Skip to Content

180 Results Found

  • Article
  • Open Access
23 Citations
4,082 Views
18 Pages

Melt Memory Effects in Poly(butylene succinate) Studied by Differential Fast Scanning Calorimetry

  • Leire Sangroniz,
  • Connie Ocando,
  • Dario Cavallo and
  • Alejandro J. Müller

26 November 2020

It is widely accepted that melt memory effect on polymer crystallization depends on thermal history of the material, however a systematic study of the different parameters involved in the process has been neglected, so far. In this work, poly(butylen...

(This article belongs to the Special Issue Recent Developments on Calorimetry and Thermal Analysis of Polymers and Nanocomposites)
  • Article
  • Open Access
9 Citations
3,732 Views
17 Pages

29 July 2022

Degradation in the mechanical properties of recycled polymer materials has been recently appearing as a big issue in polymer science. The molecular mechanism of the degradation is considered in part due to residual memories of flow experienced during...

(This article belongs to the Special Issue Advanced Recycling of Plastic Waste: An Approach for Circular Economy)
  • Article
  • Open Access
12 Citations
4,007 Views
10 Pages

18 November 2021

A shape memory polymer was prepared by melt mixing a semicrystalline maleated polyolefin elastomer (mPOE) with a small amount of polyaniline (PANI) (up to 15 wt.%) in an internal mixer. Transmission electron microscopy (TEM), FTIR analysis, DMA, DSC,...

(This article belongs to the Special Issue Smart Composites and Processing)
  • Article
  • Open Access
6 Citations
3,222 Views
10 Pages

Inhomogeneity and Anisotropy in Nanostructured Melt-Spun Ti2NiCu Shape-Memory Ribbons

  • Pranav Bhale,
  • Pnina Ari-Gur,
  • Victor Koledov and
  • Alexander Shelyakov

16 October 2020

Ti2NiCu exhibits outstanding properties, such as superelasticity. Recently, its functional properties were also demonstrated on the nanoscale, a fact that makes it the preferred choice for numerous applications. Its properties strongly depend on the...

(This article belongs to the Section Smart and Functional Materials)
  • Abstract
  • Open Access
1 Citations
2,004 Views
3 Pages

Shape Memory Polymer Microstructures Using Melt Electrowriting

  • Biranche Tandon,
  • Nasim Sabahi,
  • Reza Farsi,
  • Taavet Kangur and ,
  • Xiaopeng Li and
  • Jürgen Brugger
  • + 1 author+ 0 author

Melt electrowriting is a relatively new additive manufacturing technique capable of the controlled deposition of polymeric fibers to manufacture pre-programmed structures at micron scale. In this research, a blend of poly (ε-caprolactone) and...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Review
  • Open Access
158 Citations
12,538 Views
12 Pages

A Review of Selective Laser Melted NiTi Shape Memory Alloy

  • Zhong Xun Khoo,
  • Yong Liu,
  • Jia An,
  • Chee Kai Chua and ,
  • Yu Fang Shen and
  • Che Nan Kuo
  • + 1 author+ 0 author

29 March 2018

NiTi shape memory alloys (SMAs) have the best combination of properties among the different SMAs. However, the limitations of conventional manufacturing processes and the poor manufacturability of NiTi have critically limited its full potential appli...

(This article belongs to the Special Issue NextGen Materials for 3D Printing)
  • Article
  • Open Access
2 Citations
1,734 Views
17 Pages

25 July 2025

A Cu-11.85Al-3.2Mn-0.1Ti shape memory alloy (SMA) with excellent superelasticity and shape memory effect was successfully fabricated via selective laser melting (SLM). Increasing the energy density enhanced grain refinement, achieving a 90% refinemen...

  • Article
  • Open Access
6 Citations
5,176 Views
19 Pages

13 January 2023

Low-melting-point alloy (LMPA) was used as an additive to prepare epoxy-resin-based shape memory polymer composites (LMPA/EP SMP), and dynamic mechanical analyzer (DMA) tests were performed to demonstrate the shape memory effect, storage modulus, and...

(This article belongs to the Topic Advanced Polymeric Composites: Processing, Characterization and Mechanical Behavior)
  • Feature Paper
  • Review
  • Open Access
154 Citations
10,101 Views
14 Pages

11 September 2018

Due to unique functional and mechanical properties, NiTi shape memory alloys are one of the most promising metallic functional materials. However, the poor workability limits the extensive utilization of NiTi alloys as components of complex shapes. T...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
3 Citations
1,334 Views
17 Pages

17 April 2025

Extended-chain crystals (ECCs) of poly(butylene succinate) (PBS), featuring highly ordered molecular chains and exceptional thermal stability with a melting point 25 °C higher than conventional folded-chain crystals, demonstrate remarkable potent...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
3 Citations
1,897 Views
13 Pages

Microstructure and Magnetic Properties of Fe67.6-Pd32-In0.4 (at.%) Shape Memory Melt-Spun Ribbons

  • David Vokoun,
  • Yuan-Hung Lo,
  • Oleg Heczko,
  • Sneha Samal and
  • Chen-Ti Hu

5 April 2024

Fe-~30 at.%Pd is a ferromagnetic shape memory alloy (SMA) with a reversible thermoelastic fcc-fct phase transformation. The advantage of adding a small amount of Indium to Fe-Pd SMAs is, among other things, the upward shift of the transformation temp...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,280 Views
15 Pages

5 November 2023

Cu–Sn shape-memory microw ires were fabricated by a glass-coated melt spinning method. Effects of Sn content on the microstructure and mechanical properties of microwires were investigated. The phase transforms from martensite to austenite with...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Feature Paper
  • Article
  • Open Access
8 Citations
6,542 Views
18 Pages

31 August 2021

Quaternary Ni-Ti-Cu-Pd formulations were cast by vacuum induction melting (VIM) with the aim of preparing low-hysteresis shape memory alloys and verifying the applicability of the Co-Factor theory in conventional industrial manufacturing processes. T...

(This article belongs to the Section Metallic Functional Materials)
  • Article
  • Open Access
5 Citations
3,210 Views
11 Pages

30 March 2023

Homo-polymers of reasonable molecular weight relax very fast in the molten state. Starting from a semi-crystalline structure, when the homo-polymer is heated up to a temperature higher than its nominal melting temperature, it relaxes quickly into a h...

(This article belongs to the Special Issue State of the Art and Perspectives of Polymer Science and Technology in China)
  • Article
  • Open Access
11 Citations
3,822 Views
9 Pages

Influence of Spinning Method on Shape Memory Effect of Thermoplastic Polyurethane Yarns

  • Lukas Benecke,
  • Robert Tonndorf,
  • Chokri Cherif and
  • Dilbar Aibibu

3 January 2023

Shape memory polymers are gaining increasing attention, especially in the medical field, due to their ability to recover high deformations, low activation temperatures, and relatively high actuation stress. Furthermore, shape memory polymers can be a...

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
31 Citations
7,908 Views
15 Pages

Design of Ethylene-Vinyl Acetate Copolymer Fiber with Two-Way Shape Memory Effect

  • Xiaoming Qi,
  • Wentong Yang,
  • Laiming Yu,
  • Wenjun Wang and ,
  • Haohao Lu,
  • Yanglong Wu,
  • Shanwen Zhu,
  • Yaofeng Zhu,
  • Xiangdong Liu and
  • Yaqin Fu
  • + 6 authors+ 1 author

30 September 2019

One-dimensional shape memory polymer fibers (SMPFs) have obvious advantages in mechanical properties, dispersion properties, and weavability. In this work, a method for fabricating semi-crystallization ethylene-vinyl acetate copolymer (EVA) fiber wit...

  • Article
  • Open Access
21 Citations
5,311 Views
17 Pages

Laser-Assisted Synthesis of Cu-Al-Ni Shape Memory Alloys: Effect of Inert Gas Pressure and Ni Content

  • Stefan Niedbalski,
  • Alicia Durán,
  • Magdalena Walczak and
  • Jorge A. Ramos-Grez

7 March 2019

The paper explores the applicability of laser-assisted synthesis for producing high density Cu-Al-Ni alloys with shape memory characteristics, that could be further developed towards a method of additive manufacturing of large size Cu-based shape mem...

(This article belongs to the Special Issue Laser Materials Fabrication and Joining)
  • Article
  • Open Access
5 Citations
6,192 Views
9 Pages

Shape Memory and Huge Superelasticity in Ni–Mn–Ga Glass-Coated Fibers

  • Lei Shao,
  • Yangyong Zhao,
  • Alejandro Jiménez,
  • Manuel Vázquez and
  • Yong Zhang

Ni–Mn–Ga polycrystalline alloy fibers with diameters of 33 μm are reported to exhibit significantly improved ductility and huge superelastic and shape memory strains in comparison to conventional brittle bulk polycrystalline alloys. Particularly, the...

  • Article
  • Open Access
9 Citations
6,283 Views
15 Pages

10 August 2017

The presented paper concerns scientific research on processing a poly(lactide-co-glycolide-co-trimethylene carbonate) copolymer (PLLAGLTMC) with thermally induced shape memory and a transition temperature around human body temperature. The material i...

(This article belongs to the Special Issue Biomedical Applications of Polylactide (PLA) and its Copolymers)
  • Article
  • Open Access
2 Citations
3,008 Views
15 Pages

Fusion of Ni Plating on CP-Titanium by Electron Beam Single-Track Scanning: Toward a New Approach for Fabricating TiNi Self-Healing Shape Memory Coating

  • Lei Wang,
  • Masayuki Okugawa,
  • Hirokazu Konishi,
  • Yuheng Liu and ,
  • Yuichiro Koizumi and
  • Takayoshi Nakano
  • + 1 author+ 0 author

3 August 2023

The limited wear resistance of commercially pure titanium (CP-Ti) hinders its use in abrasive and erosive environments, despite its good strength–weight ratio and corrosion resistance. This paper reports the first study proposing a novel method...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
5 Citations
3,014 Views
14 Pages

Kinetics and the Effect of Thermal Treatments on the Martensitic Transformation and Magnetic Properties in Ni49Mn32Ga19 Ferromagnetic Shape Memory Ribbons

  • Felicia Tolea,
  • Bogdan Popescu,
  • Cristina Bartha,
  • Monica Enculescu and ,
  • Mugurel Tolea and
  • Mihaela Sofronie
  • + 1 author+ 0 author

In our work, the kinetics of martensitic transformations and the influence of thermal treatments on martensitic transformations, as well as the related magnetic properties of the Ni49Mn32Ga19 ferromagnetic shape memory melt-spun ribbons, have been in...

(This article belongs to the Special Issue Phase Change Material and Magnetic Research)
  • Article
  • Open Access
755 Views
21 Pages

Crystallization-Programmed Isotactic Polystyrene Towards Membrane Architecture: Quantitative Optical–Thermal Kinetics

  • Al Mamun,
  • Maha Alruwaili,
  • Abdullah Al–Mamun,
  • Md. Shafiquzzaman and ,
  • Gary S. Coombs,
  • Aljawad Mohammed Alolaywi and
  • Amira Salman Alazmi
  • + 2 authors+ 0 author

7 July 2026

Crystallization can be exploited as an architecture-forming step for polymer membranes because it builds a load-bearing semicrystalline scaffold while simultaneously defining amorphous regions that later become transport pathways. Herein, we quantify...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
25 Citations
4,563 Views
23 Pages

Expandable Drug Delivery Systems Based on Shape Memory Polymers: Impact of Film Coating on Mechanical Properties and Release and Recovery Performance

  • Marco Uboldi,
  • Chiara Pasini,
  • Stefano Pandini,
  • Francesco Baldi and ,
  • Francesco Briatico-Vangosa,
  • Nicoletta Inverardi,
  • Alessandra Maroni,
  • Saliha Moutaharrik,
  • Alice Melocchi and
  • Lucia Zema
  • + 6 authors+ 1 author

Retentive drug delivery systems (DDSs) are intended for prolonged residence and release inside hollow muscular organs, to achieve either local or systemic therapeutic goals. Recently, formulations based on shape memory polymers (SMPs) have gained att...

(This article belongs to the Section Drug Delivery and Controlled Release)
  • Article
  • Open Access
59 Citations
8,581 Views
19 Pages

Effect of Heat Treatment on Repetitively Scanned SLM NiTi Shape Memory Alloy

  • Zhong Xun Khoo,
  • Jia An,
  • Chee Kai Chua,
  • Yu Fang Shen and ,
  • Che Nan Kuo and
  • Yong Liu
  • + 1 author+ 0 author

26 December 2018

Selective Laser Melting (SLM) has been implemented to address the difficulties in manufacturing complex nickel titanium (NiTi) structures. However, the SLM production of NiTi is much more challenging than the fabrication of conventional metals. Other...

(This article belongs to the Section Smart and Functional Materials)
  • Review
  • Open Access
70 Citations
8,235 Views
14 Pages

Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys

  • Shifeng Wen,
  • Jie Gan,
  • Fei Li,
  • Yan Zhou and ,
  • Chunze Yan and
  • Yusheng Shi
  • + 1 author+ 0 author

11 August 2021

Nickel-titanium alloys have been widely used in biomedical, aerospace and other fields due to their shape memory effect, superelastic effect, as well as biocompatible and elasto-thermal properties. Additive manufacturing (AM) technology can form comp...

(This article belongs to the Special Issue Material Design and Defect Control for Metal Additive Manufacturing)
  • Article
  • Open Access
63 Citations
7,551 Views
11 Pages

11 May 2018

In this study, an optimal selective laser melting (SLM) process for manufacturing dense NiTi alloy with pseudoelasticity and shape-memory capability was proposed. The microstructure, phase-transformation temperature, shape memory capability, and pseu...

(This article belongs to the Special Issue Machining and Finishing of Nickel and Titanium Alloys)
  • Article
  • Open Access
420 Views
30 Pages

28 September 2026

Thermally activated four-dimensional printing allows additively manufactured structures to change shape with temperature, providing potential for adaptive polymeric systems. In soft thermoplastic polyurethane (TPU) composites, this is hindered by ina...

(This article belongs to the Special Issue Novel Applications of Additive Manufacturing Technology for Functional Materials and Composite Materials)
  • Article
  • Open Access
9 Citations
3,296 Views
12 Pages

8 December 2021

A large spherulite structure deteriorates the mechanical properties of crystalline polymers, and therefore various methods have been explored to increase primary nucleation density. Recently, chain-end modification has been proposed as an effective a...

(This article belongs to the Topic Polymer Crystallization)
  • Article
  • Open Access
17 Citations
2,015 Views
12 Pages

Effect of Energy Density on Mechanical Properties of NiTiCu Shape Memory Alloys Prepared by SLM

  • Yi Ba,
  • Yan Lv,
  • Miaoning Yan,
  • Hongxu Jin and ,
  • Liang Guo and
  • Qingmao Zhang
  • + 1 author+ 0 author

21 November 2024

In the Ni-Ti shape memory alloy system, Cu elements are used to replace Ni elements. A NiTiCu alloy with a molar ratio of 45:50:5 was prepared using laser selective melting technology. The density, composition, microstructure, and mechanical properti...

(This article belongs to the Special Issue 3D Printing Technology with Metal Materials)
  • Article
  • Open Access
725 Views
20 Pages

Melt-spun Fe70−xPd30Gax ribbons (x = 1 and 3 at.% Ga) were heat-treated at 1223 K for 1 h and 2 h and characterized by X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, magnetometry, and magnetoelastic measurem...

(This article belongs to the Special Issue 10th Anniversary of Magnetochemistry: Past, Present and Future)
  • Article
  • Open Access
74 Citations
8,433 Views
12 Pages

Multi-Material 3D Printed Shape Memory Polymer with Tunable Melting and Glass Transition Temperature Activated by Heat or Light

  • Ela Sachyani Keneth,
  • Rama Lieberman,
  • Matthew Rednor,
  • Giulia Scalet and ,
  • Ferdinando Auricchio and
  • Shlomo Magdassi
  • + 1 author+ 0 author

23 March 2020

Shape memory polymers are attractive smart materials that have many practical applications and academic interest. Three-dimensional (3D) printable shape memory polymers are of great importance for the fabrication of soft robotic devices due to their...

  • Review
  • Open Access
104 Citations
18,458 Views
20 Pages

Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production

  • Josiah Cherian Chekotu,
  • Robert Groarke,
  • Kevin O’Toole and
  • Dermot Brabazon

8 March 2019

Nitinol (nickel-titanium or Ni-Ti) is the most utilized shape memory alloy due to its good superelasticity, shape memory effect, low stiffness, damping, biocompatibility, and corrosion resistance. Various material characteristics, such as sensitivity...

(This article belongs to the Special Issue Advanced Technology for Materials Synthesis and Processing)
  • Article
  • Open Access
7 Citations
3,222 Views
13 Pages

24 August 2022

Shape-memory alloy (SMA) honeycomb arrays have drawn worldwide attention for their potential active applications in smart morphing wings. However, the manufacturing of complex active SMA honeycomb arrays via conventional processes is a difficult task...

(This article belongs to the Special Issue Shape Memory Alloys and Piezoelectric Materials and Their Applications)
  • Article
  • Open Access
28 Citations
4,942 Views
11 Pages

20 May 2021

This paper presents the results of selective laser melting (SLM) process of a nitinol-based NiTiNb shape memory alloy. The eutectic alloy Ni45Ti45Nb10 with a shape memory effect was obtained by SLM in-situ alloying using a powder mixture of NiTi and...

(This article belongs to the Special Issue Materials, Design and Process Development for Additive Manufacturing)
  • Feature Paper
  • Article
  • Open Access
20 Citations
8,604 Views
14 Pages

Shape-Memory Nanofiber Meshes with Programmable Cell Orientation

  • Eri Niiyama,
  • Kanta Tanabe,
  • Koichiro Uto,
  • Akihiko Kikuchi and
  • Mitsuhiro Ebara

1 March 2019

In this work we report the rational design of temperature-responsive nanofiber meshes with shape-memory properties. Meshes were fabricated by electrospinning poly(ε-caprolactone) (PCL)-based polyurethane with varying ratios of soft (PCL diol)...

(This article belongs to the Special Issue Electrospun Polymer Nanofibers for Food and Health Applications)
  • Article
  • Open Access
13 Citations
3,955 Views
11 Pages

18 March 2022

In this study, we analyzed the coupling effect of laser scanning speed and wall thickness on the phase transformation behavior and tensile properties of selective laser melted NiTi thin-wall structures. It is demonstrated that either scanning speed o...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Article
  • Open Access
19 Citations
3,399 Views
9 Pages

Dataset on a Small-Scale Film-Coating Process Developed for Self-Expanding 4D Printed Drug Delivery Devices

  • Marco Uboldi,
  • Alice Melocchi,
  • Saliha Moutaharrik,
  • Matteo Cerea and ,
  • Andrea Gazzaniga and
  • Lucia Zema
  • + 1 author+ 0 author

14 October 2021

Film-coating is widely applied in pharmaceutics to enhance aspect/taste and mechanical properties of dosage forms, to protect them from the environment and to modify their release performance. In this respect, a film-coating process was recently invo...

  • Feature Paper
  • Article
  • Open Access
28 Citations
4,295 Views
19 Pages

Design of Shape Memory Thermoplastic Material Systems for FDM-Type Additive Manufacturing

  • Paulina A. Quiñonez,
  • Leticia Ugarte-Sanchez,
  • Diego Bermudez,
  • Paulina Chinolla and ,
  • Rhyan Dueck,
  • Truman J. Cavender-Word and
  • David A. Roberson
  • + 2 authors+ 0 author

30 July 2021

The work presented here describes a paradigm for the design of materials for additive manufacturing platforms based on taking advantage of unique physical properties imparted upon the material by the fabrication process. We sought to further investig...

(This article belongs to the Special Issue New Materials and Approaches in Polymer Additive Manufacturing)
  • Article
  • Open Access
62 Citations
5,574 Views
9 Pages

18 June 2020

Nowadays, additive manufacturing (AM) permits to realize complex metallic structural parts, and the use of NiTi alloy, known as Nitinol, allows the integration of specific functions to the AM products. One of the most promising designs for AM is conc...

(This article belongs to the Special Issue Shape Memory Alloys 2020)
  • Article
  • Open Access
8 Citations
4,262 Views
14 Pages

Microstructure and Mechanical Properties of Cu-11Al-5Ni-4Fe wt% Manufactured by LPBF

  • Carolina Guerra,
  • Jorge A. Ramos-Grez,
  • Iván La Fé-Perdomo,
  • Alejandro Castillo and
  • Magdalena Walczak

22 February 2023

Cu-11Al-5Ni-4Fe wt% alloy is processed by additive manufacturing using the laser powder bed fusion (LPBF) technique in two building orientations (90° and 0° to the building platform) to determine which laser parameters are more critical to ob...

(This article belongs to the Special Issue Additive Manufacturing of Non-ferrous Alloys)
  • Article
  • Open Access
7 Citations
2,636 Views
11 Pages

Anticoagulant Properties of Coated Fe-Pd Ferromagnetic Shape Memory Ribbons

  • Alexander Bunge,
  • Alexandru Chiriac,
  • Mihaela Sofronie,
  • Izabell Crăciunescu and ,
  • Alin Sebastian Porav and
  • Rodica Turcu
  • + 1 author+ 0 author

26 January 2023

Shape memory alloys, especially ferromagnetic shape memory alloys, are interesting new materials for the manufacturing of stents. Iron–palladium alloys in particular can be used to manufacture self-expanding temporary stents due to their optimu...

(This article belongs to the Special Issue Regenerative Medicine: Role of Stem Cells and Innovative Biomaterials 3.0)
  • Article
  • Open Access
1,549 Views
14 Pages

Microstructural Evolution and Precipitate Control in Boron-Doped Ni-Mn-Ti Shape Memory Alloys via Thermal Processing

  • Na Liu,
  • Marcia Ahn,
  • Subrata Ghosh,
  • Dipika Mandal and ,
  • Bed Poudel and
  • Wenjie Li
  • + 1 author+ 0 author

20 March 2026

Elastocaloric cooling, which leverages stress-induced phase transformation in shape memory materials, represents a sustainable and energy-efficient alternative to conventional vapor-compression cooling systems. Central to optimizing these materials i...

(This article belongs to the Special Issue Applications of Crystalline Materials in Elastocaloric Devices)
  • Feature Paper
  • Article
  • Open Access
7 Citations
4,310 Views
13 Pages

Fractionation of Lignin for Selective Shape Memory Effects at Elevated Temperatures

  • Ngoc A. Nguyen,
  • Christopher C. Bowland,
  • Peter V. Bonnesen,
  • Kenneth C. Littrell and ,
  • Jong K. Keum and
  • Amit K. Naskar
  • + 1 author+ 0 author

20 April 2020

We report a facile approach to control the shape memory effects and thermomechanical characteristics of a lignin-based multiphase polymer. Solvent fractionation of a syringylpropane-rich technical organosolv lignin resulted in selective lignin struct...

(This article belongs to the Special Issue Programmable Anisotropic Materials and Composites)
  • Article
  • Open Access
21 Citations
3,889 Views
11 Pages

Microstructure and Magnetic Properties of Selected Laser Melted Ni-Mn-Ga and Ni-Mn-Ga-Fe Powders Derived from as Melt-Spun Ribbons Precursors

  • Wojciech Maziarz,
  • Paweł Czaja,
  • Robert Chulist,
  • Anna Wójcik and ,
  • Łukasz Żrodowski,
  • Bartosz Morończyk,
  • Rafał Wróblewski and
  • Maciej Kowalczyk
  • + 3 authors+ 0 author

31 May 2021

Selective Laser Melting was successfully used as a fabrication method to produce Ni-Mn-Ga and Ni-Mn-Ga-Fe ferromagnetic shape memory alloys. The starting material in a powder form with an average particle size of about 17.6 µm was produced by milling...

(This article belongs to the Special Issue AM-PBF Processes and Joining Similar/Dissimilar PBF Materials: Quo Vadis?)
  • Article
  • Open Access
44 Citations
16,215 Views
9 Pages

Thermal-Mechanical Properties of Polyurethane-Clay Shape Memory Polymer Nanocomposites

  • Bin Xu,
  • Yong Qing Fu,
  • Wei Min Huang,
  • Yu Tao Pei and ,
  • Zhen Guo Chen,
  • Jeff T.M. De Hosson,
  • Arno Kraft and
  • R. L. Reuben
  • + 3 authors+ 0 author

26 April 2010

Shape memory nanocomposites of polyurethane (PU)-clay were fabricated by melt mixing of PU and nano-clay. Based on nano-indentation and microhardness tests, the strength of the nanocomposites increased dramatically as a function of clay content, whic...

(This article belongs to the Special Issue Novel Stimuli-Responsive (co)Polymers)
  • Article
  • Open Access
13 Citations
3,172 Views
14 Pages

13 December 2022

Fibrous shape memory scaffolds composed of thermoplastic polyurethane based on a mixture of polycaprolactone diols were fabricated. The effect of the fiber diameter and arrangement– random (rPU) or aligned (aPU), on crystallinity, mechanical pr...

(This article belongs to the Special Issue Electrospinning Technology to Produce Innovative Nanostructured Polymer Materials: Current Applications and Future Perspectives)
  • Article
  • Open Access
19 Citations
3,990 Views
29 Pages

A Robust Recurrent Neural Networks-Based Surrogate Model for Thermal History and Melt Pool Characteristics in Directed Energy Deposition

  • Sung-Heng Wu,
  • Usman Tariq,
  • Ranjit Joy,
  • Muhammad Arif Mahmood and ,
  • Asad Waqar Malik and
  • Frank Liou
  • + 1 author+ 0 author

3 September 2024

In directed energy deposition (DED), accurately controlling and predicting melt pool characteristics is essential for ensuring desired material qualities and geometric accuracies. This paper introduces a robust surrogate model based on recurrent neur...

(This article belongs to the Special Issue Applications of Modeling and Machine Learning in Additive Manufacturing)
  • Article
  • Open Access
3 Citations
2,781 Views
12 Pages

RETRACTED: Investigation of the Ordered Structure in Partially Melted Isotactic Polypropylene

  • Junfang Shen,
  • Derong Zhu,
  • Junchao An,
  • Zhiyu Min and
  • Jingbo Chen

30 September 2021

The ordered structure of partially melted isotactic polypropylene (iPP) was investigated using polarized optical microscopy (POM) and small-/wide-angle X-ray scattering (SAXS/WAXS) measurements. The crystalline morphology was first examined by means...

  • Article
  • Open Access
30 Citations
8,849 Views
15 Pages

Polymeric Shape-Memory Micro-Patterned Surface for Switching Wettability with Temperature

  • Nuria García-Huete,
  • José María Cuevas,
  • José Manuel Laza,
  • José Luis Vilas and
  • Luis Manuel León

8 September 2015

An innovative method to switch the wettability of a micropatterned polymeric surface by thermally induced shape memory effect is presented. For this purpose, first polycyclooctene (PCO) is crosslinked with dycumil peroxide (DCP) and its melting tempe...

(This article belongs to the Special Issue Shape-Memory Polymers)
  • Article
  • Open Access
3 Citations
2,903 Views
18 Pages

Shape Memory Respirator Mask for Airborne Viruses

  • Kosisochi Ibebunjo,
  • Susanna Tella,
  • Samantha Kiljunen and
  • Eveliina Repo

13 April 2023

The emergence of COVID-19 has spurred demand for facemasks and prompted many studies aiming to develop masks that provide maximum protection. Filtration capacity and fit define the level of protection a mask can provide, and the fit is in large part...

(This article belongs to the Section Smart and Functional Polymers)

of 4