Skip to Content

103 Results Found

  • Article
  • Open Access
1,181 Views
16 Pages

7 February 2026

After a shear-type strongly braced steel frame suffers from non-sway buckling, the effective length factor for columns in a non-sway frame should be selected for stability calculations, and the P-δ effect should be considered for second-order a...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
6 Citations
5,246 Views
15 Pages

Simplified Pushover Analysis for Rapid Assessment of Shear-Type Frames

  • Raihan Rahmat Rabi,
  • Marco Vailati and
  • Giorgio Monti

9 December 2021

A simplified pushover method for rapidly assessing the seismic capacity of shear-type frames is presented. The frame global force-displacement capacity is described as a trilinear curve passing through three limit states (LS): Damage LS (DLS), Life s...

(This article belongs to the Special Issue Advances in Building Materials and Concrete)
  • Article
  • Open Access
24 Citations
6,726 Views
19 Pages

22 November 2017

Shear connectors are used in steel beam–concrete slabs of composite frame and bridge structures to transfer shear force according to design loads. The existing Y-type perfobond rib shear connectors are designed for girder slabs of composite bridges....

  • Article
  • Open Access
30 Citations
4,578 Views
16 Pages

Shear and Bending Performances of Reinforced Concrete Beams with Different Sizes of Circular Openings

  • Yasin Onuralp Özkılıç,
  • Ceyhun Aksoylu,
  • Ibrahim Y. Hakeem,
  • Nebi Özdöner and ,
  • İlker Kalkan,
  • Memduh Karalar,
  • Sergey A. Stel’makh,
  • Evgenii M. Shcherban’ and
  • Alexey N. Beskopylny
  • + 4 authors+ 0 author

4 August 2023

The present study pertains to the effects of transverse opening diameters and shear reinforcement ratios on the shear and flexural behavior of RC beams with two web openings across different spans, i.e., a single opening in each half-span. Within the...

(This article belongs to the Special Issue Mechanical Performance of Steel and Composite Beams)
  • Article
  • Open Access
10 Citations
4,309 Views
15 Pages

The Effect of Lateral Load Type on Shear Lag of Concrete Tubular Structures with Different Plan Geometries

  • Mostafa Moghadasi,
  • Soheil Taeepoor,
  • Seyed Saeid Rahimian Koloor and
  • Michal Petrů

3 October 2020

Tubular structures are extensively recognized as a high efficiency and economically reasonable structural system for the design and construction of skyscrapers. The periphery of the building plan in a tubular system consists of closely spaced columns...

(This article belongs to the Special Issue Properties and Performance of Concrete Materials and Structures)
  • Article
  • Open Access
2 Citations
2,374 Views
16 Pages

2 February 2022

Structural damage identification has become an important topic in the field of civil engineering in recent years. The shear-type structure, such as shear frame structure, is a common type used in civil engineering. In this paper, a damage identificat...

(This article belongs to the Special Issue Damage and Fracture of Composites)
  • Article
  • Open Access
7 Citations
3,669 Views
25 Pages

18 September 2021

Substructure shake table testing (SSTT) is an advanced experimental technique that is suitable for investigating the vibration control of secondary structure-type dampers such as tuned mass dampers (TMDs). The primary structure and damper are conside...

(This article belongs to the Special Issue Symmetry in Structural Health Monitoring)
  • Article
  • Open Access
4 Citations
2,850 Views
22 Pages

Automated Modal Analysis Using Stochastic Subspace Identification and Field Monitoring Data

  • Shieh-Kung Huang,
  • Zong-Zhi Lai,
  • Hoong-Pin Lee and
  • Yen-Yu Yang

11 July 2025

The accurate identification of modal parameters is essential for structural health monitoring (SHM), as it provides critical insights into the presence of damage or degradation within the structure. A promising technique, stochastic subspace identifi...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
6 Citations
5,135 Views
21 Pages

Design of a Biaxial Laminar Shear Box for 1g Shaking Table Tests

  • Francesco Castelli,
  • Salvatore Grasso,
  • Valentina Lentini and
  • Maria Stella Vanessa Sammito

In this paper, the design of a new laminar shear box at the Laboratory of Earthquake Engineering and Dynamic Analysis (L.E.D.A.) of the University of Enna “Kore” (Sicily, Italy), is presented. The laminar box has been developed to investi...

(This article belongs to the Topic Support Theory and Technology of Geotechnical Engineering)
  • Article
  • Open Access
489 Views
25 Pages

14 August 2026

To systematically investigate the effects of C-shaped and rectangular steel frames on the seismic performance of assembled composite shear walls, this paper, based on the validation of existing pseudo-static test results, employs ABAQUS software to e...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
5 Citations
4,502 Views
31 Pages

Medium-rise reinforced concrete (RC) framed apartment complexes with stories ranging from 15 to 50 are becoming more common in Ethiopia’s main cities. In these RC-framed structures, shear walls are included for lateral load resistance. As apert...

(This article belongs to the Special Issue Selected Papers from the 45th Australasian Universities Building Education Association (AUBEA 2022))
  • Article
  • Open Access
748 Views
24 Pages

Effect of Different Infill Types on the Cyclic Behavior of Steel Plate Shear Walls

  • Mohammed M. Elgiar,
  • Alaa A. Elsisi,
  • Hassan M. Maaly and
  • Osman Shallan

12 January 2026

The steel plate shear wall (SPSW) is a prevalent lateral load-resisting system in high-rise steel buildings. Comprising a boundary frame and an infill plate, its performance is the focus of this study. This work aims to investigate the effects of dif...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
828 Views
26 Pages

9 December 2025

Installing shear walls in a load-bearing system is one of the most rational, economical, and effective strengthening methods for improving a building system that is vulnerable to seismic effects. One of the most significant points to consider in a re...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
10 Citations
3,014 Views
21 Pages

Seismic Performance of Eccentrical Braced Frame Retrofitted by Box Damper in Vertical Links

  • Fei Miao,
  • Faezeh Nejati,
  • Sulima Ahmed Mohammed Zubair and
  • Mona Elmahi Yassin

22 September 2022

Passive control methods reduced the vulnerability of structures to earthquakes by decreasing the seismic demand and improving structural plasticity. One of the passive control systems is the eccentrically braced frame with a vertical shear link (V-EB...

(This article belongs to the Special Issue Intelligent Multi-Criteria Decision-Making Methodologies in Building and Construction Management)
  • Article
  • Open Access
2 Citations
2,336 Views
24 Pages

29 January 2025

Accurate modeling of the hysteretic behavior of reinforced concrete columns with non-seismic detailing is crucial for assessing the seismic performance of reinforced concrete structures. While shear spring models are commonly used to capture nonlinea...

(This article belongs to the Special Issue Structural Analysis and Seismic Resilience in Civil Engineering)
  • Article
  • Open Access
3,546 Views
19 Pages

27 February 2025

As a result of the 2017 Pohang earthquake, numerous piloti-type structures incurred damage, and the cause was attributed to the wide spacing of transverse reinforcement. Improper spacing of transverse reinforcement can lead to brittle failure of colu...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
19 Citations
5,081 Views
17 Pages

5 March 2020

The article presents experimental tests of a new type of composite bar that has been used as shear reinforcement for concrete beams. In the case of shearing concrete beams reinforced with steel stirrups, according to the theory of plasticity, the pla...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering)
  • Article
  • Open Access
8 Citations
4,228 Views
26 Pages

Seismic Performance Assessments of RC Frame Structures Strengthened by External Precast Wall Panel

  • Seung-Ho Choi,
  • Jin-Ha Hwang,
  • Sun-Jin Han,
  • Hyo-Eun Joo and ,
  • Hyun-Do Yun and
  • Kang Su Kim
  • + 1 author+ 0 author

4 March 2020

In recent years, a variety of strengthening methods have been developed to improve the seismic performance of reinforced concrete (RC) frame structures with non-seismic details. In this regard, this study proposes a new type of seismic strengthening...

(This article belongs to the Special Issue Structural Performances of Concrete Composite Members: Experimental, Theoretical, Numerical Approaches)
  • Article
  • Open Access
2 Citations
3,786 Views
14 Pages

Analysis Behavior of Openings on Full-Size Cross-Laminated Timber (CLT) Frame Shear Walls Tested Monotonically

  • Rudi Dungani,
  • Sulistyono,
  • Tati Karliati,
  • Yoyo Suhaya and ,
  • Jamaludin Malik,
  • Alpian and
  • Wahyu Supriyati
  • + 2 authors+ 0 author

4 January 2023

Walls, as components of the lateral-force-resisting system of a building, are defined as shear walls. This study aims to determine the behavior of shear wall panel cross-laminated-timber-based mangium wood (Acacia mangium Willd) (CLT-mangium) in eart...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
13 Citations
4,226 Views
22 Pages

5 November 2019

Experiments were performed on four specimens of steel frames with infilled recycled aggregate concrete shear walls (SFIRACSWs), one specimen of infilled ordinary concrete wall, and one pure-steel frame were conducted under horizontal low cyclic loadi...

(This article belongs to the Special Issue Green Concrete for a Better Sustainable Environment)
  • Article
  • Open Access
16 Citations
5,882 Views
27 Pages

4 March 2019

A steel plate shear wall often uses partially encased composite (PEC) columns instead of edge frame columns. Such a steel plate shear wall not only bears the gravity load of the structure and resists the bending moment caused by lateral force by taki...

(This article belongs to the Special Issue Structural Damage Detection and Health Monitoring)
  • Article
  • Open Access
21 Citations
5,982 Views
19 Pages

13 May 2021

This paper aims to provide a preliminary assessment of polyurethane adhesive applicability as an alternative to conventional cement-based adhesives used to fix thermal insulation materials to substrates concerning mineral wool-based external thermal...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering (2nd Edition))
  • Article
  • Open Access
3,191 Views
20 Pages

18 January 2023

In order to expand the applications of cold-formed thin-walled steel structures, this study proposes a new type of composite wallboard composed of cold-formed thin-walled C-shaped steel and multi-layer concrete, in which C-shaped steel serves as the...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
6 Citations
3,262 Views
14 Pages

Effect of Clutter Filter in High-Frame-Rate Ultrasonic Backscatter Coefficient Analysis

  • Masaaki Omura,
  • Kunimasa Yagi,
  • Ryo Nagaoka,
  • Kenji Yoshida and ,
  • Tadashi Yamaguchi and
  • Hideyuki Hasegawa
  • + 1 author+ 0 author

27 February 2023

High-frame-rate imaging with a clutter filter can clearly visualize blood flow signals and provide more efficient discrimination with tissue signals. In vitro studies using clutter-less phantom and high-frequency ultrasound suggested a possibility of...

(This article belongs to the Section Biomedical Sensors)
  • Article
  • Open Access
6 Citations
17,163 Views
30 Pages

28 June 2012

A key element in the seismic load resisting system of a wood framed structure is the shear wall which is typically sheathed on one side with plywood or oriented strand board (OSB) and gypsum on the other. The shear capacity of gypsum sheathed shear w...

(This article belongs to the Special Issue Earthquake Resistant Buildings)
  • Article
  • Open Access
4 Citations
5,946 Views
23 Pages

14 June 2021

Large span concrete bridges with a box-shaped girder are usually built from prefabricated concrete segments or by in-situ casting of the concrete on a scaffolding system. Both technologies have their advantages and drawbacks. Recently a new approach...

(This article belongs to the Special Issue Recent Advances in Testing and Modelling Reinforced Concrete Structures)
  • Article
  • Open Access
8 Citations
2,456 Views
25 Pages

Research on Dynamic Characteristics of Joint of RC Frame Structure with NES

  • Haixu Yang,
  • Baolei Yang,
  • Haibiao Wang,
  • Maohua Zhang and
  • Songyuan Ni

7 September 2022

The NES (nonlinear energy sink) is a new type of nonlinear tuned mass damper that is connected to the shock-absorbing main structure through strong nonlinear stiffness and viscous damping. The vibrational energy in the main structure is transferred t...

  • Article
  • Open Access
14 Citations
3,068 Views
20 Pages

29 May 2023

Structural pounding between adjoining multistory buildings with different total heights and different story levels has been repeatedly identified as a frequent cause of severe damage during seismic excitations. This phenomenon is very intense when up...

(This article belongs to the Special Issue Feature Papers in CivilEng)
  • Article
  • Open Access
5 Citations
2,590 Views
17 Pages

18 June 2022

The corrugated steel plate shear wall (CoSPSW) is a new type of steel plate shear wall, in which corrugated wall plates instead of flat wall plates are adopted. The lateral stiffness and shear buckling capacity of the shear wall system could be signi...

(This article belongs to the Special Issue Modelling, Test and Practice of Steel Structures)
  • Article
  • Open Access
17 Citations
7,748 Views
18 Pages

To study the influence of masonry infill walls on the hysteretic performance of reinforced concrete frames, a cyclic experiment was conducted for three two-story and two-span reinforced concrete frame structures, including one reinforced concrete fra...

(This article belongs to the Collection Structural Analysis for Earthquake-Resistant Design of Buildings)
  • Article
  • Open Access
6 Citations
2,288 Views
23 Pages

17 October 2025

This study quantifies the influence of soil–structure interaction (SSI) on key parameters of performance-based seismic design (PBSD) for steel moment-resisting frames. Specifically, PBSD is extended as a methodology in which explicit structural...

(This article belongs to the Special Issue Performance-Based Seismic Design, Structural Health Monitoring, and Deformation Prediction for Building Structures)
  • Article
  • Open Access
4 Citations
3,463 Views
17 Pages

26 January 2023

The corrugated steel plate shear wall (CSPSW) has high strength, ductility, and energy dissipation capacity and can be used as the lateral force-resisting system of multi-story and high-rise buildings. The vertical load transmitted by the upper floor...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
6 Citations
1,891 Views
23 Pages

27 February 2025

This study analyses the many different parameters of the in-plane flexibility problem regarding the lateral behaviour of light timber-framed (LTF) wall elements with different types of sheathing material (FPB, OSB, or even reinforced concrete), as we...

(This article belongs to the Special Issue Advances and Applications in Timber Structures)
  • Article
  • Open Access
3 Citations
2,356 Views
13 Pages

Biaxial Resistance of Pre-Engineered Beam Hangers in Glulam

  • Houman Ganjali,
  • Fei Tong and
  • Thomas Tannert

30 January 2025

In timber construction, Glulam post-and-beam systems are commonly used to transfer vertical loads to the foundation. In such systems, the connections play a critical role in structural performance. Pre-engineered connectors, which facilitate fast and...

(This article belongs to the Special Issue Advances and Applications in Timber Structures)
  • Article
  • Open Access
4 Citations
2,144 Views
19 Pages

Sensitivity Analysis of Modal Parameters of an RC Joint Subject to Progressive Damage under Cyclic Loads

  • Amedeo Gregori,
  • Lorenzo Bizzarri,
  • Caterina D’Agostino,
  • Angelo Aloisio and ,
  • Riccardo Cirella and
  • Rocco Alaggio
  • + 1 author+ 0 author

This paper presents the results of an experimental study that focused on the gradual modification of the modal parameters of reinforced concrete beam–column frames subjected to progressive damage under cyclic loading. As is commonly found in st...

(This article belongs to the Collection Structural Dynamics and Analysis of Civil Structures and Engineering Materials)
  • Article
  • Open Access
11 Citations
4,369 Views
26 Pages

Effects of Soil–Structure Interaction on the Seismic Response of RC Frame–Shear Wall Building Structures Under Far-Field Long-Period Ground Motions

  • Ke Yang,
  • Pengrong Cai,
  • Zixuan Zhang,
  • Qinglin Hou and ,
  • Ruige Zheng,
  • Bin Hao and
  • Bo Wang
  • + 2 authors+ 0 author

27 November 2024

This paper focuses on the effect of soil–structure interaction (SSI) on the seismic response of high-rise RC frame–shear wall structures under far-field long-period ground motions. Elastic–plastic time–history analyses were pe...

(This article belongs to the Special Issue Seismic Analysis and Design of Building Structures)
  • Article
  • Open Access
16 Citations
5,067 Views
27 Pages

Progressive Collapse Behavior of a Precast Reinforced Concrete Frame System with Layered Beams

  • Vitaly I. Kolchunov,
  • Natalia V. Fedorova,
  • Sergei Y. Savin and
  • Pavel A. Kaydas

A possible way to improve the structural safety and robustness of precast building structures is to develop effective precast frame systems with layered beams, which combine prefabricated parts with cast-in situ ordinary concrete, high-performance co...

(This article belongs to the Special Issue Safety and Optimization of Building Structures—2nd Edition)
  • Article
  • Open Access
2 Citations
5,359 Views
14 Pages

The load-carrying capacities of welded joints need to be paid attention to in the design of the frame, which transfers the thrust generated by the rocket engine to the rocket body. A load-carrying capacity evaluation method of welded joints based on...

  • Article
  • Open Access
5 Citations
3,297 Views
20 Pages

In the seismic design of steel moment-resisting frames (MRFs), the panel zone region can significantly affect overall ductility and energy-dissipation capacity. This study investigates the influence of panel zone flexibility on the seismic response o...

  • Feature Paper
  • Article
  • Open Access
17 Citations
4,278 Views
16 Pages

Dynamic Response Parameter Analysis of Steel Frame Joints under Blast Loading

  • Suxia Kou,
  • Xiuhua Zhang,
  • Wancheng Li and
  • Chunlei Song

A finite element model of steel frame joints is established using finite element analysis software ANSYS/LS-DYNA. The ideal triangular impact load is used to numerically analyze the dynamic response of steel frame welded joints under blast loading, t...

(This article belongs to the Special Issue Dynamic Response of Structures)
  • Article
  • Open Access
1 Citations
1,145 Views
23 Pages

27 June 2025

To address the challenges of slow construction and high self-weight in steel–concrete composite floors for rural light steel frame structures in China, a new prefabricated floor system was developed. This system features prefabricated slabs mad...

(This article belongs to the Special Issue Advances in Modern Structural Engineering: From Materials to Building Structures)
  • Article
  • Open Access
7 Citations
4,572 Views
25 Pages

Research on Seismic Performance of Frame Structure with Beam Staircases

  • Ming Wen,
  • Hongxiang Tian,
  • Weiwei Wang,
  • Baokui Chen and
  • Huayao Fu

Beam staircases are widely used in frame structures. In structural design, stair flights are often ignored in the model establishment, and their loads are only added to the stair beams. However, under a seismic load, the flight of stairs will increas...

(This article belongs to the Special Issue Structural Health Monitoring)
  • Article
  • Open Access
20 Citations
9,343 Views
18 Pages

Effect of Lintel Beam on Seismic Response of Reinforced Concrete Buildings with Semi-Interlocked and Unreinforced Brick Masonry Infills

  • Mangeshkumar R. Shendkar,
  • Denise-Penelope N. Kontoni,
  • Sasankasekhar Mandal,
  • Pabitra Ranjan Maiti and
  • Dipendra Gautam

The primary focus of this study is to evaluate the nonlinear response of reinforced concrete (RC) frames with two types of brick infills viz., unreinforced brick masonry infill (URM) and semi-interlocked brick masonry infill (SIM) together with linte...

(This article belongs to the Special Issue Advances in Structural Dynamics and Earthquake Engineering)
  • Article
  • Open Access
6 Citations
10,711 Views
24 Pages

31 July 2014

Structural Insulated Panel (SIP) wall systems have been used in residential and light commercial buildings for the past sixty years. Lack of sufficient published research on racking load performance and limited understanding of the influence of faste...

(This article belongs to the Special Issue Seismic-Resistant Building Design)
  • Article
  • Open Access
4 Citations
2,206 Views
25 Pages

28 August 2023

This paper presents numerical investigations of the shear performance of vertically corrugated steel plate shear walls (CvSPSWs) with inelastic buckling of infilled plates under lateral loads. A numerical model was developed and verified by an experi...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
3,127 Views
24 Pages

Effect of the Distribution of Mass and Structural Member Discretization on the Seismic Response of Steel Buildings

  • Federico Valenzuela-Beltrán,
  • Mario D. Llanes-Tizoc,
  • Edén Bojórquez,
  • Juan Bojórquez and ,
  • Robespierre Chávez,
  • Jesus Martin Leal-Graciano,
  • Juan A. Serrano and
  • Alfredo Reyes-Salazar
  • + 3 authors+ 0 author

3 January 2022

The response of steel moment frames is estimated by first considering that the mass matrix is the concentrated type (ML) and then consistent type (MC). The effect of considering more than one element per beam is also evaluated. Low-, mid- and high-ri...

(This article belongs to the Topic Advances in Dynamics of Building Structures)
  • Article
  • Open Access
6 Citations
3,012 Views
17 Pages

Post-Fire Seismic Performance of Concrete-Filled Steel Tube Frame Structures Considering Soil-Structure Interaction (SSI)

  • Weiwei Wang,
  • Xuetao Lyu,
  • Jun Zheng,
  • Shanchang Yi and ,
  • Jiehong Li and
  • Yang Yu
  • + 1 author+ 0 author

19 February 2024

Currently, reinforced thin-walled irregular steel tube concrete frame structures have been applied in engineering, but there are few researches on the seismic performance of this type of structures after fire. The seismic performance of structures af...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
2,270 Views
16 Pages

25 July 2023

This study proposes a new arrangement-tuning method to maximize the potential of tuned mass dampers (TMDs) in decreasing the seismic responses of tall buildings. The method relies on a Grammian-based entropy index with the physical meaning of covaria...

(This article belongs to the Special Issue Concepts of Entropy and Their Applications III)
  • Article
  • Open Access
10 Citations
2,552 Views
23 Pages

27 August 2022

Establishing a restoring force model is a fundamental yet critical task for the analysis of structural responses to earthquakes. Such a model has a substantial impact on the structural analysis results. Composite-shear walls with concealed bracings i...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
173 Views
18 Pages

Non-Linear Behavior of Hollow-Section Short Links in EBF Steel Frames

  • Francesco Monte,
  • Alessia Calandrella,
  • Roberto Tartaglia and
  • Giuseppe Maddaloni

27 October 2026

Eccentrically braced frames are widely adopted in seismic-prone regions due to their elastic and inelastic performance. In these structural systems, seismic energy is dissipated by the link through shear or flexural plastic deformations, depending on...

(This article belongs to the Special Issue Steel Structures: Design, Performance, Detection and Optimization)

of 3