- Article
Mg–Ceramic–Ni hybrid foams were fabricated via continuousdepositing micro-arc oxidation (MAO) ceramic coating and electroless Ni coating on the surface of the AZ91D foam struts. Mechanical tests from room temperature (RT) to 300 °C we...
Mg–Ceramic–Ni hybrid foams were fabricated via continuousdepositing micro-arc oxidation (MAO) ceramic coating and electroless Ni coating on the surface of the AZ91D foam struts. Mechanical tests from room temperature (RT) to 300 °C we...
The present work investigates the compressive property of Al matrix composite foams at different temperatures between room temperature and 200 °C. Elevated temperature results in a decreased compressive strength and energy absorption capacity of as-r...
In this study, we fabricated poly (methyl methacrylate) (PMMA) microcellular foams featuring tunable cellular structures and porosity, through adjusting the supercritical CO2 foaming conditions. Experimental testing and finite element model (FEM) sim...
Medicated chewing gums (MCGs) represent a beneficial platform for realizing drugs intended for dental prophylaxis and treatment. The present study aimed to investigate the impact of compression force on the mechanical, textural, release, and chewing...
Tensile and compressive properties of interlayer and intralayer hybrid composites were investigated in this paper. The tensile modulus and compression modulus of interlayer and intralayer hybrid composites are the same under the same mixed ratio, the...
The cell structure and compressive properties of extruded polyethylene terephthalate (PET) foam with different densities were studied. The die of the PET foaming extruder is a special multi-hole breaker plate, which results in a honeycomb-shaped foam...
Self-compacting concrete (SCC) has been widely used in building structures. However, previous research focused only on the mechanical properties and working properties of SCC at room temperature. Thus, there is limited research on the change of compr...
3D (three-dimensional) property volume is an important data carrier for 3D land administration by using 3D cadastral technology, which can be used to express the legal space (property rights) scope matching with physical entities such as buildings an...
A kind of composite was designed and additive manufacturing (AM) technology was utilized in the braiding structure fabrication. The printed polylactic acid (PLA) braiding structures were integrated with two types of resins (Epon 828 resin and urethan...
As renewable and environment-friendly materials, coir and sisal natural fibers can be used in soil reinforcement with minimum cost and other benefits. In this study, we focused on their improvements of unconfined compressive properties of polymer tre...
Multifunctional carbon fiber composites provide promising results such as high strength-to-weight ratio, thermal and electrical conductivity, high-intensity radiated field, etc. for aerospace applications. Tailoring the electrical and structural prop...
The excellent overall performance of polyoxymethylene (POM) fiber enables it to show great potential for engineering applications. The effect of POM fibers on the dynamic compression mechanical properties of concrete is an important issue for its app...
Evaluating the properties of single carbon fibers is crucial, as it provides parameters not only for optimizing carbon fiber production processes but also for enhancing composite material properties. In recent years, significant advancement have been...
The additive manufacturing (AM) of carbon fiber reinforced plastic (CFRP) composites continue to grow due to the attractive strength-to-weight and modulus-to-weight ratios afforded by the composites combined with the ease of processibility achievable...
The compression properties and mechanisms of interlayer and intralayer Carbon/Glass (C/G) hybrid composites were investigated in this work. As revealed from the experimental results, the compression modulus increases linearly with the increase of car...
In order to investigate the effect of tension–compression asymmetry of propellant mechanical properties on the structural integrity of a Nitrate Ester Plasticized Polyether (NEPE) propellant grain, the unified constitutive equations under tensi...
The longitudinal compressive behavior of the three-dimensional four-step braided composites after cyclic hygrothermal aging was investigated using a split Hopkinson pressure bar (SHPB) apparatus under high strain rates (1100~1250 s−1, 1400~1600...
Co-continuous interlocking lattice structures usually present superior compressive properties and energy absorption characteristics. In this study, co-continuous interlocking polydimethylsiloxane/polylactic acid (PDMS/PLA) lattice composites were des...
While the mechanical performance of fused filament fabrication (FFF) parts has been extensively studied in terms of the tensile and bending strength, limited research accounts for their compressive performance. This study investigates the effect of f...
The influence of oolitic hematite on the compressive strength and metallurgical properties of oxidized pellets was examined. The experimental results indicate that when the proportion of oolitic hematite does not exceed 8%, the compressive strength o...
Consideration of the possibility of transporting compressed hydrogen through existing gas pipelines leads to the need to study the regularities of the effect of hydrogen on the mechanical properties of steels in relation to the conditions of their op...
This study used liquefied red mud (RM) sludge, an aluminum industry by-product, as a construction material. Accordingly, various methods were examined that used the fabricated liquefied red mud (LRM) as an admixture for concrete, and the mechanical p...
Porous 2024Al-Al3Zr composites were prepared by in situ and spatial scaffolding methods. As the Al3Zr content increased from 5 wt.% to 30 wt.%, the binding of the powder in the pore wall increased and the defects in the composites decreased. The yiel...
In this study, the basalt fiber content (0%, 0.075%, and 0.15%) and replacement ratio of recycled coarse aggregate (0%, 50%, and 100%) were used as parameters, and the compressive strength of 15 cubes and 15 prisms was analyzed. The failure morpholog...
Three-dimensional braided composites have become one kind of critical engineering material for applications in extreme environments. The 3D stepwise rotary braiding process is one vital technique for manufacturing preforms with high efficiency and fl...
The study investigated the effects of a toughening agent and micron-sized toughening particles (TP) on the resin and carbon fiber-reinforced polymer (CFRP) composites, with a particular focus on compressive strength. The results showed that the addit...
The influence of 3D printing parameters on compressive properties is an important factor in the application of additive manufacturing processes for products subjected to compressive loads in use. In this study, the compressive strength and compressiv...
With the increasing awareness of environmental protection, Green Velvet Material (PLON), a renewable and environmentally friendly material, has been widely applied to mattresses. In order to improve the compressive properties of PLON, a series of exp...
The mechanical properties of agricultural materials can provide the basis for the design and optimisation of agricultural machinery. There are currently very few studies on the mechanical properties of tiger nut tubers, which is not conducive to the...
Currently, research has confirmed the significant potential of 3D printed polymer lattices in enhancing the mechanical properties of cement-based composites. Polymer materials are influenced by high-temperature environments. This study aims to furthe...
In this paper, dynamic compression tests are developed to investigate the dynamic compression mechanical properties of the aluminum honeycomb structures at different strain rates, especially at the high strain rates. The difficulties at the high stra...
Expanded polystyrene (EPS) boxes are used for the packaging of perishable and vulnerable goods during transportation; for instance, fresh fish fillets. It is important to minimize the weight and cost of the packaging materials while maximizing streng...
Desulfurization slag (DS) is the solid waste discharged from the bottom of the circulating fluidized bed (CFB) boiler. It has good pozzolanic activity, self-hardening property and large expansibility. In this paper, ground desulfurization slag (GDS)...
The incorporation of inorganic oxide fillers imparts superior dielectric properties in silicone rubber for high-voltage insulation. However, the dielectric characteristics are influenced by the mechanical stress. The effects of ramped compression on...
Hybrid Ni/Al foams were fabricated by depositing electroless Ni–P (EN) coatings on open-cell Al foam substrate to obtain enhanced mechanical properties. The microstructure, chemical components and phases of the hybrid foams were observed and analyzed...
Fast-growing poplar wood has the bottleneck problems of inferior mechanical strength and poor dimensional stability. In this study, the wood was modified by combined treatments of pre-compression and post-vacuum-thermo modification to improve its mec...
The 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105) is a newly energetic material with an excellent performance and low sensitivity and has attracted considerable attention. On the basis of the dispersion-corrected density functional theory (DFT-D)...
Based on molecular dynamics simulation, this work investigated the influences of temperature and Ti volume fractions on the compressive deformation of Ti/Al layered composites. According to the simulation, the initial dislocations during compression...
Open-cell PU foams have a wide range of industrial applications due to their excellent cushioning, impact protection, packaging, thermal insulation, and sound reduction benefits. The foams absorb impact energy while deforming under compressing and ar...
The liver and kidneys are the most commonly injured organs due to traumatic impact forces applied to the abdomen and pose a challenge to physicians due to a hard-to-diagnose risk of internal bleeding. A better understanding of the mechanism of injury...
The mechanical failure properties of rigid polyurethane foam treated under random vibration were studied experimentally and by numerical simulation. The random vibration treatments were carried out in the frequency range of 5–500 Hz, 500–...
Using polypropylene (PP) fiber and cement to modify iron-ore tailing and applying it to road engineering is an effective way to reuse iron-ore tailing. The compressive properties and deformation characteristics of PP-fiber-and-cement-modified iron-or...
Hydrogen energy is vital for a clean, low-carbon society, and proton exchange membrane fuel cells (PEMFCs) represent a core technology for the conversion of hydrogen chemical energy into electrical energy. When PEMFC single cells are stacked under as...
This study explores the impact of thermal cycling and rubber particle content on the static and dynamic compressive properties of rubber–polyethylene fiber-reinforced engineered cementitious composites (RPECC). Through static and dynamic compre...
This study investigates the impact of incorporating Juncus fibers (JF) into compressed earth blocks (CEBs) stabilized with varying Portland cement contents, aiming to enhance local construction materials’ performance and reduce housing costs. C...
Studying the bearing mechanism of concrete-filled steel tubular (CFST) arch components and constructing the quantitative design method of the CFST arch is an important subject in underground support. In order to clarify the bending and compression pr...
Early-age masonry structures require temporary support until they achieve full strength. Nevertheless, there is a limited understanding of the properties of freshly laid masonry and the design of newly constructed, unsupported masonry walls. This sit...
European ash (Fraxinus excelsior L.) is one of the species commonly used for wood thermal modification that improves its performance. The presented research aimed to investigate a moisture-dependent strength anisotropy of thermally-modified European...
The development of multi-material filaments has enabled fused filament fabrication-based additive manufacturing to address demand for high-performance lightweight multifunctional components. In this study, polylactic acid (PLA) and acrylonitrile buta...
Seamless knitting technology involves knitting diverse tissue structures in the same three-dimensional knitted fabric in horizontal and vertical rows without forming seams, and the transition tissues are typically used for fabric tissues with signific...
of 293