Skip to Content

164 Results Found

  • Article
  • Open Access
15 Citations
8,572 Views
13 Pages

Sinterconnects: All-Copper Top-Side Interconnects Based on Copper Sinter Paste for Power Module Packaging

  • Ali Roshanghias,
  • Perla Malago,
  • Jaroslaw Kaczynski,
  • Timothy Polom and ,
  • Jochen Bardong,
  • Dominik Holzmann,
  • Muhammad-Hassan Malik,
  • Michael Ortner,
  • Christina Hirschl and
  • Alfred Binder
  • + 5 authors+ 0 author

13 April 2021

Copper sinter paste has been recently established as a robust die-attach material for high -power electronic packaging. This paper proposes and studies the implementation of copper sinter paste materials to create top-side interconnects, which can su...

  • Article
  • Open Access
2 Citations
2,515 Views
12 Pages

Impact of Hydrogen Voiding in Chip-to-Chip Electroless All-Copper Interconnections

  • Nana Ren,
  • Yuyi Zhang,
  • Wenlong Shu,
  • Chenxiao Lu and ,
  • Wenjing Zhang,
  • Zhuo Chen and
  • Fuliang Wang
  • + 2 authors+ 0 author

30 April 2024

Three-dimensional (3D) integration has become a leading approach in chip packaging. The interconnection density and reliability of micro-bumps in chip stacking are often threatened by high bonding temperatures. The method of building chip-to-chip int...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
3 Citations
2,703 Views
9 Pages

18 February 2023

This study clarifies the conditions for the bridging and conduction of a gap on a metal interconnect using copper microparticles dispersed with silicon oil. An AC voltage applied to a metal interconnect with a gap covered by a dispersion of metal mic...

(This article belongs to the Special Issue Selected Papers from the 13th Symposium on Micro-Nano Science and Technology on Micromachines)
  • Article
  • Open Access
5 Citations
9,774 Views
24 Pages

18 October 2021

Interconnects are significant elements in integrated circuits (ICs), as they connect individual components of the circuit into a functioning whole. To form a void-free interconnect, a thin and uniform copper seed layer must be deposited as a basis fo...

(This article belongs to the Section Surface Sciences and Technology)
  • Article
  • Open Access
12 Citations
4,814 Views
13 Pages

17 September 2022

Interconnections are essential for integrating the packaging substrate, and defect-free copper-filling can further improve the reliability in through holes (THs). The coating properties and filling processes are mainly dominated by the interplays amo...

(This article belongs to the Special Issue Advanced Technologies in Electronic Packaging)
  • Article
  • Open Access
15 Citations
4,615 Views
14 Pages

Structure Inheritance in Nanoparticle Ink Direct-Writing Processes and Crack-Free Nano-Copper Interconnects Printed by a Single-Run Approach

  • Shujie Liu,
  • Yujie Li,
  • Songling Xing,
  • Lei Liu and ,
  • Guisheng Zou and
  • Peng Zhang
  • + 1 author+ 0 author

13 May 2019

When nanoparticle conductive ink is used for printing interconnects, cracks and pores are common defects that deteriorate the electrical conductivity of the printed circuits. Influences of the ink solvent, the solid fraction of the ink, the pre-print...

  • Article
  • Open Access
9 Citations
2,500 Views
15 Pages

16 November 2024

As electronic devices continue to shrink in size and increase in complexity, the current densities in interconnects drastically increase, intensifying the effects of electromigration (EM). This renders the understanding of EM crucial, due to its sign...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
3,117 Views
37 Pages

Molybdenum (Mo) is currently considered as a potential diffusion barrier material for copper (Cu) interconnects, and these interconnect structures are generally processed using the technique of chemical mechanical planarization (CMP). While a limited...

  • Article
  • Open Access
2 Citations
2,369 Views
13 Pages

Advancing Nanoscale Copper Deposition Through Ultrafast-Laser-Activated Surface Chemistry

  • Modestas Sadauskas,
  • Romualdas Trusovas,
  • Evaldas Kvietkauskas,
  • Viktorija Vrubliauskaitė and ,
  • Ina Stankevičienė,
  • Aldona Jagminienė,
  • Tomas Murauskas,
  • Dainius Balkauskas,
  • Alexandr Belosludtsev and
  • Karolis Ratautas
  • + 5 authors+ 0 author

Direct-writing submicron copper circuits on glass with laser precision—without lithography, vacuum deposition, or etching—represents a transformative step in next-generation microfabrication. We present a high-resolution, maskless method...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Communication
  • Open Access
9 Citations
3,517 Views
8 Pages

Laboratory High-Contrast X-ray Microscopy of Copper Nanostructures Enabled by a Liquid-Metal-Jet X-ray Source

  • Kristina Kutukova,
  • Bartlomiej Lechowski,
  • Joerg Grenzer,
  • Peter Krueger and ,
  • André Clausner and
  • Ehrenfried Zschech
  • + 1 author+ 0 author

29 February 2024

High-resolution imaging of Cu/low-k on-chip interconnect stacks in advanced microelectronic products is demonstrated using full-field transmission X-ray microscopy (TXM). The comparison of two lens-based laboratory X-ray microscopes that are operated...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
3 Citations
3,838 Views
12 Pages

13 April 2025

Aluminum–copper alloy (AlCu) is commonly utilized as interconnect material in low-power devices. However, as the size of electronic devices continues to decrease and current density increases, electromigration (EM) has emerged as a significant...

(This article belongs to the Topic Advanced Integrated Circuit Design and Application)
  • Article
  • Open Access
4 Citations
6,235 Views
39 Pages

The manufacturing of integrated circuits involves multiple steps of chemical mechanical planarization (CMP) involving different materials. Mitigating CMP-induced defects is a main requirement of all CMP schemes. In this context, controlling galvanic...

  • Article
  • Open Access
3 Citations
4,482 Views
10 Pages

28 September 2022

The development of new materials for the electronics industry has been in focus in recent years, as circuit miniaturization poses challenges for conventional solutions. Dewetting of Cu films over diffusion-barrier layers has fostered an interest in d...

(This article belongs to the Special Issue Manufacturing, Characterization, and Applications of Functionally Gradient Nanomaterials)
  • Review
  • Open Access
342 Views
15 Pages

Application of Porous Copper-Based Interconnect Materials in Electronic Packaging: A Brief Review

  • Jiahao Liu,
  • Lijin Qiu,
  • Peizhong Wang,
  • Feiyang Wang and ,
  • Jixi Huang,
  • Hongtao Chen,
  • Hao Zhao and
  • Fangzhou Chen
  • + 3 authors+ 0 author

16 September 2026

Driven by the rapid development of deep-space exploration, artificial intelligence, and new energy vehicles, the integration density of power devices has been significantly improved, creating an urgent demand for electronic packaging interconnection...

(This article belongs to the Special Issue Advanced Machining and Technologies in Materials Science)
  • Review
  • Open Access
68 Citations
16,967 Views
24 Pages

12 September 2012

The time dependent dielectric breakdown phenomenon in copper low-k damascene interconnects for ultra large-scale integration is reviewed. The loss of insulation between neighboring interconnects represents an emerging back end-of-the-line reliability...

  • Review
  • Open Access
26 Citations
11,312 Views
24 Pages

As CMOS technology continues to downsize to the nanometer range, the exponential growth predicted by Moore’s Law has been significantly decelerated. Doubling chip density in the two-dimensional domain will no longer be feasible without further...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
1 Citations
1,720 Views
17 Pages

Study on Microstructure and Properties of Micron Copper Powder-Liquid Metal Gallium Composite Interconnect Joint

  • Bo Wang,
  • Siliang He,
  • Guopei Zhang,
  • Menghao Liu and ,
  • Kaixuan He,
  • Wei Huang and
  • Kailin Pan
  • + 2 authors+ 0 author

13 January 2026

Liquid gallium (Ga) enables low-temperature transient liquid phase bonding (TLPB), but optimizing microstructure and joint performance remains challenging. Here, we developed a copper (Cu)-powder/liquid-Ga composite paste for Cu/Cu interconnects and...

(This article belongs to the Special Issue Advanced Materials Processing Technologies for Lightweight Design)
  • Article
  • Open Access
18 Citations
5,100 Views
15 Pages

Structure Performance Correlation of N-Heterocyclic Oligomer Leveler for Acid Copper Plating of Advanced Interconnects

  • Chuan Peng,
  • Yuehui Zhai,
  • Xianming Chen,
  • Chong Wang and ,
  • Yan Hong,
  • Yuanming Chen,
  • Wei He,
  • Guoyun Zhou and
  • Binyun Liu
  • + 4 authors+ 0 author

20 March 2023

Levelers, as an essential part of organic additives in copper electroplating, play a crucial role in the fabrication of sophisticated interconnects in integrated circuits, packaging substrates, and printed circuit boards. In this work, four N-heteroc...

(This article belongs to the Section Applied Chemistry)
  • Article
  • Open Access
15 Citations
7,346 Views
10 Pages

Enhanced Thermal Stability of Sputtered TiN Thin Films for Their Applications as Diffusion Barriers against Copper Interconnect

  • Abdullah Aljaafari,
  • Faheem Ahmed,
  • Nagih M. Shaalan,
  • Shalendra Kumar and
  • Abdullah Alsulami

In this work, the deposition of titanium nitride (TiN) thin film using direct current (DC) sputtering technique and its application as diffusion barriers against copper interconnect was presented. The deposited film was analyzed by using X-ray diffra...

(This article belongs to the Special Issue 10th Anniversary of Inorganics: Inorganic Materials)
  • Article
  • Open Access
12 Citations
4,681 Views
15 Pages

Co-W Barrier Layers for Metallization of Copper Interconnects: Thermal Performance Analysis

  • Bruno M. C. Oliveira,
  • Ruben F. Santos,
  • Ana P. Piedade,
  • Paulo J. Ferreira and
  • Manuel F. Vieira

20 May 2022

The back-end-of-line (BEOL) copper interconnect structure has been subjected to downscaling for the last two decades, while the materials used for conforming and assuring its physical integrity during processing have faced significant obstacles as th...

(This article belongs to the Section Nanofabrication and Nanomanufacturing)
  • Article
  • Open Access
1 Citations
1,202 Views
16 Pages

Copper-Targeted Therapy in Experimental Endometriosis: Effects of Ammonium Tetrathiomolybdate on Markers of the Interconnected Processes of Inflammation, Innervation, and Fibrogenesis

  • María Belén Delsouc,
  • Rocío Ayelem Conforti,
  • Ana Sofia Zabala,
  • Verónica Palmira Filippa and ,
  • Leonardo Mariño-Repizo,
  • Sandra Silvina Vallcaneras and
  • Marilina Casais
  • + 2 authors+ 0 author

22 January 2026

Endometriosis (EDT) is a chronic, estrogen-dependent disease characterized by inflammation, fibrosis, pelvic pain, and infertility. Current therapies show limited long-term efficacy and adverse effects, underscoring the need for novel therapeutic app...

(This article belongs to the Special Issue Molecular Mechanisms, Biomarkers, and Therapeutic Targets for Endometriosis)
  • Review
  • Open Access
64 Citations
31,046 Views
19 Pages

14 September 2022

The Cu/low-k damascene process was introduced to alleviate the increase in the RC delay of Al/SiO2 interconnects, but now that the technology generation has reached 1× nm or lower, a number of limitations have become apparent. Due to the integr...

(This article belongs to the Special Issue Advanced CMOS Devices and Applications)
  • Article
  • Open Access
15 Citations
4,406 Views
14 Pages

8 September 2020

Low-temperature solid oxide fuel cells permit the possibility of metallic interconnects over conventional ceramic interconnects. Among various metallic interconnects, the ferritic interconnects are the most promising. However, chromium poisoning in t...

(This article belongs to the Special Issue Selected Paper from ICPER-2020 (7th International Conference on Production, Energy and Reliability))
  • Article
  • Open Access
7 Citations
2,028 Views
14 Pages

Investigation of 2-Mercapto-1-Methylimidazole as a New Type of Leveler in Wafer Electroplating Copper

  • Tong Tan,
  • Renlong Liu,
  • Lanfeng Guo,
  • Zhaobo He and ,
  • Xing Fan,
  • Rui Ye and
  • Changyuan Tao
  • + 2 authors+ 0 author

2 April 2025

Through-Silicon-Via (TSV) technology is of crucial importance in the process of defect-free copper filling in vias. In this study, the small molecule 2-mercapto-1-methylimidazole (SN2) is proposed as a new leveler. It enables bottom-up super-filling...

(This article belongs to the Special Issue Advanced Electronic Packaging Technology: From Hard to Soft (Second Edition))
  • Review
  • Open Access
676 Views
52 Pages

2 August 2026

The growth of electric vehicles has increased the need for reliable, low-resistance Al–Cu battery interconnects. Laser welding provides localized heat input, high productivity, and automation potential, but Al–Cu joining remains limited b...

(This article belongs to the Special Issue Research Progress of Laser Welding Technology of Metals and Alloys)
  • Article
  • Open Access
3 Citations
1,630 Views
15 Pages

Sintering for High Power Optoelectronic Devices

  • Hannes Schwan,
  • Nihesh Mohan,
  • Maximilian Schmid,
  • Rocky Kumar Saha and ,
  • Holger Klassen,
  • Klaus Müller and
  • Gordon Elger
  • + 2 authors+ 0 author

14 October 2025

Residual-free eutectic Au80Sn20 soldering is still the dominant assembly technology for optoelectronic devices such as high-power lasers, LEDs, and photodiodes. Due to the high cost of gold, alternatives are desirable. This paper investigates the the...

(This article belongs to the Special Issue Emerging Trends in Optoelectronic Device Engineering)
  • Review
  • Open Access
19 Citations
5,409 Views
19 Pages

19 October 2023

With the continuous shrinkage of integrated circuit (IC) dimensions, traditional copper interconnect technology is gradually unable to meet the requirements for performance improvement. Carbon nanotubes have gained widespread attention and research a...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Abstract
  • Open Access
1,416 Views
2 Pages

The Effect of Ultrasonic Agitation on the Seedless Growth of Copper on Ruthenium–Tungsten Thin Films

  • Rúben F. Santos,
  • Bruno M. C. Oliveira,
  • Paulo J. Ferreira and
  • Manuel F. Vieira

Ruthenium (Ru) has attracted considerable attention as a candidate to replace tantalum nitride (TaN) as a diffusion barrier layer for copper (Cu) interconnect metallisation [...]

(This article belongs to the Proceedings of MATERIAIS 2022)
  • Article
  • Open Access
5 Citations
4,433 Views
11 Pages

Evaluating Cu Printed Interconnects “Sinterconnects” versus Wire Bonds for Switching Converters

  • Md. Nazmul Hasan,
  • Timothy Polom,
  • Dominik Holzmann,
  • Perla Malagó and ,
  • Alfred Binder and
  • Ali Roshanghias
  • + 1 author+ 0 author

This paper demonstrates the feasibility of the printed copper (Cu) paste interconnects for applications in power semiconductor modules and switching converters. Copper sinter paste interconnects denoted as “Sinterconnects” have been recen...

(This article belongs to the Section Microelectronics)
  • Article
  • Open Access
2 Citations
3,077 Views
14 Pages

A High Copper Concentration Copper-Quadrol Complex Electroless Solution for Chip Bonding Applications

  • Jeng-Hau Huang,
  • Po-Shao Shih,
  • Vengudusamy Renganathan,
  • Simon Johannes Gräfner and ,
  • Yu-Chun Lin,
  • Chin-Li Kao,
  • Yung-Sheng Lin,
  • Yun-Ching Hung and
  • Chengheng Robert Kao
  • + 4 authors+ 0 author

3 April 2024

This article presents a novel bonding method for chip packaging applications in the semiconductor industry, with a focus on downsizing high-density and 3D-stacked interconnections to improve efficiency and performance. Microfluidic electroless interc...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
31 Citations
10,249 Views
14 Pages

31 May 2016

Miniaturization of electronic devices has led to the development of 3D IC packages which require ultra-small-scale interconnections. Such small interconnects can be completely converted into Cu-Sn based intermetallic compounds (IMCs) after reflow. In...

  • Article
  • Open Access
13 Citations
3,797 Views
10 Pages

Low-Thermal-Budget Photonic Sintering of Hybrid Pastes Containing Submicron/Nano CuO/Cu2O Particles

  • Po-Hsiang Chiu,
  • Wei-Han Cheng,
  • Ming-Tsang Lee,
  • Kiyokazu Yasuda and
  • Jenn-Ming Song

20 July 2021

Copper oxide particles of various sizes and constituent phases were used to form conductive circuits by means of photonic sintering. With the assistance of extremely low-energy-density xenon flash pulses (1.34 J/cm2), a mixture of nano/submicron copp...

(This article belongs to the Special Issue Low-Dimensional Nanomaterials and Their Applications)
  • Communication
  • Open Access
29 Citations
5,956 Views
8 Pages

High Oxidation Resistance of CVD Graphene-Reinforced Copper Matrix Composites

  • Mingliang Wu,
  • Baosen Hou,
  • Shengcheng Shu,
  • Ao Li and ,
  • Qi Geng,
  • He Li,
  • Yumeng Shi,
  • Minghui Yang,
  • Shiyu Du and
  • Cheng-Te Lin
  • + 9 authors+ 4 authors

Copper-based materials are common industrial products which have been broadly applied to the fields of powder metallurgy, electrical contact, and heat exchangers, etc. However, the ease of surface oxidation limits the durability and effectiveness of...

  • Article
  • Open Access
13 Citations
4,263 Views
11 Pages

Nanoscale-Precision Removal of Copper in Integrated Circuits Based on a Hybrid Process of Plasma Oxidation and Femtosecond Laser Ablation

  • Shuai Wang,
  • Yaoyu Wang,
  • Shizhuo Zhang,
  • Lingfeng Wang and ,
  • Shuai Chen,
  • Huai Zheng,
  • Chen Zhang,
  • Sheng Liu,
  • Gary J. Cheng and
  • Feng Liu
  • + 5 authors+ 0 author

30 September 2021

Copper (Cu) is the main interconnect conductor for integrated circuits (IC), and its processing quality is very important to device performance. Herein, a hybrid process of plasma oxidation and femtosecond laser (fs-laser) ablation was proposed for t...

(This article belongs to the Special Issue Microsystem for Electronic Devices)
  • Review
  • Open Access
43 Citations
7,398 Views
19 Pages

20 July 2022

Along with deep scaling transistors and complex electronics information exchange networks, very-large-scale-integrated (VLSI) circuits require high performance and ultra-low power consumption. In order to meet the demand of data-abundant workloads an...

(This article belongs to the Special Issue Advanced Interconnect and Packaging)
  • Article
  • Open Access
4 Citations
2,967 Views
11 Pages

Material Extrusion 3D Printing of Micro-Porous Copper-Based Structure for Water Filters

  • Nikola Kotorčević,
  • Strahinja Milenković,
  • Fatima Živić,
  • Branka Jordović and ,
  • Dragan Adamović,
  • Petar Todorović and
  • Nenad Grujović
  • + 2 authors+ 0 author

12 July 2024

This paper presents 3D-printed micro-porous structures made of a Cu/PLA composite by using material extrusion 3D printing technology. A metallic filament made of 80% copper and 20% polylactic acid (PLA) was used for the 3D printing of the porous samp...

(This article belongs to the Special Issue Recent Advances in 3D Printing in Industry 4.0)
  • Article
  • Open Access
39 Citations
9,719 Views
9 Pages

9 August 2012

Because of their excellent thermal and electric conductivities, copper foams are ideally suited for applications such as heat exchangers, catalyst supports and EMI-shields. Here, we demonstrate the preparation of copper with ~80% aligned, elongated,...

(This article belongs to the Special Issue Selected Papers from the 7th International Conference on Porous Metals and Metallic Foams (MetFoam 2011))
  • Article
  • Open Access
21 Citations
5,402 Views
16 Pages

On the Distribution of Lightning Current among Interconnected Grounding Systems in Medium Voltage Grids

  • Guido Ala,
  • Salvatore Favuzza,
  • Elisa Francomano,
  • Graziella Giglia and
  • Gaetano Zizzo

28 March 2018

This paper presents the results of a first investigation on the effects of lightning stroke on medium voltage installations’ grounding systems, interconnected with the metal shields of the Medium Voltage (MV) distribution grid cables or with bare bur...

(This article belongs to the Special Issue 17TH International Conference on Environment and Electrical Engineering)
  • Article
  • Open Access
4 Citations
2,974 Views
10 Pages

Effect of Carbon-Doped Cu(Ni) Alloy Film for Barrierless Copper Interconnect

  • Lei Wang,
  • Xu Guo,
  • Songtao Dong,
  • Yanxin Qiao and ,
  • Jian Chen,
  • Zhen Yan,
  • Rong Shu and
  • Lei Jin
  • + 3 authors+ 0 author

3 January 2024

In this study, the barrier properties and diffusion behavior of carbon-doped Cu(Ni) alloy film were investigated. The films were fabricated using magnetron sputtering on a barrierless silicon substrate. X-ray diffraction patterns and electric resisti...

(This article belongs to the Topic Properties of the Corroding Interface)
  • Article
  • Open Access
448 Views
20 Pages

22 August 2026

Superhydrophobic SiO2 nanofibers were deposited on copper foam substrates via micro/nano surface modification to improve the pool boiling heat transfer performance of porous copper media. By adopting an electrospinning technique, uniform and robust s...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
5 Citations
7,094 Views
11 Pages

Amorphous-like TiN Films as Barrier Layers for Copper

  • Shicheng Han,
  • Shicheng Yang,
  • Xiaohong Zeng,
  • Ying Wu and ,
  • Tong Liu,
  • Hu Wang and
  • Sunan Ding
  • + 2 authors+ 0 author

31 October 2024

The titanium nitride (TiN) columnar structure results in a rapid diffusion of copper atoms into the substrate along a vertical path. In this paper, the TiN columnar growth process was modified, which resulted in the deposition of amorphous-like films...

(This article belongs to the Section Crystal Engineering)
  • Article
  • Open Access
11 Citations
3,711 Views
12 Pages

Multifunctional Open-Cell Copper Foam with Sphere Pores by a Modified Sintering–Dissolution Process

  • Changxing Li,
  • Yao Wang,
  • Zhipeng Liu,
  • Peiyuan Zheng and ,
  • Qi Zhang and
  • Bin Han
  • + 1 author+ 0 author

17 April 2023

In this study, open-cell copper foam with completely interconnected sphere pores was prepared by a modified sintering–dissolution process using a preformed calcium chloride template skeleton as space holder. Compared with the traditional foamin...

  • Article
  • Open Access
22 Citations
4,462 Views
13 Pages

9 January 2023

Interatomic interaction potentials are compared using a molecular dynamics modeling method to choose the simplest, but most effective, model to describe the interaction of copper nanoparticles and graphene flakes. Three potentials are considered: (1)...

(This article belongs to the Special Issue Novel Nanomaterials and Nanostructures)
  • Article
  • Open Access
7 Citations
2,405 Views
13 Pages

15 January 2024

Flexible and stretchable electronic yarn containing electronic components (i.e., hybrid electronic yarn) are essential for manufacturing smart textile garments or fabrics. Due to their low stretchability and easy interconnection fracture, previously...

(This article belongs to the Special Issue Smart Textiles: Synthesis, Characterization and Application)
  • Article
  • Open Access
29 Citations
6,097 Views
14 Pages

Laser-Assisted Selective Fabrication of Copper Traces on Polymers by Electroplating

  • Vitalij Fiodorov,
  • Karolis Ratautas,
  • Zenius Mockus,
  • Romualdas Trusovas and ,
  • Lina Mikoliūnaitė and
  • Gediminas Račiukaitis
  • + 1 author+ 0 author

17 February 2022

The selective deposition of metals on dielectric materials is widely used in the electronic industry, making electro-conductive connections between circuit elements. We report a new low-cost laser-assisted method for the selective deposition of coppe...

(This article belongs to the Topic Application of Graphene-Based Materials)
  • Review
  • Open Access
822 Views
31 Pages

A Review of Research Progresses in Through-Glass Via (TGV) Metallization

  • Tailong Shi,
  • Lihong Chen,
  • Qi Li,
  • Yubing Luo and
  • Shunyu Yao

22 October 2026

Through-glass vias (TGVs), as key vertical interconnect structures in 2.5-D/3-D advanced packaging, offer low dielectric loss, low parasitic capacitance, and excellent high-frequency transmission performance. However, several challenges remain in TGV...

(This article belongs to the Special Issue Electronic and Photonic Device Integration and Packaging)
  • Article
  • Open Access
15 Citations
4,293 Views
13 Pages

Structure Defects and Photovoltaic Properties of TiO2:ZnO/CuO Solar Cells Prepared by Reactive DC Magnetron Sputtering

  • Grzegorz Wisz,
  • Paulina Sawicka-Chudy,
  • Andrzej Wal,
  • Maciej Sibiński and ,
  • Piotr Potera,
  • Rostyslaw Yavorskyi,
  • Lyubomyr Nykyruy,
  • Dariusz Płoch,
  • Mariusz Bester and
  • Olena M. Chernikova
  • + 6 authors+ 1 author

11 March 2023

The problem of copper diffusion in semiconductor devices has been known for several decades as copper has been used as an interconnecting (bonding) metal and has been intensively studied due to its high diffusion coefficient. The influence of the int...

(This article belongs to the Special Issue Advances in Surface Science and Thin Films)
  • Article
  • Open Access
21 Citations
6,341 Views
11 Pages

27 December 2020

Here, in a certain high density interconnect (HDI) printed circuit board, the effect of copper sulfate and sulfuric acid on the filling effect of a blind hole with a certain diameter and depth was investigated by making a blind hole using a CO2 laser...

(This article belongs to the Special Issue Special Issue of Manufacturing Engineering Society-2020 (SIMES-2020))
  • Article
  • Open Access
8 Citations
3,111 Views
15 Pages

Insights into Sorption–Mineralization Mechanism for Sustainable Granular Composite of MgO-CaO-Al2O3-SiO2-CO2 Based on Nanosized Adsorption Centers and Its Effect on Aqueous Cu(II) Removal

  • Alla G. Morozova,
  • Tatiana M. Lonzinger,
  • Vadim A. Skotnikov,
  • Gennady G. Mikhailov and ,
  • Yury Kapelyushin,
  • Mayeen Uddin Khandaker,
  • Amal Alqahtani,
  • D. A. Bradley,
  • M. I. Sayyed and
  • Alex V. Trukhanov
  • + 7 authors+ 2 authors

30 December 2021

Although copper is needed for living organisms at low concentrations, it is one of the pollutants that should be monitored along with other heavy metals. A novel and sustainable composite mineralizing sorbent based on MgO-CaO-Al2O3-SiO2-CO2 with nano...

(This article belongs to the Special Issue Actual Problems of Solid State Physics: Nanomaterials and Nanotechnologies)
  • Article
  • Open Access
9 Citations
6,546 Views
15 Pages

Exploring Topological Semi-Metals for Interconnects

  • Satwik Kundu,
  • Rupshali Roy,
  • M. Saifur Rahman,
  • Suryansh Upadhyay and ,
  • Rasit Onur Topaloglu,
  • Suzanne E. Mohney,
  • Shengxi Huang and
  • Swaroop Ghosh
  • + 3 authors+ 0 author

The size of transistors has drastically reduced over the years. Interconnects have likewise also been scaled down. Today, conventional copper (Cu)-based interconnects face a significant impediment to further scaling since their electrical conductivit...

of 4