Performances of two common types of red mud, Bayer red mud and Sintering red mud, were investigated in this research. Their compositions, mechanical properties and microstructure characterization were measured through XRD, TG and SEM analysis. Their...
In this paper, Bayer red mud and ground granulated blast furnace slag were formed into three different ratios (7:3, 5:5 and 3:7) of alkali-activated cementitious materials (AASR) using a water glass solution as the alkali activator. By studying the c...
In order to reuse red mud and bauxite tailings mud (two typical aluminum industrial wastes) to reduce the occupation of land resources and environmental damage, these two wastes were combined to develop subgrade materials for the first time. With dif...
In order to effectively utilize aluminum industrial waste—red mud and bauxite tailings mud—and reduce the adverse impact of waste on the environment and occupation of land resources, a red mud–bauxite tailings mud foam lightweight s...
Red mud is a highly alkaline waste by-product of the aluminum industry. Although recycling of red mud is being actively researched, a feasible technological solution has not been found yet. In this study, we propose that neutralization of red mud alk...
With increasing production of red mud, the environmental problems caused by it are increasingly serious, and thus the integrated treatment of red mud is imminent. This article provides an overview of the composition and the basic characteristics of r...
Utilization of red mud in road projects is an effective way to consume large amounts of red mud on a large scale. In order to meet the requirements for road performance, a modified material, Heinchem, has been developed on the basis of extensive expe...
Red mud is a by-product of alumina production containing lanthanides. Growth of green microalgae on red mud and the intracellular accumulation of lanthanides was tested. The best growing species was Desmodesmus quadricauda (2.71 cell number doublings...
An overview is presented on the prospective use of red mud as a resource in this review. Various scopes are suggested for the utilization of red mud to maintain a sustainable environment. The potential use of red mud covers the valuable metal recover...
Red mud is a highly alkaline residue generated during the alumina extraction process, and its strong alkalinity significantly hinders its extensive and comprehensive utilization. The alkali in red mud mainly exists in two forms, namely, soluble alkal...
This study treated the NaOH component in red mud sludge, an industrial by-product generated at 300,000 tons annually in Korea, with sulfuric and nitric acids to produce NaSO4 and NaNO3, respectively. The effects of acid-treated liquid red mud (LRM) o...
The application of large amounts of red mud in the field of building materials is one of the main ways to reuse this material, but the high alkali content of red mud limits its application. In this paper, the washable alkali, removable alkali, and la...
The primary objective of this study is to investigate the effect and mechanism of replacing limestone powder with red mud as a filler on asphalt aging resistance. The microstructure and porosity characteristics of limestone powder, Bayer process red...
The purpose of this study was to recycle red mud, an industrial byproduct that generates 300,000 tons per year, into the construction industry. Red mud was prepared as a liquid, neutralized with sulfuric acid, and replaced with cement mortar. The pro...
Aluminum is produced from its primary bauxite ore through the Bayer process. Although Al is important nowadays in the development of humanity, its production leads to the generation of a huge amount of waste, called red mud. Globally, the estimation...
Red mud is an industrial solid waste rarely utilized and often disposed of in landfills, resulting in resource waste and environmental pollution. However, due to its high pH and abundance of iron and aluminum oxides and hydroxides, red mud has excell...
Red mud desulfurization is an environmentally friendly desulfurization technology. After desulfurization, the acidity of red mud slurry continues to be neutralized for processing new red mud, and no waste acid is generated. At present, there is a lac...
This paper shows the preliminary results of an investigation into the possibility of using red mud slag (RMS) for phosphate sorption from aqueous solutions. The red mud slag was obtained from red mud treatment, specifically from carbothermal reductio...
Red mud is a highly alkaline solid waste discharged in the alumina production process. Because of its large amount of discharge and high alkalinity, it is mostly stored in dams, occupying a large number of land resources and posing a great safety haz...
In 2023, the global production of new red mud is expected to reach nearly 200 million tons, but less than 10% of it is currently being utilized in an environmentally friendly manner. To reduce the sintering temperature of alumina ceramics, a sinterin...
Red mud from bauxite processing is among the large-tonnage technogenic waste that poses a significant ecological threat. At the same time, red mud serves as a raw material source for expanding the resource base for obtaining iron, rare metals, and ra...
The preparation of high-quality inorganic fibers by centrifugation from modified melting-separated red mud, which is the product of the efficient recovery of pig iron from red mud, is a new approach to achieve large-scale production of high value-add...
A red mud suspension of ~700,000 m3 was accidentally released from the alumina plant in Ajka, Hungary, on the 4th of October 2010, flooding several buildings in the nearby towns. As there is no information in the literature on the effects of red mud...
A batch experiment was conducted to compare the Cu scavenging capacity between two different red mud types: the first one was a highly basic red mud derived from a combined sintering and Bayer process, and the second one was a seawater-neutralized re...
Red mud is a highly alkaline solid waste with an annual emission of over 200 million tons, which requires large-scale utilization methods. Soil Cd remediation is a global concern, due to its high toxicity and strong mobility. Given red mud’s po...
21 September 2022
Red mud is a by-product of alumina production, and its disposal can have severe environmental consequences. This study experimentally investigates the feasibility of using red mud from the Bayer process for cemented paste backfill (CPB). Different bi...
The effects of red mud on the microstructures and high-temperature tensile properties of the ZL109 aluminum alloy have been investigated. Red mud/ZL109-based composite materials with added red mud (a major byproduct of the aluminum industry), which h...
The utilization of red mud by blending it into cement paste is still facing poor workability issues due to the finer particle size and higher water absorption of red mud, which can be solved by the addition of polycarboxylate superplasticizer (PCE) t...
To maximize the utilization of red mud in geopolymers, a red mud–metakaolin (RM-MK) geopolymer and red mud–fly ash (RM-FA) geopolymer were prepared, respectively. The effects of red mud content on the compressive strength and microstructure of the ge...
The catalytic effect of red mud on Vietnam anthracite’s combustion characteristics was investigated. The mineralogical composition of the red mud includes CaCO3, Fe2O3, FeO(OH), FeTiO3, and Al(OH)3. This red mud is rich in Na, Ca, Al, Fe, and T...
Red mud is a byproduct of the aluminum oxide refining process that is an industrial waste residue. The storage of red mud can seriously contaminate the soil, water system, and atmosphere while also taking up a lot of valuable land resources. However,...
Background: Phosphorous (P) is an essential nutrient with finite and non-renewable resources; however, it can cause eutrophication in freshwater. The use or storage of red mud (RM), a by-product of alumina production with high iron and aluminium cont...
The strong alkalinity of red mud and the heavy metals it contains pose a serious threat to the environment. This study investigated the possibility of applying red mud as a solid waste material in road construction to mitigate the problem of red mud...
Because of the strong alkalinity of red mud, it is difficult to recycle, and the long-term accumulation of red mud causes environmental pollution. The study shows that the solidification characteristics of bayer red mud (RM) under the action of Ca(OH...
Untreated and pH-reduced red mud is used as a potential raw material in ceramic technology. During the alkalinity reduction process, CO2 is bubbled through the untreated red mud, which is particularly important as it can reduce the CO2 content of the...
In this paper, the characteristics and current problems associated with red mud and the progress of research on iron extraction from high-iron red mud are briefly described. By adding conditioning materials to red mud and quenching and tempering, the...
As a solid waste generated in the alumina industry, red mud poses a significant environmental hazard and a storage problem. In this study, red mud was added to road cement clinker in order to utilize it. The sintering red mud was first de-alkalized,...
The utilization of red mud in the production of ceramic products represents an efficient approach for harnessing red mud resources. Composite ceramics were prepared from Al2O3, red mud, and Cr2O3 by atmospheric pressure sintering, and the phase compo...
The aluminum Bayer production process is widespread all over the world. One of the waste products of the Bayer process is a basic aluminosilicate bauxite residue called red mud. The aluminosilicate nature of red mud makes it suitable as a precursor f...
High-iron and low-silicon red mud is not only an alkaline solid waste from Bayer process alumina production, but it is also a very important secondary iron resource. Magnetization roasting is considered as an effective and typical method for the iron...
10 June 2019
This study analyzes the leaching behavior of elements from red mud (bauxite residue) at pH values ranging from 2 to 13. The leaching characteristics of metals and contaminated anions in five red mud samples produced by Bayer and combined processes we...
The basic oxygen steelmaking process is based on the CaO-FeO-SiO2 ternary slag system, characterized by a high melting point and low lime dissolution rate, often becoming one of the key factors limiting the efficiency of the converter. The bulk solid...
Flexibility, stretchability, and flame retardancy are of ever increasing importance in constructing grouting materials. Herein, a simple and effective strategy to make organic-inorganic composite grouting material in a “flexible, stretchable, a...
Recently, there has been a great effort to incorporate industrial waste into cement-based materials to reach a more sustainable cement industry. In this regard, the Bayer process of obtaining alumina from bauxite generates huge amounts of waste calle...
The problem of large stockpiles of red mud needs to be solved, and the use of red mud to prepare inorganic fibers is a new way of applying red mud on a large scale. The role of CaO/Al2O3 in the melting point and melt structure of red mud was investig...
Bauxite residue, known as red mud, is a by-product of alumina production using the Bayer process. Currently, its total global storage amounts to over 4.6 billion tons, including about 600 million tons in Russia. The total global storage of red mud oc...
This study investigates the use of red muds as adsorbents for As (V) removal. Red mud is a waste that contains a large amount of iron oxides and hydroxides, which are excellent adsorbents of arsenic, especially those possessing magnetic properties an...
Red mud, a Fe-rich waste generated from the aluminum industry, was recovered as an adsorbent for wastewater treatment. The separation process of red mud from water after adsorption, including centrifugation and filtration, was complicated. This study...
This study investigated the properties of hardened pastes made with calcium sulfoaluminate expansive agent (CSA), red mud, and silica fume. Five different ratios of 10:90, 20:80, 30:70, 40:60, and 50:50 were applied as the weight ratios of CSA and re...
This study provides a comprehensive evaluation of red mud as a sustainable material for road base construction, particularly in combination with bottom ash. Red mud, a by-product of the Bayer process used in alumina extraction, is known for its high...
of 9