106 Results Found

The objective of the present study was to investigate the reduction of mobility, availability and toxicity found in soil contaminated with lead (Pb) and cadmium (Cd) from Santo Amaro Municipality, Bahia, Brazil using two combined methods, commonly te...

The objective of this study is to use the geopolymer technique to solidify/stabilize heavy metal contaminated soil. There are over 739,700 square meters of heavy-metal-contaminated sites in Taiwan; most sites are soil farmlands. These heavy metal con...

Mine tailings from an abandoned metal mine in Korea contained high concentrations of arsenic (As) and heavy metals [e.g., As: 67,336, Fe: 137,180, Cu: 764, Pb: 3,572, and Zn: 12,420 (mg/kg)]. US EPA method 6010 was an effective method for analyzing t...

The subject of this study was the dust collected from an electric arc furnace at an unidentified-waste treatment site in southern Taiwan. The dust underwent an in situ vitrification (ISV) process and was tested using the toxicity characteristic leach...

Heavy metal contamination in soils has become one of the most critical environmental issues. The most efficient in-situ remediation technique is chemical immobilization that uses cost-effective soil amendments such as phosphate compounds to decrease...

It is well known that concrete is one of the most widely used construction materials in the world, and cement as its key constituent is partly responsible for global Carbon Dioxide (CO₂) emission. Due to these reasons, high strength concrete with low...

In the present work, thermal treatment was used to stabilize municipal solid waste incineration (MSWI) fly ash, which was considered hazardous waste. Toxicity characteristic leaching procedure (TCLP) results indicated that, after the thermal process,...

Nanoscale zero-valent iron (nZVI) has been broadly applied in the remediation of heavy metals pollution. In this research, the toxicity characteristic leaching procedure (TCLP), the in vitro gastrointestinal (IVG) method, and the diffusive gradients...

Blast furnace slag was used as the main raw material to prepare the alkali activated slag (AAS), a low-carbon binder, for cemented paste backfill (CPB). The optimum parameters for preparing the AAS binders using an orthogonal experiment were obtained...

Low-cost absorbent materials have elicited the attention of researchers as binders for the stabilisation/solidification technique. As, there is a no comprehensive study, the authors of this paper investigated the performance of Oyster shell powder (O...

Road deterioration inspires researchers to enhance the properties of asphalt binder for better performing mixes. Recycled tire rubber, or crumb rubber modifier (CRM), and used motor oil (UMO) are two modifiers that enhance asphalt binder performance...

Classification of waste is an essential part of waste management to limit potential environmental pollution; however, global systems vary. The objective was to understand the waste classification of high density sludge (HDS) from acid mine drainage (...

With the rapid increase in municipal solid waste and the associated production of incineration fly ash (IFA) in Taiwan, sustainable utilization of industrial by-products has become a pressing concern. This study evaluates the mechanical, environmenta...

Arsenic in the soil can leach into groundwater and contaminate drinking water, posing a serious risk to human health. The stabilization of arsenic in contaminated soil is one of the immobilization technologies used to remediate contaminated lands. Ho...

Two incinerators in Taiwan have recently attempted to reuse the fly and bottom ash that they produce, but the mutagenicity of these types of ash has not yet been assessed. Therefore, we evaluated the mutagenicity of the ash with the Ames mutagenicity...

Red mud is a waste byproduct of alumina production. Its release into the environment poses risks, highlighting the need for strategies to limit pollution. Using red mud as a filler in polymer-matrix composites can reduce the leaching of heavy metals...

Stabilization was applied as a remediation option for immobilizing lead (Pb) in contaminated mine soil. Four types of waste materials were used as stabilizing agents, namely waste oyster shells (WOS), calcined oyster shells (COS), natural starfish (N...

Ultraviolet (UV) radiation was selected in this study to evaluate its assistant remediation effects on Cr-contaminated soil. Various remediation materials, including corn stover (CS), corn stover biochar (CSB), polypyrrole-modified 44 corn stover (PP...

Heavy metal contamination of soils represents a persistent environmental challenge, for which in situ immobilization has emerged as a cost-effective and technically viable alternative to conventional invasive remediation technologies. This review com...

The safe disposal of hazardous waste from zinc hydrometallurgy, such as jarosite residue, is crucial for the sustainable development of the industry. The chemical, structural and morphological properties of jarosite residue from zinc smelting were st...

Arsenic sulfide residue (ASR), a by-product from the treatment of arsenic-bearing acidic wastewater, is abundantly generated but not properly disposed of in China. The utilization of such high-content arsenic waste residue is limited by the market. T...

Lead is the main toxic factor in jarosite residue. It is important to study the release behavior of lead from simulated lead-bearing jarosite (SLBJ) for predicting the stability of jarosite residue and its secondary pollution to the environment. To i...

Reuse of waste is one of the main principles of sustainable development and circular economy. Secondary alkaline lead slag is a hazardous waste generated in the recycling process of lead-acid batteries that may be suitable in construction materials....

Cadmium-contaminated soil poses a threat to the environment and human health. Biochar materials have received widespread attention as an in situ immobilizer for the efficient remediation of heavy-metal-contaminated soils. In this study, a modified bi...

A dispersive solid-phase microextraction (DSPME) sorbent consisting of poly(1,6-hexanediol diacrylate)-based polymer microspheres, with embedded graphene microparticles (poly(HDDA)/graphene), was synthesized by microfluidic emulsification/photopolyme...

Municipal solid waste incineration fly ash (MSWI FA) and granulated lead smelting slag (GLSS) are toxic industrial wastes. In the present study, granulated lead smelting slag (GLSS) was pretreated as a geopolymer precursor through the high-energy bal...

Magnetite-loaded biochar has recently received attention owing to its ability to remove arsenic from contaminated soil. In this study, mulberry stem biochar (MBC) and Fe₃O₄-loaded mulberry stem biochar (Fe₃O₄@MBC) were produced and used in a 100-day...

Coal-fired power facilities generate a polymetallic effluent (Flue Gas Desulfurization—FGD) rich in sulfate. FGD effluents may be considered an important secondary resource. This paper investigates the recovery of sulfate as barite (BaSO₄), a m...

Municipal solid waste incinerator fly ash (MSWI-FA) was used synergistically with volcanic ash (VA) to synthesize Geopolymer cement. The effects of the incorporation of 0%, 30%, and 50% of VA and the alkalinity of activating solution on the structure...

In this paper, a series of equilibrium and kinetic experiments of Hg(II) removal in a single-stage batch reactor on natural (NZ) and sulfur-impregnated zeolite (SZ) were performed. Batch sorption of Hg(II) on zeolites was studied using different isot...

In this study, we studied the influence of the dosage of modified bamboo charcoal (KAM-500-400-3) on the fixation effect of single Cu(II)-contaminated and mixed Cu(II)–Cd(II)-contaminated sediment. The results showed that it could effectively f...

Mining activity in Peru generates environmental liabilities with the potential to release toxic metals into the environment. This study conducted a comprehensive physical, chemical, mineralogical, and toxicological characterization of ten active and...

The application of coal ash (CA) in construction industries has grown rapidly, posing risk to the environment due to heavy metals leaching from the material. This research presents a simulation of ecological risk assessment and model risk indicators...

The circular economy approach aims to reduce raw material use and limit landfill disposal of industrial by-products. In the metal casting industry, waste foundry sand (WFS) disposal is a persistent financial and environmental challenge due to hazardo...

Waste cement is a construction and demolition waste produced from old buildings’ demolition and transformation. In recent years, the recycling of recycled concrete is limited to the use of recycled aggregate, and the research on the utilization of wa...

In this study, weak acid in the curing and leaching stages of copper ore was incorporated, and we analyzed its effect on the dissolution of copper and final impurities. The weak acid corresponds to a wastewater effluent from sulfuric acid plants prod...

Soil amendments have been proposed for immobilizing metallic contaminants, thus reducing their uptake by plants. For the safe production of crops in contaminated soil, there is a need to select suitable amendments that can mitigate heavy metal uptake...

Municipal solid waste incineration fly ash (MSWI FA) consists predominantly of compounds comprising elements such as calcium, aluminum, silicon, sodium, and others. Additionally, it encompasses a complex mixture of heavy metals, chlorides, sulfates,...

The problem of spent fluid catalytic cracking (SFCC) catalyst resource utilization, draws more and more attention to system analysis. SFCC was leached in an oxalic solution for comprehensive utilization. The results showed that for a D50 ≤ 17.34 &...

Bioremediation has drawn widespread concern in passivating heavy metals, but the intense toxicity of heavy metals to biological cells limits the application of functional strains. Herein, goethite-modified biochar (GMB) was chosen as the carrier to i...

This article deals with the study of hazardous chromium leaching, stabilized/solidified by cement CEM II after 28 days of curing, in an acidic environment. The mortars subjected to this study were investigated by X-ray diffraction (XRD) characterizat...

Tailing sand contains a large number of heavy metals and sulfides that are prone to forming acid mine drainage (AMD), which pollutes the surrounding surface environment and groundwater resources and damages the ecological environment. Microbially ind...

Limitations in natural aggregate resources and the continuous increase in the demand for concrete as a building material, as well as the increase in the production of waste and the problem with its storage were the reasons for attempts to replace the...

Highly toxic As(III) is the main form of As in wastewater. The retention of As by tooeleite has gradually attracted attention in recent years due to its great potential for the direct removal of As(III). The existence of natural As-bearing minerals i...

The harmless treatment of historical lead smelting slag (LSS) is of significance to ecological and environmental protection, but it is still challenging in terms of the economic feasibility of alone processing due to the low content of valuable metal...

Simultaneously stabilizing cadmium, lead, and arsenic in contaminated soils is challenging due to their significant differences in physical and chemical properties. This study developed a composite material by modifying hydrochar with iron (Fe), phos...

Sludge is a semi-solid waste generated during the process of wastewater treatment. Due to the addition of polymerized ferric chloride in the flocculation process, the sludge produced by the sewage treatment plant in Liaocheng Jiaming Industrial Park...

Stabilizing materials were prepared by different ratios of attapulgite/humic acid composites, and the optimum proportion for the remediation of Cd-polluted soils was found. The results suggested that the bioavailability of Cd in soil was decreased by...

In recent years, cadmium (Cd) contamination in agricultural soil has emerged as a significant global environmental issue, posing irreversible harm to crops and human health. As a result, efficient soil remediation techniques are urgently needed. For...

In this study, we address the ecological challenges posed by automotive battery recycling, a process notorious for its environmental impact due to the buildup of hazardous waste like foundry slag. We propose a relatively cheap and safe solution for l...