Skip to Content

8,319 Results Found

  • Article
  • Open Access
23 Citations
5,446 Views
13 Pages

21 June 2019

Thermal Fatigue of flip chip component solder joints is widely existing in thermal energy systems, which imposes a great challenge to operational safety. In order to investigate the influential factors, this paper develops a model to analyze thermal...

(This article belongs to the Special Issue Modelling, Simulation and Control of Thermal Energy Systems)
  • Article
  • Open Access

CSET-3D for Component-Level Thermal Attribution on Stereo-Reconstructed Power Equipment Surfaces

  • Weiguan Wang,
  • Jiahua Guan,
  • Zhongbiao Ling,
  • Xin Li and ,
  • Hui Xiao,
  • Tianrui Yin and
  • Feng Hu
  • + 2 authors+ 0 author

19 November 2026

Thermal observations may be consistent with several adjacent components of power equipment. CSET-3D associates them with a component-labeled exterior surface reconstructed from an RGB stereo pair. The thermal transport plan uses projection and visibi...

(This article belongs to the Special Issue Artificial Intelligence and Its Application in Condition Monitoring and Evaluation of Power Equipment)
  • Article
  • Open Access
2 Citations
1,786 Views
17 Pages

Research on the Phase Behavior of Multi-Component Thermal-Fluid-Heavy Oil Systems

  • Xiangji Dou,
  • Mingjie Liu,
  • Xinli Zhao,
  • Yanfeng He and ,
  • Erpeng Guo,
  • Jiahao Lu,
  • Borui Ma and
  • Zean Chen
  • + 3 authors+ 0 author

22 September 2024

Multi-component thermal luid technology optimizes development effects and has a strong adaptability, providing a new choice for the efficient development of heavy oil reservoirs. However, due to the significant differences between the phase behavior...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
8 Citations
4,919 Views
20 Pages

Thermal Patterns at the Campi Flegrei Caldera Inferred from Satellite Data and Independent Component Analysis

  • Francesco Mercogliano,
  • Andrea Barone,
  • Luca D’Auria,
  • Raffaele Castaldo and ,
  • Malvina Silvestri,
  • Eliana Bellucci Sessa,
  • Teresa Caputo,
  • Daniela Stroppiana,
  • Stefano Caliro and
  • Pietro Tizzani
  • + 7 authors+ 2 authors

9 December 2024

In volcanic regions, the analysis of Thermal InfraRed (TIR) satellite imagery for Land Surface Temperature (LST) retrieval is a valid technique to detect ground thermal anomalies. This allows us to achieve rapid characterization of the shallow therma...

(This article belongs to the Special Issue Multiplatform Remote Sensing Techniques for Active Tectonics, Seismotectonics, and Volcanic Hazard Assessment)
  • Article
  • Open Access
4 Citations
2,078 Views
17 Pages

Multi-Objective Optimization Design of Dual-Spindle Component Based on Coupled Thermal–Mechanical–Vibration Collaborative Analysis

  • Xiaoliang Lin,
  • Yiming Xie,
  • Xiaolei Deng,
  • Jing Tian and ,
  • Yue Han and
  • Peng Wang
  • + 1 author+ 0 author

5 December 2024

To comprehensively improve the thermal, static and dynamic characteristics and achieve lightweighting for CNC machine tools, this paper proposes a multi-objective joint optimization method based on coupled thermal–mechanical–vibration col...

(This article belongs to the Special Issue Error Measurement, Analysis, and Compensation Technology for CNC Machine Tools)
  • Article
  • Open Access
8 Citations
1,771 Views
17 Pages

Effects of LTNE on Two-Component Convective Instability in a Composite System with Thermal Gradient and Heat Source

  • Varalakshmi K. Balaji,
  • Manjunatha Narayanappa,
  • Ramalingam Udhayakumar,
  • Ghada AlNemer and ,
  • Sumithra Ramakrishna and
  • Gangadharaih Yeliyur Honnappa
  • + 1 author+ 0 author

13 October 2023

An analytical study is conducted to examine the influence of thermal gradients and heat sources on the onset of two-component Rayleigh–Bènard (TCRB) convection using the Darcy model. The study takes into account the effects of local ther...

(This article belongs to the Special Issue Numerical and Analytical Study of Fluid Dynamics)
  • Article
  • Open Access
341 Views
21 Pages

14 July 2026

Thin-layer extra-heavy oil reservoirs are commonly characterized by small oil-bearing thickness, high crude oil viscosity, and severe steam override. To address these problems, a multi-component thermal composite flooding method with branched horizon...

(This article belongs to the Section I1: Fuel)
  • Article
  • Open Access
5 Citations
2,882 Views
17 Pages

1 December 2020

Integration of modeling and optimization of a thermal management system simultaneously depends on heat transfer performance of the components and the topological characteristics of the system. This paper introduces a heat current method to construct...

(This article belongs to the Special Issue Advanced Thermal Management of Battery and Electronic Systems)
  • Article
  • Open Access
1 Citations
533 Views
17 Pages

Dominant Controlling Parameters of Multi-Component Thermal Fluid Flooding in Fractured Shale Oil Reservoirs

  • Yangnan Shangguan,
  • Qianqian Tian,
  • Junhong Jia,
  • Weiliang Xiong and ,
  • Hua Guan,
  • Guowei Yuan,
  • Lili Wang,
  • Huilin Wang,
  • Xiangji Dou and
  • Jinmei Bai
  • + 5 authors+ 0 author

1 September 2026

Fractured shale oil reservoirs possess ultra-tight matrix pores and suffer unsatisfactory oil recovery under conventional exploitation, while systematic comparisons among CO2 flooding, CO2/CH4 mixed gas flooding, and multi-component thermal fluid (MT...

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
3 Citations
2,024 Views
23 Pages

Analysis of Adaptability and Application Potential of Supercritical Multi-Source Multi-Component Thermal Fluid Technology for Offshore Heavy Oil in China

  • Yan Sun,
  • Lijun Zhang,
  • Yuting Bai,
  • Taichao Wang and ,
  • Wenbo Zhang,
  • Jipeng Zhang and
  • Pengcheng Liu
  • + 2 authors+ 0 author

24 April 2024

Supercritical multi-source, multi-component thermal fluid is a heavy oil thermal recovery method independently developed by China National Offshore Oil Co., Ltd (Beijing, China). It uses waste liquid at the production end of the production well as th...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
10 Citations
3,085 Views
10 Pages

Design of the LIMELIGHT Test Rig for Component Testing for High-Temperature Thermal Energy Storage with Liquid Metals

  • Klarissa Niedermeier,
  • Martin Lux,
  • Anisa Purwitasari,
  • Alfons Weisenburger and ,
  • Markus Daubner,
  • Franziska Müller-Trefzer and
  • Thomas Wetzel
  • + 2 authors+ 0 author

13 October 2023

Thermal energy storage systems for high temperatures >600 °C are currently mainly based on solid storage materials that are thermally charged and discharged by a gaseous heat transfer fluid. Usually, these systems benefit from low storage mate...

(This article belongs to the Special Issue Processes in 2023)
  • Article
  • Open Access
37 Citations
9,296 Views
23 Pages

17 January 2018

To cope with the progressive tightening of the emission regulations, gasoline and diesel engines will continuously require highly improved exhaust after-treatment systems. In the case of diesel engines, the selective catalytic reduction (SCR) appears...

(This article belongs to the Section I: Energy Fundamentals and Conversion)
  • Article
  • Open Access
17 Citations
7,931 Views
10 Pages

30 May 2016

To improve the safety of lithium ion batteries, a multi-component (MC) additive (consisting of vinylene carbonate (VC), 1,3-propylene sulfite (PS) and dimethylacetamide (DMAC)) is used in the baseline electrolyte (1.0 M LiPF6/ethylene carbonate (EC)...

  • Article
  • Open Access
116 Views
20 Pages

Experimental Study on the Enhancement Mechanism of Multi-Component Thermal Fluid Huff-n-Puff in Deep Extra-Heavy Oil Reservoirs

  • Rui Han,
  • Tao Lin,
  • Jianliang Zhang,
  • Rong Sun and ,
  • Zhongtao Yuan,
  • Ming Wang,
  • Lan Mo,
  • Xiaopu Wang,
  • Hailong Zhao and
  • Zhaoxu Zhang
  • + 6 authors+ 1 author

3 November 2026

Due to high formation pressure and extremely poor crude oil mobility, the synergistic enhancement mechanism of heat–gas–chemical interactions and the governing laws of key factors during multi-component thermal fluid (MCTF) huff-n-puff in...

(This article belongs to the Special Issue Advances in Heavy Oil Reservoir Development)
  • Article
  • Open Access
4 Citations
2,518 Views
18 Pages

Influence of Structural Components on Thermal Deformations in Large Machine Tools

  • Álvaro Sáinz de la Maza García,
  • Leonardo Sastoque Pinilla and
  • Luis Norberto López de Lacalle Marcaide

In sectors that require large components with tight tolerances, the control of machine thermal deformations as a result of ambient temperature variations, motor consumption, and heating of moving components is essential. There are many alternatives f...

  • Article
  • Open Access
5 Citations
3,677 Views
26 Pages

Simplification of Thermal Networks for Magnetic Components in Space Power Electronics

  • David de la Hoz,
  • Guillermo Salinas,
  • Vladimir Šviković and
  • Pedro Alou

5 June 2020

The volume of magnetic components for space applications, directly related to the launch cost, and their performance are critically influenced by their capability to dissipate the internal electromagnetic power losses. This is the reason why accurate...

  • Article
  • Open Access
2 Citations
1,322 Views
24 Pages

1 July 2025

Gas turbines in land-based microgrids and shipboard-isolated power grids frequently face operational challenges, such as the startup and shutdown of high-power equipment and sudden load fluctuations, which significantly impact their performance. To e...

(This article belongs to the Section Thermodynamics)
  • Article
  • Open Access
1,547 Views
17 Pages

Numerical Investigation of Heat Dissipation Components and Thermal Management System in PEM Fuel Cell Engines

  • Yuchen Zhou,
  • Zhuqian Zhang,
  • Haojie Zhang,
  • Heyao Li and ,
  • Xianglong Meng,
  • Luwei Zhu and
  • Xinyu Liao
  • + 2 authors+ 0 author

13 January 2026

A one-dimensional analytical model for a proton exchange membrane fuel cell (PEMFC) engine is presented. The model is structured into three main subsystems: the fuel cell stack, the intake and exhaust system, and the thermal management system. The mo...

  • Review
  • Open Access
445 Views
48 Pages

Research Progress on Response Regulation of Components in Hydrogen Transport and Thermal Management Systems of AeroEngines

  • Yiqiao Li,
  • Yang Xiao,
  • Jing Huang,
  • Yali Jiang and ,
  • Luyuan Gong,
  • Yali Guo and
  • Shengqiang Shen
  • + 2 authors+ 0 author

15 September 2026

Compared to conventional fuels, hydrogen fuel offers advantages such as high specific heat capacity, low boiling point, and zero carbon emissions, demonstrating significant potential for green energy conservation and sustainable development in the av...

(This article belongs to the Section Vehicle Engineering)
  • Article
  • Open Access
700 Views
24 Pages

Thermal Properties and Pore Structure of Electric Arc Furnace Slag Mortars for Solar-Exposed Building Components

  • Luciana Sucupira,
  • Gabriel Zsembinszki,
  • Sara Risco Amigó,
  • João Castro-Gomes and
  • Luisa F. Cabeza

11 July 2026

The valorisation of electric arc furnace (EAF) slag in construction materials can reduce the consumption of virgin raw materials while creating opportunities for CO2 mineralisation. However, the combined influence of EAF slag aggregate, aggregate par...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
1 Citations
1,733 Views
16 Pages

Stress Prediction Processes of Metal Pressure-Bearing Complex Components in Thermal Power Plants Based on Machine Learning

  • Shutao Wang,
  • Renqiang Shi,
  • Jian Wu,
  • Yunfei Ma and ,
  • Chao Yang and
  • Huan Liu
  • + 1 author+ 0 author

27 January 2025

The real-time stress assessment of metal pressure components is one of the key factors in ensuring the safe operation of thermal power plants. To address the challenge of real-time prediction of stress in the key areas of complex special-shaped metal...

(This article belongs to the Special Issue Industrial Applications of Modeling Tools)
  • Article
  • Open Access
12 Citations
2,799 Views
22 Pages

22 July 2022

Steel fibers are widely used because they can effectively improve the tensile, compressive and flexural properties of concrete structures. The selection of steel fiber dosage and aspect ratio at high temperature has an important impact on the flexura...

(This article belongs to the Special Issue Advanced Steel Composites in Construction Engineering)
  • Article
  • Open Access
17 Citations
4,474 Views
17 Pages

23 March 2022

To provide necessary information for further pasteurization experiments and computer simulations based on radio frequency (RF) and microwave (MW) energy, dielectric and thermal properties of walnut components were measured at frequencies between 10 a...

(This article belongs to the Special Issue Applications of Radio Frequency Heating in Food Processing)
  • Article
  • Open Access
1 Citations
2,824 Views
26 Pages

17 October 2024

The heating system is an essential component of the glass molding process. It is responsible for heating the glass to an appropriate temperature, allowing it to soften and be easily molded. However, the energy consumption of the heating system become...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
682 Views
21 Pages

21 April 2026

This paper presents a collaborative optimization design methodology aimed at improving heat dissipation efficiency through the modulation of microstructural variations. The approach addresses the thermal protection requirements of high-temperature co...

(This article belongs to the Special Issue Thermal Properties of Composite Materials)
  • Article
  • Open Access
450 Views
23 Pages

29 July 2026

A major challenge in the optimization of thermal performance of opaque envelope components is that the calculation workload of energy consumption simulations of full factorial combinations leads to a prohibitive increase as the factors and levels mul...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
7 Citations
4,854 Views
17 Pages

Thermal Analysis of the Driving Component Based on the Thermal Network Method in a Lunar Drilling System and Experimental Verification

  • Dewei Tang,
  • Hong Xiao,
  • Fanrui Kong,
  • Zongquan Deng and ,
  • Shengyuan Jiang and
  • Qiquan Quan
  • + 1 author+ 0 author

13 March 2017

The main task of the third Chinese lunar exploration project is to obtain soil samples that are greater than two meters in length and to acquire bedding information from the surface of the moon. The driving component is the power output unit of the d...

(This article belongs to the Section L: Energy Sources)
  • Article
  • Open Access
7 Citations
2,829 Views
19 Pages

Thermal Mass Effect on the Solution Cooling Rate and on HIPped Astroloy Component Properties

  • Unai Galech Napal,
  • Miren Aristizabal Segarra,
  • Borja Elguezabal Lazcano,
  • Antonio Sivo and
  • Iñigo Iturriza Zubillaga

15 February 2022

Astroloy is a Ni-based superalloy with high-volume fraction of γ′, which gives high temperature properties but reduces its forgeability. Therefore, powder metallurgy manufacturing processes such as Near Net Shape HIPping are the most suit...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
198 Views
21 Pages

Process Optimization of Metal FDM AA6061: Thermal Debinding and Sintering Toward Enhanced Component Quality

  • Noora Talib Mohammed Alzeyadi,
  • Felip Fenollosa-Artés and
  • José-María Cabrera

20 October 2026

Fused Deposition Modeling (FDM) of AA6061 aluminum alloys faces several critical challenges, including limited parameter control, inefficient thermal debinding, and sintering difficulties associated with oxide formation. These factors hinder the broa...

(This article belongs to the Special Issue Welding and Additive Manufacturing of Metals)
  • Article
  • Open Access
2,323 Views
12 Pages

1 October 2022

A thermal component is suggested to be the physical composition of the ejecta of several bright gamma-ray bursts (GRBs). Such a thermal component is discovered in the time-integrated spectra of several short GRBs as well as long GRBs. In this work, w...

(This article belongs to the Special Issue Advances in Astrophysics and Cosmology – in Memory of Prof. Tan Lu)
  • Article
  • Open Access
5 Citations
1,173 Views
42 Pages

The Interplay Between Combustion and Component Thermal Loading in Next-Generation Marine Engines Employing Reactivity-Controlled Compression Ignition

  • Alireza Kakoee,
  • Kian Golbaghi,
  • Alberto Cafari,
  • Aneesh Vasudev and ,
  • Sadegh Mehranfar,
  • Amin Mahmoudzadeh Andwari,
  • Ben Smulter,
  • Jari Hyvönen and
  • Maciej Mikulski
  • + 4 authors+ 0 author

23 December 2025

Energy transition demands cleaner and more efficient marine engines, accelerating the development of reactivity-controlled compression ignition (RCCI) concepts with multi-fuel capability. However, the coupling between combustion behavior and thermal...

(This article belongs to the Special Issue Advanced Research on Internal Combustion Engines and Engine Fuels—2nd Edition)
  • Article
  • Open Access
13 Citations
2,990 Views
15 Pages

Preparation and Thermophysical Properties of New Multi-Component Entropy-Stabilized Oxide Ceramics for Thermal Barrier Coatings

  • Wenzhe Li,
  • Yongping Zhu,
  • Xueying Wang,
  • Lili Zhao and ,
  • Ying Chu,
  • Fuhua Chen,
  • Chang Ge and
  • Shige Fang
  • + 3 authors+ 0 author

Five kinds of multi-component entropy-stabilized oxide ceramics were prepared by a solid-state reaction method for thermal barrier coatings, namely La0.125Y0.125Yb0.125Gd0.125Zr0.5O1.75 (LaYYbGdZr), Y0.125Yb0.125Gd0.125Ta0.125Zr0.5O1.875 (YYbGdTaZr),...

(This article belongs to the Special Issue Advances in Novel Coatings)
  • Article
  • Open Access
3 Citations
1,566 Views
21 Pages

24 October 2025

In this study, syntactic composite foams were developed by incorporating cenosphere (CS) particles recovered from recycled fly ash into a one-component polyurethane (PU) foam system. During production, CS was added to the spray-applied PU foam at spe...

(This article belongs to the Special Issue Thermal Properties of Composite Materials)
  • Article
  • Open Access
266 Views
14 Pages

Experimental Verification of the Thermal Component of a User-Defined Source-Term CFD Model of Heat and Mass Transfer in a Thin Liquid Layer

  • Alexandr Anatolyevich Volnenko,
  • Daulet Koshkarovich Zhumadullayev,
  • Tynlybek Saifutdinovich Bazhirov,
  • Alexey Alexandrovich Salin and ,
  • Artem Sergeevich Ponikarov,
  • Eduard Vladislavovich Osipov and
  • Sergey Ivanovich Ponikarov
  • + 2 authors+ 0 author

15 October 2026

A modular computational fluid dynamics (CFD) framework for heat and nonequimolar mass transfer in a thin liquid layer is formulated in ANSYS Fluent using user-defined source terms. The sensible thermal module rewrites the near-wall Fourier heat flux...

(This article belongs to the Special Issue Heat and Mass Transfer in Process Engineering: Modern Approaches)
  • Article
  • Open Access
16 Citations
8,133 Views
20 Pages

22 April 2013

This is a study of how indoor temperature settings have changed over time in the United States based on data from the Energy Information Administration’s, Residential Energy Consumption Survey (RECS). It is shown that Americans have moderately raised...

  • Article
  • Open Access
2 Citations
2,506 Views
21 Pages

Integrated Thermal and Metallurgical Simulation Framework for Selective Laser Melting Multi-Component and Multi-Phase Alloys

  • Haohao Kong,
  • Yaqing Hou,
  • Hailong Qin,
  • Jinli Xie and ,
  • Zhongnan Bi and
  • Hang Su
  • + 1 author+ 0 author

24 November 2023

To fully understand the impact of cyclic heating on the solid-state phase transformation behavior (SPTB) of multi-component multi-phase alloys (MCPA) during selective laser melting (SLM) and to provide possibilities for the precise customization of t...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
3 Citations
2,552 Views
16 Pages

Performance Analysis of Loose-Fill Thermal Insulation from Wood Scobs Coated with Liquid Glass, Tung Oil, and Expandable Graphite Mixture

  • Nerijus Augaitis,
  • Jurga Šeputytė-Jucikė,
  • Sylwia Członka,
  • Arūnas Kremensas and ,
  • Agnė Kairytė,
  • Sigitas Vėjelis,
  • Giedrius Balčiūnas and
  • Saulius Vaitkus
  • + 3 authors+ 0 author

24 April 2023

The current study presents the results of monitoring the behavior of loose-fill thermal insulating material for buildings made of wood scobs (WS), which were coated with one, two, and three component-based coatings from liquid glass (LG), tung oil (T...

  • Article
  • Open Access
10 Citations
4,201 Views
15 Pages

20 April 2022

Rock spectral analysis is an important research field in hyperspectral remote sensing information processing. Compared with the spectra in the short-wave infrared and visible–near-infrared regions, the emittance spectrum of rocks in the thermal...

(This article belongs to the Special Issue Mapping of Rocks and Minerals Using Hyperspectral Remote Sensing)
  • Feature Paper
  • Article
  • Open Access
31 Citations
8,179 Views
59 Pages

Principles of Machine Learning and Its Application to Thermal Barrier Coatings

  • Yuan Liu,
  • Kuiying Chen,
  • Amarnath Kumar and
  • Prakash Patnaik

23 June 2023

Artificial intelligence (AI), machine learning (ML) and deep learning (DL) along with big data (BD) management are currently viable approaches that can significantly help gas turbine components’ design and development. Optimizing microstructure...

(This article belongs to the Special Issue Advances in Thermal Barrier Coatings (TBCs): Materials, Fabrication, Corrosion and Applications)
  • Article
  • Open Access
3 Citations
1,404 Views
19 Pages

18 August 2025

Rolling contact fatigue (RCF)-induced cracks in steel rails exhibit a fish-scale-shaped cluster distribution, and generally form in a layered, overlapping manner. Eddy-current-pulsed thermography (ECPT) has been applied in RCF detection by taking adv...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
36 Citations
8,830 Views
12 Pages

24 December 2015

This study investigated the diurnal thermal behavior of several urban surfaces and landscape components, including pavements, vegetation, and a water pond. The field experiment was conducted in a university campus of Guangzhou, South China, which is...

(This article belongs to the Special Issue Sustainable Buildings: Design for Comfort and Users)
  • Article
  • Open Access
48 Citations
6,821 Views
11 Pages

28 December 2020

The effects of pulsed electric field (PEF) treatments on microbial reduction, volatile composition, and sensory characteristics of orange juice were investigated. Mild (Thermal-1) and intensive (Thermal-2) thermal treatments were applied for comparis...

(This article belongs to the Special Issue Novel Thermal and Nonthermal Food Processing Technologies)
  • Article
  • Open Access
10 Citations
2,983 Views
18 Pages

29 October 2021

In Europe there are nearly 500 incinerators. There are over 2000 of them in the world. It is estimated that the combustion of 1 ton (Mg) of waste produces about 250–300 kg of slag. Due to the large amounts of this waste, the construction industry’s d...

(This article belongs to the Special Issue Low Carbon Cements)
  • Article
  • Open Access
8 Citations
2,219 Views
19 Pages

Simulation and Study of Manufacturing of W–Cu Functionally Graded Materials by a Selective Laser Melting Process

  • Xiaoyu Ding,
  • Di Ma,
  • Yuecheng Fu,
  • Laima Luo and ,
  • Yucheng Wu and
  • Jianhua Yao
  • + 1 author+ 0 author

11 December 2024

Plasma-facing components (PFCs) were simulated by ANSYS, and the influence of gradient layer number and composition distribution index on the distribution of temperature field and stress field was analyzed. The simulation results show that a gradient...

  • Review
  • Open Access
1 Citations
2,717 Views
35 Pages

8 January 2026

The paper provides a comprehensive overview of stray losses in conductive structural parts of power transformers, addressing the effects of stray magnetic fields on simple conductive plates, the distribution of additional losses across structural com...

(This article belongs to the Special Issue Design and Production Process Optimization for High Performance and Energy Efficiency in Electrical Machines—2nd Edition)
  • Article
  • Open Access
28 Citations
5,368 Views
14 Pages

Thermal Decomposition Properties of Epoxy Resin in SF6/N2 Mixture

  • Hao Wen,
  • Xiaoxing Zhang,
  • Rong Xia,
  • Zilai Yang and
  • Yunjian Wu

26 December 2018

As a promising alternative for pure SF6, the mixture of SF6/N2 appears to be more economic and environment-friendly on the premise of maintaining similar dielectric properties with pure SF6. But less attention has been paid to the thermal properties...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
6 Citations
4,064 Views
13 Pages

A Composite Magnetosensitive Sorbent Based on the Expanded Graphite for the Clean-Up of Oil Spills: Synthesis and Structural Properties

  • Vadim M. Kadoshnikov,
  • Tetyana I. Melnychenko,
  • Oksana M. Arkhipenko,
  • Danylo H. Tutskyi and ,
  • Volodymyr O. Komarov,
  • Leonid A. Bulavin and
  • Yuriy L. Zabulonov
  • + 2 authors+ 0 author

12 April 2023

Oil spills necessitate the development of effective methods for preventing their damaging effects on the environment. A number of physical, chemical, thermal, and biological methods are used to combat oil spills. Among them, sorption is considered to...

(This article belongs to the Special Issue Carbons for Health and Environmental Protection)
  • Article
  • Open Access
2 Citations
2,629 Views
20 Pages

Strategic Integration of a Vegetative Component on a Metal Roof Base: An Evaluation of Its Impacts on Thermal and Acoustic Performance in the Tropics

  • Siew Bee Aw,
  • Pau Chung Leng,
  • Gabriel Hoh Teck Ling,
  • Keng Yinn Wong and ,
  • Mohamed Rohaizad Mohamed Anuar,
  • Ismail Wajdi Mohd Rokhibi,
  • Cheah Haur Ng,
  • Nathan Hui Kai Law and
  • Santa Ying Zi Goh
  • + 4 authors+ 0 author

This paper attempts to ascertain the thermal and acoustic impacts of introducing a vegetative roof layer on insulated and uninsulated metal roofs for tropical climates, through field measurements in Skudai, Johor, Malaysia, that were conducted for bo...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
4 Citations
3,362 Views
15 Pages

16 December 2023

This study explored and developed high-resolution infrared thermal (HRIT) imaging for screening toddler’s fractures. A toddler’s fracture is a common tibial fracture in children younger than six years old. The study included 39 participan...

(This article belongs to the Special Issue Recent Progress in Infrared Thermography)
  • Article
  • Open Access
23 Citations
8,643 Views
21 Pages

8 May 2015

Soil and vegetation component temperatures in non-isothermal pixels encapsulate more physical meaning and are more applicable than composite temperatures. The component temperatures however are difficult to be obtained from thermal infrared (TIR) rem...

(This article belongs to the Special Issue The Development and Validation of Remote Sensing Products for Terrestrial, Hydrological, and Ecological Applications at the Regional Scale)

of 167