- Article
This article presents the results of a computational investigation of an integrated propeller test case using the HPCMP CREATE
This article presents the results of a computational investigation of an integrated propeller test case using the HPCMP CREATE
The performance of an entire ship is increasingly impacted by propellers, which are the essential components of a ship’s propulsion system that have growing significance in a variety of aspects. Consequently, it has been a hot research topic an...
During the service of solid rocket motors, propellant grains need to bear various loads such as curing cooling, gravity, and combustion internal pressure. The internal pore defects will seriously affect the structural integrity. In this paper, a thre...
To investigate the structural effects of the mechanical heterogeneity of Hydroxyl-terminated polybutadiene (HTPB) propellant grain under ignition pressurization, a gradient finite element method was proposed to evaluate its structural integrity. The...
In order to investigate the effect of tension–compression asymmetry of propellant mechanical properties on the structural integrity of a Nitrate Ester Plasticized Polyether (NEPE) propellant grain, the unified constitutive equations under tensi...
20 January 2023
Aeroacoustic noise in multiple rotor drones has been increasingly recognized as a crucial issue, while noise reduction is normally associated with a trade-off between aerodynamic performance and sound suppression as well as sound quality improvement....
To address the time-consuming and labor-intensive procedures associated with traditional approaches for evaluating the integrated burning rate of wire-embedded propellants in solid rocket motors (SRMs), this study proposes an efficient and reliable p...
This study investigates the gas safety hazards and blast-induced structural response associated with lithium-ion battery thermal runaway in a 40-passenger, 350 kW hydrogen-propelled vessel. Thermal-runaway experiments identified methane, carbon monox...
The aerodynamic characterization of propeller-driven UAVs is often constrained by the unfeasibility of testing the complete airframe–propeller assembly in a wind tunnel, since geometric scaling prevents simultaneous similarity of both the airfr...
This study investigates the design and potential failure modes of a marine propeller shaft using computational and analytical methods. The aim is to assess the structural integrity of the existing design and propose modifications for improved reliabi...
For the purpose of reducing the cost, size, and weight of the integrated navigation system of an AUV (autonomous underwater vehicle), and improving the stealth of this system, an integrated navigation algorithm based on a propeller tachometer is prop...
In a high-temperature test of the gas generator with a free-loading composite propellant, an abnormal jitter appeared in the latter part of the internal ballistic curve, whereas no such abnormality was observed in the low-temperature and normal-tempe...
Autonomous Underwater Vehicles (AUVs) are widely employed for deep sea exploration and underwater operations, but their navigation performance is often degraded in complex environments due to time-varying measurement noise, abnormal observations, and...
Over twenty Solar-Powered Unmanned Aerial Vehicle (SPUAV) designs exist worldwide, yet few have successfully achieved uninterrupted high-altitude flight. This shortfall is attributed to several factors that cause the actual performance of SPUAV to fa...
Electric pump-fed liquid rocket engines require coordinated propellant delivery under coupled hydraulic, electrical, actuator, and thermal constraints. This study develops an integrated reduced-order model of a dual-channel electric pump-fed propella...
The purpose of ship optimization is to reduce the resistance of the ship and improve the propulsive efficiency of the propeller. Taking the design of the hull, propeller and rudder as an example, the integration optimization of ship speed performance...
In order to enhance the wind-resistance capability and achieve a lightweight design of high-altitude unmanned airships, this study proposes a rapid optimization method for a heterogeneous propeller propulsion system. This system integrates contra-rot...
The objective of this paper was to establish a comprehensive methodology for the optimized design of propellers for ice-class vessels, aiming to enhance hydrodynamic efficiency while ensuring structural integrity. This paper begins by introducing a n...
Channel wing is a propeller-coupling layout that has good low-speed performance and S/VTOL potential. Focused on the application of this layout at the S/VTOL stage, this paper attempts to find the interaction mechanism for the distributed propeller c...
Accounting for propeller–wing interaction allows for the design of more efficient propeller aircraft through strategic propulsion integration. In this paper, the cruise drag of a wing with a propeller located in front of the wingtip is minimize...
Stern-first operation under severe ice conditions (ridges) is one of the most effective modes to increase the operating efficiency of icebreakers and ice ships. However, when a ship overcomes the ridge astern, the propellers continuously interact wit...
Small coastal crafts are often equipped with stock propellers selected from limited commercial options, without detailed matching among the hull, main engine, reduction gear, and propeller. This study presents a practical and integrated procedure for...
High-speed compound helicopters surpass the forward-speed limits of conventional helicopters and expand the flight envelope, yet close multi-component integration induces complex aerodynamic interference, whose underlying mechanisms and evolution wit...
High-efficiency propeller design is essential for reducing the total mass of near-space airships under low-Reynolds-number conditions. This study optimizes the overall design parameters of near-space airships by integrating an efficient engineering p...
The rising interest in the evolvability of electric vertical takeoff and landing (eVTOL) promises substantial potential in the field of urban air mobility (UAM). Challenges in energy storage density and geometry restriction both emphasize the propell...
This study presents a practical optimization procedure that couples the NavCad power prediction tool and a nonlinear optimizer integrated into the Matlab environment. This developed model aims at selecting a propeller at the engine operating point wi...
Ship propulsion performance is important for navigating. This study aims to enhance the propulsion performance of a 9500 DWT ship by integrating PBCFs into the hull–rudder–propeller–coupled system. A total of 27 PBCF models with dif...
With the rapid industrialization utilizing multi-rotor drones in recent years, an increase in urban flights is expected in the near future. This may potentially result in noise pollution due to the operation of drones. This study investigates the nea...
To better understand the influence of swirl on the thermally-stratified near wake of a self-propelled axisymmetric vehicle, three propulsor schemes were considered: a single propeller, contra-rotating propellers (CRP), and a zero-swirl, uniform-veloc...
As a typical viscoelastic material, solid propellants have a large difference in mechanical properties under static and dynamic loading. This variability is manifested in the difference in values of the relaxation modulus and dynamic modulus, which s...
This paper presents a methodology for optimizing an aeronautical propeller to minimize power consumption. A multi-objective approach using blade element momentum (BEM) theory and evolutionary algorithms is employed to optimize propeller design by min...
This study investigates the aerodynamic and aeroacoustic performance of a novel two-stage two-bladed coaxial propeller that is axially and angularly spaced. Aerodynamic propulsive thrust and efficiency are validated and evaluated using a Reynolds-ave...
This paper presents a numerical investigation of noise radiated by two side-by-side propellers, suitable for Distributed-Electric-Propulsion concepts. The focus is on the assessment of the variation of the effects of blade tip Mach number on the radi...
The dynamic mechanical behaviors of Hydroxyl-terminated polybutadiene (HTPB) propellant was studied by a split Hopkinson pressure bar apparatus (SHPB) at strain rates ranging from 103 to 104 s−1. The obtained stress–strain curves indicate...
This paper presents an investigation of the aerodynamic and aeroacoustic interaction of propellers for distributed electric propulsion applications. The rationale underlying the research is related to the key role that aeroacoustics plays in the esta...
The transmissive mode laser micro-ablation performance of near-infrared (NIR) dye-optimized ammonium dinitramide (ADN)-based liquid propellant was investigated in laser plasma propulsion using a pulse YAG laser with 5 ns pulse width and 1064 nm wavel...
In this paper, a multidisciplinary optimization design method and its verification of low-noise aircraft propellers considering aerodynamics, noise, and structural strength were carried out to further reduce the aerodynamic noise of the aircraft prop...
The growing importance of sustainable technologies and environmental safety is promoting the implementation of green chemistry principles in the field of energetic materials. Traditionally, nitrocellulose-based propellants are plasticized with dibuty...
The azido propellant, with high energy and low signature, has been a hotpot in the field of propellants. However, the risk of low heat resistance and mechanical performance restricts their range of applications in high-energy formulations. In this st...
The rising use of UAVs in various applications has underscored the critical challenge of noise pollution and aerodynamic efficiency. This study explores the dual integration of winglets and serrations on UAV propellers to address these challenges sim...
Hydrodynamic Energy-Saving Devices (ESDs) have become effective solutions to improve vessel operational efficiency in maritime applications. A novel toroidal boosted appendage which is installed behind the KP505 propeller, featuring an integrated sel...
This study develops a ship propeller diagnostic system to address the issue of insufficient ship maintenance capacity and enhance operational efficiency. It uses the Remaining Useful Life (RUL) prediction technology to establish a sensing platform fo...
The electric propulsion system is a critical determinant of unmanned aerial vehicles’ (UAVs’) operational capabilities, particularly endurance performance. This paper proposes a high-precision modeling framework for UAV electric propulsio...
The toroidal propeller, as a high-performance propulsor with a unique geometric configuration, presents challenges in parameterizing its complex geometry and conducting design optimization. This paper proposes a hybrid Free-Form Deformation (FFD) bas...
Multi-rotor ducted propellers, which integrate the high-efficiency characteristics of ducted propellers with the layout flexibility and safety advantages of distributed propulsion, are extensively utilized in the propulsion systems of low-altitude tr...
The present study evaluates the viability of fabricating unmanned aerial vehicle (UAV) propellers using fused filament fabrication (FFF), with an emphasis on low-cost, desktop-scale production. The study’s backdrop is the recent adoption of UAV...
The Kuroshio Current’s flow velocity imposes exacting requirements on underwater vehicle propulsive systems. Ecological preservation necessitates low-noise propeller designs to mitigate operational disturbances. As technological evolution advan...
Recent developments in electrical Vertical Take-off and Landing (eVTOL) vehicles show the need for a better understanding of transient aero-mechanical propeller loads for non-axial inflow conditions. The variety of vehicle configurations conceptualiz...
This article presents a method for the optimal design of actuators for electric vessels that utilize DC motors. Typically, these vessels are small, unmanned craft that can be Unmanned Surface Vessels (USVs) or Unmanned Underwater Vessels (UUVs). The...
With the increasing demand for high-performance leisure boat propellers, this study explores the development of high-strength aluminum alloy propellers using the low-pressure die-casting (LPDC) process. In Part I of the study, we identified the optim...
of 13