247 Results Found

PVC is widely used in packaging, electrical insulation, and medical devices due to its versatility owing to its resistance, incombustible and barrier properties as well as affordable cost. In the present study, bibliometric and co-occurrence analyses...

Polyvinyl chloride (PVC) is one of the most widely used polymers due to its physical properties and versatility. Water consumption of the suspension method is a critical issue that hinders competitiveness. In that case, this study implements water in...

Polyvinyl chloride (PVC) is the third most widely produced plastic on an industrial scale, due to its diverse applications and physicochemical properties. Its production through suspension polymerization presents significant safety challenges due to...

Poly(vinyl chloride) (PVC) is one of the most widely used polymers due to its strength, low cost, and light weight. Industrial production is mainly conducted by suspension polymerization, which facilitates the control of the emissions of vinyl chlori...

Recently, polyvinyl chloride (PVC) has emerged as one of the most widely used polymers on the planet due to its versatile mechanical properties and chemical resistance. Suspension polymerization is the most employed method for its production, owing t...

One of the main processes of shoe-sole production is injection molding, in which the desired shape is achieved by injecting a heated thermoplastic polymer in a highly plastic state under high pressure into the mold cavity. The study shows the energy...

The new demands for sustainable operation in the chemical industry due to increasing environmental regulations and agreements have generated the need to adapt existing processes to more intelligent production. The plastics sector is in a complex posi...

Water regeneration in PVC production is a key issue to consider, given the high freshwater consumption rate of the process. This research evaluates the inherent safety of poly(vinyl chloride) (PVC) production via suspension polymerization by implemen...

PVC has become an indispensable material worldwide. However, its production method (suspension) presents significant sustainability challenges, such as negative environmental impacts and high operational costs due to energy consumption. For this reas...

This study investigated the effects of polyvinyl chloride (PVC) addition on low-rank coal’s pyrolysis characteristics, especially the products distribution and chlorine migration. Hailar lignite (HLE) with different industrial, pure, PVC-content addi...

The chlor-alkali industries produce caustic soda (NaOH), chlorine (Cl₂), and hydrogen (H₂) as primary products. In 2021, the global chlor-alkali market was valued at $63.2 billion. The article evaluates the global aspects of chlor-alkali industries a...

Regulation (EU) No 305/2011 lays down harmonized conditions for marketing construction products in the European Union. One of its consequences has been the introduction of the product standard EN 50575 and standard EN 130501-6, concerning power, cont...

Photovoltaic (PV) powered Electric Vehicle Charging Stations (PVCS) have received extensive attention recently due to the complementary relationship of PV energy and electric vehicles. This paper proposes a methodology aimed at assisting a Charging P...

Poly(vinyl chloride) (PVC) is widely used to produce various consumer goods, including food packaging, toys for children, building materials, and cosmetic products. However, despite their widespread use, phthalate plasticizers have been identified as...

Risk management is crucial in engineering projects, especially in highly complex environments like petrochemical plants producing polyvinyl chloride (PVC). This study proposes a tailored risk management model, using analytic hierarchy process (AHP) a...

Plastic streams dominated by polyethylene (PE) including PE HD/MD (High Density/Medium Density) and PE LD/LLD (Low Density/Linear Low Density), polypropylene (PP), and polyvinyl chloride (PVC) across Europe demand a design framework that links synthe...

The unified bioaccessibility research group of Europe (BARGE) method (UBM) suggests using in vitro experimental conditions for simulating the release of chemicals from confined matrices, such as soils and sediments, in the human gastrointestinal trac...

The decision-making process requires the prior definition and fulfillment of certain factors, especially when it comes to complex areas such as supply chain management. One of the most important items in the initial phase of the supply chain, which s...

We present a novel theoretical approach to the problem of light energy conversion in thermostated semiconductor junctions. Using the classical model of a two-level atom, we deduced formulas for the spectral response and the quantum efficiency in term...

Building on our “Critical Inventory”, we analyse the need for the regulation of PVC plastics in the EU and its member states. To this end, we checked the three phases of the life cycle of PVC plastics: production, use and end-of-life. In...

A good way to make carbon materials was presented in low-temperature polyvinyl chloride (PVC) carbonization by catalysis. The process of low-temperature PVC carbonization by CuAl-layered double hydroxide (CuAl-LDH) was investigated by thermogravimetr...

Polyvinyl chloride (PVC) releases hydrochloric acid (HCl) during its thermal degradation, and hydrochloric acid can react with hydration products of alkali-activated binders. According to this characteristic of PVC and the temperature change that occ...

Four types of phosphomolybdates (iron, cobalt, nickel, and zinc) were each combined with antimony trioxide (Sb₂O₃) to prepare polyvinyl chloride (PVC) composites. The effects of the phosphomolybdates on the combustion behavior, smoke release, and mec...

Rigid PVC plastics (R-PVC) contain large amounts of chlorine, and improper disposal can adversely affect the environment. Nevertheless, there is still a lack of sufficient studies on hydrothermal treatment (HTT) for the efficient dechlorination of R-...

Solvothermal treatment using glycerol effectively removes chlorine from polyvinyl chloride (PVC). Additive-free PVC was dechlorinated by treatment with glycerol in an autoclave at 200–240 °C. Liquid glycerol was coexistent with a red powder...

The fact that the use of a large number of plastic products has brought serious pollution to the environment has always been the focus of global attention. The development of photocatalytic degradable plastics is one of the effective ways to solve th...

The connection of universities with new knowledge in various sciences leads to entrepreneurship and the progress of the economic development of universities. Countries with higher education institutions, in the shadow of practical research and develo...

Polyvinyl chloride (PVC), one of the most important polymer materials nowadays, has a large variety of formulations through the addition of various plasticizers to meet the property requirements of the different fields of applications. Routine analyt...

Premature ventricular contractions (PVCs), common in the general and patient population, are irregular heartbeats that indicate potential heart diseases. Clinically, long-term electrocardiograms (ECG) collected from the wearable device is a non-invas...

Material recycling and thermal treatment are the two most common recycling methods employed for plastic waste management. Thermal treatment for energy recovery is more widely applied compared with material recycling because the latter requires a high...

The Voluntary Agreement for Collecting and Recycling Plastic Waste (VA), including polyvinyl chloride (PVC) profiles and flooring materials, will be converted to an Extended Producer Responsibility (EPR) system from 2023. The objective of this study...

Three organosilanes were synthesized in good yields from the condensation of 4,4′,4″-((phenylsilanetriyl)tris(oxy))tribenzaldehyde and 4-substituted anilines under acidic conditions. The structure of the organosilanes was confirmed using...

Foodborne illnesses, such as infections or food poisoning, can be caused by bacterial biofilms present in food matrices or machinery. The production of biofilms by several strains of Bacillus cereus on different materials under different culture cond...

The development of sustainable and mechanically versatile polymeric materials is essential to meet the growing demand for eco-friendly, high-performance products. This study investigates the mechanical properties of blends comprising polyvinyl chlori...

Polyvinyl chloride (PVC) is a synthetic polymer with a wide range of applications with impact on our daily life. It can undergo photodegradation with toxic products that are hazardous to both human health and the environment. In addition, photodegrad...

Polyvinyl chloride compositions are widely used to obtain various types of products. In the composition of the PVC composite, one of the main ingredients is a plasticizer, the introduction of which makes it possible to vary the characteristics of the...

Polyvinyl chloride (PVC) belongs to the most widely used group of thermoplastics. Most of the market for PVC products belongs to plasticized compositions. Plasticizers are the most demanded additives in the polymer industry. Environmental problems an...

PVC and balsa wood are usually used in the interlayer structures of wind turbine blades. In this paper, a comparative study on the lightning damage characteristics of the two materials was carried out by molecular dynamic simulations and impact curre...

In PVC compounds, hydrogen chloride plays a fundamental role in ·H and ·OH radical trapping, lowering the flame energy during combustion. Furthermore, it yields actual Lewis acids promoting the cross-linking of the polyene sequences fro...

To enhance the ecological properties of polyvinyl chloride (PVC) products, the fabrication of PVC-based composites using biofillers with acceptable performance characteristics could be considered. In this work, plant-filled PVC-based composite materi...

The mass production of synthetic plastics began in the last century and today they have become one of the most abundant man-made materials. The disposal or the beneficiation of end-of-life plastics represent a great challenge for society especially i...

Plastics have recently become an indispensable part of everyone’s daily life due to their versatility, durability, light weight, and low production costs. The increasing production and use of plastics poses great environmental problems due to t...

Ventilation-controlled fires tend to be the worst for toxicity, because they produce large amounts of fire effluent containing high yields of toxic products. In order to examine the dependence of the amount of chosen few main combustion gases under v...

Polyvinyl chloride (PVC) resins are widely used in modern society due to their acid and alkali resistance, low cost, and strong insulation properties. However, the high chlorine (Cl) content in PVC poses significant challenges for its recycling. This...

Biochar (bio-charcoal) is a low-cost and eco-friendly material. It can be obtained by thermochemical conversion of different biomass sources, for example, in the total absence of oxygen (pyrolysis) or in oxygen-limited atmosphere (gasification). The...

Sentinel-3 synergy (SYN) VEGETATION (VGT) products were designed to provide continuity to the SPOT/VEGETATION (SPOT VGT) base products archive. Since the PROBA-V mission acted as a gap filler between SPOT VGT and Sentinel-3, and in principle, a conti...

In this work, a method to increase the dispersion of graphene (GN) in the matrix of rigid poly(vinyl chloride) (PVC) by using a natural plant extract from Curcuma longa L. (CE) is proposed. Currently, despite the increasing number of reports on the i...

Emissions of volatile organic compounds (VOCs) and carbonyls from three types of commercially available wallpapers (i.e., PVC-coated, paper-backed, natural material-coated) in Korea were evaluated using a 20 L small chamber. A total of 332 products...

Pyrolysis of waste polyvinyl chloride (PVC) is considered a promising and highly efficient treatment method. This work aims to investigate the kinetics, and thermodynamics of the process of PVC pyrolysis. Thermogravimetry of PVC pyrolysis at three he...

This study investigates the torrefaction of polyvinyl chloride (PVC) and cellulose, two major constituents of agricultural waste, with the aim of improving chlorine removal and enhancing the energy quality of the resulting solid products. Thermodynam...