Resistance spot welding was performed to join 2 mm thick TA2 titanium plate and Q235 steel plate using an Nb-Ni bi-interlayer. The microstructure of the interfacial zone was observed and analyzed, and the tensile shear load of the joint was evaluated...
To deposit well-adhered diamond coating, gradient-modified hafnium carbide-silicon carbide (HfC-SiC) mixed bi-interlayers were prepared on cemented carbides (WC-Co) by plasma surface metallurgy technique under the different tetramethylsiline (TMS) fl...
To enhance the performance of Babbitt–steel bimetallic composites, bismuth (Bi) was incorporated into the Tin (Sn)-interlayer. Babbitt–steel bimetallic composites were created using the liquid–solid compound casting method in this s...
Taking Bismuth Titanate (Bi4Ti3O12) as a Aurivillius-type compound with m = 3 for example, the ion (W6+/Cr3+) doping effect on the lattice distortion and interlayer mismatch of Bi4Ti3O12 structure were investigated by stress analysis, based on an ela...
Alumina ceramics were joined by a transient liquid phase (TLP) bonding method at relatively lower temperatures, using mixed powders of Bi2O3 and ZnO with different weight ratios as interlayers between the ceramic components. Bonding was achieved at 7...
The intermetallic compounds formed during the diffusion soldering of a Bi2Te2.55Se0.45 thermoelectric material with a Cu electrode are investigated. For this bonding process, Bi2Te2.55Se0.45 was pre-coated with a 1 μm Sn thin film on the thermoelectr...
The search for novel solar cell designs as an alternative to standard silicon solar cells is important for the future of renewable energy production. One such alternative design is the carbon nanotube/silicon (CNT/Si) heterojunction solar device. In...
This study investigated the electro-optic properties of organic light-emitting diode (OLED) devices with the addition of an interlayer. A device with the perfluorododecyl-1H,1H,2H,2H-triethoxysilane–perfluorotetradecyl 1H,1H,2H,2H-triethoxysila...
Understanding the physical and chemical processes at the interfaces of metals and topological insulators is crucial for the development of the next generation of topological quantum devices. Here, we report the discovery of robust superconductivity i...
BiFeO3/BaTiO3 bi-layer thick films (~1 μm) were deposited on Pt/Ti/SiO2/(100) Si substrates with LaNiO3 buffer layers at 500 °C via a rf magnetron sputtering process. X-ray diffraction (XRD) analysis revealed that both BiFeO3 and BaTiO3 layers have a...
Organic pollutants in industrial wastewater present a severe threat to both the environment and human health. Photocatalytic technology, recognized for its eco-friendliness and high efficiency, has become a leading approach for degrading such polluta...
Bismuth oxyhalide, usually employed as a photocatalyst, has not been tested as an activator of peroxide for water purification. This work explores the potential application of bismuth oxyhalide (BiOX, X = Cl, Br, I)-activated peroxide (H2O2; peroxymo...
Twisted bi-layer graphene (tBLG) has attracted much attention because of its unique band structure and properties. The properties of tBLG vary with small differences in the interlayer twist angle, but it is difficult to accurately adjust the interlay...
This review focuses on intra- and interlayer (IL) electron-phonon interactions and phonon self-energy renormalizations in twisted and AB-stacked bilayer graphene (2LG) composed either only of 12C or a mixing of 12C and 13C isotopes. A simple way to i...
BiOXxY1−x (X, Y = Cl, Br, and I) solid solutions have been regarded as promising photocatalysts attributed to their unique layered structure, tunable band structure, and chemical and optical stability. In this study, BiOBrxI1−x nanoplate solid soluti...
In this study, we investigated the temperature dependencies of the total, crystal lattice, and electronic thermal conductivities in films of topological insulators p–Bi0.5Sb1.5Te3 and p–Bi2Te3 formed by discrete and thermal evaporation me...
Hydrotalcite/bismuth solid solution (2D/2D CoAl-LDH/BiO(OH)XI1−X) heterojunction photocatalysts were fabricated through a hydrothermal route. Because of their identical layered structure and interlayer hydroxides, CoAl-LDH(2D) and BiO(OH)XI1&mi...
The rheology control of water-based drilling fluids at ultra-high temperatures has been one of the major challenges in deep or ultra-deep resource exploration. In this paper, the effects of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonimide)...
A series of (MS)1+x(TiS2)2 (M = Pb, Bi, Sn) misfit layer compounds are proposed as bulk thermoelectric materials. They are composed of alternating rock-salt-type MS layers and paired trigonal anti-prismatic TiS2 layers with a van der Waals gap. This...
Selected van der Waals magnets retain magnetic order down to the monolayer limit. Their sensitivity to layer number, local bonding, carrier density, and interfaces provides routes to magnetic control for spintronic and quantum devices. In this review...
This study examined glass-based organic electroluminescence in the presence of a cyclodextrin polymer as an interlayer. Glass-based organic electroluminescence was achieved by the deposition of five layers of N,N’-Bis(3-methylphenyl)N,N’-bis(phenyl)-...
An innovative bilayer cathode interlayer (CIL) with a nanostructure consisting of in situ thermal reduced graphene oxide (ITR-GO) and poly[(9,9-bis(3′-(N,N-dimethylamion)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl) fluorene] (PFN) has been fabricated...
As the miniaturization of electronic appliances and microprocessors progresses, low-permittivity interlayer materials are becoming increasingly important for their suppression of electronic crosstalk, signal propagation delay and loss, and so forth....
A series of Mg-Al LDH-based photocatalysts were synthesized via a one-pot steam-assisted method, including pure Mg-Al LDH (MA), Zn-In ion-exchange-modified Mg-Al LDH (MAZ), BiOCl-loaded pristine Mg-Al LDH (MAB), and Zn-In-modified Mg-Al LDH co-loaded...
MnSb2Te4 has a similar structure to an emerging material, MnBi2Te4. According to earlier theoretical studies, the formation energy of Mn antisite defects in MnSb2Te4 is negative, suggesting its inherent instability. This is clearly in contrast to the...
Floor heave is a typical tunnel issue in tunnelling engineering. To gain deep insights into the deformation mechanism and failure processes of floor heave at the bottom of a tunnel in layered rock, biaxial step-loading tests were conducted on rock sa...
Complex sulfides of thallium with As, Sb, or Bi and with other cations (‘thallium sulfosalts’) are a large group of crystal structures with extreme variability. Incorporation of the large Tl+ cation in them is solved in several different ways: housin...
A sustainable circular pathway was developed for poly(ethylene terephthalate) (PET) nanocomposites through a catalyst-driven polymerization and depolymerization process. In this study, calcium dodecylbenzene sulfonate with n-butyl alcohol modified Zn...
Bilayer graphene exhibits intriguing physical and mechanical properties that are suitable for advanced electronic device applications. By introducing a new degree of freedom through interlayer twisting, exotic phenomena such as superconductivity can...
Metasurfaces have shown great potential in achieving low-cost and low-complexity signal enhancement and redirection. Due to the low transmission power and high attenuation issues of current high-frequency communication technology, it is necessary to...
Two-dimensional materials have emerged as core components for next-generation optoelectronic devices due to their quantum confinement effects and tunable electronic properties. Indium selenide (InSe) demonstrates breakthrough photoelectric performanc...
The development of heavy oil reservoirs in China is of great significance to safeguard national energy security, but great challenges are faced due to the complex and heterogeneous reservoir properties. Inter-well connectivity analysis is critical to...
Aqueous CdTe quantum dots solar cells have been successfully fabricated by the blade coating method on the magnesium zinc oxide (Zn1−xMgxO or ZMO) window layer. Compared with the ZMO mono-window layer, the ZMO/CdS bi-window layer can decrease t...
Based on solvothermal synthesis, self-assembly of the heptadentate 2,6-diacetylpyridine bis(nicotinoylhydrazone) Schiff base ligand (H2L) and Zn(II) and/or Cd(II) salts has led to the formation of three homometallic [CdL]n (1), {[CdL]∙0.5dmf∙H2O}n (2...
Immunosorbent turnip vein clearing virus (TVCV) particles displaying the IgG-binding domains D and E of Staphylococcus aureus protein A (PA) on every coat protein (CP) subunit (TVCVPA) were purified from plants via optimized and new protocols. The la...
Polyvinyl butyral (PVB) is a specialty polymer primarily used as an interlayer in laminated glass applications with no current circularity plan after the end of its life. This study presents a comprehensive recycling strategy for postconsumed PVB was...
Hydrotalcite exhibits the capability to adsorb CO2 at elevated temperatures. High surface area and favorable coating properties are essential to harness its potential for practical applications. Stable alcohol-based dispersions are needed for thin fi...
This study proposes fabric composites with improved static and dynamic puncture via increasing a friction force to restrain the slide of filaments as well as the compression and abrasion between the fibers and the puncture probe. The the bi-layered s...
A new approach to acid activation of raw Ca-bentonite was explored. The method consisted in dehydration of clay by thermal pretreatment at 200 °C, followed by immediate impregnation with H2SO4 solution. The acid concentration was 1.5 × or 2...
In low-light environments, the presence of numerous small, dense, and occluded objects challenges the effectiveness of conventional object detection methods, failing to achieve desirable results. To address this, this paper proposes an efficient obje...
As a fission product of 235U or 239Pu, 90Sr is a β-emitting radionuclide with a relatively long half-life (t1/2 = 28.9 years). Due to its high solubility, easy environmental mobility, and propensity for bioaccumulation within the food chain, the...
The present research reports on the development of bi- and multilayer polylactide (PLA) films by the incorporation of electrospun nanostructured PLA coatings and interlayers containing the antioxidant gallic acid (GA) at 40 wt% onto cast-extruded PLA...
In this study, a high-Tg aerospace-grade epoxy composite plate was co-curing welded using a unidirectional PEEK thermoplastic carbon fibre tape to develop advanced composite joints. To account for the surface roughness and the weldability of carbon&n...
Fe-based metallo-supramolecular polymer (polyFe), composed of Fe(II) ions and bis(terpyridyl)benzene, is known as a good electrochromic (EC) material. For the first time, to improve the EC properties, we prepared nanocomposites comprising polyFe and...
The tight sandstone reservoirs of the Tarim Basin in China are characterized by vertically stacked multi-sweet spots. However, the strong vertical heterogeneity and discontinuity limit the effectiveness of hydraulic fracturing for multilayered co-pro...
The No. VI ore block of the Galinge skarn system in the Qimantagh metallogenic belt, East Kunlun, contains proximal Fe-oxide mineralization and distal Pb–Zn sulfide mineralization that are spatially zoned and locally overprinted along faults an...
Despite considerable progress, high-performing durable catalysts operating under large current densities (i.e., >1000 mA/cm2) are still lacking. To discover platinum group metal-free (PGM-free) electrocatalysts for sustainable energy, our research...