Skip to Content

418 Results Found

  • Article
  • Open Access
16 Citations
6,111 Views
11 Pages

19 August 2019

The present study focuses on the aerodynamic performance and structural analysis of the centrifugal compressor impeller. The performance characteristics of the impeller are analyzed with and without splitter blades by varying the total number of main...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1,909 Views
13 Pages

11 January 2024

Compressor characteristic evaluation is a critical step in design and optimization. Corrected characteristic curves are typically derived via experimental testing or CFD computation which is typically executed through manual manipulation. For compres...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
12 Citations
4,108 Views
30 Pages

Sensitivity Analysis of Multistage Compressor Characteristics Under the Spray Atomization Effect Using a CFD Model

  • Chunlei Liu,
  • Qun Zheng,
  • Qi Wang,
  • Aqiang Lin and ,
  • Yuting Jiang and
  • Mingcong Luo
  • + 1 author+ 0 author

18 January 2019

In this paper, a CFD model is used to simulate the effect of spray atomization at the compressor inlet on a multistage axial subsonic compressor. Special attention is paid to the change of compressor characteristics with wet compression under differe...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
2,768 Views
19 Pages

Energy Characteristics of the Compressor in a Heat Pump Based on Energy Conversion Theory

  • Yingju Pei,
  • Zhezhong Xue,
  • Xu Luo,
  • Lei Zeng and ,
  • Xiaohua Xiao,
  • Huyang Xu and
  • Li Kou
  • + 2 authors+ 0 author

8 February 2025

The compressor in the heat pump is crucial for efficient geothermal energy utilization, but faces challenges in optimizing energy efficiency, especially under variable working conditions. This paper investigates the complex energy characteristics of...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
3 Citations
2,209 Views
21 Pages

Study on Through-Flow Characteristics of a Diesel Two-Stage Supercharged Centrifugal Compressor under Variable-Altitude and Multiple Operating Conditions

  • Qikai Peng,
  • Ruilin Liu,
  • Guangmeng Zhou,
  • Xumin Zhao and ,
  • Surong Dong and
  • Zhongjie Zhang
  • + 1 author+ 0 author

23 December 2023

Understanding the influence of environmental boundary parameters on the through-flow characteristics of two-stage supercharged centrifugal compressors is the key to maximizing the power recovery potential of diesel engines at high altitudes. In this...

  • Article
  • Open Access
1 Citations
1,953 Views
35 Pages

Numerical Study on the Transient Pneumatic Characteristics of a Piston-Type Air Compressor During the Compressing Process

  • Yan-Juan Zhao,
  • Bing-Yin Zhou,
  • Hui-Fan Huang,
  • Wan-Wan Tian and ,
  • Yan-Jie Wang,
  • Hai-Bin Lin,
  • Liang-Huai Tong and
  • Yu-Liang Zhang
  • + 3 authors+ 0 author

16 April 2025

To investigate the pneumatic characteristics of a piston-type air compressor during the rapid transient processes of intake and compression, this study establishes a computational model incorporating the tank, valves, cylinder, intake and discharge p...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
9 Citations
2,963 Views
31 Pages

20 July 2023

Heavy-duty diesel engines equipped with turbochargers is an effective way to alleviate energy shortage and reduce gas emissions, but their compressor aerodynamic noise emissions have become an important issue that needs to be addressed urgently. Ther...

(This article belongs to the Special Issue Emerging Research in Rotary Engines and Sustainability in Vehicle Engineering)
  • Article
  • Open Access
2 Citations
3,545 Views
14 Pages

20 March 2023

A four-blade-passage numerical model was developed for a two-stage axial-flow compressor with an inlet guide vane (IGV) for the purpose of studying the steady and dynamic characteristics of the compressor approaching its stability limit. The flow-fie...

(This article belongs to the Special Issue Selected Papers from CITC2022)
  • Article
  • Open Access
1 Citations
1,820 Views
24 Pages

Aerodynamic Characteristics of Typical Operating Conditions and the Impact of Inlet Flow Non-Uniformity in a Multi-Stage Transonic Axial Compressor

  • Dong Jiang,
  • Huadong Li,
  • Chongyang Liu,
  • Yang Hu and ,
  • Yongbo Li,
  • Yunfei Yan and
  • Chenghua Zhang
  • + 2 authors+ 0 author

7 May 2025

Multi-stage axial compressors play a crucial role in aerospace propulsion systems, as their exit flow field characteristics directly impact engine performance and stability. This study conducted numerical simulations on the first 3.5 stages of the NA...

(This article belongs to the Special Issue Numerical Simulation of Flow and Heat Transfer Processes)
  • Article
  • Open Access
19 Citations
6,052 Views
17 Pages

Investigation on Dynamic Characteristics of the Reed Valve in Compressors Based on Fluid-Structure Interaction Method

  • Yanfeng Wang,
  • Jin Wang,
  • Zhilong He,
  • Junwei Sun and ,
  • Tao Wang and
  • Changhai Liu
  • + 1 author+ 0 author

27 April 2021

The flow in the gap between the reed and the valve seat has a significant influence on the dynamic characteristics of the reed valve used in reciprocating compressors. The fluid–structure interaction (FSI) method is an effective method for studying r...

(This article belongs to the Special Issue Thermodynamic and Exergy Analyses of Cooling, Power, and Energy Systems)
  • Article
  • Open Access
3 Citations
2,580 Views
21 Pages

Investigation on Characterization of Typical Characteristic in Compressor Based on Flat Plate Model

  • Fengtong Zhao,
  • Bo Cui,
  • Fei Wu,
  • Shan Jiang and ,
  • Mingsui Yang and
  • Yuying Chen
  • + 1 author+ 0 author

13 May 2022

The acoustic resonance of aero-engine compressors is very harmful, which can lead to the failure of components such as blades. The mechanism of acoustic resonance is very complicated. To solve this problem, characteristics of the noise signal under t...

(This article belongs to the Special Issue Aircrafts Reliability and Health Management)
  • Article
  • Open Access
18 Citations
6,228 Views
15 Pages

A centrifugal compressor working with supercritical CO 2 (S-CO 2 ) has several advantages over other supercritical and conventional compressors. S-CO 2 is as dense as the liquid CO 2 and becomes difficult to compress. T...

(This article belongs to the Special Issue Computational Heat, Mass and Momentum Transfer)
  • Article
  • Open Access
3 Citations
10,094 Views
17 Pages

28 March 2022

Liquid often exists in the accumulator of the rotary compressor during the process of startup or defrost of air-conditioning systems. Too much liquid entering the compressor cylinder would result in excessive pressure caused by the liquid compression...

(This article belongs to the Section G: Energy and Buildings)
  • Article
  • Open Access
40 Citations
8,782 Views
17 Pages

23 March 2017

Supercritical carbon dioxide (SCO2) is a vital working fluid in the application of power units and its high density helps to achieve a compact mechanical structure. Centrifugal compressors are of vital use in various kinds of equipment. In this paper...

(This article belongs to the Special Issue The Applications of Supercritical Carbon Dioxide)
  • Article
  • Open Access
16 Citations
5,208 Views
20 Pages

12 March 2020

High impact and strong noise complicate the response of reciprocating compressor (RC). It requires a complex signal processing method that is a single response-based or excitation-based fault diagnosis method applied to RC valve leakage fault diagnos...

  • Feature Paper
  • Article
  • Open Access
9 Citations
3,277 Views
24 Pages

Numerical Simulation on the Influence of Inlet Flow Characteristics on the Performance of a Centrifugal Compressor

  • Xing Li,
  • Ning Huang,
  • Guanyan Chen,
  • Yanli Zhang and ,
  • Yang Zhao,
  • Jie Zhang and
  • Ding Tong
  • + 2 authors+ 0 author

2 May 2023

Although inlet bent pipes are usually adopted due to limited installation space, the influences of different bend pipes on the inlet flow characteristics and performance of centrifugal compressors are still unclear. The numerical simulation of a cent...

  • Article
  • Open Access
2,424 Views
22 Pages

7 July 2022

An experiment with a multistage high-speed compressor is conducted to investigate the high noise with abnormal blade vibration. Different points are selected to monitor the noise in the compressor and the amplitude of blade vibration. The evolution r...

(This article belongs to the Special Issue Aircrafts Reliability and Health Management)
  • Article
  • Open Access
1 Citations
1,934 Views
29 Pages

29 January 2026

The suction and discharge reed valves are critical components of reciprocating refrigeration compressors, as their dynamic behavior strongly affects the compressor performance. This study investigates the interaction mechanism between unsteady flow c...

(This article belongs to the Section Mathematical and Computational Fluid Mechanics)
  • Article
  • Open Access
9 Citations
3,755 Views
16 Pages

31 March 2023

Hyper-compressors play an important role in polymer production. However, due to the extremely high pressure and complex geometries, it is difficult to monitor and calculate the thermodynamic characteristics and pressure pulsation. In this research, a...

  • Feature Paper
  • Article
  • Open Access
17 Citations
3,978 Views
11 Pages

17 February 2021

In the article, the mechanical and electromechanical starting characteristics of an asynchronous electric drive of a two-piston ship compressor are investigated by a numerical method. A distinctive feature of the operation of the electric drive of a...

(This article belongs to the Special Issue Maritime Engineering, Industry Development Prospects)
  • Article
  • Open Access
6 Citations
3,417 Views
18 Pages

29 May 2023

An axial compressor has high efficiency under design conditions, but its stable working range is narrow. Adjusting the rotational speed can effectively expand the stable working range. In this paper, a five-stage axial compressor for a specific compr...

(This article belongs to the Special Issue Advanced Technologies for Compressed Air Energy Storage/Thermal Storage Systems)
  • Article
  • Open Access
9 Citations
5,094 Views
22 Pages

Study on Characteristics and Control of Aerodynamic Noise of a High-Speed Centrifugal Air Compressor for Vehicle Fuel Cells

  • Shizhong Sun,
  • Ziwen Xing,
  • Wenqing Chen,
  • Minglong Zhou and ,
  • Chuang Wang and
  • Hanyang Cui
  • + 1 author+ 0 author

4 October 2022

As the main noise source in the hydrogen fuel cell system, the noise level of the centrifugal air compressor greatly affects the comfort of the hydrogen fuel cell vehicle. For reducing the noise level of centrifugal air compressors, the noise charact...

(This article belongs to the Special Issue Recent Advances in Noise Barriers)
  • Article
  • Open Access
5,267 Views
12 Pages

31 December 2018

A magnetic chicane bunch compressor for a new compact accelerator-based terahertz (THz) radiation source at the Institute of Advanced Energy, Kyoto University, was completely installed in March 2016. The chicane is employed to compress an electron bu...

(This article belongs to the Special Issue Superradiances from Ultra Short Electron Bunch Beam)
  • Article
  • Open Access
3 Citations
2,948 Views
20 Pages

21 December 2022

Spatiotemporal evolution and fluctuation characteristics of a centrifugal compressor are investigated by numerical simulation under near-stall conditions and with a high mass-flow rate. The large-eddy simulation (LES) for unsteady computations is imp...

(This article belongs to the Special Issue Complex Flow in Fluid Machinery)
  • Article
  • Open Access
3 Citations
2,819 Views
13 Pages

Analysis of Trajectory Tracking Characteristics of a Magnetically Driven Oil-Free Scroll Compressor

  • Ce Shi,
  • Feng Sun,
  • Fangchao Xu,
  • Junjie Jin and ,
  • Ling Tong,
  • Qing Zhou and
  • Koichi Oka
  • + 2 authors+ 0 author

27 October 2022

The conventional scroll compressor cannot run oil-free because of wear and tear and lubrication problems during operation due to some parts, such as anti-rotation devices. The magnetic drive oil-free scroll compressor (MDOFSC) uses a contactless driv...

(This article belongs to the Special Issue Advanced Theory and Application of Magnetic Actuators)
  • Article
  • Open Access
3 Citations
3,185 Views
27 Pages

26 December 2024

Air compressors play an important role in energy, mining, civil engineering, and transportation engineering. However, the abnormal vibration and noise of air compressors may pose a serious threat to the structural stability and smooth operation of th...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
18 Citations
5,512 Views
21 Pages

16 July 2019

The performance of an automotive turbocharger centrifugal compressor has been studied by developing a comprehensive one-dimensional (1D) code as verified through experimental results and a three-dimensional (3D) model. For 1D analysis, the fluid stre...

  • Article
  • Open Access
9 Citations
3,435 Views
22 Pages

3 April 2022

Serving as a key component of the core engine, the high-load axial compressor is expected to have high performance, which determines several critical parameter levels of the aero-engine. The unsteady effect on the performance induced by the interacti...

(This article belongs to the Special Issue Advanced Research on High-Energy Performance Compressors)
  • Article
  • Open Access
1 Citations
4,500 Views
18 Pages

24 May 2023

A low specific speed centrifugal compressor with leading/trailing edge combined sweep blades is proposed. The performance and internal flow field characteristics are analyzed in detail by numerical simulations, and a bench test is carried out. It is...

  • Article
  • Open Access
6 Citations
4,949 Views
16 Pages

23 October 2021

Water-lubricated single-screw compressors (WSSCs) have developed rapidly in recent years because they can supply oil-free compressed air at considerably low costs. However, a major technical obstacle is that the conventional bearing arrangement of a...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
10 Citations
5,827 Views
21 Pages

30 April 2021

Improving compressor efficiency is very important to save energy and reduce greenhouse gas emissions. A novel oil-free dual piston compressor prototype driven by a moving coil linear motor was developed, and its working principle was described in det...

(This article belongs to the Special Issue Sustainable and Renewable Energy Technologies in the Built Environment)
  • Review
  • Open Access
11 Citations
3,195 Views
23 Pages

Review and Prospects of Numerical Simulation Research on Internal Flow and Performance Optimization of Twin-Screw Compressors

  • Yiqiao Li,
  • Xing Zhao,
  • Shan Liu,
  • Chen Wang and ,
  • Shenqiang Shen and
  • Yali Guo
  • + 1 author+ 0 author

18 May 2025

The twin-screw compressor exhibits significant application value in the fields of energy, refrigeration, construction, transportation, and related domains. Owing to the benefits of short cycles and low costs, numerical simulation technology has attra...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
6 Citations
3,928 Views
18 Pages

Experimental and Numerical Analysis of the Impeller Backside Cavity in a Centrifugal Compressor for CAES

  • Zhihua Lin,
  • Zhitao Zuo,
  • Wei Li,
  • Jianting Sun and ,
  • Xin Zhou,
  • Haisheng Chen and
  • Xuezhi Zhou
  • + 2 authors+ 0 author

6 January 2022

Relying on a closed test rig of a high-power intercooling centrifugal compressor for compressed air energy storage (CAES), this study measured the static pressure and static temperature at different radii on the static wall of the impeller backside c...

(This article belongs to the Special Issue Advanced Technologies for Compressed Air Energy Storage/Thermal Storage Systems)
  • Article
  • Open Access
1 Citations
695 Views
34 Pages

Study on Thermal–Fluid–Solid Coupling Characteristics of a Scroll Compressor in an Oil–Gas Waste Heat Recovery Heat Pump System

  • Yingju Pei,
  • Jingxian Zeng,
  • Lei Zeng,
  • Li Kou and ,
  • Xu Luo and
  • Yangqi Liu
  • + 1 author+ 0 author

Heat pump technology can efficiently recover waste heat from oil and gas gathering, processing, and transportation. However, the energy transfer mechanism of high-speed rotating internal flow in the scroll compressor remains unclear under unbalanced...

(This article belongs to the Section Turbomachinery)
  • Article
  • Open Access
16 Citations
4,002 Views
17 Pages

23 April 2023

In order to accurately calculate the geometric characteristics of the twin-screw compressor and obtain the optimal profile parameters, a calculation method for the geometric characteristics of twin-screw compressors was proposed to simplify the profi...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
6 Citations
2,206 Views
29 Pages

Research on the Diaphragm Movement Characteristics and Cavity Profile Optimization of a Dual-Stage Diaphragm Compressor for Hydrogen Refueling Applications

  • Chongzhou Sun,
  • Zhilong He,
  • Dantong Li,
  • Xiaoqian Chen and ,
  • Jie Tang,
  • Manguo Yan and
  • Xiangjie Kang
  • + 2 authors+ 0 author

27 July 2025

The large-scale utilization of hydrogen energy is currently hindered by challenges in low-cost production, storage, and transportation. This study focused on investigating the impact of the diaphragm cavity profile on the movement behavior and stress...

(This article belongs to the Section Mechanical Engineering)
  • Feature Paper
  • Article
  • Open Access
8 Citations
3,146 Views
25 Pages

16 July 2021

A novel parametric control method for the compressor blade, the full-blade surface parametric method, is proposed in this paper. Compared with the traditional parametric method, the method has good surface smoothness and construction convenience whil...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
1 Citations
3,390 Views
15 Pages

28 March 2023

In a linear compressor, the valve motion significantly affects the thermodynamic efficiency and the compressor’s reliability, especially in oil-free conditions. To better understand the dynamic behavior of the discharge valve, a real-time test...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
1 Citations
3,027 Views
18 Pages

9 December 2020

Tandem blade technology has been developed for years due to its capacity to bear higher aerodynamics than conventional configurations. Even so, there is still the tough problem of how to design tandem blades effectively and further improve blade perf...

(This article belongs to the Section Aerospace Science and Engineering)
  • Review
  • Open Access
6 Citations
2,293 Views
34 Pages

2 January 2026

This study introduces a review on high-speed electrical motors (HSEMs) used for fuel cell (FC) compressor systems, to feed air into the FC stack. This technology is designed for electric vehicle (EV) applications. First, an evaluation of electrical m...

(This article belongs to the Section Transportation and Future Mobility)
  • Article
  • Open Access
4 Citations
3,177 Views
16 Pages

This paper researches the parametric optimization of a two-stage transonic compressor having a large air bypass at partial rotating speed according to flow analysis for a turbine-based combined cycle engine (TBCC). To obtain adequate thrust, the inle...

(This article belongs to the Special Issue Fluid Flow Mechanics (2nd Edition))
  • Article
  • Open Access
578 Views
31 Pages

13 August 2026

Variable-speed operation of scroll compressors is a prevailing trend for energy saving in refrigeration systems; however, complex electromagnetic excitation induces prominent vibration and noise, yet its dominant timing, spatial distribution, and act...

(This article belongs to the Section Electromechanical Energy Conversion Systems)
  • Article
  • Open Access
2 Citations
3,372 Views
14 Pages

Stall Mode Transformation in the Wide Vaneless Diffuser of Centrifugal Compressors

  • Yaguang Heng,
  • Bo Hu,
  • Qifeng Jiang,
  • Zhengwei Wang and
  • Xiaobing Liu

19 November 2020

A review on the rotating stall in the vaneless diffuser of centrifugal compressors is presented showing that different stall modes characterized by different numbers of cells can be detected within the diffuser even if the operating condition remains...

  • Article
  • Open Access
2 Citations
3,623 Views
15 Pages

Electromagnetic Torque Components Analysis of Ultra-High-Speed Permanent-Magnet Synchronous Motor for Fuel Cell Air Compressor

  • Jiaming Zhou,
  • Jinming Zhang,
  • Fengyan Yi,
  • Donghai Hu and ,
  • Caizhi Zhang,
  • Yanzhao Li,
  • Zhiming Zhang,
  • Guangping Wu and
  • Jinxiang Song
  • + 4 authors+ 0 author

12 May 2024

The ultra-high-speed electric air compressor (UHSEAC) is affected by the electromagnetic torque components of the ultra-high-speed permanent magnet synchronous motor (UHSPMSM) during wide-range speed regulation, resulting in intense speed fluctuation...

  • Article
  • Open Access
3 Citations
3,017 Views
20 Pages

4 December 2023

This study aims to numerically investigate a transonic compressor by solving the unsteady Reynolds-averaged Navier–Stokes equations. The flow mechanisms related to unsteady flow were carefully examined and compared between rotors with non-unifo...

(This article belongs to the Special Issue Computational Fluid Dynamics in Gas Turbines)
  • Article
  • Open Access
5 Citations
2,766 Views
27 Pages

14 August 2023

The research is based on a full 3D model of a medium variable bypass ratio compression system. The effects of core-driven fan stage (CDFS) VIGV adjustment and forward variable area bypass injector (FVABI) adjustment on the internal flow and component...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
9 Citations
4,555 Views
20 Pages

11 November 2020

This paper studies the influence of tip clearance on the flow characteristics related to the performance. Based on full-passage numerical simulation with experimental validation, several clearance models are established and the performance curves are...

(This article belongs to the Special Issue CFD Based Researches and Applications for Fluid Machinery and Fluid Device)
  • Article
  • Open Access
8 Citations
5,553 Views
21 Pages

7 May 2022

This study used Computational Fluid Dynamics (CFD) to simulate and analyze the working fluid in magnetic centrifugal refrigerant compressors using R-134a to mixed refrigerant: R-513A and HFO (Hydrofluoroolefins) Hydrofluoroolefin refrigerant: R-1234y...

(This article belongs to the Special Issue Emerging Technologies in Heating, Ventilation, Air Conditioning and Refrigeration (HVAC&R) Systems)
  • Article
  • Open Access
16 Citations
8,406 Views
16 Pages

7 July 2017

The screw compressor in the early stage of development is generally known as the oil-injection type. However, escalating environmental problems and advances in electronic components have spurred continuous R & D to minimize the oil content in com...

  • Article
  • Open Access
15 Citations
4,734 Views
24 Pages

2 April 2021

The demands to apply transonic centrifugal compressor have increased in the advanced gas turbine engines. Various techniques are used to increase the aerodynamic performance of the centrifugal compressor. The effects of the inclined leading edges in...

(This article belongs to the Special Issue Turbomachinery: Theory, Design and Application)

of 9