fused deposition modeling (FDM) 3D printing, the residue of Astragalus (ROA), one of the most important Chinese herbal medicines, and polylactic acid were chosen as the raw materials to FDM...

  • Article
  • Open Access
28 Citations
6,935 Views
16 Pages

A Study of the Strength Performance of Peat Soil: A Modified Cement-Based Stabilization Agent Using Fly Ash and Polypropylene Fiber

  • Mohammed K. H. Radwan,
  • Foo Wei Lee,
  • Yoke Bee Woon,
  • Ming Kun Yew and ,
  • Kim Hung Mo and
  • Soon Han Wai
  • + 1 author+ 0 author

23 November 2021

The use of cement as a soil stabilization agent is one of the common solutions to enhancing the engineering properties of soil. However, the impact and cost of using cement have raised environmental concerns, generating much interest in the search fo...

(This article belongs to the Special Issue Synthesis, Processing, Structure and Properties of Polymer Materials)
  • Article
  • Open Access
19 Citations
3,506 Views
11 Pages

Study on Dimensional Stability of Veneer Rice Straw Particleboard

  • Xianqing Xiong,
  • Yiting Niu,
  • Yingying Yuan and
  • Liangting Zhang

11 June 2020

As an important industry of the national economy, the development of furniture manufacturing industry is very rapid. In particular, with the development of panel furniture industry, wood-based panels have become a necessary choice for furniture mater...

  • Article
  • Open Access
3 Citations
4,329 Views
23 Pages

16 March 2022

The structural integrity of butt fusion (BF) joints in thermoplastic pressure piping systems is critical to their long-term safe use. The tapered waist tensile (TWT) specimen was developed to alleviate issues associated with ISO 13953 waisted tensile...

(This article belongs to the Special Issue Structure-Property Relationship of Polymer Materials)
  • Article
  • Open Access
21 Citations
3,774 Views
15 Pages

Evolution Law and Mechanism of Freeze–Thaw Damage of Cement-Stabilized Weathered Sand

  • Xianghui Kong,
  • Shuai Cui,
  • Gaoqiang Wang,
  • Wenjun Hu and ,
  • Yunpeng Liang and
  • Zhibin Zhang
  • + 1 author+ 0 author

18 February 2022

To explore the damage evolution law of cement-stabilized weathered sand under the action of freeze–thaw cycles, relevant experimental research was carried out on stabilized weathered sand with a cement content of 3%, including unconfined compre...

(This article belongs to the Special Issue Corrosion and Degradation of Materials)
  • Article
  • Open Access
18 Citations
3,181 Views
16 Pages

Effects of Water-Soaking Height on the Deformation and Failure of Coal in Uniaxial Compression

  • Ruipeng Qian,
  • Guorui Feng,
  • Jun Guo,
  • Pengfei Wang and
  • Haina Jiang

16 October 2019

The stability of water-preventing coal pillar plays an important role in preventing gob water inrush. The gob side of the water-preventing coal pillar is soaked in a certain height of mine water. Different soaking heights may affect the stability of...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
8 Citations
3,699 Views
13 Pages

12 October 2022

The differences of physical and mechanical properties of different laminations, such as softwood, hardwood or other structural composite lumber, in hybrid cross-laminated timber (HCLT), lead to their dimensional stability and bonding performance more...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
2,143 Views
13 Pages

A Laboratory-Scale Evaluation of Smart Pebble Sensors Embedded in Geomaterials

  • Syed Faizan Husain,
  • Mohammad Shoaib Abbas,
  • Han Wang,
  • Issam I. A. Qamhia and ,
  • Erol Tutumluer,
  • John Wallace and
  • Matthew Hammond
  • + 2 authors+ 0 author

25 April 2024

This paper introduces a novel approach to measure deformations in geomaterials using the recently developed ‘Smart Pebble’ sensors. Smart Pebbles were included in triaxial test specimens of unbound aggregates stabilized with geogrids. The...

(This article belongs to the Special Issue Recent Development and Applications of Sensing Technology in Resilient and Sustainable Infrastructure)
  • Article
  • Open Access
22 Citations
5,802 Views
18 Pages

23 January 2025

This study evaluated the strength, hardness, and color stability of 3D-printed denture base resins and compared the outcome with conventional heat-cured denture base resins after aging by thermocycling. A total of 72 specimens from conventional and 3...

(This article belongs to the Special Issue 3D Printing and Molding Study in Polymeric Materials)
  • Article
  • Open Access
19 Citations
3,162 Views
15 Pages

10 March 2023

The stability of damaged rock mass is a critical problem in the control of surrounding rock in underground engineering. As the main macroscopic defect of rock surrounding engineering, it is of great significance to study its propagation mechanism and...

  • Article
  • Open Access
785 Views
15 Pages

13 January 2026

To promote the sustainable utilization of agricultural solid waste, this study proposes a novel approach for reinforcing soft clay using a peanut ash (PA)–cement composite stabilizer. The unconfined compressive strength (UCS) of pure cement and...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
1,019 Views
18 Pages

Stability Analysis of Basic Load-Bearing Units in Independent Scaffolding Systems

  • Xingyu Song,
  • Ingwe Lusekelo Henry,
  • Yan Liu,
  • Jun Hao and ,
  • Xiaolun Hu and
  • Lingkun Chen
  • + 1 author+ 0 author

19 November 2025

Scaffolds, as temporary structural support systems in civil engineering, play an essential role during construction. Independent steel scaffold systems, typically composed of assembled steel tubes, can be erected and function as standalone supports w...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
5 Citations
2,645 Views
14 Pages

26 October 2021

In order to improve the mechanical properties of asphalt pavement, geosynthetics can be employed in asphalt mixture. This research designed 12 reinforced schemes based on the types of geosynthetics, bonding layers and reinforced position. For the rel...

  • Article
  • Open Access
6 Citations
2,465 Views
27 Pages

Effect of Chemical Corrosion on Rock Fracture Behavior in Coastal Deep Mines: Insights from Mechanical and Acoustic Characteristics

  • Jiliang Pan,
  • Yichen Ma,
  • Leiming Zhang,
  • Zegong Ning and ,
  • Ying Zhang and
  • Xun Xi
  • + 1 author+ 0 author

The demand for critical minerals has increased extraction activities in coastal deep mines where challenges such as high stresses, chemical corrosion, and mining disturbance impacts are present. This study investigated the effects of chemical corrosi...

(This article belongs to the Section Coastal Engineering)
  • Article
  • Open Access
1,732 Views
19 Pages

This study focuses on optimizing cruciform specimen configurations for the biaxial tensile testing of soft composite materials used in the aerospace industry under conditions of large deformation. A comprehensive evaluation system based on stress&nda...

(This article belongs to the Special Issue Advanced Composite Materials in Aerospace)
  • Article
  • Open Access
644 Views
24 Pages

18 July 2026

To reveal the influence of water accumulation in open pits on the stability of boundary coal–rock pillars, this study investigates a boundary coal–rock pillar between an underground coal mine and an adjacent open pit in western China. Coa...

(This article belongs to the Section Hydrogeology)
  • Article
  • Open Access
14 Citations
4,678 Views
16 Pages

Titanium Dioxide/Polysiloxane Composites: Preparation, Characterization and Study of Their Color Stability Using Thermochromic Pigments

  • Evangelia Papachristou,
  • Dimitrios Korres,
  • Diomi Mamma,
  • Dimitris Kekos and ,
  • Petroula A. Tarantili and
  • Gregory Polyzois
  • + 1 author+ 0 author

In order to improve thermomechanical, antibacterial and temperature-controlled color-response performance of polydimethylsiloxane (PDMS) in maxillofacial prostheses, the incorporation of titania (TiO2) nanoparticles and thermochromic pigments (TCP) i...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2022)
  • Article
  • Open Access
5 Citations
5,589 Views
13 Pages

Evaluation of Color Stability of Composite Resin Used to Characterize Acrylic Teeth—An In Vitro Study

  • Saadath Afzaa S. Ahamed,
  • Syed Ahmed Raheel,
  • Mohammed B. Ajmal,
  • Manpreet Kaur and ,
  • Nasser M. Alqahtani,
  • Robina Tasleem,
  • Ghadah Khaled Bahamdan,
  • Mayur Hegde and
  • Shaeesta Khaleelahmed Bhavikatti
  • + 4 authors+ 0 author

23 January 2023

The durability and patient acceptability of prosthesis can be gauged by the capacity of visible light curing lab composite resins to maintain color stability through time and use. Consequently, this study’s goal was to assess the color stabilit...

(This article belongs to the Topic Advances in Biomaterials)
  • Article
  • Open Access
10 Citations
3,197 Views
22 Pages

24 March 2021

In this paper, the stability of large-size graded crushed stone used for road base or cushioning under repeated load is investigated. Using an in-house developed device, large-size crushed stone mix was compacted and molded by the vibration and rotar...

(This article belongs to the Special Issue Experimental Testing and Constitutive Modelling of Pavement Materials)
  • Feature Paper
  • Article
  • Open Access
8 Citations
4,640 Views
25 Pages

This study aims to investigate the wear and corrosion–wear behavior of 17-4PH stainless steel specimens, both fabricated via Selective Laser Melting (SLM) and conventional bulk material, after undergoing Solution Treatment (S.T.) in a seawater...

(This article belongs to the Special Issue Anti-corrosion Coatings of Metals and Alloys—New Perspectives)
  • Article
  • Open Access
34 Citations
4,948 Views
18 Pages

1 August 2019

A secondary by-product, quarry fines, has previously been investigated for applications in high volume as pavement construction materials. Results from a series of laboratory tests suggest qualified basic properties except for the possibility of fros...

(This article belongs to the Special Issue Sustainable Designed Pavement Materials)
  • Article
  • Open Access
11 Citations
3,734 Views
17 Pages

Analysis of the Mechanical Properties of a Stabilized Subgrade Type Soil under a Sustainable Approach for Construction

  • Pedro Gallego-Quintana,
  • Omar Farid Ojeda-Farias,
  • Alexander Alvarez-Rosario,
  • Ervin Jesús Alvarez-Sánchez and ,
  • Laura Landa-Ruiz,
  • Bernardo T. Terán-Torres,
  • José Manuel Mendoza-Rangel and
  • Miguel Ángel Baltazar-Zamora
  • + 3 authors+ 0 author

25 September 2023

This article presents an experimental study to analyze the mechanical properties of a soil stabilized with ordinary Portland cement (OPC) under a sustainable approach consisting of a significant substitution of OPC for sugarcane bagasse ash (SCBA) to...

(This article belongs to the Special Issue Advances in Sustainable Civil Engineering Materials)
  • Article
  • Open Access
2 Citations
1,112 Views
20 Pages

Effect of Salinity on the Steady-State and Dynamic Rheological Behavior of Illite Clay

  • Zhichao Liang,
  • Wenyuan Ren,
  • Sha Li,
  • Aijun Zhang and ,
  • Wenjing Mi,
  • Yuguo Wang and
  • Bin Dang
  • + 2 authors+ 0 author

16 June 2025

The rheological behavior of clay in a water–salt environment determines the long-term deformation and structural stability of building materials and geotechnical engineering. In this study, the effects of salinity on the rheological behavior an...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
18 Citations
3,972 Views
11 Pages

Influences of Toothbrushing and Different Toothpastes on the Surface Roughness and Color Stability of Interim Prosthodontic Materials

  • Ayşegül Köroğlu,
  • Onur Şahin,
  • Ahmet Serkan Küçükekenci,
  • Doğu Ömür Dede and ,
  • Hüsniye Yıldırım and
  • Burak Yilmaz
  • + 1 author+ 0 author

24 August 2022

The surface properties and color stability of interim crown materials may vary depending on the toothbrushing procedure. This study aimed to investigate the effects of toothbrushing and different toothpastes on the surface roughness (Ra) and color st...

(This article belongs to the Special Issue Materials for Prosthodontics, Restorative Dentistry and Digital Dentistry)
  • Feature Paper
  • Article
  • Open Access
34 Citations
6,737 Views
12 Pages

11 March 2020

Selective laser melting (SLM) in a vacuum environment is a relatively new process. Although the material is expected to undergo a gradual heat change, which will influence the microstructure and creep properties of IN718, little research has been con...

(This article belongs to the Special Issue Advances in Superalloys and High Temperature Intermetallics)
  • Article
  • Open Access
16 Citations
5,135 Views
14 Pages

30 January 2022

This paper aims to test the deterioration of cement stabilized rammed earth and consider its characteristics during its lifespan in various exposure conditions. Both visual and mechanical properties were tested to determine the impact of long-term ex...

(This article belongs to the Special Issue Sustainability in Construction and Building Materials)
  • Article
  • Open Access
2 Citations
954 Views
25 Pages

30 September 2025

The stability of the mine pillar is a key issue related to the safe mining underground. Reinforcing the mine pillar is an important method to improve its stability. To reveal the reinforcement effect and mechanism of concrete-encased mine pillars, la...

  • Article
  • Open Access
23 Citations
4,431 Views
16 Pages

Experimental Investigation on Shear Strength Parameters of Lime Stabilized Loess

  • Liang Jia,
  • Jian Guo,
  • Yanbin Jiang,
  • Yong Fu and ,
  • Zhidong Zhou,
  • Sin Mei Lim and
  • Xiushao Zhao
  • + 2 authors+ 0 author

29 September 2019

Loess is a typical collapsible soil, which is widely distributed in the upper and middle areas around the Yellow River of China. The stabilization of loess with lime provides a significant improvement in the physical and the mechanical characteristic...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
6 Citations
3,388 Views
14 Pages

An Investigation into Performance of Cement-Stabilized Kaolinite Clay with Recycled Seashells Exposed to Sulphate

  • Amin Chegenizadeh,
  • Mahdi Keramatikerman,
  • Faizan Afzal,
  • Hamid Nikraz and
  • Chee Keong Lau

12 October 2020

Sulphate attack is one of the key issues in geotechnical engineering. This study aims to investigate the efficacy of the seashell to reduce negative impacts of the magnesium sulphate concentration on the cement-stabilized clay mixtures by performing...

  • Article
  • Open Access
21 Citations
5,412 Views
17 Pages

Comparative Analysis of Modern 3D-Printed Hybrid Resin-Ceramic Materials for Indirect Restorations: An In Vitro Study

  • Miriam Albrecht,
  • Franziska Schmidt,
  • Franziska Menzel,
  • Jamila Yassine and ,
  • Florian Beuer and
  • Alexey Unkovskiy
  • + 1 author+ 0 author

13 November 2024

The study investigated the impact of aging on surface roughness, color stability, and biocompatibility of hybrid resin-ceramic materials. A total of 225 specimens were produced from three three-dimensional (3D)-printed (HarzLabs Dental Sand Pro (HL),...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
20 Citations
6,373 Views
9 Pages

20 December 2021

This in vitro study compared the effects of conventional and electronic cigarettes on the aesthetics (color stability and translucency) of two types of composite resins: micro and nano-hybrid. Methods: A total of 120 specimens from two different comp...

(This article belongs to the Special Issue The Relationship between Surfaces Coating and Biological, Mechanical and Clinical Behaviour)
  • Article
  • Open Access
3 Citations
3,314 Views
16 Pages

Grouting below Subterranean Water: Erosional Stability Test

  • Jiří Boštík,
  • Lumír Miča,
  • Ivailo Terzijski,
  • Mirnela Džaferagić and
  • Augustin Leiter

30 April 2021

The article is focused on the medium-term negative effect of groundwater on the underground grout elements. This is the physical–mechanical effect of groundwater, which is known as erosion. We conduct a laboratory verification of the erosional resist...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering)
  • Article
  • Open Access
39 Citations
5,138 Views
15 Pages

Effect of Nano-Additives on the Strength and Durability Characteristics of Marl

  • Mehdi Mirzababaei,
  • Jafar Karimiazar,
  • Ebrahim Sharifi Teshnizi,
  • Reza Arjmandzadeh and
  • Sayed Hessam Bahmani

12 October 2021

Low bearing capacity soils may pose serious construction concerns such as reduced bearing capacity and excessive hydro-associated volume changes. Proper soil remediation techniques must be planned and implemented before commencing any construction on...

(This article belongs to the Special Issue Stabilisation and Reinforcement of Clays with Environmentally Friendly Materials)
  • Article
  • Open Access
2 Citations
3,350 Views
12 Pages

9 March 2023

The main thrust of this research was to establish any benefits of mellowing, and the optimal moisture content (OMC) for compacting mellowed sulphate-bearing clay soil undergoing the stabilization process. Two three-day mellowing regimes were carried...

(This article belongs to the Special Issue Functional Cement-Based Composites for Civil Engineering)
  • Article
  • Open Access
1 Citations
541 Views
16 Pages

1 April 2026

This study investigates the mechanical behavior of polyurethane (PU)-stabilized calcareous sand with varying PU contents and relative sand densities using unconfined compression and direct shear tests. The results demonstrate that PU stabilization si...

(This article belongs to the Special Issue Soil Stabilization and Geotechnical Engineering Sustainability)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,626 Views
21 Pages

24 November 2018

In practice, there are some considerations to study stability, reliability, and output power optimization of a thermoelectric thin film operating dynamically. In this study stability and performance of a zinc antimonide thin film thermoelectric (TE)...

(This article belongs to the Special Issue Recent Advances in Thermoelectric Materials)
  • Article
  • Open Access
28 Citations
4,245 Views
16 Pages

Color Stability of Dental Reinforced CAD/CAM Hybrid Composite Blocks Compared to Regular Blocks

  • Yeong-Ah Kang,
  • Han-Ah Lee,
  • Joseph Chang,
  • Wonjoon Moon and ,
  • Shin Hye Chung and
  • Bum-Soon Lim
  • + 1 author+ 0 author

22 October 2020

This study compares the color stability of dental reinforced computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid composite blocks to that of regular blocks. One hundred fifty disc-type specimens (n = 15) were prepared from five sets o...

  • Article
  • Open Access
22 Citations
4,502 Views
15 Pages

Effect of Different Solutions on the Colour Stability of Nanoparticles or Fibre Reinforced PMMA

  • Abdulaziz Alhotan,
  • Alaaeldin Elraggal,
  • Julian Yates,
  • Julfikar Haider and ,
  • Carlos Alberto Jurado and
  • Nikolaos Silikas
  • + 1 author+ 0 author

8 April 2022

This study aimed to evaluate the colour stability of polymethyl methacrylate (PMMA) denture base reinforced with ZrO2 nanoparticles, E-glass fibres, and TiO2 nanoparticles at various concentrations over 180-day storage in Steradent™ (STD) dentu...

(This article belongs to the Special Issue Advanced Polymeric Composites in Dentistry: Synthesis, Properties, and Applications)

of 45