Skip to Content

511 Results Found

  • Article
  • Open Access
451 Views
32 Pages

Experimental and Numerical Evaluation of a Hybrid CTES Tank with PCM

  • Anastasiia Piestretsova,
  • Miroslav Rimar,
  • Marcel Fedak,
  • Andrii Kulikov and ,
  • Jan Kizek,
  • Dmytro Shmyhol and
  • Michal Smajda
  • + 2 authors+ 0 author

8 May 2026

The growing global demand for cooling technologies, driven by climate change and increasing energy consumption, creates a need for effective solutions to reduce energy use and carbon footprint. One promising approach is the application of Cold Therma...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
339 Views
18 Pages

Optimization of Ultrasonic Parameters and Model Development for Nondestructive CTE Measurement of LAS Ultra-Low-Expansion Glass Ceramics

  • Shuyun Chang,
  • Wenqing Wei,
  • Xue Qi,
  • Xufeng Wang and ,
  • Zuyi Zhang,
  • Jian Gu,
  • Dahong Mo and
  • Hu Deng
  • + 3 authors+ 0 author

10 September 2026

Lithium aluminosilicate (LAS) ultra-low-expansion glass ceramics are core materials for precision optical systems, whose quality and dimensional stability are critically constrained by the uniformity of the coefficient of thermal expansion (CTE). Thi...

(This article belongs to the Special Issue Ultrasound Applications in Materials Science and Processing)
  • Article
  • Open Access
1 Citations
1,857 Views
15 Pages

Low Coefficient of Thermal Expansion (CTE) Ceramic–Thermoplastic Composite for Fused Deposition Modelling of RF and Microwave Devices

  • Vishvajitsinh Kosamiya,
  • Liguan Li,
  • Ioannis N. Gkikas,
  • Juan D. Castro and ,
  • Julia Oppenheimer,
  • Ioannis Spanopoulos and
  • Jing Wang
  • + 2 authors+ 0 author

7 November 2025

Additive manufacturing (AM) has significant potential for rapid prototyping of intricate 3-dimensional geometries, yet its adoption in RF and microwave applications remains limited. Key barriers include inadequate material characterization, high diel...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
10 Citations
4,973 Views
11 Pages

18 January 2024

As drone technology is rapidly becoming accessible to school children in terms of both low cost and ease-of-use, primary and secondary school teachers are beginning to consider where modern drones can play an important role in schooling. To date, the...

(This article belongs to the Section STEM Education)
  • Review
  • Open Access
1 Citations
1,317 Views
52 Pages

6 July 2026

Autonomous driving sensor fusion housings (SFHs) integrate LiDAR, radar, camera, and computing modules within a shared mechanical and thermal enclosure. This review examines how coefficient of thermal expansion (CTE) mismatch among housing polymers,...

(This article belongs to the Section Systems Engineering)
  • Review
  • Open Access
3 Citations
3,768 Views
18 Pages

Smart-Farm-Integrated Cold Thermal Energy Storage (CTES) Systems for Clean, Solar-Powered Rural Postharvest Cooling: A Review

  • Ahsan Mehtab,
  • Hong-Seok Mun,
  • Eddiemar B. Lagua,
  • Hae-Rang Park and ,
  • Jin-Gu Kang,
  • Young-Hwa Kim,
  • Md Kamrul Hasan,
  • Md Sharifuzzaman,
  • Sang-Bum Ryu and
  • Chul-Ju Yang
  • + 5 authors+ 0 author

Cold thermal energy storage (CTES) has emerged as a critical clean-energy technology for enhancing postharvest management in rural agricultural supply chains, where losses often exceed 20–40% due to inadequate cooling infrastructure and unrelia...

  • Article
  • Open Access
2 Citations
4,067 Views
17 Pages

Non-Targeted Metabolomics Approach Revealed Significant Changes in Metabolic Pathways in Patients with Chronic Traumatic Encephalopathy

  • Jinkyung Lee,
  • Suhyun Kim,
  • Yoon Hwan Kim,
  • Uiyeol Park and ,
  • Junghee Lee,
  • Ann C. McKee,
  • Kyoung Heon Kim,
  • Hoon Ryu and
  • Jeongae Lee
  • + 4 authors+ 0 author

Chronic traumatic encephalopathy (CTE) is a neurodegenerative disease that is frequently found in athletes and those who have experienced repetitive head traumas. CTE is associated with a variety of neuropathologies, which cause cognitive and behavio...

(This article belongs to the Special Issue Advances Research in Traumatic Encephalopathy)
  • Review
  • Open Access
25 Citations
6,380 Views
64 Pages

Composite Track-Etched Membranes: Synthesis and Multifaced Applications

  • Anastassiya A. Mashentseva,
  • Duygu S. Sutekin,
  • Saniya R. Rakisheva and
  • Murat Barsbay

15 September 2024

Composite track-etched membranes (CTeMs) emerged as a versatile and high-performance class of materials, combining the precise pore structures of traditional track-etched membranes (TeMs) with the enhanced functionalities of integrated nanomaterials....

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Review
  • Open Access
16 Citations
6,949 Views
15 Pages

8 August 2023

Chronic Traumatic Encephalopathy (CTE) is a neurodegenerative disease consistently associated with repetitive traumatic brain injuries (TBIs), which makes multiple professions, such as contact sports athletes and the military, especially susceptible...

(This article belongs to the Topic Advances in Diagnostics, Brain Delivery Systems and Therapeutics of Neurodegenerative Disease)
  • Review
  • Open Access
8 Citations
5,768 Views
21 Pages

27 November 2023

Chronic traumatic encephalopathy (CTE) is a unique neurodegenerative disease that is associated with repetitive head impacts (RHI) in both civilian and military settings. In 2014, the research criteria for the clinical manifestation of CTE, traumatic...

(This article belongs to the Special Issue Neurotrauma: Mechanisms, Pathways, and Emerging Therapeutic Interventions)
  • Article
  • Open Access
4 Citations
3,903 Views
7 Pages

14 January 2021

A study on the coefficient of thermal expansion (CTE) of single-wall carbon nanotube (SWCNT)-reinforced nanocomposites is presented in this paper. An interfacial adhesion factor (IAF) is introduced for the purpose of modelling the adhesion between SW...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2020)
  • Review
  • Open Access
55 Citations
13,210 Views
46 Pages

Research Progress on the Phase Change Materials for Cold Thermal Energy Storage

  • Xinghui Zhang,
  • Qili Shi,
  • Lingai Luo,
  • Yilin Fan and ,
  • Qian Wang and
  • Guanguan Jia
  • + 1 author+ 0 author

7 December 2021

Thermal energy storage based on phase change materials (PCMs) can improve the efficiency of energy utilization by eliminating the mismatch between energy supply and demand. It has become a hot research topic in recent years, especially for cold therm...

(This article belongs to the Section D: Energy Storage and Application)
  • Review
  • Open Access
69 Citations
14,981 Views
40 Pages

Recent Advances on The Applications of Phase Change Materials in Cold Thermal Energy Storage: A Critical Review

  • Farhan Lafta Rashid,
  • Mudhar A. Al-Obaidi,
  • Anmar Dulaimi,
  • Luís Filipe Almeida Bernardo and ,
  • Zeina Ali Abdul Redha,
  • Hisham A. Hoshi,
  • Hameed B. Mahood and
  • Ahmed Hashim
  • + 3 authors+ 0 author

18 August 2023

Cold thermal energy storage (CTES) based on phase change materials (PCMs) has shown great promise in numerous energy-related applications. Due to its high energy storage density, CTES is able to balance the existing energy supply and demand imbalance...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2023)
  • Article
  • Open Access
17 Citations
5,402 Views
13 Pages

Aluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion

  • Peter Lewis,
  • Andrew Tarrant,
  • Andreas Frehn,
  • Fritz Grensing and ,
  • James Nicholson,
  • Nick Farrah and
  • Martyn Acreman
  • + 2 authors+ 0 author

11 May 2024

With the ever-growing emphasis on global decarbonization and rapid increases in the power densities of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresse...

(This article belongs to the Special Issue Advances in Metal Matrix Composites: Structure, Properties and Applications)
  • Article
  • Open Access
2 Citations
1,168 Views
40 Pages

27 February 2026

Pharmaceutical industries require a continuous heat supply to sustain around-the-clock operations such as sterilization. While fossil-fuel systems ensure reliability, they increase emissions and fuel dependence. Integrating a small-scale parabolic tr...

(This article belongs to the Special Issue Advances in Solar Thermal Energy Harvesting, Storage and Conversion—2nd Edition)
  • Article
  • Open Access
1 Citations
1,284 Views
69 Pages

Colorless Polyimides Derived from Novel Role-Dividing Spiro-Type Monomers: Strategies to Overcome the Trade-Off Between Low Linear Coefficients of Thermal Expansion and Low Thickness-Direction Birefringence Without Fillers

  • Masatoshi Hasegawa,
  • Yoshihiko Terada,
  • Ko Nagahaba,
  • Soichi Tsukuda and ,
  • Toya Ikuma,
  • Hikaru Sugihara,
  • Ryosuke Masaka,
  • Shinya Takahashi,
  • Junichi Ishii and
  • Takao Miwa
  • + 5 authors+ 0 author

30 April 2026

This study presents unique polymeric materials applicable to plastic substrates for use in flexible-display devices that overcome the trade-off between low linear coefficients of thermal expansion (CTE) and low thickness-direction birefringence (&Del...

(This article belongs to the Section Polymer Chemistry)
  • Feature Paper
  • Review
  • Open Access
181 Citations
22,650 Views
31 Pages

18 October 2017

This paper reviews the development of new high-temperature polymeric materials applicable to plastic substrates in image display devices with a focus on our previous results. Novel solution-processable colorless polyimides (PIs) with ultra-low linear...

(This article belongs to the Special Issue High Performance Polymers)
  • Article
  • Open Access
31 Citations
6,226 Views
30 Pages

11 March 2022

In this study, practically useful colorless polyimides (PIs) with low coefficients of thermal expansion (CTEs) and other desirable properties were prepared from hydrogenated pyromellitic dianhydride (1-exo,2-exo,4-exo,5-exo-cyclohexanetetracarboxylic...

(This article belongs to the Special Issue Advanced Polyimides and Other High Performance Polymers)
  • Article
  • Open Access
48 Citations
13,374 Views
22 Pages

22 October 2018

Diabetes is a chronic disorder characterized by hyperglycemia due to decreased levels of insulin or the inefficiency of the tissue to use it effectively. Infertility is known as a major outcome of diabetes and affects the male reproductive system by...

  • Article
  • Open Access
45 Citations
7,039 Views
12 Pages

Preparation and Properties of Inherently Black Polyimide Films with Extremely Low Coefficients of Thermal Expansion and Potential Applications for Black Flexible Copper Clad Laminates

  • Yao-yao Tan,
  • Yan Zhang,
  • Gang-lan Jiang,
  • Xin-xin Zhi and ,
  • Xiao Xiao,
  • Lin Wu,
  • Yan-Jiang Jia,
  • Jin-gang Liu and
  • Xiu-min Zhang
  • + 4 authors+ 0 author

5 March 2020

In the current work, a series of black polyimide (PI) films with excellent thermal and dimensional stability at elevated temperatures were successfully developed. For this purpose, two aromatic diamines including 4,4′-iminodianline (NDA) and 2-...

(This article belongs to the Special Issue Polymers for Electronic Applications)
  • Article
  • Open Access
54 Citations
6,773 Views
15 Pages

Reduced Coefficients of Linear Thermal Expansion of Colorless and Transparent Semi-Alicyclic Polyimide Films via Incorporation of Rigid-Rod Amide Moiety: Preparation and Properties

  • Gang-lan Jiang,
  • Dong-yang Wang,
  • Hao-peng Du,
  • Xiao Wu and ,
  • Yan Zhang,
  • Yao-yao Tan,
  • Lin Wu,
  • Jin-gang Liu and
  • Xiu-min Zhang
  • + 4 authors+ 0 author

11 February 2020

Semi-alicyclic colorless and transparent polyimide (CPI) films usually suffer from the high linear coefficients of thermal expansion (CTEs) due to the intrinsic thermo-sensitive alicyclic segments in the polymers. A series of semi-alicyclic CPI films...

(This article belongs to the Special Issue Polymers for Electronic Applications)
  • Article
  • Open Access
7 Citations
2,532 Views
47 Pages

Colorless Polyimides with Low Linear Coefficients of Thermal Expansion and Their Controlled Soft Adhesion/Easy Removability on Glass Substrates: Role of Modified One-Pot Polymerization Method

  • Masatoshi Hasegawa,
  • Takehiro Shinoda,
  • Kanata Nakadai,
  • Junichi Ishii and ,
  • Tetsuo Okuyama,
  • Kaya Tokuda,
  • Hiroyuki Wakui,
  • Naoki Watanabe and
  • Kota Kitamura
  • + 4 authors+ 0 author

7 July 2025

This study presents colorless polyimides (PIs) suitable for use as plastic substrates in flexible displays, designed to be compatible with controlled soft adhesion and easy delamination (temporary adhesion) processes. For this purpose, we focused on...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
574 Views
11 Pages

A Bimaterial Beam Strategy for Suppressing Thermal Deformation of Arc-Shaped CFRP Ribs via Asymmetric Laminate Design

  • Yonggang Xue,
  • Xiaofei Ma,
  • Yonggang Fang,
  • Dayu Zhang and ,
  • Jialong Zhu and
  • Pengbo Su
  • + 1 author+ 0 author

22 July 2026

Deployable reflector antennas demand high geometric precision; the Ruze equation directly links surface error to RF gain. Arc-shaped CFRP ribs are vulnerable to thermal deformation, as their curvature converts in-plane expansion into out-of-plane dis...

(This article belongs to the Special Issue Experimental Testing and Numerical Modelling for Structural Dynamics)
  • Article
  • Open Access
12 Citations
3,676 Views
41 Pages

20 September 2023

In this paper, novel colorless polyimides (PIs) derived from 5,5′-bis(2,3-norbornanedicarboxylic anhydride) (BNBDA) were presented. The results of single-crystal X-ray structural analysis using a BNBDA-based model compound suggested that it had...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
9 Citations
3,108 Views
26 Pages

Coefficients of Thermal Expansion in Aligned Carbon Staple Fiber-Reinforced Polymers: Experimental Characterization with Numerical Investigation

  • Julian Kupski,
  • Lucian Zweifel,
  • Miriam Preinfalck,
  • Stephan Baz and ,
  • Mohammad Hajikazemi and
  • Christian Brauner
  • + 1 author+ 0 author

17 April 2025

Carbon staple fiber composites are materials reinforced with discrete-length carbon fibers processed using traditional textile technologies, offering moderate mechanical properties and flexibility in manufacturing. These composites can be produced fr...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymer Composites: Advancements in Recycling and Sustainability)
  • Review
  • Open Access
32 Citations
10,631 Views
11 Pages

Relationship of Structure and Function of DNA-Binding Domain in Vitamin D Receptor

  • Lin-Yan Wan,
  • Yan-Qiong Zhang,
  • Meng-Di Chen,
  • Chang-Bai Liu and
  • Jiang-Feng Wu

7 July 2015

While the structure of the DNA-binding domain (DBD) of the vitamin D receptor (VDR) has been determined in great detail, the roles of its domains and how to bind the motif of its target genes are still under debate. The VDR DBD consists of two zinc f...

(This article belongs to the Section Molecular Diversity)
  • Article
  • Open Access
12 Citations
5,412 Views
16 Pages

7 September 2022

Negative photosensitive polyimides (PSPIs) with the photo-patterned ability via the photocrosslinking reactions induced by the i-line (365 nm) and h-line (426 nm) emitting wavelengths in high-pressure mercury lamps have been paid increasing attention...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
9 Citations
3,493 Views
26 Pages

5 February 2023

New finite element analysis procedures are developed in this study to obtain the precise stress distribution patterns of prestressed composites. Within the FEM procedures, an equivalent thermal method is modified to realize the prestress application,...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
3 Citations
2,540 Views
15 Pages

Development of a Low-Expansion and Low-Shrinkage Thermoset Injection Moulding Compound Tailored to Laminated Electrical Sheets

  • Florian Braunbeck,
  • Florian Schönl,
  • Timo Preußler,
  • Hans-Christian Reuss and ,
  • Martin Demleitner,
  • Holger Ruckdäschel and
  • Philipp Berendes
  • + 2 authors+ 0 author

This study presents a thermoset moulding compound designed for electrical machines with high power densities. The compound reduces residual stresses induced by the difference in thermal expansion during use and by shrinkage in the compound during the...

  • Article
  • Open Access
60 Citations
13,491 Views
19 Pages

15 September 2017

To develop the polyimide (PI) which is closely matched to the coefficient of the thermal expansion (CTE) of copper, a series of PIs are prepared from 5,4′-diamino-2-phenyl benzimidazole (DAPBI), 4,4′-diaminodiphenyl ether (ODA), and 3,3′,4,4′-benzoph...

(This article belongs to the Special Issue Processing-Structure-Properties Relationships in Polymers)
  • Article
  • Open Access
11 Citations
4,372 Views
25 Pages

Colorless Polyimides Derived from Octahydro-2,3,6,7-anthracenetetracarboxylic Dianhydride

  • Masatoshi Hasegawa,
  • Hiroki Sato,
  • Katsuhisa Hoshino,
  • Yasuhisa Arao and
  • Junichi Ishii

28 April 2023

A cycloaliphatic tetracarboxylic dianhydride, octahydro-2,3,6,7-anthracenetetracarboxylic dianhydride (OHADA) was synthesized to obtain novel colorless polyimides (PIs). Herein, approaches for decolorizing an OHADA prototype and simplifying the entir...

  • Article
  • Open Access
39 Citations
6,502 Views
24 Pages

8 April 2020

A series of ester-linked diamines, with different lengths and substituents, was synthesized to obtain poly(ester imide)s (PEsIs) having improved properties. A substituent-free ester-linked diamine (AB-HQ) was poorly soluble in N-methyl-2-pyrrolidone...

(This article belongs to the Special Issue High-Functional Polymeric Materials)
  • Review
  • Open Access
1 Citations
628 Views
22 Pages

18 June 2026

Background: The growing complexity of liquid biopsy in precision oncology demands a structured classification framework that can accommodate its expanding multi-omic scope. As the field has matured from early Tumor Microemboli research—focused...

(This article belongs to the Special Issue The Circulating Tumor Microenvironment (cTME): Emerging Taxonomies and Multimodal Landscapes)
  • Article
  • Open Access
10 Citations
5,635 Views
18 Pages

Amelioration of Congenital Tufting Enteropathy in EpCAM (TROP1)-Deficient Mice via Heterotopic Expression of TROP2 in Intestinal Epithelial Cells

  • Gaku Nakato,
  • Sohshi Morimura,
  • Michael Lu,
  • Xu Feng and ,
  • Chuanjin Wu and
  • Mark C. Udey
  • + 1 author+ 0 author

6 August 2020

TROP1 (EpCAM) and TROP2 are homologous cell surface proteins that are widely expressed, and often co-expressed, in developing and adult epithelia. Various functions have been ascribed to EpCAM and TROP2, but responsible mechanisms are incompletely ch...

(This article belongs to the Special Issue Epithelial Cell Adhesion Molecule and Cancers: From Molecular Mechanisms to Therapeutic Opportunities)
  • Article
  • Open Access
23 Citations
5,932 Views
13 Pages

29 October 2016

In 2015, Korea inaugurated an emissions trading scheme (ETS). In this regard, many studies have considered the sustainable performance and efficiency of industries that emit carbon; however, few have examined ETS at company level. This paper focuses...

(This article belongs to the Special Issue Sustainable Governance in Northeast Asia: Challenges for Sustainable Frontier)
  • Article
  • Open Access
32 Citations
3,930 Views
19 Pages

Production of Hybrid Nanocomposites Based on Iron Waste Reinforced with Niobium Carbide/Granite Nanoparticles with Outstanding Strength and Wear Resistance for Use in Industrial Applications

  • Shams A. M. Issa,
  • Abeer M. Almutairi,
  • Karma Albalawi,
  • Ohoud K. Dakhilallah and ,
  • Hesham M. H. Zakaly,
  • Antoaneta Ene,
  • Dalia E. Abulyazied,
  • Sahar M. Ahmed,
  • Rasha A. Youness and
  • Mohammed A. Taha
  • + 5 authors+ 0 author

28 January 2023

The main objective of this work is to recycle unwanted industrial waste in order to produce innovative nanocomposites with improved mechanical, tribological, and thermal properties for use in various industrial purposes. In this context, powder metal...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
10 Citations
3,001 Views
15 Pages

12 July 2023

Light-colored and transparent polyimide (PI) films with good high-temperature dimensional stability are highly desired for advanced optoelectronic applications. However, in practice, the simultaneous achievement of good optical and thermal properties...

(This article belongs to the Section Smart and Functional Polymers)
  • Review
  • Open Access
41 Citations
29,083 Views
10 Pages

eSports in K-12 and Post-Secondary Schools

  • Gregory Rothwell and
  • Michael Shaffer

eSports is a rising modality of sports entertainment in the United States and has growing implications for education. Providing competitive eSports teams in schools satisfies the growing desire to train and educate students on the skills emphasized i...

(This article belongs to the Special Issue Current Issues and Trends in Higher Education)
  • Review
  • Open Access
2 Citations
929 Views
40 Pages

3 April 2026

Carbon dioxide (CO2) hydrate slurries have emerged as promising candidates for cold thermal energy storage (CTES) and refrigeration systems due to their high latent heat, controllable flow behavior, and environmentally friendly nature. These slurries...

(This article belongs to the Section Energy Materials)
  • Opinion
  • Open Access
4 Citations
5,490 Views
7 Pages

Authentic hands-on learning experiences are paramount for applying content and practices in science, technology, engineering, and mathematics (STEM) and career and technical (CTE) education. Such learning experiences are foundational for preparing P-...

  • Article
  • Open Access
7 Citations
3,012 Views
11 Pages

21 July 2023

Polyethersulfone (PES) has outstanding thermal and dimensional stability. It is considered an engineering thermoplastic. However, its high coefficient of thermal expansion (CTE) hinders its use in automobiles, microelectronics, and flexible display a...

(This article belongs to the Collection Progress in Polymer Composites and Nanocomposites)
  • Article
  • Open Access
8 Citations
4,585 Views
13 Pages

In this study, we focus on 3D-printed PEEK/CFRTP (Carbon-Fiber-Reinforced Thermoplastic) and PEEK (Polyether Ether Ketone) materials as new space materials. In space, there are intense ultraviolet (UV) rays that are weakened by the atmosphere on Eart...

  • Article
  • Open Access
4 Citations
5,498 Views
13 Pages

20 November 2016

Tri-generation plants will have an important role in the near future in the residential sector where heating and cooling demands come into play throughout the year. Depending on the building’s location, the characteristics of its enclosure and its us...

  • Article
  • Open Access
37 Citations
19,030 Views
20 Pages

3 June 2015

This paper presents a warpage analysis method that predicts the warpage behavior of electroplated Cu films on glass fiber-reinforced polymer (GFRP) packaging substrates. The analysis method is performed using the following sequence: fabricate specime...

  • Article
  • Open Access
5 Citations
4,395 Views
17 Pages

23 January 2024

In recent years, there has been a specific call to not only increase the number of engineering-trained individuals but also to address the lack of diversity in science, technology, engineering and mathematics (STEM) fields, including individuals with...

(This article belongs to the Special Issue STEM Education for All: Breaking Barriers and Building Bridges)
  • Perspective
  • Open Access
260 Views
20 Pages

27 October 2026

Definitive diagnosis of chronic traumatic encephalopathy (CTE) requires postmortem neuropathology, but in vivo tau positron emission tomography (PET) is beginning to change what can be studied in living people. Tau-PET studies in former American foot...

  • Article
  • Open Access
20 Citations
4,987 Views
41 Pages

28 February 2024

In this study, a series of ester-linked tetracarboxylic dianhydrides (TCDAs) with 2,6-naphthalene-containing longitudinally extended structures consisting of different numbers of aromatic rings (NAr = 6–8) was synthesized to obtain novel modifi...

(This article belongs to the Special Issue Advances in High-Performance Polymer Materials)
  • Article
  • Open Access
58 Citations
6,777 Views
11 Pages

Colorless Polyimides Derived from an Alicyclic Tetracarboxylic Dianhydride, CpODA

  • Hiroki Ozawa,
  • Eriko Ishiguro,
  • Yuri Kyoya,
  • Yasuaki Kikuchi and
  • Toshihiko Matsumoto

22 August 2021

An alicyclic tetracarboxylic dianhydride having cyclopentanone bis-spironorbornane structure (CpODA) was polycondensated with aromatic dianhydrides to form the corresponding poly(amic acid)s which possessed logarithmic viscosities in the range 1.47–0...

(This article belongs to the Special Issue Advanced Polyimides and Other High Performance Polymers)
  • Article
  • Open Access
8 Citations
6,230 Views
14 Pages

1 November 2017

This paper presents a design optimization method based on theoretical analysis and numerical calculations, using a commercial multi-physics solver (e.g., ANSYS and ESI CFD-ACE+), for a 3D continuous model, to analyze the bending characteristics of an...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
7 Citations
2,411 Views
10 Pages

15 August 2022

In this paper, the Sharma-Tasso-Olver-Burgers (STOB) system is analyzed by the Lie point symmetry method. The hypergeometric wave solution of the STOB equation is derived by symmetry reductions. In the meantime, the consistent tanh expansion (CTE) me...

(This article belongs to the Special Issue Symmetry in Integrable Systems: Theory and Application)

of 11