- Article
A novel energetic material, Bifurazano [3,4-b: 3′,4′-f] furoxano [3″,4″-d] oxacyclo-heptatriene (BFFO), has been investigated regarding two aspects, namely its thermal decomposition and solidification characteristics. The DSC...
A novel energetic material, Bifurazano [3,4-b: 3′,4′-f] furoxano [3″,4″-d] oxacyclo-heptatriene (BFFO), has been investigated regarding two aspects, namely its thermal decomposition and solidification characteristics. The DSC...
Phase change materials (PCMs) have significant potential for utilization due to their high energy storage density and excellent safety in energy storage. In this research, a flexible heat storage device using the stable supercooling of sodium acetate...
The solidification characteristics of 70 steel at the stage of the superheat elimination and the liquid–solid phase transformation were analyzed at cooling rates from 10 to 150 °C/min based on a high-temperature confocal scanning laser microscope (HT...
This research examines the weldment characteristics and mechanical properties of lap joints of SUS316L/SUS425 stainless steels using resistance spot welding under variable weld currents and welding times. The weld current was varied between 7.0, 8.5,...
In this paper, the finite element software ProCAST version 14.5 was used to simulate the temperature field, flow field and defect prediction in the filling and solidification process of hypereutectic high-chromium cast iron. The effects of pouring te...
To better control the Inconel617 electron beam cladding solidification process, a three-dimensional temperature field model was built to simulate the temperature gradient, cooling rate, and solidification rate in the solidification process and take a...
In the laser powder bed fusion process, the melting-solidification characteristics of 316L stainless steel have a great effect on the workpiece quality. In this paper, a multi-physics model was constructed using the finite volume method (FVM) to simu...
Heavy metals in flue gas desulfurization (FGD) gypsum from coal-fired power plants are at risk of releaching during the processes of stockpiling and resource utilization. In this study, the effects of organosulfur chelators dithiocarbamate (DTC) and...
Stabilization/solidification (S/S) is a crucial technology for the engineering reuse of oil-contaminated soil. A key challenge, however, is preventing the migration of residual oil under varying hydraulic conditions. This study investigates the effic...
A series of resorcinol–formaldehyde resins (RFR) samples for Cs-137 removal from liquid alkaline media have been synthesized. It has been demonstrated that the chemical stability as well as sorption characteristics are determined by the resorci...
The disposal and reutilization of the enormous amounts of slurry-like mud (MS) dredged from navigation channel construction, ecological dredging, and other construction activities have been receiving increasing attention. In this paper, a flocculatio...
As an important mechanical property, tensile behavior has been regarded as an indicator for the creep and thermal mechanical fatigue properties of Ni-based superalloys. The tensile property of Ni-based superalloys is closely related to the amount, si...
The hot cracking behaviors of Mg-5Zn-xEr (x = 0.83, 1.25, 2.5, 5 wt.%) alloys are investigated by optimized hot cracking experimental apparatus, optical microscope, and scanning electron microscope, such as contraction behaviors, feeding behaviors, a...
River sludge usually contains a high content of organic matter, leading to its low strength or difficult solidification in its solidification/stabilization (S/S) treatment projects. This study selected river sludge with medium and high content of org...
8 February 2020
The solidification/stabilization (S/S) method is the usual technique for the remediation of soils polluted by heavy metal in recent years. However, freeze–thaw cycles, an important physical process producing weathering of materials, will affect...
The flow and solidification inside the mould are crucial to the quality of the casting billet during continuous casting. In this work, a three-dimensional coupled model of flow and solidification was established, and the flow field and temperature di...
The aim of this article is to reduce the environmental harm caused by industrial solid waste, specifically tannery sludge, and enable its reutilization. This study prepared an alkali-activated tannery sludge–slag solidification product (ATSSP)...
Fly ash (FA) usually causes air and soil pollution due to wind erosion. However, most FA field surface stabilization technologies have long construction periods, poor curing effects, and secondary pollution. Therefore, there is an urgent need to deve...
Modification of the eutectic silicon in Al–Si alloys causes a structural transformation of the silicon phase from a needle-like to a fine fibrous morphology and is carried out extensively in the industry to improve mechanical properties of the...
Phase change material (PCM) based thermal energy storage (TES) is an important solution to the waste of heat and intermittency of new energy sources. However, the thermal conductivity of most PCMs is low, which severely affects the thermal energy sto...
Manganese slag is a kind of industrial waste produced by electrolytic production of manganese metal. The traditional method of stacking manganese slag not only causes waste of resources, but also produces environmental pollution. Finding harmless, ef...
River and lake dredging projects inevitably produce significant quantities of wastewater and sediment. This accumulation results in dredged soil with high moisture content, characterized by low strength, rendering it unsustainable for use. To facilit...
The secondary dendrite arm spacing (SDAS) is a critical microstructural parameter that directly influences the local mechanical performance of Al–Si casting alloys. Although the power-law relationship between cooling rate and SDAS is widely ack...
This study systematically investigated the effects of Co/Ni ratios (0.6–2.0) on the solidification behavior, as-cast microstructure, and element segregation of Co-Al-W-based superalloys, and elucidated the mechanism of thermodynamic and kinetic...
5 September 2022
With the rapid development of industry, the disposal of industrial solid waste needs to be solved urgently in China. Thus, an effective disposal method should be proposed to recycle these solid wastes in an environmentally friendly and sustainable ma...
In this study, 27SiMn was selected as a substrate, and the powder was a self-made iron-based alloy. Further, the thermophysical properties of the material were predicted by the CALPHAD phase diagram algorithm. In order to verify the accuracy of the n...
Super sulfate cement (SSC) serves as a sustainable alternative to ordinary Portland cement, offering lower carbon emissions and superior performance. Magnesium oxide (MgO) and building gypsum (BG) were utilized as activators for granulated blast furn...
In this study, a transient viscosity adjustment method using a coaxial nozzle was explored to fabricate nanofibers from non-spinnable m-poly(hydroxyamide) (m-PHA). Unlike conventional electrospinning methods that often require additives to induce fib...
The safe and efficient capture of CO2 in confined environments such as coal mine goafs remains a significant challenge, posing both environmental and safety risks. To address this issue, this study developed a novel biomass-based aerogel adsorbent us...
This study investigates the combustion characteristics and ash behavior of coal–biomass co-combustion using Zhujixi coal and corn straw in a fixed-bed system. The research analyzes combustion stage division, gas release patterns, and mineral ev...
The effect of ultrasonic vibration on the fluidity and microstructure of cast aluminum alloys (AlSi9 and AlSi18 alloys) with different solidification characteristics was investigated. The results show that ultrasonic vibration can affect the fluidity...
The solidification structure characteristics are decisive for the production of extra-thick slabs. This study developed a solidification heat transfer model and a cellular automaton–finite element coupled model to investigate the solidification...
This study aimed to suggest a solidification map based on the solidification parameters G and R of each layer in the multilayer deposition for the investigation of heat accumulation on the deposit. Through the solidification map, the appropriate soli...
In this study, the formation mechanism of sliver defects in C-shaped 2D grain selectors during investment casting of single-crystal superalloy was investigated by analyzing the effects of the C-shaped 2D grain selectors on the solidification behavior...
The phase fraction plays a critical role in determining the solidification characteristics of metallic alloys. In this study, we propose a novel method (fs = (t − tl)/(ts − tl)) for estimating the phase fraction based on the solidificatio...
The solidification processes of two compositions, hypereutectic (21.0 mol% Y2O3–79.0 mol% Al2O3) and eutectic (18.5 mol% Y2O3–81.5 mol% Al2O3), were used via the horizontal directional solidification (HDS) method to produce two ingots wit...
A novel solution approach is proposed for the numerical simulation of the solidification process of binary Al-Si hypoeutectic alloys during upward and downward solidification modes. Undercooling is always observed during solidification, but the pheno...
Dissimilar welds close to the fusion boundary exhibit a variety of solidification microstructures that strongly impact their service behavior. Investigations were therefore undertaken to clarify the origins of the morphological and microstructural ev...
The ability to achieve a predictable solidification microstructure would greatly accelerate the qualification of the additive manufacturing process. Solidification microstructure control is a challenging issue for the additive manufacturing of metall...
The Compact Strip Production (CSP) process is the latest version of thin-slab continuous casting, combining both casting and rolling, thus improving the CSP process’s energy efficiency and the strip quality. Modeling the combined phenomena of f...
The solidification and micro- and macro-segregation behaviors of as-cast INCONEL 718 (IN718) alloy at different temperatures under a slow cooling rate (5 °C/min) were investigated in this study. The results indicate that the solid-liquid interfac...
Solidification cracking is a major obstacle when joining dissimilar alloys using additive manufacturing. In this work, location-specific solidification cracking susceptibility has been investigated using an integrated computational materials engineer...
Understanding the rapid solidification behavior characteristics, nucleation undercooling, and nucleation mechanism is important for modifying the microstructures and properties of metal alloys. In order to investigate the rapid solidification behavio...
The solidification cooling curve itself as well as its first derivative, and related temperatures, reported to the calculated equilibrium temperatures in stable and metastable solidification systems, are used to predict the solidification characteris...
During the solidification process, microstructures are affected by the experimental conditions, the thermophysical characteristics of the alloy, and the type of grain-refining particles. Unidirectional solidification experiments were performed in a v...
Microbial-induced carbonate precipitation (MICP) has outstanding characteristics in solidifying soil, such as good fluidity, ecological environmental protection, adjustable reaction, etc., making it have a good application prospect. As a typical silt...
Centrifugal spray deposition forming technology, which is used in the preparation process of near-net-forming billets, not only reduces the macroscopic segregation and refines the microstructures of billets but also has the characteristics of a rapid...
The Effect of the solidification conditions and subsequent extrusion of a Mg-3.0Zn-0.5Y (at. %) alloy containing quasicrystalline icosahedral (i-) phase was studied. Solidification was carried out by three methods using a chill casting mold, a conven...
Ductile iron casting production is strongly affected by austenite and graphite distribution obtained after the solidification process. At the same time it is accepted that solidification behavior can be considered as hypo-, hyper- or eutectic dependi...
Shrinkage greatly influences the mechanical and fatigue properties of compacted graphite iron and it is necessary in order to study the causes of shrinkage in compacted graphite iron and to predict it effectively. In this paper, a kind of cylindrical...
of 9