Skip to Content

1,103 Results Found

  • Article
  • Open Access
11 Citations
3,731 Views
16 Pages

Effect of Fibres on the Failure Mechanism of Composite Tubes under Low-Velocity Impact

  • Jie Xiao,
  • Han Shi,
  • Lei Tao,
  • Liangliang Qi and ,
  • Wei Min,
  • Hui Zhang,
  • Muhuo Yu and
  • Zeyu Sun
  • + 3 authors+ 0 author

17 September 2020

Filament-wound composite tubular structures are frequently used in transmission systems, pressure vessels, and sports equipment. In this study, the failure mechanism of composite tubes reinforced with different fibres under low-velocity impact (LVI)...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
14 Citations
3,704 Views
18 Pages

Mechanical Behavior of Foam-Filled Bamboo Composite Tubes under Axial Compression

  • Yang Wei,
  • Shuaifeng Tang,
  • Si Chen,
  • Qiudong Wang and
  • Jiaqing Wang

13 May 2022

In this paper, a new type of polyurethane foam-filled bamboo composite tube is proposed. Axial compression tests were carried out on unfilled and polyurethane foam-filled bamboo composite tubes. The effects of the foam filler, diameter (50 and 100 mm...

  • Article
  • Open Access
10 Citations
4,427 Views
15 Pages

21 December 2022

Currently, FRP composite tubes are drawing increasing attention in many industrial applications, due to their excellent mechanical and lightweight properties, with reduced energy consumption and enhanced sustainability. This study investigates the fa...

(This article belongs to the Special Issue Advanced Composites and Sustainability)
  • Article
  • Open Access
5 Citations
7,017 Views
23 Pages

21 October 2024

The heat transfer surfaces of heat exchangers are usually made of metals which may suffer from severe corrosion. When corrosive fluids are present, highly corrosion-resistant metals, graphite or ceramics are used, resulting in high costs. This study...

(This article belongs to the Special Issue Innovations in Heat Exchangers)
  • Article
  • Open Access
23 Citations
4,219 Views
15 Pages

Crashworthiness Assessment of Carbon/Glass Epoxy Hybrid Composite Tubes Subjected to Axial Loads

  • Ali Farokhi Nejad,
  • Seyed Saeid Rahimian Koloor,
  • Mohd Luqman Hakim Arifin,
  • Ali Shafiei and ,
  • Shukur Abu Hassan and
  • Mohd Yazid Yahya
  • + 1 author+ 0 author

29 September 2022

The crashworthiness of composite tubes is widely examined for various types of FRP composites. However, the use of hybrid composites potentially enhances the material characteristics under impact loading. In this regard, this study used a combination...

(This article belongs to the Collection Mechanics of Polymer Composites)
  • Article
  • Open Access
28 Citations
8,200 Views
13 Pages

27 November 2017

A tubular composite structure that is built of two materials, characterized by different Young moduli, is analysed in this paper. The Young’s modulus of one of these materials can be controlled by external conditions e.g., magnetic or electric field,...

(This article belongs to the Special Issue Auxetic Materials 2017-2018)
  • Article
  • Open Access
9 Citations
2,241 Views
19 Pages

24 September 2023

This study presents a novel shock absorber with an inward-inverting composite foam-filled tube. Under the compression of a pressing cap and the action of an internal inversion cap, the composite tube inverted inward. During the crushing, the fronds o...

(This article belongs to the Special Issue Mechanical Performance of Advanced Composite Materials and Structures)
  • Article
  • Open Access
21 Citations
4,310 Views
15 Pages

Chiral-Lattice-Filled Composite Tubes under Uniaxial and Lateral Quasi-Static Load: Experimental Studies

  • Kadir Gunaydin,
  • Aykut Tamer,
  • Halit Suleyman Turkmen,
  • Giuseppe Sala and
  • Antonio Mattia Grande

21 April 2021

Our research investigated the energy absorption characteristics of chiral auxetic lattices filled cylindrical composite tubes subjected to a uniaxial and lateral quasi-static load. The lattice structures were manufactured using a 3D printing techniqu...

(This article belongs to the Special Issue Advanced Materials and Technologies for Aerospace Applications)
  • Article
  • Open Access
8 Citations
4,281 Views
13 Pages

29 January 2022

The ductile behaviour of composite beams reinforced with glass fibre-reinforced polymer (GFRP) pultruded rectangular tubes was investigated in this paper. The composite beams were reinforced with GFRP tubes and different steel products, aiming to imp...

(This article belongs to the Special Issue Mechanical Properties of Fiber Reinforced Polymer Composites)
  • Article
  • Open Access
4 Citations
4,997 Views
11 Pages

31 March 2017

The present work introduces a novel extrusion with filler material to produce the high-performance TiBw/Ti-6Al-4V composite tube with a quasi-continuous reinforced structure. A simulation was adopted to study the effect of the filler material on the...

  • Article
  • Open Access
3 Citations
3,161 Views
13 Pages

Behaviour of Rectangular Hollow Thin Ply Carbon Thermoset and Thermoplastic Composite Tubes Subjected to Bending

  • Somen K. Bhudolia,
  • Goram Gohel,
  • Durga Vasudevan,
  • Kah Fai Leong and
  • Pierre Gerard

29 March 2022

Tubular composites are widely used in many industrial applications, and there is need to use new material and reliable manufacturing processes to improve the performance and process aspects. The current research presents a detailed study to understan...

(This article belongs to the Special Issue Advanced Thermoplastic Polymers and Composites)
  • Article
  • Open Access
12 Citations
4,238 Views
24 Pages

Acoustic Emission-Based Analysis of Damage Mechanisms in Filament Wound Fiber Reinforced Composite Tubes

  • Parsa Ghahremani,
  • Mehdi Ahmadi Najafabadi,
  • Sajad Alimirzaei and
  • Mohammad Fotouhi

7 August 2023

This study investigates the mechanical behavior and damage mechanisms of thin-walled glass/epoxy filament wound tubes under quasi-static lateral loads. The novelty is that the tubes are reinforced in critical areas using strip composite patches to pr...

(This article belongs to the Special Issue Smart Sensing in Structural Health Monitoring of Advanced Composite Structures)
  • Article
  • Open Access
2 Citations
1,499 Views
17 Pages

Concentric Compressive Behavior and Design of Stainless Steel–Concrete Double-Skin Composite Tubes Influenced by Dual Hydraulic Pressures

  • Jian-Tao Wang,
  • Yang Yang,
  • Kai-Lin Yang,
  • Deng-Long Hu and ,
  • Long-Bo Xu and
  • Jun-Xin Li
  • + 1 author+ 0 author

23 November 2024

The external hydraulic pressure and internal medium pressure acting on submarine pipelines can lead to the coupling effect of active and passive constraints on the mechanical performance of steel–concrete double-skin composite tubes, resulting...

(This article belongs to the Special Issue Analysis and Design of Marine Structures)
  • Article
  • Open Access
29 Citations
4,873 Views
11 Pages

5 September 2020

The exposure of polymeric composites to thermal loading is a ubiquitous problem that leads to the degradation of mechanical properties, reducing the service life of an engineered structure, and potentially premature, catastrophic modes of failure. In...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
3 Citations
1,957 Views
20 Pages

Bearing Capacity and Reinforced Measures of Bolted Joints for Pultruded Composite Square Tubes

  • Juan Han,
  • Xinchen Zhang,
  • Zhitian Xie,
  • Hai Fang and ,
  • Youjun Qi and
  • Wei Song
  • + 1 author+ 0 author

20 June 2025

This study investigates the tensile behavior of pultruded composite square tubes with single- and double-bolt joints to evaluate their ultimate load-bearing capacity and failure modes. A series of experiments was carried out to examine the effects of...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
528 Views
22 Pages

13 July 2026

In this study, the effect of stacking sequence on the mechanical behavior and damage evolution of carbon- and glass-fiber-reinforced hybrid composite tubes manufactured by the filament winding method was experimentally investigated. The tubes were pr...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
2 Citations
807 Views
18 Pages

Preparation of Ni-Based Composite Coatings on the Inner Surfaces of Tubes via Cylindrical Electro-Spark Powder Deposition

  • Hang Zhao,
  • Gaowei Yu,
  • Xinwen Guo,
  • Fei Luo and ,
  • Fengbo Zhu and
  • Yaohu Lei
  • + 1 author+ 0 author

4 December 2025

To address the challenge of fabricating metal-based composite coatings on the inner surfaces of tubular and internal hole components, a novel cylindrical electro-spark powder deposition (CEPD) technique is introduced. Utilizing the CEPD process, Ni-b...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
3 Citations
903 Views
19 Pages

4 June 2026

This study investigates the effects of filament winding parameters (tension and mosaic pattern) on the mechanical performance of thin-walled fiber-reinforced polymer composite tubes under internal pressure. The pressure was generated through axial co...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
57 Citations
4,881 Views
16 Pages

Damage Analysis of Composite CFRP Tubes Using Acoustic Emission Monitoring and Pattern Recognition Approach

  • Michal Šofer,
  • Jakub Cienciala,
  • Martin Fusek,
  • Pavel Pavlíček and
  • Richard Moravec

7 February 2021

The acoustic emission method has been adopted for detection of damage mechanisms in carbon-fiber-reinforced polymer composite tubes during the three-point bending test. The damage evolution process of the individual samples has been monitored using t...

(This article belongs to the Special Issue Selected Papers from Experimental Stress Analysis 2020)
  • Article
  • Open Access
1 Citations
1,066 Views
22 Pages

18 February 2026

Carbon fiber-reinforced plastics (CFRP) are widely used in deployable space structures due to their strength-to-weight ratio, yet their inherent brittleness and limited damage tolerance constrain their performance under large deformation. This study...

(This article belongs to the Section Materials Engineering)
  • Article
  • Open Access
174 Views
16 Pages

Tensile Behavior of Pre-Embedded Titanium-Alloy Joints in Filament-Wound Carbon-Fiber Composite Tubes After Low-Temperature Conditioning

  • Xiaoyong Liu,
  • Zifei Ma,
  • Siyuan Li,
  • Cheng Guo and ,
  • Haibo Luo and
  • Jun Wu
  • + 1 author+ 0 author

27 October 2026

Pre-embedded metal inserts provide a direct load-introduction path for filament-wound composite tubes without cutting the load-carrying fibers. This study evaluates the room-temperature axial tensile response of T700 carbon-fiber/TDE86 epoxy tubes co...

(This article belongs to the Special Issue Advances in the Experimentation and Numerical Modeling of Material Joining Processes (Third Edition))
  • Article
  • Open Access
1,121 Views
17 Pages

11 May 2025

This study developed a high-performance composite mortar with a low water-to-binder (W/B) ratio to improve the mechanical strength and volumetric stability of preplaced aggregate concrete-filled steel tubes (PACFST). Silica fume was incorporated to o...

(This article belongs to the Section Construction and Building Materials)
  • Abstract
  • Open Access
1,514 Views
4 Pages

The Welding of Two-Layer (Composite) Tubes with the Use of Laser Technology

  • Michał Urbańczyk,
  • Radosław Ciokan,
  • Janusz Adamiec and
  • Santina Topolska

Welding technologies are the most popular technologies used in the joining of steels [...]

(This article belongs to the Proceedings of The 31st International Conference on Modern Metallurgy Iron and Steelmaking 2024)
  • Article
  • Open Access
4 Citations
2,567 Views
11 Pages

16 November 2022

Research on different prefabricated cementitious composites for constructing composite concrete columns is comparatively more limited than that of concrete filled steel tube columns. The main objective of this study was to observe the axial compressi...

(This article belongs to the Special Issue Repair and Strengthening of Existing Reinforced Concrete Structures)
  • Article
  • Open Access
7 Citations
3,439 Views
13 Pages

Study of Copper/Aluminum Bimetallic Tube Rotary Ring Spinning Composite Forming Characteristics

  • Chen Wang,
  • Binkai Zhang,
  • Dongfang Yao,
  • Zhuangzhuang Tian and
  • Chunjiang Zhao

9 April 2023

As a plastic forming process developed based on rotary wheel spinning technology, the rotary ring spinning process has the excellent characteristics of high forming accuracy and high material utilization rate, and has been gradually applied to the ma...

(This article belongs to the Topic Advanced Forming Technology of Metallic Materials)
  • Article
  • Open Access
3 Citations
1,850 Views
11 Pages

Production and Remanufacturing of Vitrimer Matrix Composite Tubes

  • Alison Kennedy,
  • Carineh Ghafafian and
  • Steven Nutt

Composite tubes were filament-wound and cured using a vitrimer epoxy resin and carbon fiber (CF). The matrix was dissolved under mild conditions, and recovered continuous fiber tows were used to rewind a second-generation tube. Property retention and...

(This article belongs to the Section Composites Applications)
  • Article
  • Open Access
1 Citations
601 Views
17 Pages

22 May 2026

Addressing issues such as corrosion and the eccentric wear of metal tubing strings, low heating efficiency, and high operation and maintenance costs of lifting systems in heavy-oil extraction, core equipment comprising carbon-fiber-reinforced PEEK (P...

(This article belongs to the Special Issue Thermal Fluid Systems in Mechanical Engineering)
  • Article
  • Open Access
8 Citations
3,491 Views
18 Pages

23 July 2021

A composite concrete-filled glass fiber reinforced polymer (GFRP) tube square column is a new type of composite column, where GFRP is externally wrapped over several GFRP square tubes to form a multicavity GFRP tube, and then concrete is poured insid...

(This article belongs to the Special Issue Numerical Modeling and Mechanical Properties Analysis for Building Materials)
  • Article
  • Open Access
4 Citations
7,102 Views
14 Pages

2 December 2024

In order to promote the development of bridge assembly technology and accelerate the application of rectangular steel-tube–concrete composite truss bridges, this study focuses on the Yellow River Diversion Jiqing Main Canal Bridge as the engine...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
4 Citations
2,467 Views
13 Pages

Modeling for the Fabrication Process of a ϕ1185 mm C/C Composite Thermal Insulation Tube in an Isothermal Chemical Vapor Infiltration Reactor

  • Jicheng Zhou,
  • Jianyong Zhan,
  • Huiling Liang,
  • Yan Guo and ,
  • Baoxing Zhao,
  • Linzhao Hao,
  • Tong Zhang and
  • Bingchun Jiang
  • + 3 authors+ 0 author

14 June 2024

The large-size chemical vapor infiltration (CVI) of the carbon/carbon (C/C) composite thermal insulation tube is a key component for drawing large diameter monocrystalline silicon rods. However, the CVI densification process is complex, and the cost...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
10 Citations
3,868 Views
26 Pages

22 October 2021

A new structure termed “concrete-filled FRP-grooved steel composite tube (CFGCT) column” is proposed, which is composed of a stress-released steel tube (i.e., grooved steel tube), fiber-reinforced polymer (FRP) and concrete. Axial load tests were car...

  • Article
  • Open Access
5 Citations
2,339 Views
17 Pages

Axial Tensile Adhesively Bonded Performance of Carbon Fiber Composite Tubes Under Room-Temperature and Low-Temperature Circulation

  • Haibo Luo,
  • Qian Wang,
  • Yanchu Yang,
  • Tao Li and ,
  • Jun Wu,
  • Wentao Gong,
  • Hui Feng and
  • Xiaohui He
  • + 3 authors+ 0 author

2 March 2025

This study investigated the axial tensile performance of adhesively bonded T700/C204 carbon fiber composite and TC4 titanium alloy tubular single-lap joints under three distinct temperature conditions: room temperature, low temperature (−65 °C), and...

(This article belongs to the Special Issue Advances in the Experimentation and Numerical Modeling of Material Joining Processes (Second Edition))
  • Article
  • Open Access
7 Citations
4,440 Views
15 Pages

30 June 2020

In recent decades, thin-walled composite components have been widely used in the automotive industry due to their high specific energy absorption. A large number of experimental and numerical studies have been conducted to characterize the energy abs...

  • Article
  • Open Access
1 Citations
2,368 Views
21 Pages

23 April 2024

In recent years, with the development of building technology, the Chinese construction industry has begun to gradually promote the prefabricated buildings to save on construction costs. Among them, composite slabs, as essential components of prefabri...

(This article belongs to the Topic Resilient Civil Infrastructure)
  • Article
  • Open Access
5 Citations
3,459 Views
17 Pages

Flexural Behavior of Concrete-Filled Steel Tube Beams Composite with Concrete Slab Deck

  • Salam Maytham AlObaidi,
  • Mohammed Abbas Mousa,
  • Aqil M. Almusawi,
  • Muhaned A. Shallal and
  • Saif Alzabeebee

Concrete-filled steel tube (CFST) beams have shown their flexural effectiveness in terms of stiffness, strength, and ductility. On the other hand, composite bridge girders demand durable and ductile girders to serve as tension members, while the conc...

(This article belongs to the Special Issue Advances in Steel and Composite Steel–Concrete Bridges and Buildings)
  • Article
  • Open Access
4 Citations
2,541 Views
21 Pages

Axial Compression Performance Test and Bearing Capacity Calculation Method of Square Steel Tube–Timber–Concrete Composite L-Shaped Columns

  • Weisu Weng,
  • Haonan Lv,
  • Bo Liu,
  • Minli Zhang and ,
  • Ziteng Jing,
  • Jianghao Hu and
  • Shuqian Hu
  • + 2 authors+ 0 author

17 December 2024

The square steel tube–timber–concrete composite L-shaped columns are lighter in weight due to the inclusion of wood and exhibit superior seismic performance. This combination not only reduces transportation and labor costs but also enhanc...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
3 Citations
1,375 Views
23 Pages

Numerical Evaluation of Embedded I-Section Strengthening in Axially Loaded Composite Concrete-Filled Stainless Steel Tubes

  • Murtadha Noori Sadeq,
  • Hussein Kareem Mohammad,
  • Abbas A. Allawi,
  • Ahmed W. Al Zand and ,
  • Mohammed Riyadh Khalaf,
  • Ali Hussain Ali Al-Ahmed,
  • Teghreed Hassan Ibrahim and
  • Ayman El-Zohairy
  • + 3 authors+ 0 author

2 September 2025

To enhance the structural performance of concrete-filled steel tube (CFST) columns, various strengthening techniques have been proposed, including the use of internal steel stiffeners, external wrapping with carbon fiber-reinforced polymer (CFRP) she...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
7 Citations
3,354 Views
26 Pages

Hysteretic Behavior on Asymmetrical Composite Joints with Concrete-Filled Steel Tube Columns and Unequal High Steel Beams

  • Jing Ji,
  • Wen Zeng,
  • Liangqin Jiang,
  • Wen Bai and ,
  • Hongguo Ren,
  • Qingru Chai,
  • Lei Zhang,
  • Hongtao Wang,
  • Yunhao Li and
  • Lingjie He
  • + 5 authors+ 0 author

10 December 2021

In order to acquire the hysteretic behavior of the asymmetrical composite joints with concrete-filled steel tube (CFST) columns and unequal high steel beams, 36 full-scale composite joints were designed, and the CFST hoop coefficient (ξ), axial co...

(This article belongs to the Special Issue Symmetry in Applied Mechanics Analysis on Smart Optical Fiber Sensors)
  • Article
  • Open Access
1 Citations
2,101 Views
16 Pages

26 September 2023

A novel composite floor consisting of an upper chord of a grouted square steel tube truss and a lower chord of a reinforced concrete slab is proposed to address existing problems with precast composite floors, such as a complex construction process,...

(This article belongs to the Special Issue Research on Reinforced Concrete Buildings Structural Analysis and Durability Assessment)
  • Article
  • Open Access
2 Citations
2,955 Views
14 Pages

Effect of Ce Content on Properties of Al-Ce-Based Composites by Powder-in-Tube Method

  • Mairym Vázquez,
  • Oscar Marcelo Suárez,
  • Michael Thompson,
  • Haneul Jang and ,
  • Na Gong,
  • David Weiss and
  • Orlando Rios
  • + 2 authors+ 0 author

25 September 2021

Al-Ce based alloys have gained recent interest and have proven to have excellent strength without heat treatment and high thermal stability. Challenges with the production of Al-Ce samples from elemental powders arise due to the elemental material be...

(This article belongs to the Special Issue Particulate Aluminum Matrix Composites: From Fundamentals to Applications)
  • Article
  • Open Access
4 Citations
1,607 Views
13 Pages

Evaluation of the Quality and Educational Value of YouTube Videos on Class IV Resin Composite Restorations

  • Rashed A. AlSahafi,
  • Hesham A. Alhazmi,
  • Israa Alkhalifah,
  • Danah Albuhmdouh and ,
  • Malik J. Farraj,
  • Abdullah Alhussein and
  • Abdulrahman A. Balhaddad
  • + 2 authors+ 0 author

30 June 2025

Objectives: The increasing reliance on online platforms for dental education necessitates an assessment of the quality and reliability of available resources. This study aimed to evaluate YouTube videos as educational tools for Class IV resin composi...

(This article belongs to the Special Issue Dental Education: Innovation and Challenge)
  • Article
  • Open Access
3 Citations
1,625 Views
24 Pages

25 March 2025

The effects of adding circumferential groove geometries on the collapse capacity of carbon composite cylindrical tubes were investigated experimentally and numerically. Tubular specimens, both with and without grooves, were imploded hydrostatically i...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers (2nd Edition))
  • Article
  • Open Access
1 Citations
1,292 Views
24 Pages

Crashworthiness Optimization of Composite/Metal Hybrid Tubes with Triggering Holes

  • Yan Ma,
  • Zehui Huang,
  • Hongbin Tang,
  • Jianjiao Deng and ,
  • Jingchun Wang,
  • Shibin Wang,
  • Zhiguo Zhang and
  • Zhenjiang Wu
  • + 3 authors+ 0 author

10 April 2026

Due to high specific energy absorption, composite/metal hybrid multi-cell thin-walled tubes hold significant potential in the field of automotive passive safety. However, the material coupling effect enhancing SEA often elevated the initial peak crus...

(This article belongs to the Section Vehicle Engineering Design)
  • Article
  • Open Access
335 Views
17 Pages

Experimental Investigation of Hotspot Stress Characteristics of Joints in Rectangular Concrete-Filled Steel Tube Composite Truss Girders

  • Liyong Gao,
  • Yi Shi,
  • Peiyuan Liu,
  • Changhao Hu and ,
  • Changjing Xu,
  • Xuanyu Zhang and
  • Lei Jiang
  • + 2 authors+ 0 author

19 August 2026

This study investigates the hotspot stress concentration characteristics of rectangular concrete-filled steel tube (CFST) truss joints under bridge deck composite action. Two truss specimens, with and without a reinforced concrete deck, were tested u...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2,215 Views
27 Pages

Seismic Behavior of Composite Columns with High-Strength Concrete-Filled Steel Tube Flanges and Honeycomb Steel Webs Subjected to Freeze-Thaw Cycles

  • Jing Ji,
  • Hengfei Yang,
  • Liangqin Jiang,
  • Chaoqing Yuan and ,
  • Yingchun Liu,
  • Yu Zhang,
  • Xiaomeng Hou,
  • Zhanbin Zhang and
  • Xuan Chu
  • + 4 authors+ 0 author

26 August 2024

To investigate the seismic behavior of composite columns with high-strength concrete-filled steel tube flanges and honeycomb steel webs (STHHC) after being subjected to freeze-thaw cycles, 36 full-scale STHHCs were designed with the following main pa...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
11 Citations
2,884 Views
17 Pages

1 May 2020

The paper presents experimental studies on axially compressed columns made of concrete-filled glass fiber reinforced polymer (GFRP) tubes. The infill concrete was C30/37 according to Eurocode 2. The investigated composite pipes were characterized by...

(This article belongs to the Special Issue Research of Structure and Properties of Concretes Based on Non-conventional Aggregates)
  • Article
  • Open Access
20 Citations
2,719 Views
15 Pages

Low Velocity Impact Monitoring of Composite Tubes Based on FBG Sensors

  • Shengsheng Huan,
  • Linjiao Lu,
  • Tao Shen and
  • Jianke Du

17 February 2024

Carbon fiber reinforced composites (CFRP) are susceptible to hidden damage from low velocity external impacts during their service life. To ensure the proper monitoring of the state of the composites, it is crucial to predict the location of an impac...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
436 Views
22 Pages

22 September 2026

Hybrid composites offer an alternative because the costs of carbon fiber reinforcements are high and the mechanical features of glass and basalt fiber reinforcements are lower than carbon fibers. It is of great importance to use hybrid fiber-reinforc...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
3 Citations
1,270 Views
17 Pages

5 December 2025

This study investigates the quasi-static axial crushing behaviour of carbon fibre-reinforced polymer (CFRP) tubes with variations incorporating polyurethane foam (PU) and aluminium tubes. Six different composite configurations were fabricated, includ...

(This article belongs to the Section Carbon Composites)
  • Article
  • Open Access
2 Citations
3,284 Views
20 Pages

31 December 2023

To estimate the progressive collapse resistance capacity of a multi-column frame tube structure with an assembled truss beam composite floor (ATBCF), pushdown analysis and nonlinear dynamic analysis are conducted for such a structure using the altern...

(This article belongs to the Section Building Structures)

of 23