Skip to Content

91 Results Found

  • Article
  • Open Access
293 Views
15 Pages

Comparative Evaluation of HVOF-Sprayed WC-12Co Coatings: Load and Contact Effects on Cross-Sectional Scratch Resistance and Dry Sliding Wear

  • Bauyrzhan Rakhadilov,
  • Nurtoleu Magazov,
  • Aidar Kengesbekov,
  • Małgorzata Rutkowska-Gorczyca and ,
  • Dauir Kakimzhanov and
  • Elvira Akhmetova
  • + 1 author+ 0 author

15 October 2026

WC-12Co coatings deposited by liquid-fuel high-velocity oxy-fuel (HVOF) spraying at kerosene pump frequencies of 33, 35, and 37 Hz were evaluated by cross-sectional scratch testing at 5–25 N and dry sliding at a constant load of 10 N. F35 exhib...

  • Article
  • Open Access
10 Citations
2,760 Views
17 Pages

8 July 2020

The tensile properties, scratch behaviors and sliding wear of an oxide scale obtained on the surface of titanium Grade 2 in the process of isothermal oxidation at 600, 700 and 800 °C were determined in the study. It was shown that the intensity o...

  • Article
  • Open Access
4 Citations
3,843 Views
36 Pages

Acoustic Emission Characteristics of Galling Behavior from Dry Scratch Tests at Slow Sliding Speed

  • Timothy M. Devenport,
  • Ping Lu,
  • Bernard F. Rolfe,
  • Michael P. Pereira and
  • James M. Griffin

4 October 2024

Galling wear, a severe form of wear, is a known problem in sheet metal forming. As the wear state is not directly observable in closed tribosystems, such as in industrial sheet metal forming processes, indirect tool wear monitoring techniques for inf...

  • Article
  • Open Access
17 Citations
4,655 Views
25 Pages

Analysis of the Statistical Comparability of the Hardness and Wear of Polymeric Materials for Orthodontic Applications

  • Ivo Domagała,
  • Krzysztof Przystupa,
  • Marcel Firlej,
  • Daniel Pieniak and ,
  • Leszek Gil,
  • Anna Borucka,
  • Ireneusz Naworol,
  • Barbara Biedziak and
  • Mariana Levkiv
  • + 4 authors+ 0 author

28 May 2021

Background: Clinical success depends on the contact strength and wear resistance of medical devices made of polymer materials. The scientific goal resulted from the problem of using different methods of surface evaluation of materials used in the pro...

(This article belongs to the Special Issue Properties of Dental Restorative Materials)
  • Article
  • Open Access
56 Citations
5,797 Views
18 Pages

Hardness and Wear Resistance of Dental Biomedical Nanomaterials in a Humid Environment with Non-Stationary Temperatures

  • Daniel Pieniak,
  • Agata Walczak,
  • Mariusz Walczak,
  • Krzysztof Przystupa and
  • Agata M. Niewczas

10 March 2020

This study discusses a quantitative fatigue evaluation of polymer–ceramic composites for dental restorations, i.e., commercial material (Filtek Z550) and experimental materials Ex-nano (G), Ex-flow (G). Their evaluation is based on the followin...

  • Article
  • Open Access
32 Citations
6,833 Views
17 Pages

Surface Roughness and Its Effect on Adhesion and Tribological Performance of Magnetron Sputtered Nitride Coatings

  • Pal Terek,
  • Lazar Kovačević,
  • Vladimir Terek,
  • Zoran Bobić and ,
  • Aleksandar Miletić,
  • Branko Škorić,
  • Miha Čekada and
  • Aljaž Drnovšek
  • + 3 authors+ 0 author

9 August 2024

Reports of the influence of surface roughness on the adhesion and tribological performance of contemporary nitride coatings with different layer designs are still scarce in the literature. Therefore, in this study, we evaluated the behavior of a sing...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
3 Citations
3,391 Views
16 Pages

15 June 2021

In a hot rolling process, excessive friction between rollers and steel plates may lead to the formation of scratches on the steel plate. To reduce scratch formation in the finishing mill of the hot rolling process, two techniques are proposed in this...

(This article belongs to the Topic Industrial Robotics)
  • Article
  • Open Access
4 Citations
1,993 Views
14 Pages

17 December 2024

High-energy thermal treatments, such as electron beam irradiation, are crucial for enhancing the performance of tungsten carbide–cobalt (WC-Co) composites in cutting tools and wear-resistant coatings. This study utilizes molecular dynamics simu...

(This article belongs to the Collection Feature Papers Collection in 'Surface Characterization, Deposition and Modification')
  • Article
  • Open Access
1 Citations
3,711 Views
9 Pages

Detection of Scratch on Transparent Plate with Strong Scattering Noise by Digital Holographic Technique

  • Yeh-Wei Yu,
  • Wen-Li Wang,
  • Yong-Sheng Lin,
  • Han-Shin Ko and ,
  • Shih-Hsin Ma,
  • Ching-Cherng Sun,
  • Wen-Hsuan Wu and
  • Tsung-Hsun Yang
  • + 3 authors+ 0 author

11 September 2021

We applied a digital holographic detection technique to detect the scratches on glass surfaces with scattering noise. In the experiment, scratches with widths of 1.67 µm were generated on the front sides of the glass slides, and three different gray...

  • Article
  • Open Access
17 Citations
4,988 Views
16 Pages

Friction and Wear in Stages of Galling for Sheet Metal Forming Applications

  • Timothy M. Devenport,
  • James M. Griffin,
  • Bernard F. Rolfe and
  • Michael P. Pereira

Aluminum is a very commonly used material at present, and roughly half of the produced aluminum products undergo forming during manufacturing. Galling is a severe form of wear that occurs during sheet metal forming operations and is a common failure...

(This article belongs to the Special Issue Wear Behavior of Aluminum Matrix Composite)
  • Article
  • Open Access
16 Citations
4,243 Views
10 Pages

High-Temperature Tribological Performance of Hard Multilayer TiN-AlTiN/nACo-CrN/AlCrN-AlCrO-AlTiCrN Coating Deposited on WC-Co Substrate

  • Asad Alamgir,
  • Maxim Yashin,
  • Andrei Bogatov,
  • Mart Viljus and ,
  • Rainer Traksmaa,
  • Jozef Sondor,
  • Andreas Lümkemann,
  • Fjodor Sergejev and
  • Vitali Podgursky
  • + 4 authors+ 0 author

22 September 2020

Mechanical and tribological properties of the hard-multilayer TiN-AlTiN/nACo-CrN/AlCrN-AlCrO-AlTiCrN coating deposited on WC-Co substrate were investigated. The sliding tests were carried out using ball-on-disc tribometer at room (25 °C) and high...

(This article belongs to the Section Ceramic Coatings and Engineering Technology)
  • Article
  • Open Access
7 Citations
3,146 Views
12 Pages

In recent years, research on hydroxyapatite (HA) coatings has been driven by the demands of clinical applications. However, the intrinsic brittleness of HA limits its potential in the use for the load-bearing implant. To improve mechanical properties...

(This article belongs to the Special Issue Surface Engineering for Friction and Wear Reduction)
  • Article
  • Open Access
5 Citations
1,166 Views
18 Pages

Evaluation of the Effectiveness of Surface Defect Removal by Slide Burnishing

  • Agnieszka Skoczylas,
  • Kazimierz Zaleski and
  • Jakub Matuszak

1 July 2025

This study determines the influence of technological parameters of slide burnishing on the size of surface defects (scratches). The experiment was performed on ring-shaped samples of C45 steel. The samples had scratches made on their surface with a n...

(This article belongs to the Special Issue Application of Diamond Burnishing to Improve the Performance of Materials)
  • Article
  • Open Access
5 Citations
1,501 Views
20 Pages

Micromechanical Properties and Tribological Performance of Mo, Cr, and Ta Coatings Obtained by Cathodic Arc-Deposition

  • Vadim Zakiev,
  • Volodymyr Nadtoka,
  • Islam Zakiev,
  • Bohdan Mordyuk and ,
  • Oleksandr Yakushenko,
  • Igor Trofimov,
  • Mykola Skoryk and
  • Sviatoslav Yutskevych
  • + 3 authors+ 0 author

19 March 2025

The aim of the study is a comparative analysis of micromechanical and microtribological properties of the cathodic arc-deposited Mo, Cr, and Ta coatings using nanoindentation and scratch test techniques as well as a microtribological dry sliding test...

(This article belongs to the Special Issue Additive Manufacturing of Metallic Components for Hard Coatings, 2nd Edition)
  • Article
  • Open Access
1,572 Views
24 Pages

26 May 2025

During the temper rolling process, scratch defects on the lower surface of the steel strip caused by the tension measuring roller are a critical issue that affects the resulting product quality. Previous research has been limited to analyzing the mec...

  • Article
  • Open Access
4 Citations
3,426 Views
15 Pages

22 November 2021

This article describes the modification of UV-curable coatings with silicon aluminum oxynitride (Sialon) and aluminum oxide (Alu C), which improve the hydrophobicity of the coating surface and the scratch hardness. The contact angle is greater due to...

  • Article
  • Open Access
2 Citations
5,404 Views
22 Pages

Comparative Study on the Wear Resistance of C&B-Type Polymer Materials for Temporary Crowns Manufactured Using 3D DLP Printing Technology

  • Marcel Firlej,
  • Daniel Pieniak,
  • Andrzej Snarski-Adamski,
  • Barbara Biedziak and ,
  • Agata Niewczas,
  • Jana Petru,
  • Jonas Matijošius,
  • Zbigniew Krzysiak and
  • Katarzyna Zaborowicz
  • + 4 authors+ 0 author

5 December 2025

DLP (Digital Light Processing) 3D printing enables precise fabrication of temporary crowns. Tribological properties of these materials affect clinical durability, wear resistance, and masticatory function. This study compared three C&B-type photo...

(This article belongs to the Special Issue Evaluation of the Surface Topography, Abrasive Processing, and Precision Machining Technology and Applications)
  • Article
  • Open Access
65 Citations
7,459 Views
16 Pages

Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

  • Mirosław Szala,
  • Mariusz Walczak,
  • Kamil Pasierbiewicz and
  • Mariusz Kamiński

The resistance to cavitation erosion and sliding wear of stainless steel grade AISI 304 can be improved by using physical vapor deposited (PVD) coatings. The aim of this study was to investigate the cavitation erosion and sliding wear mechanisms of m...

(This article belongs to the Special Issue Selected Papers from the 1st Coatings and Interfaces Web Conference (CIWC-1))
  • Article
  • Open Access
6 Citations
3,531 Views
14 Pages

Simulation and Experimental Research on the Failure of Marine Sliding Bearings

  • Fengming Du,
  • Dawei Li,
  • Mingxing Hao,
  • Yang Yu and
  • Weiwei Wang

The performance of the marine sliding bearing affects the reliability of marine engineering directly. Nevertheless, sliding bearings are subjected to frictional forces and problems, such as wear and fatigue, that occur after long-term use, which lead...

(This article belongs to the Special Issue Failure Analysis of Marine Structure II)
  • Article
  • Open Access
23 Citations
5,578 Views
13 Pages

17 January 2022

To increase the lifetime of metallic molds and protect their surface from wear, a fluorinated ethylene propylene (FEP) polymer was coated onto a stainless-steel (SS304) substrate, using an air spray process followed by a heat treatment. The microstru...

(This article belongs to the Special Issue Rheology and Processing of Polymers)
  • Article
  • Open Access
4 Citations
2,477 Views
16 Pages

Occurrence of Grease Lubricated Impact-Sliding Composite Wear

  • Zhendong Lv,
  • Yiming Han,
  • Rui Zhang and
  • Jing Wang

28 October 2022

In industrial chain drives, the sleeve slides on the pin and impact loading occurs due to the polygon effect, while the collision between the ball and cage usually produces an impact-sliding motion in the rolling element bearings. Aiming at addressin...

(This article belongs to the Special Issue State-of-the-Art of Tribology in China)
  • Article
  • Open Access
19 Citations
4,483 Views
17 Pages

Effect of Strain Rate on the Deformation Characteristic of AlN Ceramics under Scratching

  • Shang Gao,
  • Honggang Li,
  • Renke Kang,
  • Yu Zhang and
  • Zhigang Dong

12 January 2021

To clarify the influence mechanism of strain rate effect on deformation characteristics of aluminum nitride (AlN) ceramics, some varied-velocity nanoscratching tests were carried out using a Berkovich indenter in this paper. The deformation character...

(This article belongs to the Special Issue Micro and Nano Machining Processes)
  • Article
  • Open Access
4 Citations
3,677 Views
17 Pages

An Investigation into the Densification-Affected Deformation and Fracture in Fused Silica under Contact Sliding

  • Changsheng Li,
  • Yushan Ma,
  • Lin Sun,
  • Liangchi Zhang and ,
  • Chuhan Wu,
  • Jianjun Ding,
  • Duanzhi Duan,
  • Xuepeng Wang and
  • Zhandong Chang
  • + 4 authors+ 0 author

14 July 2022

Subsurface damage of fused silica optics is one of the major factors restricting the performance of optical systems. The densification-affected deformation and fracture in fused silica under a sliding contact are investigated in this study, via three...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining, Volume II)
  • Article
  • Open Access
3 Citations
2,067 Views
19 Pages

Wear Characteristics Caused by Ti3AlC2 Particles under Impact-Sliding Conditions in Marine Engine

  • Jie Liu,
  • Yan Shen,
  • Zhixiang Liu,
  • Baihong Yu and ,
  • Jinghao Qu,
  • Leize Li and
  • Guogang Zhang
  • + 2 authors+ 0 author

7 October 2024

With the marine industry’s demands for carbon reduction and increased reliability, the friction and wear performance of marine engines is becoming increasingly important. MAX phase materials show great potential in marine engine tribopair mater...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
20 Citations
5,700 Views
16 Pages

15 October 2021

Data classification in streams where the underlying distribution changes over time is known to be difficult. This problem—known as concept drift detection—involves two aspects: (i) detecting the concept drift and (ii) adapting the classifier. Online...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
30 Citations
5,930 Views
13 Pages

Wear Evolution of the Glass Fiber-Reinforced PTFE under Dry Sliding and Elevated Temperature

  • Ruoxuan Huang,
  • Siqi Ma,
  • Meidi Zhang,
  • Jie Yang and ,
  • Dehong Wang,
  • Liang Zhang and
  • Jiujun Xu
  • + 2 authors+ 0 author

2 April 2019

The wear evolution of the glass fiber reinforced Polytetrafluoroethylene (PTFE) sliding against duplex steel at elevated temperature was investigated using the interrupted wear tests coupling with the worn surface observations. The morphological chan...

(This article belongs to the Special Issue Tribology of Materials and Analysis)
  • Article
  • Open Access
7 Citations
3,798 Views
21 Pages

This work characterises the structure and mechanical properties, such as adhesion, of two different chemical vapour deposition (CVD) coatings deposited onto silicon aluminium oxynitride (Si3N4 + Al2O3 + Y2O3) round (RNGN) milling cutter tooling inser...

(This article belongs to the Special Issue Advances in Metal Cutting and Cutting Tools)
  • Article
  • Open Access
11 Citations
2,661 Views
12 Pages

Printing Direction Effects on the Sliding Contact Response of a Binder Jetting 3D-Printed WC-Co Hardmetal

  • Laura Cabezas,
  • Christian Berger,
  • Emilio Jiménez-Piqué,
  • Johannes Pötschke and
  • Luis Llanes

20 June 2024

Binder jetting additive manufacturing offers a promising route to produce complex geometries in cemented carbides (WC-Co), but it may introduce direction-dependent microstructural variations potentially affecting wear resistance. This study investiga...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
7 Citations
3,442 Views
16 Pages

5 September 2019

In this paper, a two-step method, rapid-flow mixing followed by high-pressure compositing was used to prepare a macro-ZTA (ZrO2-toughened Al2O3) particles reinforced high chromium cast iron (HCCI) matrix composite. The method is based on the squeeze...

  • Article
  • Open Access
11 Citations
4,562 Views
14 Pages

28 May 2021

Superhydrophobic surfaces have been extensively studied for their unique interfacial interaction between water and the surface, and they can be used for self-cleaning, drag reduction, anti-icing, and other applications. To make the superhydrophobic s...

(This article belongs to the Section J: Thermal Management)
  • Feature Paper
  • Article
  • Open Access
7 Citations
2,718 Views
15 Pages

28 December 2023

Emerging laser precision machining, particularly using pulsed lasers, enlightens the innovation and functionalization of cemented carbides. These backbone materials of the tooling industry are usually considered difficult to machine or shape using co...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Improving Structural Integrity of Metals: From Bulk to Surface)
  • Article
  • Open Access
7 Citations
2,188 Views
17 Pages

28 November 2022

The article presents the dependence of the morphology as well as micromechanical and sclerometric properties of Al2O3 layers on the parameters of anodizing of aluminum alloys. The oxide layers were produced on the EN AW-5251 aluminum alloy by means o...

(This article belongs to the Special Issue Anodized Materials and Their Applications)
  • Article
  • Open Access
8 Citations
5,069 Views
11 Pages

In this work, three case studies are reported, namely carbon nanotube/polyvinyl butyral composites, MWCNTs/polydimethylsiloxane-based coatings and vertically aligned CNT forest array, of which the friction and resistance to wear/deformation were asse...

  • Article
  • Open Access
21 Citations
4,654 Views
12 Pages

2 May 2022

In this study, the friction and wear characteristics of polydimethylsiloxane (PDMS) were evaluated when using lubricants created by adding surfactants at various ratios to deionized (DI) water. When pure DI water is used as a lubricant, the repulsion...

(This article belongs to the Special Issue Mechanical and Tribological Properties of Advanced Materials and Coatings)
  • Article
  • Open Access
806 Views
20 Pages

13 March 2026

Slippery lubricant-infused surfaces (SLIPS) suffer from rapid lubricant depletion, severely limiting their durability in practical applications. To overcome this, we propose a laser-engineered hierarchical architecture that physically locks a solid p...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
27 Citations
5,017 Views
15 Pages

Facile Fabrication of a Superhydrophobic Surface with Robust Micro-/Nanoscale Hierarchical Structures on Titanium Substrate

  • Shuliang Dong,
  • Zhenlong Wang,
  • Libao An,
  • Yaogang Li and ,
  • Baozhong Wang,
  • Hongchao Ji and
  • Han Wang
  • + 2 authors+ 0 author

31 July 2020

A superhydrophobic surface with robust structures on a metallic surface could improve its application in various harsh conditions. Herein, we developed a new strategy to fabricate robust micro-/nanoscale hierarchical structures with electrical discha...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Communication
  • Open Access
1,227 Views
11 Pages

Oxygen Addition Influence on NiCrFe Mixed Layer

  • Bianca-Georgiana Solomonea,
  • Alexandru Anghel,
  • Cristian P. Lungu,
  • Cornel Staicu and ,
  • Bogdan Butoi,
  • Corneliu Porosnicu,
  • Paul Dincă,
  • Oana Pompilian,
  • Arcadie Sobetkii and
  • Catalin Vitelaru
  • + 9 authors+ 4 authors

12 January 2026

Carbon–metal composite NiCrFeC coatings, prepared with and without controlled oxygen addition, were investigated to evaluate the influence of oxygen on the structure, mechanical response, and tribological performance. X-ray diffraction revealed...

(This article belongs to the Special Issue Advanced Corrosion- and Wear-Resistant Coatings)
  • Article
  • Open Access
808 Views
14 Pages

Surface Integrity of Pure AW-1370 and TiC-Reinforced Aluminum WAAM Wires Under Unidirectional Sliding Contact

  • Nuria Cuadrado,
  • Giselle Ramirez,
  • Alejandra Torres,
  • J. Antonio Travieso-Rodriguez and ,
  • Jordi Llumà,
  • Geir Kvam-Langelandsvik,
  • Ida Westermann and
  • Montserrat Vilaseca
  • + 3 authors+ 0 author

5 May 2026

Wire arc additive manufacturing (WAAM) demands aluminum feedstock with tightly controlled diameter and high surface integrity. Adding hard TiC nanoparticles is a viable route to enhance the mechanical response of Al wires, yet the associated increase...

(This article belongs to the Special Issue Additive Manufacturing of Metal Matrix Composite Materials and Light Alloys)
  • Article
  • Open Access
6 Citations
2,390 Views
15 Pages

29 January 2022

The article presents the effect of the thermo-chemical treatment of Al2O3 layers on their nanostructure, surface morphology, chemical composition as well as their micromechanical and sclerometric properties. Oxide layers were produced on EN AW-5251 a...

(This article belongs to the Special Issue Anodized Materials and Their Applications)
  • Article
  • Open Access
5 Citations
3,207 Views
17 Pages

29 June 2020

The microstructure, mechanical properties, and friction-wear performance of (TiBx/TiSiyCz)x3 multilayer coatings deposited on the M2 steel by the pulsed laser deposition are investigated in detail in as-deposited state and after annealing at 500 °...

(This article belongs to the Special Issue Surface Function Enhancement Film and Coating Technology)
  • Article
  • Open Access
4 Citations
2,614 Views
12 Pages

8 August 2024

Railway transportation has been integrated into people’s lives. According to the “Notice on the release of the General Technical Specification of High-speed Railway Power Supply Safety Testing (6C System) System” issued by the Natio...

(This article belongs to the Special Issue Communications and Networking Based on Artificial Intelligence)
  • Article
  • Open Access
10 Citations
4,379 Views
14 Pages

Friction Behaviors and Wear Mechanisms of Carbon Fiber Reinforced Composites for Bridge Cable

  • Guijun Xian,
  • Xiao Qi,
  • Rui Guo,
  • Jingwei Tian and ,
  • Huigang Xiao and
  • Chenggao Li
  • + 1 author+ 0 author

9 December 2024

Carbon fiber reinforced epoxy resin composites (CFRP) demonstrate superior wear resistance and fatigue durability, which are anticipated to markedly enhance the service life of structures under complex conditions. In the present paper, the friction b...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
8 Citations
3,751 Views
18 Pages

24 November 2022

CrN coatings are widely used in the industry due to their excellent mechanical features and outstanding wear and corrosion resistance. Using scratch and ball-on-disk wear tests, the current study deals with the tribological characterisation of CrN co...

(This article belongs to the Special Issue Ceramic Coatings for High-Temperature Applications)
  • Feature Paper
  • Article
  • Open Access
28 Citations
5,591 Views
19 Pages

Dry Sliding Behavior of an Aluminum Alloy after Innovative Hard Anodizing Treatments

  • Chiara Soffritti,
  • Annalisa Fortini,
  • Anna Nastruzzi,
  • Ramona Sola and ,
  • Mattia Merlin and
  • Gian Luca Garagnani
  • + 1 author+ 0 author

14 June 2021

This work evaluates the dry sliding behavior of anodic aluminum oxides (AAO) formed during one traditional hard anodizing treatment (HA) and two golden hard anodizing treatments (named G and GP, respectively) on a EN AW-6060 aluminum alloy. Three dif...

(This article belongs to the Special Issue Surface Modification of Metallic Materials)
  • Article
  • Open Access
19 Citations
3,627 Views
14 Pages

Fabrication of a Low Adhesive Superhydrophobic Surface on Ti6Al4V Alloys Using TiO2/Ni Composite Electrodeposition

  • Jianbing Meng,
  • Xiaojuan Dong,
  • Yugang Zhao,
  • Rufeng Xu and ,
  • Xue Bai and
  • Haian Zhou
  • + 1 author+ 0 author

13 February 2019

A superhydrophobic surface with low adhesion and good wear resistance was fabricated on Ti6Al4V substrates via TiO2/Ni composite electrodeposition, and subsequently modified with a fluoroalkylsilane (FAS) film. Scanning electron microscopy (SEM), ene...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
37 Citations
7,524 Views
14 Pages

Low-Temperature Self-Healing of a Microcapsule-Type Protective Coating

  • Dong-Min Kim,
  • Yu-Jin Cho,
  • Ju-Young Choi,
  • Beom-Jun Kim and ,
  • Seung-Won Jin and
  • Chan-Moon Chung
  • + 1 author+ 0 author

14 September 2017

Low-temperature self-healing capabilities are essential for self-healing materials exposed to cold environments. Although low-temperature self-healing concepts have been proposed, there has been no report of a microcapsule-type low-temperature self-h...

  • Article
  • Open Access
15 Citations
5,079 Views
23 Pages

Investigation of Galling Wear Using Acoustic Emission Frequency Characteristics

  • Vignesh. V. Shanbhag,
  • Bernard. F. Rolfe and
  • Michael. P. Pereira

In the sheet metal stamping process, during sliding contact between the tool and sheet, it is expected that severe events such as tool wear or fracture on the sheet generate acoustic emission (AE) burst waveforms. Attempts have been made in the liter...

(This article belongs to the Special Issue Acoustic Emission Techniques in Wear Monitoring)
  • Article
  • Open Access
18 Citations
4,626 Views
18 Pages

A Novel Evolving Type-2 Fuzzy System for Controlling a Mobile Robot under Large Uncertainties

  • Ayad Al-Mahturi,
  • Fendy Santoso,
  • Matthew A. Garratt and
  • Sreenatha G. Anavatti

10 March 2023

This paper presents the development of a type-2 evolving fuzzy control system (T2-EFCS) to facilitate self-learning (either from scratch or from a certain predefined rule). Our system has two major learning stages, namely, structure learning and para...

(This article belongs to the Section Intelligent Robots and Mechatronics)
  • Article
  • Open Access
946 Views
20 Pages

Microstructure Influence on the Dry Sliding Wear Behavior of Cr2O3–nTiO2 APS Coatings

  • Daniel Cristișor,
  • Corneliu Munteanu,
  • Daniela-Lucia Chicet,
  • Marcelin Benchea and ,
  • Alina-Corina Dumitrașcu and
  • Adi-Mihăiță Velniciuc
  • + 1 author+ 0 author

1 April 2026

Cr2O3-based ceramic coatings are widely used in wear-critical applications; however, their tribological performance under dry sliding conditions can be limited by brittleness and frictional instability. In heavy-duty vehicles, the king pin–bush...

  • Article
  • Open Access
821 Views
38 Pages

Primer Adhesion on Laser-Textured AA2024-T3: Effects of Texture Geometry via Reciprocating Sliding Tests

  • Özer Coşkun,
  • Sinan Fidan,
  • Mustafa Özgür Bora,
  • Satılmış Ürgün and ,
  • Mehmet İskender Özsoy and
  • Yezen Kandur
  • + 1 author+ 0 author

29 April 2026

To improve coating adhesion and tribological stability on aircraft-grade aluminum, this work utilizes periodic fiber-laser microtexts as a surface-engineering pre-treatment before applying an epoxy primer. AA2024-T3 panels were imprinted with rhombus...

(This article belongs to the Section Metal Surface Process)

of 2