Skip to Content

482 Results Found

  • Review
  • Open Access
4 Citations
3,335 Views
47 Pages

2 November 2023

Staudinger taught us that macromolecules were made up of covalently bonded monomer repeat units chaining up as polymer chains. This paradigm is not challenged in this paper. The main question raised in polymer physics remains: how do these long chain...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Polymer Physics and Theory)
  • Article
  • Open Access
1 Citations
1,794 Views
12 Pages

4 September 2023

Despite the dozens of earlier research verifications, the contribution of shearing of molten metallic alloys during their solidification to grain formation is still ambiguous. Also, modeling of this phenomenon has received very little attention. Expe...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
22 Citations
4,556 Views
15 Pages

10 May 2021

The Friction-Assisted Lateral Extrusion Process (FALEP) is a severe plastic deformation (SPD) technique for producing metal sheets from bulk metal or powder in one single deformation step at room temperature. In the present work, aluminum Al-1050 was...

  • Article
  • Open Access

18 November 2026

Cladding and repair processes require strong bonding between the deposited material and the original substrate. Additive Friction Stir Deposition (AFSD) is a promising solid-state process for these applications, but the local bonding strength of AFSD...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
16 Citations
5,775 Views
13 Pages

17 January 2018

Asymmetrical shear rolling with velocity asymmetry and geometry asymmetry is beneficial to enlarge deformation and refine grain size at the center of the thick plate compared to conventional symmetrical rolling. Dynamic recrystallization (DRX) plays...

(This article belongs to the Special Issue Dynamic Recrystallization and Microstructural Evolution in Alloys)
  • Article
  • Open Access
3 Citations
1,783 Views
17 Pages

Using the Radial-Shear Rolling Method for Casted Zirconium Alloy Ingot Structure Improvement

  • Alexandr Arbuz,
  • Fedor Popov,
  • Alexandr Panichkin,
  • Anna Kawałek and ,
  • Nikita Lutchenko and
  • Kirill Ozhmegov
  • + 1 author+ 0 author

18 October 2024

In developing materials for the nuclear industry, it is crucial to enhance both alloy composition and processing methods. This study focuses on investigations of applying radial-shear rolling (RSR) to a Zr-1%Nb alloy ingot, aiming to refine its micro...

(This article belongs to the Special Issue Precision Manufacturing of Advanced Alloys and Composites)
  • Article
  • Open Access
15 Citations
4,940 Views
17 Pages

3 February 2021

Droplets composed of two different materials, or Janus droplets, have diverse applications, including microfluidic digital laboratory systems, DNA chips, and self-assembly systems. A three-dimensional computational study of Janus droplet formation in...

(This article belongs to the Special Issue Non-Newtonian Microfluidics)
  • Article
  • Open Access
18 Citations
3,148 Views
23 Pages

31 March 2022

A new nanocomposite piezoelectromagnetic plate model is developed for studying free vibration based on a refined shear deformation theory (RDPT). The present model is composed of piezoelectromagnetic material reinforced with functionally graded graph...

(This article belongs to the Special Issue Photovoltaic Functional Crystals and Ceramics)
  • Article
  • Open Access
9 Citations
5,399 Views
30 Pages

16 November 2019

The present work focuses on the formulation and numerical assessment of a family of C0 quadrilateral plate elements based on the refined zigzag theory (RZT). Specifically, four quadrilateral plate elements are developed and numerically tested: The cl...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2019)
  • Article
  • Open Access
12 Citations
5,898 Views
23 Pages

Characterization of the Aeration and Hydrodynamics in Vertical-Wheel™ Bioreactors

  • Pedro M. Neto,
  • Diogo E. S. Nogueira,
  • Yas Hashimura,
  • Sunghoon Jung and ,
  • Bruno Pedras,
  • Mário N. Berberan-Santos,
  • Tiago Palmeira,
  • Brian Lee,
  • Joaquim M. S. Cabral and
  • Carlos A. V. Rodrigues
  • + 6 authors+ 1 author

In this work, the oxygen transport and hydrodynamic flow of the PBS Vertical-Wheel MINI™ 0.1 bioreactor were characterized using experimental data and computational fluid dynamics simulations. Data acquired from spectroscopy-based oxygenation m...

(This article belongs to the Topic Bioreactors for Advanced Cell Culture, (Nano)toxicity, Regenerative Medicine and Organ Bioengineering)
  • Article
  • Open Access
80 Citations
6,958 Views
25 Pages

26 July 2019

A refined simple first-order shear deformation theory is developed to investigate the static bending and free vibration of advanced composite plates such as functionally graded plates. By introducing the new distribution shape function, the transvers...

(This article belongs to the Special Issue Mechanical Behavior of Composite Materials)
  • Article
  • Open Access
1,019 Views
22 Pages

13 August 2026

The free vibration behaviour of functionally graded (FG) doubly curved nanoshells is explored by adopting a refined first-order shear deformation theory (FSDT) formulated with only four displacement variables. The presented kinematic model, which dec...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
10 Citations
5,769 Views
14 Pages

7 May 2018

This paper examines the effect of ultrasonic vibration (USV) on grain size and interrupted porosity in Gas Tungsten Arc (GTA) spot-welded copper. Grain size was refined by perpendicularly attaching a transducer to the welded sheet and applying USV to...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
2,163 Views
18 Pages

18 March 2021

In the rolling process of heavy cylinders, the deformation section is subjected to the effects of compression and shear. In order to analyze the influences of the shear effect on the microstructure evolution characteristics, a mathematical model was...

  • Article
  • Open Access
13 Citations
4,526 Views
12 Pages

Insights into Machining of a β Titanium Biomedical Alloy from Chip Microstructures

  • Damon Kent,
  • Rizwan Rahman Rashid,
  • Michael Bermingham,
  • Hooyar Attar and ,
  • Shoujin Sun and
  • Matthew Dargusch
  • + 1 author+ 0 author

11 September 2018

New metastable β titanium alloys are receiving increasing attention due to their excellent biomechanical properties and machinability is critical to their uptake. In this study, machining chip microstructure has been investigated to gain an unde...

(This article belongs to the Special Issue Titanium Alloys for Biomedical Implants and Devices)
  • Article
  • Open Access
12 Citations
3,594 Views
13 Pages

28 May 2020

This paper reports the effect of the processing route on the microstructure and mechanical properties in the pure copper sheets processed by single-roll angular-rolling (SRAR). The SRAR process was repeated up to six passes in two processing routes,...

(This article belongs to the Special Issue Materials by Non-traditional Methods of Severe Plastic Deformation (Spd))
  • Article
  • Open Access
7 Citations
5,715 Views
11 Pages

29 September 2017

Based on electron backscattered diffraction analysis and transmission electron microscopy observation, the mechanism of inhomogeneous grain refinement in a NiTiFe shape memory alloy (SMA) subjected to single-pass equal-channel angular extrusion (ECAE...

(This article belongs to the Special Issue Advances in Plastic Forming of Metals)
  • Article
  • Open Access
5 Citations
2,729 Views
22 Pages

Shear Behaviour and Calculation Methods of Bearing-Shear Connectors for Prefabricated Steel–Concrete Composite Beams

  • Zhichao Zheng,
  • Yang Zou,
  • Yaling Chou,
  • Fengjiang Qin and ,
  • Fengmin Chen,
  • Jin Di and
  • Zhigang Zhang
  • + 2 authors+ 0 author

26 June 2023

The bearing-shear connector (B-SC) is a newly developed connector that exhibits excellent shear behaviour and is easy to process. However, research on the application of B-SCs as substitutes for grouped studs in prefabricated steel–concrete com...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
7 Citations
2,333 Views
11 Pages

30 October 2024

This work focuses on the effects of ultrasonic shot peening (USP) on grain refinement and orientation behavior in the surface region of GH4151 superalloy. The microstructure evolution of the alloy under USP durations were studied. The effects of USP-...

(This article belongs to the Special Issue Effects of Surface Layer Modification on Fatigue, Corrosion and Wear Behavior of Metallic Materials)
  • Article
  • Open Access
17 Citations
4,566 Views
15 Pages

Microstructure Evolution and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloys Processed by High-Pressure Torsion

  • Fanghui Wang,
  • Chaogang Ding,
  • Zhiqin Yang,
  • Hao Zhang and ,
  • Ziheng Ding,
  • Hushan Li,
  • Jie Xu,
  • Debin Shan and
  • Bin Guo
  • + 4 authors+ 0 author

17 June 2024

High-entropy alloys (HEAs) have garnered significant attention for their exceptional properties, with eutectic high-entropy alloys (EHEAs) emerging as particularly notable due to their incorporation of eutectic structures comprising soft and hard pha...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,740 Views
11 Pages

14 September 2022

When casting aluminum alloy billets, high shear melt conditioning (HSMC) technology refines the resulting grain size, reduces the number of defects, and improves mechanical properties without the need to add polluting and expensive chemical grain ref...

(This article belongs to the Special Issue Phase Transition in External Fields)
  • Article
  • Open Access
11 Citations
5,093 Views
20 Pages

Plastic Behavior and Microstructure Heterogeneity of an AA6063-T6 Aluminum Alloy Processed by Symmetric and Asymmetric Rolling

  • Jairo Alberto Muñoz,
  • Tarek Khelfa,
  • Gonzalo Ariel Duarte,
  • Martina Avalos and ,
  • Raúl Bolmaro and
  • José María Cabrera
  • + 1 author+ 0 author

20 September 2022

Rolling is one of the most employed industrial processes which can be used at multiple manufacturing stages, allowing different geometries such as plates, rods, profiles, billets, slabs, tubes, and seamless tubes to be obtained. However, rolled produ...

(This article belongs to the Special Issue Plastic Forming, Microstructure, and Property Optimization of Metals)
  • Article
  • Open Access
12 Citations
2,584 Views
14 Pages

Obtaining an Equiaxed Ultrafine-Grained State of the Longlength Bulk Zirconium Alloy Bars by Extralarge Shear Deformations with a Vortex Metal Flow

  • Alexandr Arbuz,
  • Anna Kawalek,
  • Kirill Ozhmegov,
  • Evgeniy Panin and ,
  • Medet Magzhanov,
  • Nikita Lutchenko and
  • Vasily Yurchenko
  • + 2 authors+ 0 author

25 January 2023

The method of radial shear rolling makes it possible to achieve comparable to high pressure torsion (HPT) method ultrahigh degrees of total strain level in combination with the vortex metal flow character for long-length large bulk bars unable by HPT...

(This article belongs to the Special Issue Advanced Processing Methods for Metals and Their Alloys)
  • Article
  • Open Access
1 Citations
1,426 Views
19 Pages

The present research aims to the evaluation of the deformation capacity of existing reinforced concrete shear walls designed with past non-conforming seismic regulations. A refined analytical model (referred to as the Proposed Model) is presented for...

(This article belongs to the Section Structural and Earthquake Engineering)
  • Review
  • Open Access
201 Citations
11,900 Views
29 Pages

10 July 2018

In this review, severe plastic deformation (SPD) is considered as a materials processing technology. The deformation mode is the principal characteristic differentiating SPD techniques from common forming operations. For large plastic strains, deform...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
598 Views
29 Pages

Shear Lag Effect Analysis of GFRP Composite Truss Web Girder Bridge

  • Dongyan Xue,
  • Rui Chu,
  • Zhifeng Yuan and
  • Zheng Xiao

25 February 2026

To clarify the shear lag effect and flexural performance of glass fiber-reinforced polymer (GFRP) composite truss web girder bridges and verify the feasibility of substituting steel truss webs with GFRP members, a refined finite element (FE) model wa...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
3 Citations
3,587 Views
14 Pages

5 December 2019

Shear localization is the main deformation mode for the near beta titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe loaded at high strain rates at either room temperature or cryogenic temperature. Nanoindentation, transmission electron microscopy, and high-resolu...

(This article belongs to the Collection Alloy and Process Development of Light Metals)
  • Article
  • Open Access
412 Views
25 Pages

Accurate prediction of aggregation in suspensions is crucial for diverse engineering applications. This paper develops a sequential theoretical strategy, based on tunnel theory, to predict the aggregation configuration in magnetic compound fluids (MC...

(This article belongs to the Section Electronic Materials, Devices and Applications)
  • Article
  • Open Access
25 Citations
4,758 Views
18 Pages

31 October 2018

In this study, the buckling of functionally graded (FG) nanoporous metal foam nanoplates is investigated by combining the refined plate theory with the non-local elasticity theory. The refined plate theory takes into account transverse shear strains...

  • Article
  • Open Access
705 Views
16 Pages

Influence of Bolt Arrangement on the Shear Performance of Circumferential Joints of Segments in Super-Large Cross-Section Shield Tunnels

  • Haijun Wang,
  • Wei Qiu,
  • Linjian Su,
  • Shaoyi Yang and ,
  • Yi Xie,
  • Bohan Wu and
  • Luxiang Wu
  • + 2 authors+ 0 author

28 November 2025

To evaluate the shear performance of circumferential joints in super-large cross-section shield tunnels featuring inclined bolts and distributed mortises and tenons, refined numerical models were developed for three distinct configurations: single-bo...

(This article belongs to the Special Issue Solid Mechanics as Applied to Civil Engineering)
  • Article
  • Open Access
3 Citations
2,274 Views
17 Pages

20 March 2024

Extensive research has shown that nanolayered structures are capable of suppressing the shear banding in metallic glass in nanoindentation experiments. However, the specific mode and mechanism of the shear banding underneath the indenter remains unkn...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
284 Views
24 Pages

Geometry-Dependent Transverse Shear Stiffness of Corrugated Board

  • Tomasz Garbowski,
  • Anna Knitter-Piątkowska,
  • Jolanta Pozorska and
  • Tomasz Stręk

10 October 2026

This study examines how flute shape and geometric proportions govern the effective transverse shear stiffness of corrugated-board cores. Six profiles are compared at common nominal dimensions and material properties using a strain-energy estimate, th...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
5 Citations
3,562 Views
20 Pages

4 September 2023

Small-to-medium-span girder bridges equipped with shear keys play a significant role in the Chinese highway bridge system. However, shear key failure was observed during the 2008 Wenchuan earthquake, which resulted in excessive superstructure displac...

(This article belongs to the Topic Condition Perception and Performance Evaluation of Engineering Structures)
  • Article
  • Open Access
566 Views
22 Pages

10 July 2026

The present research proposes a mathematical method to examine the combined impacts of thermal loading and nonlocal elasticity on the dynamic behavior of functionally graded (FG) nanobeams. A refined higher-order shear deformation theory is introduce...

(This article belongs to the Section Theory and Simulation of Nanostructures)
  • Article
  • Open Access
8 Citations
2,854 Views
12 Pages

Micro-Mechanisms of Shear Deformation Localization of Ti6Al4V Alloy under Shear-Compressive Loading Conditions

  • Lintao Li,
  • Tao Jin,
  • Fei Shuang,
  • Zhiqiang Li and ,
  • Zhihua Wang and
  • Wei Ma
  • + 1 author+ 0 author

10 December 2020

Titanium Ti6Al4V alloy is a superior material that has extremely high strength, hardness and good anti-corrosion resistance. Dynamic shear-compression experiments were carried out on the alloy to investigate the micro-mechanisms of adiabatic shear ba...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Alloys)
  • Article
  • Open Access
677 Views
17 Pages

6 February 2026

The shear design of concrete members reinforced with Carbon Fiber Reinforced Polymer (CFRP) bars remains a key hurdle for engineers. This study experimentally investigates the shear behavior of normal-strength concrete members reinforced with CFRP ba...

(This article belongs to the Special Issue Research on Sustainable Materials in Building and Construction)
  • Article
  • Open Access
2 Citations
1,925 Views
20 Pages

Influence of Improved Particle Breakage Index on Deformation Strength Characteristics of Soil-Rock Mixtures

  • Ping Xu,
  • Zeliang Chen,
  • Lingyun Fang,
  • Zengguang Xu and ,
  • Qingwei Lin and
  • Zhilong Liu
  • + 1 author+ 0 author

5 July 2024

A large-scale triaxial shear test was performed on a waste slag dam created from the accumulation of waste slag during the construction of a pumped-storage power station. By integrating previous experience, the particle breakage index was refined to...

  • Article
  • Open Access
9 Citations
4,412 Views
17 Pages

26 July 2018

In this study, for the first time, the effect of large non-monotonic simple shear strains on the uniformity of the tensile properties of pure Cu specimens was studied and justified by means of microstructural and textural investigations. A process ca...

(This article belongs to the Special Issue Processing-Structure-Property Relationships in Metals)
  • Article
  • Open Access
3 Citations
2,244 Views
20 Pages

Study on Torsional Shear Deformation Characteristics of Segment Joints Under the Torque Induced by Tunnel Boring Machine Construction

  • Jie Chen,
  • Weijie Chen,
  • Chaohui Deng,
  • Runjian Deng and ,
  • Mingqing Xiao and
  • Dong Su
  • + 1 author+ 0 author

22 January 2025

During the excavation process of a Tunnel Boring Machine (TBM), the cutterhead exerts significant torque on the tunnel structure, which potentially causes torsional shear deformation at segment ring joints. Thus, examining the characteristics of tors...

(This article belongs to the Special Issue Advances in Tunnel and Underground Engineering)
  • Article
  • Open Access
428 Views
18 Pages

The shear behavior of corrugated steel web (CSW) composite girders near intermediate supports differs fundamentally from that of conventional beam segments due to the rigid restraint of concrete cross-beams, yet current design codes incorrectly assum...

(This article belongs to the Special Issue Advances in Bridge Engineering: Structures, Monitoring, and AI Technologies)
  • Article
  • Open Access
9 Citations
3,206 Views
12 Pages

4 August 2022

Based on the twin bridge shear specimen, the cyclic shear experiments were performed on 1.2 mm thin plates of 316L metastable austenitic stainless steel with different strain amplitudes from 1 to 5% at ambient temperature. The fatigue behavior of 316...

(This article belongs to the Special Issue Fracture Mechanics and Fatigue Damage of Materials and Structures)
  • Article
  • Open Access
1 Citations
2,778 Views
17 Pages

1 September 2021

Bimodal grain structure leads to high strength and strain hardening effect of metallic materials. In this study, an effective approach called flow control extrusion (FCE) is proposed to achieve heterostructures of pure copper. Compared with conventio...

(This article belongs to the Special Issue Phase Transformation, Functional Properties, and Crystallography of Advanced Materials)
  • Article
  • Open Access
1,108 Views
20 Pages

Shear Instability Control of Hybrid Small-Scale Plates Embedded in a Polymer Matrix via Shape Memory Alloy Nanofibers

  • Mohammad Reza Farajpour,
  • Mohammad Danesh,
  • Mohammad Hossein Shokrani and
  • Ali Farajpour

27 February 2026

A refined mathematical framework is developed to investigate the ability of shape memory alloy (SMA) nanofibers to control the shear instability of a hybrid small-scale plate made of three layers containing nanofibers. The middle layer is reinforced...

(This article belongs to the Special Issue Advanced Functional Shape Memory Alloys and Their Applications)
  • Article
  • Open Access
2 Citations
2,005 Views
11 Pages

Combined Effect of In and Ce on Microstructure and Properties of Ag10CuZnSn Low-Silver Brazing Filler Metals

  • Jiachen Xu,
  • Yucan Fu,
  • Yan Yang,
  • Zhen Li and ,
  • Li Wang,
  • Songbai Xue and
  • Jie Wu
  • + 2 authors+ 0 author

20 August 2023

In this study, trace amounts of In and Ce elements were composite added into a Ag10CuZnSn low-silver brazing filler metal, and the effects of the composite alloying on the solidus and liquidus temperatures, the spreading performance, the microstructu...

(This article belongs to the Special Issue Physical Mechanism of Welding of Metallic Materials)
  • Article
  • Open Access
1,087 Views
15 Pages

Unveiling the Microstructure Evolution Mechanism of A356 Aluminum Alloy During Squeeze Casting Torsional Formation

  • Zhenhu Wang,
  • Biwu Zhu,
  • Heng Li,
  • Xiao Liu and ,
  • Guoqiang Chen,
  • Shengkai Xiong,
  • Wenhui Liu,
  • Ganlin Qin,
  • Congchang Xu and
  • Luoxing Li
  • + 5 authors+ 0 author

19 September 2025

In this study, a novel casting–forging hybrid forming technique, introducing torsional shear during squeeze casting, was investigated. This approach enhances the forming efficiency and refines the grain size. Using a finite element method coupl...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
976 Views
22 Pages

Experimental Study on the Flexural Behavior of Steel–Concrete Composite Bridge Decks with Stud–PBL Shear Connectors

  • Ruifeng Dou,
  • Jun Zhao,
  • Longhua Shi,
  • Dongjie Weng and ,
  • Ding Zhou and
  • Wei Zhao
  • + 1 author+ 0 author

25 December 2025

To investigate the flexural behavior of steel–concrete composite bridge decks with stud–perfobond leist (PBL) shear connectors, two specimens were designed with the stud spacing as the main variable, and static bending tests were conducte...

(This article belongs to the Special Issue Research on Durability, Resilience and Stability of Building Structures)
  • Article
  • Open Access
1 Citations
1,415 Views
22 Pages

Numerical Simulation of In-Situ Direct Shear Test and Damage Failure Mechanism Study of Concrete-Bedrock Cementation Surface

  • Hexin Ye,
  • Jinlin Huang,
  • Jianwei Zhang,
  • Yu Lai and ,
  • Kelei Cao,
  • Yong Wang and
  • Wenxuan Wang
  • + 2 authors+ 0 author

10 June 2025

Owing to the insufficient understanding of the mechanical properties and damage mechanisms of concrete-rock bonding interfaces in dam foundations, this study establishes a refined three-dimensional simulation model for direct shear tests of concrete-...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
313 Views
15 Pages

12 September 2026

In this work, conventional friction stir lap welding (FSLW), self-riveting FSLW (R-FSLW) and ultrasonic-assisted R-FSLW (UR-FSLW) were employed to join dissimilar AA6061 and AZ31 alloys. The relatively thick Al-Mg intermetallic compound (IMC) layer p...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Dissimilar Metal Welding)
  • Article
  • Open Access
2 Citations
2,354 Views
18 Pages

New Insights into the Ingot Breakdown Mechanism of Near-β Titanium Alloy: An Orientation-Driven Perspective

  • Xianghong Liu,
  • Tao Wang,
  • Xiaolong Ren,
  • Jie Fu and ,
  • Liang Cheng,
  • Bin Zhu and
  • Kaixuan Wang
  • + 2 authors+ 0 author

7 July 2024

The ingot breakdown behavior of a typical near-β titanium alloy, Ti-55511, was investigated by various multi-pass upsetting processes. Particular emphasis was placed on the breakdown mechanism of the ultra-large β grains. The results showed...

(This article belongs to the Special Issue Casting Process, Processing Deformation and Microstructure Optimization of Advanced Metallic Materials)
  • Review
  • Open Access
15 Citations
4,665 Views
19 Pages

24 April 2024

This paper presents a comprehensive study on ultra-high-performance concrete (UHPC) beams without stirrups, where the test data of 487 beams were collected, and an experimental database was established. Four distinct shear strength calculation models...

(This article belongs to the Section Building Structures)

of 10