To adapt to the complex application of polyurethane bearings, it is feasible to improve the tribological performance of single polyurethane-based friction materials through the synergistic effect produced by multi-component-lubricating fillers. In th...
Filtration based processing of nanotube and polymer-nanotube dispersions is used to create polymer and nano-filler hybrid materials. The composite morphology consists of two layers: (1) a region where polymer chains have direct matrix interaction wit...
We report here a detailed experimental investigation on noncovalent functionalization of single-walled carbon nanotubes (SWNTs) with four different metallo-octaethylporphyrins (MOEPs). It has been found that the identity of the center metal of MOEP...
The assembly of sodium polystyrene sulfonate (Na+-PSS) at the surface of single-walled carbon nanotubes (SWNTs) in pH 3 aqueous solution is described. Rather than forming linear or sheet-like chain morphologies over SWNT surfaces, Na+-PSS adopts a sp...
This study explores the hydrogen generation potential via water-splitting reactions under UV-vis radiation by using a synergistic assembly of ZnO nanoparticles integrated with MoS2, single-walled carbon nanotubes (SWNTs), and crystalline silicon nano...
A novel single-walled carbon nanotube (SWNT), silver (Ag) nanoparticle, and zinc benzene carboxylate (ZnBDC) metal–organic framework (MOF) composite was synthesised and systematically characterised to develop an efficient platform for mercury i...
Polyurethane dielectric elastomer (PUDE), a typical representative of emerging intelligent materials, has advantages, such as good elasticity and flexibility, fast response speed, high electromechanical conversion efficiency, and strong environmental...
Single-walled carbon nanotubes (SWNTs) have been widely used as leading additives for improving the thermoelectric properties of organic materials, due to their unique structure and excellent electronic transport properties. However, the as-synthesiz...
Transparent and stable complementary inverters that can simultaneously support analog amplification and digital oscillation under optical stimulation are highly demanded for future see-through optoelectronic systems such as smart windows, augmented-r...
The use of flexible, self-healing conductive hydrogels as a type of typical electronic skin with the function of transmitting sensory signals has attracted wide attention in the field of biomaterials. In this study, composite hydrogels based on polyv...
Due to their unique properties, carbon nanotubes (CNTs) are finding a growing number of applications across multiple industrial sectors. These properties of CNTs are subject to influence by numerous factors, including the specific chiral structure, l...
The metabolic activity in plants or fruits is associated with volatile organic compounds (VOCs), which can help identify the different diseases. P-ethylphenol has been demonstrated as one of the most important VOCs released by the Phytophthora cactor...
Binding functional biomolecules to non-biological materials, such as single-walled carbon nanotubes (SWNTs), is a challenging task with relevance for different applications. However, no one has yet undertaken a comparison of the binding of SWNTs to d...
Here we report the fabrication and characterization of pH sensors using aligned single-walled carbon nanotubes (SWNTs). The SWNTs are dispersed in deionized (DI) water after chemical functionalization and filtration. They are deposited and organized...
Hybrids comprising cellulose nanocrystals (CNCs) and percolated networks of single-walled carbon nanotubes (SWNTs) may serve for the casting of hybrid materials with improved optical, mechanical, electrical, and thermal properties. However, CNC-dispe...
We have studied the dynamic scanning of liquid-crystalline(LC) poly(p-phenyleneterephthalamide) sulfuric acid (PPTA-H2SO4) solution, and its blend with single-walled carbon nanotubes (SWNTs), by using a flat plate rotational rheometer. The effects of...
Designing an effective targeted anticancer drug delivery method is still a big challenge, since chemotherapeutics often cause a variety of undesirable side effects affecting normal tissues. This work presents the research on a novel system consisting...
The direct electrochemistry of glucose oxidase (GOD) was accomplished at a gold electrode modified with single-wall carbon nanotubes (SWNTs). A pair of welldefined redox peaks was obtained for GOD with the reduction peak potential at –0.465 V and a p...
We fabricated a type of conductive fabric, specifically single-wall carbon nanotube-coated cotton yarns (SWNT-CYs), for electrocardiography (ECG) signal transmission utilizing a “dipping and drying” method. The conductive cotton yarns were prepared b...
The goal of this research was to obtain high-density single-walled carbon nanotube forests (SWNTs) on conductive substrates for different applications, including field emission. For this, dip-coating was chosen as the catalyst deposition method, to s...
Although the supramolecular structure of porphyrin polymers on flat surfaces (i.e., mica and HOPG) has been extensively studied, the self-assembly arrays of porphyrin polymers on the SWNT (as curved nanocarbon surfaces) have yet to be fully identifie...
For sustainable energy storage devices with long-term endurance, exploring novel electrode materials can be a realistic focus in the areas of robust structures, surface area control, high channel conductivity, and others. A composite of a hierarchica...
Volatile organic compounds (VOCs) released by plants are closely associated with plant metabolism and can serve as biomarkers for disease diagnosis. Huanglongbing (HLB), also known as citrus greening or yellow shoot disease, is a lethal threat to the...
In this study, a new way of protecting textile wearable electronics is proposed. A natural product, silk fibroin, known for its high biocompatibility, biodegradability, and low cytotoxicity, was selected to cover the functionalized fabric to improve...
Single-walled carbon nanotubes (SWNTs) exhibit distinct electronic properties, categorized as metallic or semiconducting, determined by their chirality. The precise and selective separation of these electronic types is pivotal for advancing nanotechn...
The knowledge of physico-chemical properties of carbon nanotubes, including behavior in organic solvents is very important for design, manufacturing and utilizing of their counterparts with improved properties. In the present study a quantitative s...
Slafractonia leguminicola infects red clover and other legumes, causing black patch disease. This pathogenic fungus also produces two mycotoxins, slaframine and swainsonine, that are toxic to livestock grazing on clover hay or pasture infested with S...
This paper considers the problem of creating a conductive matrix with a framework made of carbon nanotubes (CNTs) for cell and tissue engineering. In silico investigation of the electrical conductivity of the framework formed by T-junctions of single...
In recent years, plant genetic engineering has advanced agriculture in terms of crop improvement, stress and disease resistance, and pharmaceutical biosynthesis. Cells from land plants and algae contain three organelles that harbor DNA: the nucleus,...
Indium-based oxide semiconductors have been commercialized because of their excellent electrical properties, but the high cost, limited availability, and environmental toxicity of indium necessitate the development of alternative materials. Among the...
The chirality-specific study of single-walled carbon nanotubes (SWCNTs) necessitates their solution-phase processing with tip-horn sonication in the presence of a stabilizing surfactant such as sodium dodecyl sulfate (SDS), a process that has been sh...
A hybrid film consisting of zinc oxide nanoparticles (ZnO NPs) and carbon nanotubes (CNTs) is formed on a glass substrate using a simple and swift spin coating process for the use in ultraviolet photodetectors (UV PDs). The incorporation of various t...
In the past two decades, single-walled carbon nanotubes (SWNTs) have been explored for electronic applications because of their high charge carrier mobility, low-temperature solution processability and mechanical flexibility. Semiconducting SWNTs (s-...
Homogenously dispersing single-walled carbon nanotubes (SWNTs) in solvents has been one critical step towards exploiting their exceptional properties in high-performance components. However, the solubility of SWNTs is severely limited by the inert tu...
Flavin with defined helical self-assembly helps to understand chemical designs for obtaining high-purity semiconducting (s)-single-walled carbon nanotubes (SWNT) in a diameter (dt)-selective manner for high-end applications. In this study, flavins co...
Non-magnetic metal nanoparticles have been previously applied for the growth of single-walled carbon nanotubes (SWNTs). However, the activation mechanisms of non-magnetic metal catalysts and chirality distribution of synthesized SWNTs remain unclear....
Individual single–walled carbon nanotubes (SWNTs) with distinct electronic types are crucial for the fabrication of SWNTs–based electronic and magnetic devices. Herein, the water–soluble polymethyl(1–butyric acidyl)silane (BA&...
Carbon nanotubes (CNTs), having either metallic or semiconducting properties depending on their chirality, are advanced materials that can be used for different devices and materials (e.g., fuel cells, transistors, solar cells, reinforced materials,...
Solubilization of single walled carbon nanotubes (SWNTs) in aqueous gel phases formed by reversible, G-quadruplex self-assembly of guanosine monophosphate (GMP) alone or with guanosine (Guo) is described. Unlike other media and methods for aqueous so...
In general, the insertion of Stone-Wales (SW) defects into single-walled carbon nanotubes (SWNTs) reduces the buckling resistance of SWNTs under axial compression. The magnitude of reduction is more noticeable in zigzag-type SWNTs than armchair- or c...
Solution-processed oxide thin-film transistors (TFTs) can lead to a significant cost-effective process and suitable for large-scale fabrication. However, they often face limitations, such as lower field-effect mobility, the use of indium which is tox...
The controlled synthesis of single-walled carbon nanotubes (SWNTs) is essential for their industrial application. This study investigates the synthesis yield of SWNTs, which depends on the positions of the samples on a horizontal chemical vapor depos...
In this work, the effect of the single-walled carbon nanotubes (SWNTs) as the mixtures of metallic and semiconducting tubes (M + S-SWNTs) as well as highly separated semiconducting (S-SWNTs) and metallic (M-SWNTs) tubes on the photoluminescence (PL)...
The polyaniline/single-walled carbon nanotubes (PANI/SWNTs) composites with a content of SWNTs varying from 8 wt% to 32 wt% were synthesized using a solid-state synthesis method. The structure and morphology of the samples were characterized by fouri...
We report on dispersions and thin films of chromatic conductive nanocomposites of poly(p-phenylene ethynylene)s (PPEs) and single-walled carbon nanotubes (SWNTs) generated via solution mixing. The linear, conjugated PPEs with dialkyl- and dialkyloxy-...
Nitric oxide (NO), a free radical present in biological systems, can have many detrimental effects on the body, from inflammation to cancer. Due to NO’s short half-life, detection and quantification is difficult. The inability to quantify NO ha...
There is significant interest in understanding whether nanomaterials with outstanding mechanical or electrical properties also possess antibacterial properties. However, assessment of antibacterial activity is a complex problem at the interface of ch...
The effect of cleaning the surface of single-walled carbon nanotube (SWNT) networks by thermal and the O2 plasma treatments is presented in terms of NH3 gas sensing characteristics. The goal of this work is to determine the relationship between the p...
Millions of workers are occupationally exposed to volatile organic compounds (VOCs) annually. Current exposure assessment techniques primarily utilize sorbent based preconcentrators to collect VOCs, with analysis performed using chemical or thermal d...
Carbon nanotubes (CNTs) are considered an advanced form of carbon. They have superior characteristics in terms of mechanical and thermal properties compared to other available fibers and can be used in various applications, such as supercapacitors, s...
of 3