Skip to Content
You are currently on the new version of our website. Access the old version .

204 Results Found

  • Article
  • Open Access
28 Citations
4,801 Views
18 Pages

Tribological Behaviors of Super-Hard TiAlN Coatings Deposited by Filtered Cathode Vacuum Arc Deposition

  • Zhiqiang Zhang,
  • Lan Zhang,
  • Heng Yuan,
  • Menglin Qiu and ,
  • Xu Zhang,
  • Bin Liao,
  • Fengshou Zhang and
  • Xiaoping Ouyang
  • + 3 authors+ 0 author

17 March 2022

High hardness improves the material’s load-bearing capacity, resulting in the enhancement of tribological properties. However, the high hardness is difficult to achieve for TiAlN coating due to the transformation of the close-packed structure f...

(This article belongs to the Topic Surface Engineered Materials)
  • Article
  • Open Access
15 Citations
6,113 Views
13 Pages

The Formation of Composite Ti-Al-N Coatings Using Filtered Vacuum Arc Deposition with Separate Cathodes

  • Ivan A. Shulepov,
  • Egor B. Kashkarov,
  • Igor B. Stepanov,
  • Maxim S. Syrtanov and ,
  • Alina N. Sutygina,
  • Ivan Shanenkov,
  • Aleksei Obrosov and
  • Sabine Weiß
  • + 3 authors+ 0 author

12 November 2017

Ti-Al-N coatings were deposited on high-speed steel substrates by filtered vacuum arc deposition (FVAD) during evaporation of aluminum and titanium cathodes. Distribution of elements, phase composition, and mechanical properties of Ti-Al-N coatings w...

  • Article
  • Open Access
20 Citations
4,931 Views
15 Pages

Properties of TiAlN Coatings Obtained by Dual-HiPIMS with Short Pulses

  • Alexander Grenadyorov,
  • Vladimir Oskirko,
  • Alexander Zakharov,
  • Konstantin Oskomov and ,
  • Sergey Rabotkin,
  • Vyacheslav Semenov,
  • Andrey Solovyev and
  • Alexander Shmakov
  • + 3 authors+ 0 author

5 February 2023

The paper focuses on the dual high-power impulse magnetron sputtering of TiAlN coatings using short pulses of high power delivered to the target. The surface morphology, elemental composition, phase composition, hardness, wear resistance, and adhesiv...

(This article belongs to the Special Issue Metallic and Ceramic Materials Integrity – Surface Engineering for Wear, Corrosion and Erosion Prevention)
  • Article
  • Open Access
40 Citations
6,426 Views
14 Pages

TiAlN has been widely used in cutting tool coating due to its excellent mechanical and thermal performances. However, the research on the TiAlN coating effect on cutting temperature is not comprehensive enough. In this paper, the friction tests at el...

  • Feature Paper
  • Article
  • Open Access
27 Citations
7,805 Views
12 Pages

Stress-Dependent Elasticity of TiAlN Coatings

  • Marcus Hans,
  • Lena Patterer,
  • Denis Music,
  • Damian M. Holzapfel and ,
  • Simon Evertz,
  • Volker Schnabel,
  • Bastian Stelzer,
  • Daniel Primetzhofer,
  • Bernhard Völker and
  • Jochen M. Schneider
  • + 10 authors+ 5 authors

2 January 2019

We investigate the effect of continuous vs. periodically interrupted plasma exposure during cathodic arc evaporation on the elastic modulus as well as the residual stress state of metastable cubic TiAlN coatings. Nanoindentation reveals that the elas...

(This article belongs to the Special Issue Design and Synthesis of Hard Coatings)
  • Article
  • Open Access
13 Citations
3,471 Views
13 Pages

Analysis of Microstructure and Properties of a Ti–AlN Composite Produced by Selective Laser Melting

  • Ryszard Sitek,
  • Maciej Szustecki,
  • Lukasz Zrodowski,
  • Bartlomiej Wysocki and ,
  • Jakub Jaroszewicz,
  • Paweł Wisniewski and
  • Jaroslaw Mizera
  • + 2 authors+ 0 author

12 May 2020

Selective Laser Melting (SLM) is a manufacturing technique that is currently used for the production of functional parts that are difficult to form by the traditional methods such as casting or CNC (Computer Numerical Control) cutting from a wide ran...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
23 Citations
13,984 Views
11 Pages

17 June 2009

A three-level six-factor (arc power, substrate temperature, pre-treatment bias voltage, working pressure, deposition bias voltage and pretreatment time) orthogonal experimental array (L18) to optimize the adhesion strength of arc ion plating (AIP) Ti...

  • Article
  • Open Access
42 Citations
6,589 Views
21 Pages

15 August 2019

In the metalworking industry, different processes and applications require the utilisation of custom designed tools. The selection of the appropriated substrate material and its pre-treatment as well as the protective coating are of great importance...

  • Feature Paper
  • Article
  • Open Access
10 Citations
3,857 Views
12 Pages

20 August 2021

TiAlN coatings with different Al ratios were deposited by the cathodic arc ion plating (AIP) method, and the relationship between solid particle erosion resistance and structural, mechanical properties was investigated by a micro slurry-jet erosion (...

(This article belongs to the Special Issue Hard Coatings for Surface Engineering Solutions)
  • Article
  • Open Access
6 Citations
2,993 Views
14 Pages

29 June 2021

The application of thin monolayers helps to increase the endurance of a cutting tool during the drilling process. One such trendy coating is TiAlN, which guarantees high wear resistance and helps to “smooth out” surface defects. For this reason, a ne...

(This article belongs to the Special Issue Novel Material and Technological Solutions in Foundry Engineering)
  • Feature Paper
  • Article
  • Open Access
3 Citations
1,181 Views
16 Pages

Effect of Liquid CO2 on Wear Behaviour of TiAlN Hard Coating at Elevated Temperatures

  • Matej Drobnič,
  • Aljaž Drnovšek,
  • Franci Pušavec and
  • Miha Čekada

PVD hard coatings improve the wear and frictional properties in metal cutting and, therefore, extend the lives of cutting tools. Cutting fluids, including the novel use of liquid carbon dioxide (LCO2), are crucial for reducing tool wear and enhancing...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Feature Paper
  • Article
  • Open Access
22 Citations
4,445 Views
22 Pages

22 January 2021

This paper reports the results of an investigation of the oxidation of a sputter-deposited TiAlN hard coating in air at temperatures of 800 and 850 °C for times ranging from 15 min to 2 h. The study is focused on the role of growth defects in the...

(This article belongs to the Special Issue Surface Topography Effects on Functional Properties of PVD Coatings)
  • Article
  • Open Access
16 Citations
6,497 Views
20 Pages

Thermal Shock and Oxidation Behavior of HiPIMS TiAlN Coatings Grown on Ti-48Al-2Cr-2Nb Intermetallic Alloy

  • Claudio Badini,
  • Silvia M. Deambrosis,
  • Elisa Padovano,
  • Monica Fabrizio and ,
  • Oxana Ostrovskaya,
  • Enrico Miorin,
  • Giuseppe C. D’Amico,
  • Francesco Montagner,
  • Sara Biamino and
  • Valentina Zin
  • + 5 authors+ 0 author

25 November 2016

A High Power Impulse Magnetron Sputtering (HiPIMS) method for depositing TiAlN environmental barrier coatings on the surface of Ti-48Al-2Cr-2Nb alloy was developed in view of their exploitation in turbine engines. Three differently engineered TiAlN f...

  • Article
  • Open Access
17 Citations
5,514 Views
13 Pages

Comparative Characterization of the TiN and TiAlN Coatings Deposited on a New WC-Co Tool Using a CAE-PVD Technique

  • Alecs Andrei Matei,
  • Ramona Nicoleta Turcu,
  • Ion Pencea,
  • Eugen Herghelegiu and ,
  • Mircea Ionut Petrescu and
  • Florentina Niculescu
  • + 1 author+ 0 author

7 January 2023

The main objective of this work was to assess and compare the structure and mechanical properties of the TiN and TiAlN coatings deposited on a new WC-Co tool using the cathodic arc evaporation vacuum deposition (CAE-PVD) technique. The cutting tool w...

(This article belongs to the Section Hybrid and Composite Crystalline Materials)
  • Article
  • Open Access
2 Citations
2,338 Views
22 Pages

29 September 2025

Beta (β)-type Ti-29Nb-13Ta-4.6Zr (TNTZ) alloys combine low modulus with biocompatibility but require improved surface properties for long-term implantation. This study aimed to enhance the surface mechanical strength and antibacterial performanc...

(This article belongs to the Special Issue Films and Coatings with Biomedical Applications)
  • Article
  • Open Access
65 Citations
7,450 Views
16 Pages

Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

  • Mirosław Szala,
  • Mariusz Walczak,
  • Kamil Pasierbiewicz and
  • Mariusz Kamiński

The resistance to cavitation erosion and sliding wear of stainless steel grade AISI 304 can be improved by using physical vapor deposited (PVD) coatings. The aim of this study was to investigate the cavitation erosion and sliding wear mechanisms of m...

(This article belongs to the Special Issue Selected Papers from the 1st Coatings and Interfaces Web Conference (CIWC-1))
  • Article
  • Open Access
19 Citations
3,541 Views
16 Pages

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

  • Jinfu Zhao,
  • Zhanqiang Liu,
  • Zipeng Gong,
  • Annan Liu and ,
  • Yukui Cai,
  • Bing Wang,
  • Qinghua Song,
  • Xiaoliang Liang,
  • Yanbin Zhang and
  • Haiyang Ji
  • + 6 authors+ 1 author

17 June 2023

TiAlN-coated carbide tools have been used to machine Ti-6Al-4V alloys in aviation workshops. However, the effect of TiAlN coating on surface morphology and tool wear in the processing of Ti-6Al-4V alloys under various cooling conditions has not been...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
30 Citations
9,036 Views
26 Pages

10 January 2019

We present a modified embedded atom method (MEAM) semi-empirical force-field model for the Ti1−xAlxN (0 ≤ x ≤ 1) alloy system. The MEAM parameters, determined via an adaptive simulated-annealing (ASA) minimization scheme, optimize the mod...

(This article belongs to the Special Issue Computational Design of Complex Structural Alloys)
  • Article
  • Open Access
17 Citations
4,010 Views
11 Pages

Synthesis and Characterization of a Nearly Single Bulk Ti2AlN MAX Phase Obtained from Ti/AlN Powder Mixture through Spark Plasma Sintering

  • Christopher Salvo,
  • Ernesto Chicardi,
  • Rosalía Poyato,
  • Cristina García-Garrido and ,
  • José Antonio Jiménez,
  • Cristina López-Pernía,
  • Pablo Tobosque and
  • Ramalinga Viswanathan Mangalaraja
  • + 3 authors+ 0 author

26 April 2021

MAX phases are an advanced class of ceramics based on ternary carbides or nitrides that combine some of the ceramic and metallic properties, which make them potential candidate materials for many engineering applications under severe conditions. The...

(This article belongs to the Special Issue Novel Ceramic Materials for the Energy Transition)
  • Article
  • Open Access
1 Citations
1,485 Views
15 Pages

Hot-Pressing of Ti-Al-N Multiphase Composite: Microstructure and Properties

  • Ryszard Sitek,
  • Kamil Bochenek,
  • Piotr Maj,
  • Michał Marczak and ,
  • Krzysztof Żaba,
  • Mateusz Kopec,
  • Grzegorz Piotr Kaczmarczyk and
  • Janusz Kamiński
  • + 3 authors+ 0 author

27 January 2025

This study focuses on the development and characterization of a bulk Ti-Al-N multiphase composite enriched with BN addition and sintered through hot pressing. The research aimed to create a material with optimized mechanical and corrosion-resistant p...

(This article belongs to the Special Issue Emerging Non-Destructive Testing Technologies: Advances and Applications)
  • Article
  • Open Access
9 Citations
2,879 Views
12 Pages

Milling of an Al/CFRP Sandwich Construction with Non-Coated and TiAlN-Coated Tools

  • Elżbieta Doluk,
  • Anna Rudawska,
  • Józef Kuczmaszewski and
  • Paweł Pieśko

26 August 2020

In this study, the effect of cutting parameters on the quality of an Al/CFRP sandwich structure (aluminium alloy–carbon fibre reinforced polymer) after milling with uncoated and TiAlN-coated tools was examined. The results of the cutting force...

  • Article
  • Open Access
7 Citations
3,021 Views
9 Pages

Microstructure and Mechanical Properties of TiN/Ti2AlN Multilayers

  • Donglin Ma,
  • Yao Liu,
  • Qiaoyuan Deng,
  • Yantao Li and
  • Yongxiang Leng

1 February 2023

Titanium nitride (TiN) thin films deposited by high-power pulsed magnetron sputtering usually have a high compressive residual stress, which is not conducive for the adherence of TiN thin films. This study investigated the potential of Ti2AlN for rel...

  • Article
  • Open Access
50 Citations
11,670 Views
10 Pages

XPS and AFM Investigations of Ti-Al-N Coatings Fabricated Using DC Magnetron Sputtering at Various Nitrogen Flow Rates and Deposition Temperatures

  • Aleksei Obrosov,
  • Roman Gulyaev,
  • Markus Ratzke,
  • Alex A. Volinsky and ,
  • Sebastian Bolz,
  • Muhammad Naveed and
  • Sabine Weiß
  • + 2 authors+ 0 author

10 February 2017

Ti-Al-N coatings were deposited by direct current magnetron sputtering (DCMS) onto IN 718 at different nitrogen flow rates and deposition temperatures. The coatings’ properties were characterized using atomic force microscopy (AFM), X-ray photoelectr...

  • Article
  • Open Access
5 Citations
3,117 Views
14 Pages

16 March 2022

A study is presented on the synthesis of reaction-mixed nitride nanopowders in the reference system of aluminium nitride AlN, gallium nitride GaN, and titanium nitride TiN (Al:Ga:Ti = 1:1:1) followed by their high-pressure and high-temperature sinter...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
546 Views
16 Pages

Role of Working Pressure and Deposition Power on the Tribological Performance of TiAlN Thin Films

  • Kamlesh V. Chauhan,
  • Sushant Rawal,
  • Nicky P. Patel,
  • Dattatraya Subhedar and
  • Vandan V. Vyas

The choice of brass as the substrate due to its widespread use in soft non-ferrous industrial components such as bearings and electrical connectors creates the primary basis of novelty in this study. While prior tribological studies on titanium alumi...

  • Review
  • Open Access
97 Citations
12,726 Views
20 Pages

Phase Stability and Elasticity of TiAlN

  • Igor A. Abrikosov,
  • Axel Knutsson,
  • Björn Alling,
  • Ferenc Tasnádi and ,
  • Hans Lind,
  • Lars Hultman and
  • Magnus Odén
  • + 2 authors+ 0 author

15 September 2011

We review results of recent combined theoretical and experimental studies of Ti1−xAlxN, an archetypical alloy system material for hard-coating applications. Theoretical simulations of lattice parameters, mixing enthalpies, and elastic properties are...

(This article belongs to the Special Issue Hard Materials: Advances in Synthesis and Understanding)
  • Article
  • Open Access
15 Citations
3,107 Views
16 Pages

Formation Mechanism of High-Purity Ti2AlN Powders under Microwave Sintering

  • Weihua Chen,
  • Jiancheng Tang,
  • Xinghao Lin,
  • Yunlong Ai and
  • Nan Ye

26 November 2020

In the present study, high-purity ternary-phase nitride (Ti2AlN) powders were synthesized through microwave sintering using TiH2, Al, and TiN powders as raw materials. X-ray diffraction (XRD), differential scanning calorimetry (DSC), transmission ele...

  • Review
  • Open Access
180 Citations
13,486 Views
49 Pages

Characteristics and Wear Mechanisms of TiAlN-Based Coatings for Machining Applications: A Comprehensive Review

  • Vitor F. C. Sousa,
  • Francisco José Gomes Da Silva,
  • Gustavo Filipe Pinto,
  • Andresa Baptista and
  • Ricardo Alexandre

4 February 2021

The machining process is still a very relevant process in today’s industry, being used to produce high quality parts for multiple industry sectors. The machining processes are heavily researched, with the focus on the improvement of these processes....

(This article belongs to the Special Issue Metal Machining—Recent Advances, Applications and Challenges)
  • Communication
  • Open Access
421 Views
13 Pages

26 June 2026

TiN/TiAlN coatings were deposited on 40Cr steel substrates by DC magnetron sputtering to improve the surface tribological performance of the steel. The influence of sputtering power (80, 100, 120, 140, 160 and 180 W) on coating morphology, phase stru...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
16 Citations
2,784 Views
15 Pages

10 March 2021

This paper proposes a novel approach to assessing oxidation behavior of TiAlN coatings with defined stoichiometry on the rake and flank surfaces. This is based on the multi-parametric comparison of the oxidation effects detected on the coatings’ surf...

  • Article
  • Open Access
15 Citations
5,515 Views
9 Pages

Investigations of the Deuterium Permeability of As-Deposited and Oxidized Ti2AlN Coatings

  • Lukas Gröner,
  • Lukas Mengis,
  • Mathias Galetz,
  • Lutz Kirste and ,
  • Philipp Daum,
  • Marco Wirth,
  • Frank Meyer,
  • Alexander Fromm,
  • Bernhard Blug and
  • Frank Burmeister
  • + 5 authors+ 0 author

1 May 2020

Aluminum containing Mn+1AXn (MAX) phase materials have attracted increasing attention due to their corrosion resistance, a pronounced self-healing effect and promising diffusion barrier properties for hydrogen. We synthesized Ti2AlN coatings on ferri...

(This article belongs to the Special Issue Advanced Coatings for Corrosion Protection)
  • Article
  • Open Access
10 Citations
2,833 Views
15 Pages

17 August 2024

The surface roughness and surface residual stresses are affected by the coating thickness of physical vapor deposition (PVD) TiAlN tools, which could alter the service performance of machined components. However, the relationships among the tool coat...

(This article belongs to the Special Issue Green Hybrid Machining Technology for Difficult-Machining Metal Materials)
  • Article
  • Open Access
26 Citations
8,939 Views
12 Pages

Cutting Performance of Low Stress Thick TiAlN PVD Coatings during Machining of Compacted Graphite Cast Iron (CGI)

  • Kenji Yamamoto,
  • Majid Abdoos,
  • Jose Mario Paiva,
  • Pietro Stolf and ,
  • Ben Beake,
  • Sushant Rawal,
  • German Fox-Rabinovich and
  • Stephen Veldhuis
  • + 3 authors+ 0 author

18 January 2018

A new family of physical vapor deposited (PVD) coatings is presented in this paper. These coatings are deposited by a superfine cathode (SFC) using the arc method. They combine a smooth surface, high hardness, and low residual stresses. This allows t...

(This article belongs to the Special Issue Coatings for Cutting Tools)
  • Feature Paper
  • Article
  • Open Access
172 Views
13 Pages

Alloying-Driven Mechanical Enhancement in TiAlN Coatings with Mo and Mo/W

  • Aikaterini Argyrou,
  • Maite Redin,
  • Diandian Wu,
  • Xiaoying Li and ,
  • Hanshan Dong,
  • Gonzalo G. Fuentes and
  • Elias P. Koumoulos
  • + 2 authors+ 0 author

21 October 2026

TiAlN-based coatings are widely used in demanding machining applications; however, further improvement of their mechanical and tribological performance is required under increasingly severe operating conditions. In this study, the effect of progressi...

(This article belongs to the Special Issue Advanced Coating Technology by Physical Vapor Deposition and Applications, 2nd Edition)
  • Article
  • Open Access
600 Views
20 Pages

Study on Tribological Properties and Cutting Performance of Ce Element-Doped TiAlN Tool Coating

  • Mingyi Chang,
  • Weidong Zhang,
  • Dongzhou Jia,
  • Xiaoqiang Wu and ,
  • Yongqiang Fu and
  • Qi Gao
  • + 1 author+ 0 author

Titanium alloy is difficult to cut, with tools prone to adhesion and diffusion wear that reduces life and surface quality. Traditional coatings fail to meet precision machining demands. Based on TiAlN, Ce-doped coatings were prepared via magnetron sp...

  • Article
  • Open Access
9 Citations
5,339 Views
9 Pages

Development of AlN and TiB2 Composites with Nb2O5, Y2O3 and ZrO2 as Sintering Aids

  • José C. González,
  • Miguel Á. Rodríguez,
  • Ignacio A. Figueroa,
  • María-Elena Villafuerte-Castrejón and
  • Gerardo C. Díaz

22 March 2017

The synthesis of AlN and TiB2 by spark plasma sintering (SPS) and the effect of Nb2O5, Y2O3 and ZrO2 additions on the mechanical properties and densification of the produced composites is reported and discussed. After the SPS process, dense AlN and T...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
437 Views
18 Pages

2 August 2026

W-modified TiAlN coatings were developed as hydrogen permeation barrier coatings for magnetic materials. TiAlN and TiAlN-W coatings with comparable thicknesses of approximately 1.5 μm were deposited on Fe and NdFeB substrates by physical vapor dep...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
5 Citations
2,578 Views
20 Pages

Interaction of Si Atom with the (001) Surface of TiN, AlN and TaN Compounds

  • Leonid Svyatkin,
  • Sergey Ognev,
  • Maxim Syrtanov and
  • Yury Koroteev

17 August 2023

Nowadays, the application of multicomponent coatings with multiphase nanocrystalline structure is the most promising direction in the search for wear-resistant protective coatings with a full set of necessary operational properties. Nanocrystalline m...

(This article belongs to the Special Issue Protective Composite Coatings: Implementation, Structure, Properties)
  • Article
  • Open Access
12 Citations
3,400 Views
13 Pages

Study of the Influence of Sintering Atmosphere and Mechanical Activation on the Synthesis of Bulk Ti2AlN MAX Phase Obtained by Spark Plasma Sintering

  • Christopher Salvo,
  • Ernesto Chicardi,
  • Cristina García-Garrido,
  • Rosalía Poyato and ,
  • José A. Jiménez and
  • R. V. Mangalaraja
  • + 1 author+ 0 author

14 August 2021

The influence of the mechanical activation process and sintering atmosphere on the microstructure and mechanical properties of bulk Ti2AlN has been investigated. The mixture of Ti and AlN powders was prepared in a 1:2 molar ratio, and a part of this...

(This article belongs to the Special Issue Novel Materials Synthesis by Mechanical Alloying/Milling)
  • Article
  • Open Access
46 Citations
6,680 Views
19 Pages

25 August 2022

Titanium-based alloys have gained worldwide application over the past century. However, their low wear resistance remains an unresolved challenge for the Ti6Al4V alloy, which has significant industrial use. Therefore, it is an integral part in materi...

(This article belongs to the Special Issue Multifunctional Coatings and Lubrication)
  • Feature Paper
  • Article
  • Open Access
47 Citations
11,025 Views
16 Pages

Influence of Growth Defects on the Corrosion Resistance of Sputter-Deposited TiAlN Hard Coatings

  • Peter Panjan,
  • Aljaž Drnovšek,
  • Peter Gselman,
  • Miha Čekada and ,
  • Matjaž Panjan,
  • Tonica Bončina and
  • Darja Kek Merl
  • + 2 authors+ 0 author

12 August 2019

In this work, the causes of porosity of TiAlN hard coatings sputter deposited on D2 tool steel were studied since its corrosion resistance is mainly affected by imperfections within the coating (e.g., pinholes, pores, crevices). The corrosion test wa...

(This article belongs to the Special Issue Anticorrosion Protection of Nonmetallic and Metallic Coatings)
  • Article
  • Open Access
19 Citations
5,402 Views
16 Pages

Contamination of Substrate-Coating Interface Caused by Ion Etching

  • Peter Panjan,
  • Aljaž Drnovšek,
  • Miha Čekada and
  • Matjaž Panjan

16 June 2022

In–situ cleaning of the substrate surface by ion etching is an integral part of all physical vapor deposition (PVD) processes. However, in industrial deposition systems, some side effects occur during the ion etching process that can cause re-c...

(This article belongs to the Special Issue Surface Topography Effects on Functional Properties of PVD Coatings)
  • Article
  • Open Access
4 Citations
1,857 Views
22 Pages

Influence of N2 Flow Rate on Mechanical and Tribological Properties of TAlN Coatings Deposited on 300M Substrate and Nitrocarburized Layer

  • Shiwei Zuo,
  • Qinghua Li,
  • Zhehang Fan,
  • Xiaoyong Tao and ,
  • Xiangjie Wang,
  • Hui Xie,
  • Qianqian Shen,
  • Tianshi Jia and
  • Hongyan Wu
  • + 4 authors+ 0 author

This study systematically investigates the influence of nitrogen (N2) flow rates and nitrocarburized (PNC) interlayers on the mechanical and tribological properties of TiAlN coatings deposited on 300M steel substrates via magnetron sputtering. The co...

  • Article
  • Open Access
15 Citations
5,925 Views
11 Pages

Low Temperature Step Annealing Synthesis of the Ti2AlN MAX Phase to Fabricate MXene Quantum Dots

  • Sophia Akhtar,
  • Shrawan Roy,
  • Trang Thu Tran,
  • Jaspal Singh and ,
  • Anir S. Sharbirin and
  • Jeongyong Kim
  • + 1 author+ 0 author

20 April 2022

We present the synthesis of the Ti2AlN MAX phase using two-step annealing at temperatures of 600 °C and 1100 °C, the lowest synthesis temperatures reported so far. After the successful synthesis of the Ti2AlN MAX phase, two-dimensional Ti2N M...

(This article belongs to the Topic Optical and Optoelectronic Materials and Applications)
  • Article
  • Open Access
9 Citations
2,431 Views
21 Pages

Tribological Performance of AlCrN, TiAlN, and Arc-DLC Coatings in Hot Forming of Aluminum Alloy

  • Panuwat Soranansri,
  • André Dubois,
  • Philippe Moreau,
  • Tatsuya Funazuka and ,
  • Kuniaki Dohda and
  • Laurent Dubar
  • + 1 author+ 0 author

27 September 2025

This study aims to evaluate the tribological performance of commercial PVD coatings in alleviating material transfer under unlubricated contact in the hot forming of aluminum alloy. The commercial PVD coatings included AlCrN, TiAlN, and Arc-DLC coati...

  • Article
  • Open Access
23 Citations
4,897 Views
21 Pages

Experimental Study on Drilling MDF with Tools Coated with TiAlN and ZrN

  • Krzysztof Szwajka,
  • Joanna Zielińska-Szwajka and
  • Tomasz Trzepiecinski

26 January 2019

There is increasing use of wood-based composites in industry not only because of the shortage of solid wood, but above all for their better properties such as: strength, aesthetic appearance, etc., compared to wood. Medium density fiberboard (MDF) is...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
32 Citations
6,160 Views
19 Pages

Experimental Study on Tool Wear and Delamination in Milling CFRPs with TiAlN- and TiN-Coated Tools

  • Dervis Ozkan,
  • Peter Panjan,
  • Mustafa Sabri Gok and
  • Abdullah Cahit Karaoglanli

29 June 2020

Carbon fiber-reinforced polymers (CFRPs) have very good mechanical properties, such as extremely high tensile strength/weight ratios, tensile modulus/weight ratios, and high strengths. CFRP composites need to be machined with a suitable cutting tool;...

  • Article
  • Open Access
10 Citations
3,953 Views
16 Pages

The Behavior of TiAlN and TiAlCrSiN Films in Abrasive and Adhesive Tribological Contacts

  • Wadim Schulz,
  • Vitalij Joukov,
  • Florian Köhn,
  • Wolfgang Engelhart and ,
  • Veit Schier,
  • Tim Schubert and
  • Joachim Albrecht
  • + 2 authors+ 0 author

14 September 2023

Chromium and silicon are often introduced to increase the performance of TiAlN hard coatings in dry tribological contacts. The addition of Cr and Si during a high-power impulse magnetron sputtering (HiPIMS) deposition process leads to high-quality Ti...

(This article belongs to the Special Issue Mechanical Properties and Tribological Behavior of Alloy/Coatings)
  • Article
  • Open Access
65 Citations
5,854 Views
27 Pages

Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy

  • Hamza A. Al-Tameemi,
  • Thamir Al-Dulaimi,
  • Michael Oluwatobiloba Awe,
  • Shubham Sharma and ,
  • Danil Yurievich Pimenov,
  • Ugur Koklu and
  • Khaled Giasin
  • + 2 authors+ 0 author

4 April 2021

Aluminum alloys are soft and have low melting temperatures; therefore, machining them often results in cut material fusing to the cutting tool due to heat and friction, and thus lowering the hole quality. A good practice is to use coated cutting tool...

(This article belongs to the Special Issue Additive and Subtractive Manufacturing of Advanced Materials: Applications, Future Trends and Perspectives of Industry 4.0)
  • Article
  • Open Access
15 Citations
5,606 Views
16 Pages

Study of TiAlN PVD Coating on Stamping Dies Used in Tinplate Food Package Production

  • Liliana Fernandes,
  • Francisco J. G. Silva and
  • Ricardo Alexandre

12 March 2019

The food industry is increasingly demanding in terms of the quality and appearance of its product packages. The present study focuses on identifying the main wear mechanisms developed during the stamping process of these packages. During the stamping...

of 5