Skip to Content

3,249 Results Found

  • Article
  • Open Access
3 Citations
2,379 Views
12 Pages

21 September 2023

In this study, the phase field method has been used to study the effect of second phase particles with different shapes and different orientations on the grain growth of AZ31 magnesium alloy, after annealing at 350 °C for 100 min. The results sho...

(This article belongs to the Special Issue Phase and Structure Analysis of Alloys and Metal Matrix Composites)
  • Article
  • Open Access
13 Citations
5,375 Views
24 Pages

10 June 2020

As an important fabrication process, annealing treatment is conducted to eliminate distortion in magnesium alloy sheets. Second-phase particles can provide nucleation sites for recrystallization grains, and the basal texture is related to the recryst...

  • Article
  • Open Access
18 Citations
3,384 Views
11 Pages

7 October 2018

Based on the principle of grain refinement caused by the second-phase particles, a phase field model was built to describe the recrystallization process in the ZK60 alloy system with Y added under applied stress between temperatures 573 and 673 K for...

  • Article
  • Open Access
6 Citations
3,024 Views
16 Pages

Estimation of the Critical Value of the Second-Phase Particles in the Microstructure of AZ31 Mg Alloy by Phase-Field Methods

  • Yan Wu,
  • Jinlin Xiong,
  • Qiang Luo,
  • Jibing Chen and ,
  • Rutie Zeng and
  • Shuo Wang
  • + 1 author+ 0 author

22 October 2022

In this study, phase-field models were employed to simulate the effects of second-phase particles (SPPs) on grain growth of the AZ31 Mg alloy, under realistic spatial and temporal scales, at 350 °C, during annealing. The particle sizes ranged fro...

(This article belongs to the Special Issue Additive Manufacturing: Experiments, Simulations and Data-Driven Modelling)
  • Article
  • Open Access
11 Citations
3,672 Views
24 Pages

2 August 2023

Crystal plasticity finite element (CPFEM) modeling of metals that can be age hardened consisting of second phase particles is extensively performed based on representative volume element (RVE) models. The RVE model is generated for ferritic low-carbo...

(This article belongs to the Special Issue Numerical Analysis of Microstructure and Mechanical Properties in Metallic Materials)
  • Article
  • Open Access
11 Citations
2,573 Views
20 Pages

Phase-Field Simulation on the Effect of Second-Phase Particles on Abnormal Growth of Goss Grains in Fe-3%Si Steels

  • Mingtao Wang,
  • Yongkai Xu,
  • Jinlong Hu,
  • Feng Fang and ,
  • Jianfeng Jin,
  • Tao Jia and
  • Qing Peng
  • + 2 authors+ 0 author

23 November 2022

A phase-field model was revised to study the abnormal growth of Goss grains during the annealing process in Fe-3%Si steels, in which the interaction between the second-phase particles and Goss grain boundaries (GBs) was considered. The results indica...

(This article belongs to the Special Issue Mathematical and Computational Modeling for Nanohybrids)
  • Article
  • Open Access
8 Citations
2,667 Views
15 Pages

Systematic First-Principles Investigations of the Nucleation, Growth, and Surface Properties of Al11RE3 Second-Phase Particles in Al-Based Alloys

  • Wei Yin,
  • Yuming Liu,
  • Lan Lin,
  • Yiru Wang and ,
  • Leyi Chen,
  • Zhaoting Li,
  • Honghu Peng,
  • Touwen Fan,
  • Yuanzhi Wu and
  • Dongchu Chen
  • + 7 authors+ 2 authors

4 August 2024

At room temperature, Al alloys have excellent mechanical properties and are widely used in automotive, electronics, aerospace and other fields, but it is difficult to maintain this advantage in the middle and high temperature ranges. To address this...

(This article belongs to the Special Issue Surface Modification, Repairing and Forming of Metallic Materials by Additive Manufacturing)
  • Article
  • Open Access
18 Citations
4,870 Views
17 Pages

Homogenization and Growth Behavior of Second-Phase Particles in a Deformed Zr–Sn–Nb–Fe–Cu–Si–O Alloy

  • Liang-Yu Chen,
  • Peng Sang,
  • Lina Zhang,
  • Dongpo Song and ,
  • Yan-Qiu Chu,
  • Linjiang Chai and
  • Lai-Chang Zhang
  • + 2 authors+ 0 author

25 September 2018

Homogeneous distribution of fine second-phase particles (SPPs) fabricated by cycles of deformation and annealing in zirconium alloys is a critical consideration for the corrosion resistance of fuel claddings. Different deformation degrees of zirconiu...

  • Article
  • Open Access
23 Citations
5,886 Views
15 Pages

31 January 2023

A cellular automata model was established to simulate grain coarsening processes pinned by second-phase particles. The influences of particle coarsening, precipitation, growth and dissolution, which contain complex changes of size and number density...

  • Feature Paper
  • Article
  • Open Access
1 Citations
1,738 Views
16 Pages

30 August 2025

Thought experiments like Maxwell’s Demon or the Smoluchowski–Feynman Ratchet can help in pursuing the microscopic origin of the Second Law of Thermodynamics. Here we present a more sophisticated mechanical system than a ratchet, consistin...

(This article belongs to the Special Issue Modern Perspectives on the Second Law of Thermodynamics and Infodynamics)
  • Article
  • Open Access
36 Citations
12,636 Views
16 Pages

Evaluation of Second-Hand Exposure to Electronic Cigarette Vaping under a Real Scenario: Measurements of Ultrafine Particle Number Concentration and Size Distribution and Comparison with Traditional Tobacco Smoke

  • Jolanda Palmisani,
  • Alessia Di Gilio,
  • Laura Palmieri,
  • Carmelo Abenavoli and ,
  • Marco Famele,
  • Rosa Draisci and
  • Gianluigi de Gennaro
  • + 2 authors+ 0 author

25 November 2019

The present study aims to evaluate the impact of e-cig second-hand aerosol on indoor air quality in terms of ultrafine particles (UFPs) and potential inhalation exposure levels of passive bystanders. E-cig second-hand aerosol characteristics in terms...

(This article belongs to the Special Issue Current Knowledge of E-cigarettes and Heated Tobacco Products)
  • Article
  • Open Access
7 Citations
2,760 Views
15 Pages

The estimation of the state of charge (SOC) in lithium-ion batteries is a crucial aspect of battery management systems, serving as a key indicator of the remaining available capacity. However, the inherent process and measurement noises created durin...

  • Article
  • Open Access
49 Citations
7,638 Views
13 Pages

Drying Kinetics of a Single Biomass Particle Using Fick’s Second Law of Diffusion

  • Jianjun Cai,
  • Lingxia Zhu,
  • Qiuxia Wei,
  • Da Huang and ,
  • Ming Luo and
  • Xingying Tang
  • + 1 author+ 0 author

23 March 2023

Drying has been widely studied as a necessary process in biomass utilization. The steam diffusion law plays an important role in drying kinetics. The drying kinetics of a single biomass particle using Fick’s second law of diffusion was studied...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
6 Citations
2,582 Views
6 Pages

Second-Harmonic Generation in Aggregates of Lithium Niobate Particles Formed upon Suspension Freezing

  • Anton A. Matrokhin,
  • Mikhail A. Shevchenko,
  • Sofia F. Umanskaya,
  • Maria V. Tareeva and ,
  • Anna D. Kudryavtseva and
  • Nikolay V. Tcherniega
  • + 1 author+ 0 author

28 September 2022

This paper demonstrates a significant increase in the efficiency of second-harmonic generation in a suspension of lithium niobate (LiNbO3) particles during freezing at nano and picosecond pum pulse durations. The amplification is caused by the format...

(This article belongs to the Section Lasers, Light Sources and Sensors)
  • Article
  • Open Access
9 Citations
2,779 Views
15 Pages

Research Progress of Corrosion Induced by Second-Phase Particles in Microalloyed High-Strength Rebars—Review

  • Shiwang Li,
  • Changrong Li,
  • Zeyun Zeng,
  • Changling Zhuang and ,
  • Sheng Huang and
  • Jingtian You
  • + 1 author+ 0 author

27 May 2022

The research progress surrounding second-phase particle-induced corrosion has been expounded through extensive work, including local corrosion (pitting corrosion, crevice corrosion, stress corrosion) of Al2O3, (RE)-AlO3, CaS, MnS, NbC, and other part...

  • Article
  • Open Access
13 Citations
7,693 Views
12 Pages

17 March 2004

The nature of the thermodynamic behavior of Type I superconductor particles, having a cross section less than the Ginzburg-Landau temperature dependent coherence length is discussed for magnetic field induced adiabatic phase transitions from the supe...

(This article belongs to the Special Issue Quantum Limits to the Second Law of Thermodynamics)
  • Article
  • Open Access
51 Citations
6,664 Views
10 Pages

12 December 2019

Aluminum alloys such as AA2024 are popular in the automotive and aircraft industries. The application of artificial aging significantly improves their mechanical properties by precipitation hardening. However, commercial alloys very often contain dif...

  • Article
  • Open Access
44 Citations
7,933 Views
16 Pages

29 January 2020

In this study, the continuous evolution of the second-phase particles across as-cast, homogenization, multi-directional forging (MDF), and solution-aging treatment and their effect on tensile fracture behavior of 2219 aluminum alloys with different C...

  • Review
  • Open Access
31 Citations
4,120 Views
16 Pages

19 October 2024

The friction stir welding (FSW) process is a unique combination of deformation and high temperature, which provides opportunities to modify microstructures through the adjustment of the processing parameters and is an ideal way to join non-weldable a...

  • Article
  • Open Access
3 Citations
3,002 Views
21 Pages

Numerical Investigation on Precipitation Hardening of Mg-Gd Alloys

  • Yulong Ge,
  • Chunyan Yang,
  • Yuwei Ma,
  • Yang Chen and
  • Manoj Gupta

19 March 2024

The second-phase particles in magnesium alloys could affect the mechanical properties of the material significantly. In this work, 3D finite element models with explicit incorporation of second-phase particles are established. The simulations are cal...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
6 Citations
4,403 Views
12 Pages

3 April 2024

In the present work, the goal is to use two-scale simulations to be incorporated into the full-field open software DAMASK version 2.0.3 crystal plasticity framework, in relation to the Bauschinger effect caused by the composite effect of the presence...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
9 Citations
3,198 Views
29 Pages

Effect of Particle Size Distributions and Shapes on the Failure Behavior of Dry Coke Aggregates

  • Alireza Sadeghi-Chahardeh,
  • Roozbeh Mollaabbasi,
  • Donald Picard,
  • Seyed Mohammad Taghavi and
  • Houshang Alamdari

24 September 2021

Carbon anodes participate in chemical reactions to reduce alumina in the Hall–Héroult process, of which coke aggregates make up a major part. The failure analysis of coke aggregates not only leads to a better understanding of the deformation mechanis...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
406 Views
27 Pages

21 August 2026

Quantum tunneling is conventionally described by the Schrödinger wave equation with a prescribed static potential barrier, providing accurate transmission probabilities but offering limited insight into the microscopic dynamics of particle&ndash...

  • Article
  • Open Access
440 Views
11 Pages

Numerical Simulation of the Impact of Turbulent Bursting on the Entrainment of Sand and Dust Particles

  • Zewen Ju,
  • Zhiyuan Wang,
  • Wei Wang,
  • Dan Wang and ,
  • Ding Tong and
  • Jie Zhang
  • + 1 author+ 0 author

Understanding the mechanisms by which sand and dust particles detach from the land surface has always been one of the most fundamental and critical issues in aeolian physics and dust-storm forecasting. In this study, large-eddy simulation (LES) was e...

(This article belongs to the Special Issue Land Surface Dynamic Mechanisms and Anthropogenic Facility Disasters Caused by Sand/Dust Processes)
  • Article
  • Open Access
23 Citations
3,029 Views
19 Pages

Investigation on the Strengthening Mechanisms of Nickel Matrix Nanocomposites

  • Íris Carneiro,
  • José Valdemar Fernandes and
  • Sónia Simões

The strengthening effect of carbon nanotubes (CNTs) in metal matrix nanocomposites occurs due to several mechanisms that act simultaneously. The possible strengthening mechanisms for metal matrix nanocomposites reinforced with CNTs consist of: (1) lo...

  • Review
  • Open Access
15 Citations
3,619 Views
30 Pages

Voids Development in Metals: Numerical Modelling

  • Wiktor Wciślik and
  • Sebastian Lipiec

14 July 2023

The article is a continuation of two previous review papers on the fracture mechanism of structural metals through the nucleation, growth and coalescence of voids. In the present paper, the literature on the numerical modelling of void nucleation and...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
31 Citations
2,717 Views
21 Pages

27 February 2023

The intensive of this study is to examine the melting heat and second-order slip (SoS) effect at the boundary in nanofluid and hybrid nanofluid (HN) ethylene–glycol (EG) based fluid through a curved surface using the Modified Fourier Law (MFL)...

(This article belongs to the Special Issue Advances in Computational Fluid Dynamics with Applications)
  • Article
  • Open Access
1 Citations
6,989 Views
20 Pages

Tadalafil (TD) has poor water solubility but is well absorbed without affecting food intake when administered orally. Owing to patient adherence and therapeutic characteristics, a TD-loaded orodispersible film (TDF) is preferable. However, the mechan...

(This article belongs to the Special Issue Drug Product Performance: Bioavailability, Relative Bioavailability and Bioequivalence, 2nd Edition)
  • Article
  • Open Access
18 Citations
3,947 Views
15 Pages

A State of Charge Estimation Method Based on Adaptive Extended Kalman-Particle Filtering for Lithium-ion Batteries

  • Bizhong Xia,
  • Shengkun Guo,
  • Wei Wang,
  • Yongzhi Lai and ,
  • Huawen Wang,
  • Mingwang Wang and
  • Weiwei Zheng
  • + 2 authors+ 0 author

15 October 2018

A state of charge (SOC) estimation method is proposed. An Adaptive Extended Kalman Particle filter (AEKPF) based on Particle Filter (PF) and Adaptive Kalman Filter (AKF) is used in order to decrease the error and reduce calculations. The second-order...

  • Article
  • Open Access
4 Citations
4,294 Views
15 Pages

Measurements of Particulate Matter from Electronic and Conventional Cigarettes: A Comparative Analysis of Methods

  • Ario Ruprecht,
  • Alessandro Borgini,
  • Chiara Veronese,
  • Andrea Tittarelli and ,
  • Roberto Boffi,
  • Martina Bertoldi,
  • Esteve Fernández,
  • Cinzia De Marco and
  • TackSHS Project Investigators
  • + 4 authors+ 0 author

30 August 2022

Due to the growing popularity of electronic cigarettes (ECs) and heated tobacco products (HTPs) as alternatives to conventional cigarettes (CCs), there is an increasing need to monitor the emissions of these new devices. ECs generate significant conc...

(This article belongs to the Section Atmospheric Techniques, Instruments, and Modeling)
  • Article
  • Open Access
4 Citations
7,724 Views
14 Pages

7 April 2015

The literature reports the proofs that entropy is an inherent property of any system in any state and governs thermal energy, which depends on temperature and is transferred by heat interactions. A first novelty proposed in the present study is that...

(This article belongs to the Special Issue Exergy: Analysis and Applications)
  • Article
  • Open Access
1 Citations
663 Views
15 Pages

Effects of Hot Compression Parameters on Flow Behavior and Microstructural Evolution of 7050 Aluminum Alloy

  • Liang Xu,
  • Youping Yi,
  • Shiquan Huang,
  • Hailin He and ,
  • Wenke Wang and
  • Fei Dong
  • + 1 author+ 0 author

3 July 2026

The hot deformation behavior of 7050 aluminum alloy was investigated by isothermal compression tests over a temperature range of 250 °C to 450 °C and a strain-rate range of 0.001 s−1 to 1 s−1. The flow stress was strongly dependen...

  • Article
  • Open Access
463 Views
17 Pages

27 July 2026

In this study, isothermal annealing of AA8014 aluminum alloy burst vents was performed at 250–500 °C for 10 s to 2 h, and Johnson–Mehl–Avrami–Kolmogorov (JMAK) kinetic analysis was employed to determine the recrystallizati...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
11 Citations
4,031 Views
9 Pages

24 October 2020

The effect of austenitizing temperature and aging treatment on the microstructure and mechanical properties of two new cold-rolled automotive steel plates (20Mn2Cr and 20Mn2CrNb) was investigated by using isothermal heat treatment, optical microscope...

(This article belongs to the Special Issue Heat Treatment and Mechanical Properties of Metals and Alloys)
  • Article
  • Open Access
1 Citations
1,104 Views
19 Pages

12 September 2025

The hot deformation discipline of typical 45CrNi steel under a strain rate ranging from 0.01 s−1 to 1 s−1 and deformation temperature between 850 °C and 1200 °C was investigated through isothermal hot compression tests. The activa...

  • Article
  • Open Access
3 Citations
2,661 Views
18 Pages

Three-Dimensional Analytical Calculation and Optimization of Plate-Type Permanent Magnet Electrodynamic Suspension System

  • Mingxin Liu,
  • Yiqiu Tan,
  • Qing Yang,
  • Qiang Chen and ,
  • Danfeng Zhou and
  • Jie Li
  • + 1 author+ 0 author

2 October 2022

With the development of rare earth permanent magnet (PM) materials, more and more attention has been paid to the permanent magnet electrodynamic suspension (PM-EDS) structure. In this paper, the plate-type PM-EDS structure with an adjustable deflecti...

  • Article
  • Open Access
4 Citations
2,854 Views
16 Pages

Interface Microstructure and Properties of Vacuum-Hot-Rolled 55#/316L Clad Rebars

  • Zhen Li,
  • Zecheng Zhuang,
  • Xuehai Qian,
  • Yong Xiang and ,
  • Lei Zeng and
  • Jianping Tan
  • + 1 author+ 0 author

6 January 2023

The existing process for the preparation of cladded rebars is too complicated for large-scale industrial production. Therefore, this paper proposes a 55#/316L rebar preparation method based on vacuum hot rolling. The microstructure and mechanical pro...

  • Article
  • Open Access
5 Citations
1,755 Views
14 Pages

Thermal Stability of Residual Stress, Microstructure, and Mechanical Property in Shot-Peened CNT/Al-Cu-Mg Composites

  • Wenlong Zhu,
  • Shilong Xing,
  • Lianbo Wang,
  • Zhaoyang Yang and ,
  • Wenliang Yu,
  • Ang Yin,
  • Wenbo Li,
  • Chuanhai Jiang and
  • Vincent Ji
  • + 4 authors+ 0 author

16 December 2024

To investigate the thermal stability of a shot-peened specimen and ensure the reliability operation under high temperatures, CNT/Al-Cu-Mg composites were treated by shot peening (SP) and the isothermal aging treatment. The heating temperatures were 1...

(This article belongs to the Special Issue Latest Insights in Metal Fatigue, Failure, and Fracture)
  • Article
  • Open Access
381 Views
28 Pages

High-Order Reliability Analysis of Nonlinear Steel Frames Using SVM-Reconstructed Limit State Function

  • Chengshu Yang,
  • Jialiang Wang,
  • Dalian Bai,
  • Bangzhi Zhang and
  • Yingshun Fang

3 August 2026

In complex nonlinear steel frames, the limit-state function is typically nonlinear and implicit, which hinders the direct application of traditional first- and second-order reliability methods (FORM/SORM). A reliability analysis approach for steel fr...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
7 Citations
1,531 Views
18 Pages

A Rotating Tidal Current Controller and Energy Router Siting and Capacitation Method Considering Spatio-Temporal Distribution

  • Junqing Jia,
  • Jia Zhou,
  • Yuan Gao,
  • Chen Shao and ,
  • Junda Lu and
  • Jiaoxin Jia
  • + 1 author+ 0 author

26 November 2024

As the proportion of new energy access increases year by year, the resulting energy imbalance and voltage/trend distribution complexity of the distribution network system in the spatio-temporal dimension become more and more prominent. The joint intr...

(This article belongs to the Special Issue Advanced Control, Optimization, Stability and Reliability of Microgrids and Power Systems)
  • Article
  • Open Access
320 Views
41 Pages

Life-Cycle Powertrain Sizing of Diesel–Battery Hybrid Trains via Configuration-Specific Joint Optimization of Driving Strategy and Energy Management

  • Chi Zhang,
  • Xiaoyu Xian,
  • Jian Wu,
  • Xinjie Zheng and ,
  • Zhidong Jia,
  • Lei Wu,
  • Mingjun Leng,
  • Xingzhen Zhou,
  • Chenguang Fan and
  • Jiancheng Chen
  • + 5 authors+ 0 author

2 November 2026

Conventional powertrain sizing of diesel–battery hybrid trains evaluates candidate component sizes on a common prescribed driving cycle, although each design changes the fuel-efficient speed trajectory and power split. This study develops a con...

(This article belongs to the Special Issue Advances in Lithium-Ion Battery Safety and Fire: 2nd Edition)
  • Article
  • Open Access
10 Citations
3,353 Views
31 Pages

10 August 2021

The improvement in the quantitative and qualitative heat transfer performances of working fluids is trending research in the present time for heat transfer applications. In the present work, the first and second law analyses of a microplate heat exch...

(This article belongs to the Special Issue Heat Transfer in Engineering)
  • Article
  • Open Access
3 Citations
4,280 Views
18 Pages

2 November 2018

To eliminate the numerical oscillations appearing in the first-order symmetric smoothed particle hydrodynamics (FO-SSPH) method for simulating transient heat conduction problems with discontinuous initial distribution, this paper presents a second-or...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
107 Citations
6,978 Views
15 Pages

1 April 2017

The state of charge (SOC) is the residual capacity of a battery. The SOC value indicates the mileage endurance, and an accurate SOC value is required to ensure the safe use of the battery to prevent over- and over-discharging. However, unlike size an...

  • Article
  • Open Access
6 Citations
3,485 Views
15 Pages

Effect of Annealing Temperature on Microstructure and Mechanical Properties of 00Cr21CuTi Stainless Steel Cold-Rolled Sheets

  • Guocai Ma,
  • Jie Sheng,
  • Yang Gao,
  • Lixu Tuo and ,
  • Yufeng Li and
  • Peiqing La
  • + 1 author+ 0 author

29 November 2024

To investigate the evolution of microstructure and mechanical properties in cold-rolled sheets of Ferritic Stainless Steel (FSS) during annealing, a series of annealing tests were performed on 00Cr21CuTi at different temperatures of 930, 990, and 105...

  • Article
  • Open Access
2,972 Views
18 Pages

Mass Generation via the Phase Transition of the Higgs Field

  • Dimitris M. Christodoulou and
  • Demosthenes Kazanas

29 November 2023

The commonly quoted bistable Higgs potential is not a proper description of the Higgs field because, among other technical reasons, one of its stable states acquires a negative expectation value in vacuum. We rely on formal catastrophe theory to deri...

(This article belongs to the Special Issue Mathematical Cosmology)
  • Article
  • Open Access
4 Citations
5,671 Views
27 Pages

21 October 2016

In the current research, entropy generation for the water–alumina nanofluid flow is studied in a circular minichannel for the laminar regime under constant wall heat flux in order to evaluate irreversibilities arising from friction and heat transfer....

(This article belongs to the Special Issue Limits to the Second Law of Thermodynamics: Experiment and Theory)
  • Review
  • Open Access
54 Citations
15,335 Views
32 Pages

Inhaled toxic aerosols of conventional cigarette smoke may impact not only the health of smokers, but also those exposed to second-stream smoke, especially children. Thus, less harmful cigarettes (LHCs), also called potential reduced exposure product...

  • Article
  • Open Access
24 Citations
4,808 Views
10 Pages

The Particle Shape of WC Governing the Fracture Mechanism of Particle Reinforced Iron Matrix Composites

  • Zulai Li,
  • Pengfei Wang,
  • Quan Shan,
  • Yehua Jiang and ,
  • He Wei and
  • Jun Tan
  • + 1 author+ 0 author

11 June 2018

In this work, tungsten carbide particles (WCp, spherical and irregular particles)-reinforced iron matrix composites were manufactured utilizing a liquid sintering technique. The mechanical properties and the fracture mechanism of WCp/iron matrix comp...

(This article belongs to the Special Issue Damage Detection and Characterization of High Performance Composites)
  • Article
  • Open Access
14 Citations
3,459 Views
10 Pages

Effects of C Addition on the Microstructures of As-Cast Cu–Fe–P Alloys

  • Wei Chen,
  • Xiaona Hu,
  • Wei Guo,
  • Jin Zou and ,
  • Keming Liu,
  • Deping Lu and
  • Dunqiang Tan
  • + 2 authors+ 0 author

28 August 2019

Effects of C addition on the microstructures of as-cast Cu–Fe–P (mass fraction) alloys were systematically investigated. The results show that C addition can refine the matrix microstructure and make Fe particles finer. The Fe particles o...

of 65