Skip to Content

149 Results Found

  • Article
  • Open Access
15 Citations
2,732 Views
20 Pages

13 March 2024

A flexure hinge composed of elliptical and hyperbolic hybrid configurations is developed and analyzed in this paper. The analytical models of compliance, rotation accuracy, and maximum stress of the flexure hinge are established, and the correctness...

(This article belongs to the Special Issue Advanced Materials, Structures, Symmetrical Design and Mechanism in Mechanical Engineering)
  • Article
  • Open Access
24 Citations
8,628 Views
20 Pages

19 September 2017

As a kind of important flexible joint, two-axis flexure hinges can realize in-plane and out-of-plane motions and can be used for constructing flexure-based spatial compliant mechanisms. The paper introduces a common two-axis elliptical-arc-filleted f...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
3,021 Views
15 Pages

24 June 2022

Traditional flexure hinges are designed by using a single material, and their performance is inadequate, compared to the ideal hinge. This paper presents a topology-optimization design method for multi-material flexure hinges based on the element sta...

  • Article
  • Open Access
2 Citations
2,878 Views
24 Pages

29 August 2023

Flexure hinges are widely used in mechanical devices, especially for micro- or even nano-scale applications, where conventional joints based on conjugate surfaces prove unsuitable. However, to achieve accurate motion of devices whose joints are flexu...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
4,049 Views
17 Pages

Theoretical Stiffness Modeling and Application Research of a Novel Stacked Flexure Hinge

  • Yonghong Zhang,
  • Chengmin Wang,
  • Shuangquan Tang,
  • You Jiang and ,
  • Hong Chen and
  • Wenjie Ge
  • + 1 author+ 0 author

This study investigates and designs a novel stacked hinge with low stiffness, large rotation angle, high strength, and length-adaptive functionality. Firstly, based on the large deformation theory of cantilever beams and relevant theories of leaf spr...

  • Article
  • Open Access
5 Citations
4,243 Views
16 Pages

Analytical Modeling and Application for Semi-Circular Notch Flexure Hinges

  • Qiaoling Meng,
  • Zhongzhe Chen,
  • Haolun Kang,
  • Zhijia Shen and
  • Hongliu Yu

15 August 2023

Flexure-based compliant mechanisms can be used to achieve bio-imitability and adaptability in the applications of biomedical engineering. However, a nonlinear load-displacement profile increases the design complexity of this type of compliant mechani...

  • Article
  • Open Access
6 Citations
4,573 Views
12 Pages

Design and Performance Analysis of a Micro-Displacement Worktable Based on Flexure Hinges

  • Lan Yan,
  • Anna Jiang,
  • Feng Jiang,
  • Guangda Liu and ,
  • Fuzeng Wang and
  • Xian Wu
  • + 1 author+ 0 author

26 March 2022

The flexure hinge is a kind of micro-displacement adjustment device with application prospects because of its high displacement resolution, positioning accuracy and repeatability. In this study, a micro-displacement worktable with four degrees of fre...

  • Article
  • Open Access
20 Citations
11,340 Views
16 Pages

On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications

  • Mario André Torres Melgarejo,
  • Maximilian Darnieder,
  • Sebastian Linß,
  • Lena Zentner and ,
  • Thomas Fröhlich and
  • René Theska
  • + 1 author+ 0 author

6 December 2018

Compliant mechanisms based on flexure hinges are widely used in precision engineering applications. Among those are devices such as precision balances and mass comparators with achievable resolutions and uncertainties in the nano-newton range. The ex...

  • Article
  • Open Access
44 Citations
9,056 Views
14 Pages

9 August 2017

A compact 2-DOF (two degrees of freedom) piezoelectric-driven platform for 3D cellular bio-assembly systems has been proposed based on “Z-shaped” flexure hinges. Multiple linear motions with high resolution both in x and y directions are achieved. Th...

  • Article
  • Open Access
11 Citations
7,181 Views
17 Pages

24 December 2021

This paper presents a design of a 3DOF XYZ bi-directional motion platform based on Z-shaped flexure hinges. In the presented platform, bridge-type mechanisms and Z-shaped flexure hinges are adopted to amplify its output displacement. Bi-direction mot...

(This article belongs to the Special Issue Robotic Micromanipulation, Volume II)
  • Article
  • Open Access
10 Citations
3,186 Views
16 Pages

9 October 2021

Elliptical vibration-assisted cutting technology has been widely applied in complicated functional micro-structured surface texturing. Elliptical-arc-beam spherical flexure hinges have promising applications in the design of 3D elliptical vibration-a...

(This article belongs to the Special Issue Ultra-Precision Manufacturing Technology for Difficult-to-Machine Materials)
  • Article
  • Open Access
3 Citations
4,554 Views
22 Pages

5 January 2024

Micro-newton thrust stands are widely used in thruster ground calibration procedures for a variety of space missions. The conventional analytical model does not consider the gravity-induced extension effect and systematic error in displacement for th...

(This article belongs to the Special Issue Recent Developments in Precision Actuation Technologies)
  • Article
  • Open Access
9,210 Views
15 Pages

The Taguchi method is widely used for the optimization of mechanical design and this study is used it in the design of a 2D circular flexure hinge for a z-tilt piezoelectric based nano-scale compensation stage. Maximum displacement of the stage is 16...

(This article belongs to the Special Issue Innovation and Inventions of Electro-Optical Materials and Devices and their Application)
  • Article
  • Open Access
12 Citations
5,015 Views
15 Pages

A Single Motor-Driven Focusing Mechanism with Flexure Hinges for Small Satellite Optical Systems

  • Jinwon Jung,
  • Nguyen Van Sy,
  • Dongkyu Lee,
  • Seonggun Joe and ,
  • Jaihyuk Hwang and
  • Byungkyu Kim
  • + 1 author+ 0 author

12 October 2020

For earth observation, the optical systems in small satellites are crucial to obtain high- resolution images. However, the alignment between a primary and a secondary mirror in an optical system can be disturbed due to the harsh environments inside v...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
12 Citations
2,539 Views
16 Pages

On the Dependency of the Electromechanical Response of Rotary MEMS/NEMS on Their Embedded Flexure Hinges’ Geometry

  • Alessio Buzzin,
  • Lorenzo Giannini,
  • Gabriele Bocchetta,
  • Andrea Notargiacomo and ,
  • Ennio Giovine,
  • Andrea Scorza,
  • Rita Asquini,
  • Giampiero de Cesare and
  • Nicola Pio Belfiore
  • + 4 authors+ 0 author

12 December 2023

This paper investigates how the electromechanical response of MEMS/NEMS devices changes when the geometrical characteristics of their embedded flexural hinges are modified. The research is dedicated particularly to MEMS/NEMS devices which are actuate...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
443 Views
22 Pages

2 September 2026

Reinforced concrete (RC) beams undergo axial elongation during inelastic flexural deformation. In frame structures, this elongation is restrained by adjacent columns and slabs, inducing axial compression and beam overstrength, thereby amplifying forc...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
13 Citations
7,671 Views
19 Pages

Development and Testing of Woven FRP Flexure Hinges for Pressure-Actuated Cellular Structures with Regard to Morphing Wing Applications

  • Patrick Meyer,
  • Johannes Boblenz,
  • Cornelia Sennewald,
  • Michael Vorhof and ,
  • Christian Hühne,
  • Chokri Cherif and
  • Michael Sinapius
  • + 2 authors+ 0 author

23 October 2019

Shape-variable structures can change their geometry in a targeted way and thus adapt their outer shape to different operating conditions. The potential applications in aviation are manifold and far-reaching. The substitution of conventional flaps in...

(This article belongs to the Special Issue Aeronautical Systems for Flow Control)
  • Article
  • Open Access
6 Citations
3,297 Views
16 Pages

A Compact Piezo-Inertia Actuator Utilizing the Double-Rocker Flexure Hinge Mechanism

  • Pingping Sun,
  • Chenglong Lei,
  • Chuannan Ge,
  • Yunjun Guo and
  • Xingxing Zhu

26 May 2023

With a simple structure and control method, the piezo-inertia actuator is a preferred embodiment in the field of microprecision industry. However, most of the previously reported actuators are unable to achieve a high speed, high resolution, and low...

(This article belongs to the Special Issue Acoustic Transducers and Their Applications)
  • Article
  • Open Access
6 Citations
2,713 Views
16 Pages

17 August 2022

With the widespread application of pipelines in engineering, more and more accidents occur because of pipeline leakage. Therefore, it is particularly important to continuously monitor the pipeline pressure. In this study, a non-intrusive and high-sen...

(This article belongs to the Section Optical and Photonic Materials)
  • Article
  • Open Access
10 Citations
5,523 Views
18 Pages

14 September 2022

Continuum robots are increasingly being used in industrial and medical applications due to their high number of degrees of freedom (DoF), large workspace and their ability to operate dexterously. However, the positional accuracy of conventional conti...

(This article belongs to the Section Intelligent Robots and Mechatronics)
  • Article
  • Open Access
39 Citations
5,297 Views
22 Pages

9 July 2021

Multi-dimensional acceleration sensors are used in important applications in the aerospace, weapon equipment, and nuclear fields and have strict requirements in terms of performance, volume, and mass. Fiber Bragg grating acceleration sensors use opti...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
21 Citations
4,575 Views
28 Pages

Innovative designs such as morphing wings and terrain adaptive landing systems are examples of biomimicry and innovations inspired by nature, which are actively being investigated by aerospace designers. Morphing wing designs based on Variable Geomet...

(This article belongs to the Special Issue Compliant vs Kinematic Morphing Architectures: Complementary or Alternatives?)
  • Article
  • Open Access
1 Citations
459 Views
23 Pages

Preliminary Experimental Study on the Flexural Behavior of High-Strength Castellated Steel–UHPC Composite Beams with Hinged-Bolt Shear Connectors

  • Shiqiang Feng,
  • Yong Yang,
  • Xin Chen,
  • Yicong Xue and ,
  • Yunlong Yu,
  • Jiuzhou He,
  • Yang Chen and
  • Dongde Sun
  • + 3 authors+ 0 author

28 August 2026

High-strength steel–ultra-high-performance concrete (UHPC) composite beams provide an efficient solution for lightweight and high-capacity building structures. This study presents a preliminary experimental investigation on the flexural behavio...

(This article belongs to the Special Issue Green, Resilient, and Sustainable Composite Structures: Development, Design, and Construction: 2nd Edition)
  • Article
  • Open Access
13 Citations
7,960 Views
16 Pages

19 November 2017

This study presents a two-dimensional micro-/nanoradian angle generator (2D-MNAG) that achieves high angular displacement resolution and repeatability using a piezo-driven flexure hinge for two-dimensional deflections and three capacitive sensors for...

(This article belongs to the Special Issue Piezoelectric Micro- and Nano-Devices)
  • Article
  • Open Access
8 Citations
4,935 Views
14 Pages

A Novel Stick-Slip Nanopositioning Stage Integrated with a Flexure Hinge-Based Friction Force Adjusting Structure

  • Junhui Zhu,
  • Peng Pan,
  • Yong Wang,
  • Sen Gu and ,
  • Rongan Zhai,
  • Ming Pang,
  • Xinyu Liu and
  • Changhai Ru
  • + 3 authors+ 0 author

11 August 2020

The piezoelectrically-actuated stick-slip nanopositioning stage (PASSNS) has been applied extensively, and many designs of PASSNSs have been developed. The friction force between the stick-slip surfaces plays a critical role in successful movement of...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
4 Citations
4,333 Views
12 Pages

An anthropomorphic wind turbine blade was the suggested design that had a flexure hinge at root, middle, and tip regions. The inter-distances of the flexure hinges follow the Fibonacci sequence and resembled the natural finger through binding. Theref...

(This article belongs to the Special Issue New Advances in Ceramic Coatings and Its Applications)
  • Article
  • Open Access
4 Citations
4,293 Views
21 Pages

30 June 2022

Compliant joints are flexible elements that allow displacement due to the elastic deformations they experience under the action of external loading. The flexible parts responsible for these displacements are known as flexure hinges. Displacement, or...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
65 Citations
8,849 Views
14 Pages

Design and Experimental Research of a Novel Stick-Slip Type Piezoelectric Actuator

  • Mingxing Zhou,
  • Zunqiang Fan,
  • Zhichao Ma,
  • Hongwei Zhao and ,
  • Yue Guo,
  • Kun Hong,
  • Yuanshang Li,
  • Hang Liu and
  • Di Wu
  • + 4 authors+ 0 author

A linear piezoelectric actuator based on the stick-slip principle is presented and tested in this paper. With the help of changeable vertical preload force flexure hinge, the designed linear actuator can achieve both large travel stick-slip motion an...

  • Article
  • Open Access
19 Citations
5,843 Views
11 Pages

Fabrication, Experiments, and Analysis of an LBM Additive-Manufactured Flexure Parallel Mechanism

  • Huaxian Wei,
  • Li Wang,
  • Xiaodong Niu,
  • Jian Zhang and
  • Alessandro Simeone

5 November 2018

Additive manufacturing technology has advantages for realizing complex monolithic structures, providing huge potential for developing advanced flexure mechanisms for precision manipulation. However, the characteristics of flexure hinges fabricated by...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
4 Citations
1,869 Views
23 Pages

Study of the Equivalent Stiffness of a Non-Contact Piezoelectric Actuator’s Micro-Displacement Amplification Mechanism

  • Huaiyong Li,
  • Dongya Zhang,
  • Yusheng Lin,
  • Yue Yang and ,
  • Zhiwei Shi and
  • Chong Li
  • + 1 author+ 0 author

25 August 2025

To address the issues of mechanical wear and limited service life in conventional contact piezoelectric actuators, this study proposes a non-contact piezoelectric actuator employing compressed air for energy transmission; we elucidate its structure a...

  • Article
  • Open Access
490 Views
26 Pages

25 August 2026

Piezoelectric-actuated nanopositioning stages commonly employ flexure amplification mechanisms to enlarge output displacement and are widely used in optical measurement, micro and nano manufacturing, and other precision engineering fields. However, e...

(This article belongs to the Special Issue Piezoelectric Actuators and Motors: From Theory to Applications)
  • Article
  • Open Access
20 Citations
4,126 Views
13 Pages

Compliant Nano-Pliers as a Biomedical Tool at the Nanoscale: Design, Simulation and Fabrication

  • Alessio Buzzin,
  • Serena Cupo,
  • Ennio Giovine,
  • Giampiero de Cesare and
  • Nicola Pio Belfiore

8 December 2020

This paper presents the development of a multi-hinge, multi-DoF (Degrees of Freedom) nanogripper actuated by means of rotary comb drives and equipped with CSFH (Conjugate Surface Flexure Hinges), with the goal of performing complex in-plane movements...

(This article belongs to the Section B: Biology and Biomedicine)
  • Article
  • Open Access
3 Citations
2,432 Views
13 Pages

Amplification Ratio of a Recycled Plastics-Compliant Mechanism Flexure Hinge

  • Tran Minh The Uyen,
  • Pham Son Minh,
  • Van-Thuc Nguyen,
  • Thanh Trung Do and ,
  • Hai Nguyen Le Dang and
  • Van Thanh Tien Nguyen
  • + 1 author+ 0 author

29 November 2023

This research focuses on the fabrication of plastic flexure hinges from diverse plastics such as ABS, PP, HDPE, and LDPE. To enhance hinge efficiency, the recycling ratios are also investigated. The amplification ratio of different recycle ratios and...

(This article belongs to the Section Environmental Sciences)
  • Article
  • Open Access
8 Citations
4,056 Views
20 Pages

Calibration of the Length of the Plastic Hinge for Numerical Models of Reinforced Concrete Members

  • Francesca Barbagallo,
  • Melina Bosco,
  • Andrea Floridia,
  • Edoardo M. Marino and ,
  • Dario Panarelli,
  • Pier Paolo Rossi and
  • Nino Spinella
  • + 2 authors+ 0 author

4 October 2022

A proper and computationally efficient numerical modeling of the nonlinear cyclic flexural behavior of reinforced concrete members is crucial for the assessment of the seismic response of RC framed structures. To mitigate the problem of damage locali...

(This article belongs to the Special Issue Seismic Design of Building Structures)
  • Article
  • Open Access
3 Citations
3,393 Views
21 Pages

29 November 2021

This study presents a strengthening method for reinforced concrete (RC) columns. The proposed method, which consists of a pair of steel rods, two reverse-threaded couplers, and four corner blocks, is feasible and straightforward. A quasi-static cycli...

  • Article
  • Open Access
6 Citations
3,694 Views
15 Pages

29 September 2022

Taking advantage of the concurrent stretching and bending property of corrugated flexure hinges, a sinusoidal corrugated flexure linkage was proposed and applied for the construction of a corrugated dual-axial mechanism with structural symmetry and d...

(This article belongs to the Special Issue Actuating, Sensing, Control, and Instrumentation for Ultra Precision Engineering)
  • Article
  • Open Access
3 Citations
2,399 Views
22 Pages

14 April 2024

A novel 2PRS-2PSS (P represents the prismatic pair, R represents the revolute hinge, S represents the spherical hinge) compliant parallel micromanipulator with two translational DOFs and two rotational DOFs is presented, and its compliance model and...

(This article belongs to the Special Issue Advanced Micro-/Nano-Manipulation and Positioning Techniques)
  • Article
  • Open Access
641 Views
13 Pages

Research on Kinematic Error of Pendulum Interferometer Based on Optomechanical Coupled Simulation

  • Zhijie Wu,
  • Dacheng Li,
  • Wei Xiong,
  • Wenpeng Liu and ,
  • Zhicheng Cao and
  • Yangyu Li
  • + 1 author+ 0 author

To address the issue of normal displacement deviation induced by the geometric nonlinearity of cross-spring flexural pivots in pendulum-type interferometers, which leads to modulation attenuation, this study proposes a co-simulation method combining...

(This article belongs to the Special Issue Precision Measurement and Perception: Enabled by Advanced Optical Sensing, Imaging, and LiDAR Technologies)
  • Article
  • Open Access
6 Citations
5,535 Views
28 Pages

Design and Analysis of a Novel Flexure-Based XY Micropositioning Stage

  • Chenlei Jiao,
  • Zhe Wang,
  • Bingrui Lv,
  • Guilian Wang and
  • Weiliang Yue

24 November 2020

Flexure-based micropositioning stages with high positioning precision are really attractive. This paper reports the design and analysis processes of a two-degree-of-freedom (2-DOF) flexure-based XY micropositioning stage driven by piezoelectric actua...

  • Article
  • Open Access
1,507 Views
28 Pages

30 July 2026

Piezoelectric flexure micro-positioning stages are essential micromotion actuators for micro-assembly, atomic force microscopy and nano-manufacturing, but intrinsic hysteresis nonlinearity of piezoelectric stacks distorts the linear voltage-to-displa...

  • Article
  • Open Access
7 Citations
12,255 Views
12 Pages

16 May 2012

Flexible structures are the main components in many precision measuring and research systems. They provide miniaturization, repeatability, minimal damping, low measuring forces, and very high resolution. This article focuses on the modeling, developm...

  • Article
  • Open Access
3 Citations
1,864 Views
27 Pages

1 September 2025

This paper presents an enhanced pseudo-rigid body model (PRBM) integrated with the LuGre friction law to analyze the dynamic behavior of flexure-hinge-based piezoelectric stick–slip actuators (PSSAs). The PRBM captures flexure compliance throug...

(This article belongs to the Section Automation and Control Systems)
  • Article
  • Open Access
19 Citations
4,158 Views
25 Pages

30 March 2023

The kinematic synthesis of compliant mechanisms based on flexure hinges is not an easy task. A commonly used method is the equivalent rigid model, which involves replacing the flexure hinges with rigid bars connected with lumped hinges using the alre...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
6 Citations
3,792 Views
13 Pages

27 April 2023

A novel linear piezo inertia actuator based on the transverse motion principle is proposed. Under the action of the transverse motion of two parallel leaf-springs, the designed piezo inertia actuator can achieve great stroke movements at a fairly hig...

(This article belongs to the Special Issue Piezoelectric Materials, Devices and Systems)
  • Article
  • Open Access
17 Citations
6,218 Views
12 Pages

Design and Performance Testing of a Novel Three-Dimensional Elliptical Vibration Turning Device

  • Jieqiong Lin,
  • Jinguo Han,
  • Mingming Lu,
  • Jiakang Zhou and ,
  • Yan Gu,
  • Xian Jing and
  • Da Feng
  • + 2 authors+ 0 author

12 October 2017

A novel three-dimensional (3D) elliptical vibration turning device which is on the basis of the leaf-spring-flexure-hinges-based (LSFH-based) double parallel four-bar linkages (DPFLMs) has been proposed. In order to evaluate the performance of the de...

  • Article
  • Open Access
1 Citations
646 Views
29 Pages

26 April 2026

This study presents an analytical investigation and a parametric evaluation of the structural behavior and seismic performance of highly corroded reinforced concrete (RC) columns, based on previously conducted experimental studies by the authors. In...

(This article belongs to the Special Issue Advanced Structural Analysis for Earthquake-Resistant Design of Buildings: 2nd Edition)
  • Article
  • Open Access
6 Citations
3,724 Views
16 Pages

6 March 2023

The local heat and wear generated due to friction in a precision motion stage in electronic packaging equipment have a significant impact on its positioning precision. In this paper, we studied the temperature changes over time and the wear of a line...

(This article belongs to the Section Friction and Tribology)
  • Article
  • Open Access
8 Citations
4,796 Views
16 Pages

A Twisted String, Flexure Hinges Approach for Design of a Wearable Haptic Thimble

  • Daniele Leonardis,
  • Luca Tiseni,
  • Domenico Chiaradia and
  • Antonio Frisoli

29 August 2021

Wearable haptic devices in the shape of actuated thimbles are used to render the sense of touch in teleoperation and virtual reality scenarios. The design of similar devices has to comply with concurring requirements and constraints: lightweight and...

(This article belongs to the Section Actuators for Robotics)
  • Article
  • Open Access
39 Citations
7,620 Views
15 Pages

Optimal Design for Compliant Mechanism Flexure Hinges: Bridge-Type

  • Chia-Nan Wang,
  • Fu-Chiang Yang,
  • Van Thanh Tien Nguyen,
  • Quoc Manh Nguyen and ,
  • Ngoc Thai Huynh and
  • Thanh Thuong Huynh
  • + 1 author+ 0 author

23 October 2021

Compliant mechanisms’ design aims to create a larger workspace and simple structural shapes because these mechanical systems usually have small dimensions, reduced friction, and less bending. From that request, we designed optimal bridge-type complia...

  • Article
  • Open Access
5 Citations
3,229 Views
21 Pages

Dynamic Model of a Conjugate-Surface Flexure Hinge Considering Impacts between Cylinders

  • Alessandro Cammarata,
  • Pietro Davide Maddìo,
  • Rosario Sinatra,
  • Andrea Rossi and
  • Nicola Pio Belfiore

16 June 2022

A dynamic model of a Conjugate-Surface Flexure Hinge (CSFH) has been proposed as a component for MEMS/NEMS Technology-based devices with lumped compliance. However, impacts between the conjugate surfaces have not been studied yet and, therefore, this...

(This article belongs to the Special Issue Flexible Micromanipulators and Micromanipulation)

of 3