- Article
This paper proposes the preparation and formula analysis of anti-biofouling Titania–polyurea (TiO2–SPUA) spray coating, which uses nano-scale antibacterial and photocatalytic agents, titanium dioxide, to construct regularly hydrophobic su...
This paper proposes the preparation and formula analysis of anti-biofouling Titania–polyurea (TiO2–SPUA) spray coating, which uses nano-scale antibacterial and photocatalytic agents, titanium dioxide, to construct regularly hydrophobic su...
Thin films of titanium dioxide (TiO2) nanocrystals, widely acknowledged for their unique physical-chemical properties and functionalities, are used in disparate technological fields, including photovoltaics, sensing, environmental remediation and ene...
This study examines the effect of oxygen concentration and sputtering power on the surface morphology of TiO2 thin films deposited by DC reactive magnetron sputtering. Surface roughness parameters were obtained using MountainsMap® software(10.2)...
In this work, pure and silver (Ag)-loaded TiO2 nanocrystals (NCs) with various concentrations of Ag were prepared by soft chemical route and the effect of Ag nanoparticles (NPs) on the functional properties of TiO2 was studied. X-ray diffraction (XRD...
TiO2-SiO2-based nanocomposites with highly porous structures are gaining ever increasing attention due to their specific properties and large variability of synthesis pathways together with wide information on the impact of the synthesis on the activ...
Herein, we reported the synthesis of TiO2 through different non-hydrolytic sol-gel (NHSG) routes in viscous polymer media. For the first time, the influence of the polymer nature (Polystyrene (PS) or Polypropylene (PP)) on the morphology of synthesiz...
In this paper, we report on the effect of titanium dioxide (TiO2) target sintering temperature on the morphological and optical properties of amorphous titanium dioxide thin films synthesized by pulsed laser deposition (PLD) on indium tin oxide (ITO)...
Polycarbonate (PC) is susceptible to environmental stress cracking (ESC) when the conditions of pre-strain and presence of fluid with a compatible solubility index are both prevalent. One approach to counter this involves using nanoscale fillers to b...
The compound CaCl2 plays a significant role in the process of direct calciothermic reduction of Ti2O3 to prepare porous titanium. In this paper, the effect of CaCl2 on reduction products by calciothermic reduction of Ti2O3 was investigated. Results s...
The side effects induced by nanoparticle exposure at a cellular level are one of the priority research topics due to the steady increase in the use of nanoparticles (NPs). Recently, the focus on cellular morphology and mechanical behavior is gaining...
The chemical, structural, morphological, and optical properties of Al-doped TiO2 thin films, called TiO2/Al2O3 nanolaminates, grown by plasma-enhanced atomic layer deposition (PEALD) on p-type Si <100> and commercial SLG glass were discussed. H...
Background: the clinical application of orthopedic or dental implants improves the quality of the lives of patients. However, the long-term use of implants may lead to implant loosening and related complications. The purpose of this study is to depos...
Background/Objectives: Titanium and its flagship alloy (Ti6Al4V) represent the clinical gold standard for orthopedic and dental implants; however, optimizing their surface architecture to serve as high-capacity, reliable platforms for localized thera...
TiO2 time-dependent electrodeposited thin films were synthesized using an electrophoretic apparatus. The XRD analysis revealed that the films could exhibit a crystalline structure composed of ~81% anatase and ~6% rutile after 10 s of deposition, with...
Titanium dioxide (TiO2) has an extraordinary photocatalytic activity and it effectively provides self-cleaning properties for cotton products. With the presence of succinic acid, it helps the adherence of the TiO2 nanoparticles on cotton surfaces. Ho...
Solution combustion synthesis was used to produce a junction between different TiO2 supports (anatase TiO2 nanorods (TNR) and nanoparticles (TNP) and TiO2 with anatase core and amorphous shell (a-TNR)) and narrow bandgap (BG) semiconductor β-Bi2...
Piezoelectric photocatalysis improves catalytic activity by preventing photogenerated carrier recombination. Hence, three morphologies of BaTiO3 (BTO) were successfully prepared for the piezoelectric photocatalytic degradation of tetracycline (TC, C(...
Nanostructured titania is one of the most commonly encountered constituents of nanotechnology devices for use in energy-related applications, due to its intrinsic functional properties as a semiconductor and to other favorable characteristics such as...
Chemical processes are very important for the development of high-efficiency crystalline solar cells, mainly for surface texturing to improve light absorption and cleaning processes to reduce surface recombination. Recently, research has been focusin...
In the present work, highly ordered titanium dioxide (TiO2) nanotube anodes were grown using a rapid anodization process. The photoelectrochemical performances of these electrodes strongly depend on the anodization conditions. Parameters such as elec...
Perovskite solar cells (PSCs) are quickly becoming efficient solar cells due to the effective physicochemical properties of the absorber layer. This layer should ideally be placed between a stable hole transport material (HTM) layer and a conductive...
In order to design and tailor materials for a specific application like gas sensors, the synthesis route is of great importance. Undoped and rhodium-doped barium titanate powders were successfully synthesized by two routes; oxalate route and classic...
We present a comparative study of the morphology and structural as well as magnetic properties of crystalline Fe3O4/NiO bilayers grown on both MgO(001) and SrTiO3(001) substrates by reactive molecular beam epitaxy. These structures were investigated...
A cost-effective solution for the synthesis of high-porosity TiO2 aerogels, which can be used as a mesoporous perovskite network charge-carrier material during the manufacture of solar cells, is described. The effects of the synthesis parameters (pre...
Noble metal nanoparticles (NMNPs) enhanced TiO2 response and extended its activity under visible light. Photocatalytic activity of TiO2 modified with noble metal nanoparticles strongly depends on the physicochemical properties of NMNPs. Among others,...
Exposure to nanoparticles by various routes results in size-dependent translocation of nanoparticles to the systemic circulation and subsequent accumulation in the liver. The purpose of this study was to determine possible adverse effects in the live...
In the current study, Al2O3–TiN composites were successfully fabricated with various particle sizes (10, 20, 30, and 50 μm) and concentrations (5, 10, 15, and 20 vol %) via a novel ball milling + Ti reactive sintering process. By applying the reactiv...
Ferrous titanate (FeTiO3) has a high theoretical capacity and physical and chemical properties stability, so it is a potential lithium anode material. In this study, FeTiO3 nanopowder and nanosheets were prepared by the sol–gel method and the h...
Nanocomposite systems and nanoparticle (NP) films are crucial for many applications and research fields. The structure-properties correlation raises complex questions due to the collective structure of these systems, often granular and porous, a cruc...
In this work, the structural, vibrational, morphological, and colloidal properties of commercial 15.1 nm TiO2 nanoparticles (NPs) and nanowires (NWs, 5.6 thickness, 74.6 nm length) were studied with the purpose of determining their ecotoxicological p...
The dye regeneration in dye-sensitized solar cells (DSSCs) is improved by optimizing the charge separation at the level of the sensitized semiconductor treatment of the mesoporous electrode by TiCl4 that passivates the surface for back electron trans...
This study investigates the effects of chromium (Cr3+) doping on BaTiO3 nanoparticles synthesized via the sol–gel route. X-ray diffraction confirms a Cr-induced cubic-to-tetragonal phase transition, with lattice parameters and crystallite size...
TiO2–Bi2O3 composite rods were synthesized by combining hydrothermal growth of rutile TiO2 rod templates and sputtering deposition of Bi2O3 thin films. The TiO2–Bi2O3 composite rods with β-Bi2O3 phase and α/β-Bi2O3 dual-ph...
Disk- and filament-like ZnO crystals were decorated on one-dimensional TiO2 nanostructures (TiO2–ZnO) through various integrated physical and chemical synthesis methods. The morphology of the ZnO crystals on TiO2 varied with the chemical synthesis me...
Bone regeneration relies on the coordinated interplay between mechanical and biological cues. Piezoelectric composites, capable of converting mechanical strain into electrical signals, offer a promising approach to stimulate osteogenesis. This study...
Heterostructures formed by ultrathin borocarbonitride (BCN) layers grown on TiO2 nanoribbons were investigated as photoanodes for photoelectrochemical water splitting. TiO2 nanoribbons were obtained by thermal oxidation of TiS3 samples. Then, BCN lay...
The micromorphology of fillers plays an important role in tribological and mechanical properties of polymer matrices. In this work, a TiO2-decorated Ti2C3 (TiO2/Ti3C2) composite particle with unique micro-nano morphology was engineered to improve the...
The application of titanium oxide nanotubes for the removal of contaminants from freshwater is a rapidly growing scientific interest, especially when it comes to water conservation strategies. In this study we employed four different titanium oxide n...
The growth of nanocrystals (NCs) from metal oxide-based substrates with exposed high-energy facets is of particular importance for many important applications, such as solar cells as photoanodes due to the high reactivity of these facets. The hydroth...
In this study, TiO2-Bi2S3 composites with various morphologies were synthesized through hydrothermal vulcanization with sputtering deposited Bi2O3 sacrificial layer method on the TiO2 nanorod templates. The morphologies of decorated Bi2S3 nanostructu...
In this paper, khaki titanium dioxide (TiO2) crystals via hierarchical self-assembly of nanorods with different morphologies and specific exposed crystal facets were prepared for the first time by using a TiCl3 treatment process in the presence and a...
The release of aluminum (Al) and vanadium (V) ions represents a critical concern limiting the long-term performance and biocompatibility of Ti6Al4V-based permanent orthopedic implants. This study focuses on improving the corrosion resistance of Ti6Al...
Titanium dioxide–carbon sphere (TiO2–CS) composites were constructed via using prefabricated carbon spheres as templates. By the removal of template from the TiO2–CS, TiO2 hollow structures (HS) were synthesized. The CS templates we...
Although polyetheretherketone (PEEK) is becoming more widely used in dentistry applications, little is known about how aging will affect this material. Therefore, this study aimed to investigate the influence of an aging treatment on fracture charact...
A TiO2@Cu2O semiconductor heterostructure with better photochemical response compared to TiO2 was obtained using an electrochemical deposition method of Cu2O on the surface of TiO2 nanotubes. The choice of 1D nanotubes was motivated by the possibilit...
Electrochemical mechanisms of molten salt electrolysis from TiO2 to titanium were investigated by Potentiostatic electrolysis, cyclic voltammetry, and square wave voltammetry in NaCl-CaCl2 at 800 °C. The composition and morphology of the product...
CaCO3-TiO2 composite particles were prepared with calcium carbonate (CaCO3) and TiO2 in stirred mill according the wet grinding method. The pigment properties, morphology, and structure of CaCO3-TiO2 composite particles and the interaction behaviors...
Titanium dioxide (TiO2) nanotubes obtained by the anodic oxidation of titanium metal foils can be used for the photocatalytic degradation of organic pollutants. The aim of our study was to determine the influence of the titanium foil’s surface...
Outstanding ferroelectric and piezoelectric properties of PbZrxTi1-xO3 (PZT) make nano and sub-micrometer particles of this material interesting for future nanotechnological applications as well as for fundamental studies of ferroelectricity at the n...
TiO2-loaded poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-coHFP) membranes were produced by supercritical CO2-assisted phase inversion. Three different TiO2 loadings were tested: 10, 20, and 30 wt% with respect to the polymer. Increasing the...
of 39