Skip to Content

144 Results Found

  • Article
  • Open Access
12 Citations
6,976 Views
16 Pages

25 April 2018

Bubbly flows are commonly used in various applications and their measurement is an important research topic. The ultrasound pulse-echo technique allows for the detection of each bubble and the measurement of the position of its surface. However, so f...

(This article belongs to the Special Issue Ultrasonic Sensors 2018)
  • Article
  • Open Access
32 Citations
10,129 Views
18 Pages

Air-Coupled and Resonant Pulse-Echo Ultrasonic Technique

  • Tomás Gómez Álvarez-Arenas and
  • Jorge Camacho

14 May 2019

An ultrasonic, resonant, pulse-echo, and air-coupled nondestructive testing (NDT) technique is presented. It is intended for components, with regular geometries where it is possible to excite resonant modes, made of materials that have a high acousti...

(This article belongs to the Special Issue New Methods and Applications of Nondestructive Testing in Close Ranging)
  • Article
  • Open Access
18 Citations
4,685 Views
13 Pages

8 October 2021

This research proposes a 3D internal visualization using ultrasonic pulse-echo tomography technique to evaluate accurately the state of concrete structures for their efficient maintenance within a limited budget. Synthetic aperture focusing technique...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
11 Citations
4,409 Views
15 Pages

4 June 2024

This paper presents a study to accurately evaluate defects in concrete decks using ultrasonic pulse-echo signals. A reinforced concrete deck with void defects was designed and evaluated for validation, and a commercial ultrasonic pulse-echo (UPE) dev...

(This article belongs to the Section Civil Engineering)
  • Feature Paper
  • Article
  • Open Access
39 Citations
5,592 Views
26 Pages

Measurement of the Anisotropic Dynamic Elastic Constants of Additive Manufactured and Wrought Ti6Al4V Alloys

  • Ofer Tevet,
  • David Svetlizky,
  • David Harel,
  • Zahava Barkay and ,
  • Dolev Geva and
  • Noam Eliaz
  • + 1 author+ 0 author

15 January 2022

Additively manufactured (AM) materials and hot rolled materials are typically orthotropic, and exhibit anisotropic elastic properties. This paper elucidates the anisotropic elastic properties (Young’s modulus, shear modulus, and Poisson’s...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access

Ultrasonic Pulse-Echo Evaluation of Resistance Spot-Welded Joints in Thin Car-Body Steel Sheets

  • Dariusz Ulbrich,
  • Piotr Banas,
  • Wiktor Cisek,
  • Łukasz Warguła and ,
  • Bartosz Wieczorek,
  • Aigerim Keshubayeva and
  • Zhanar Zhunusbekova
  • + 2 authors+ 0 author
Appl. Sci.2026, 16(22), 11503;https://doi.org/10.3390/app162211503 
(registering DOI)

20 November 2026

Resistance spot welding is the principal joining process for car bodies, and the condition of several thousand welds per vehicle has to be confirmed without destroying the product. This study examined to what extent the ultrasonic pulse-echo techniqu...

(This article belongs to the Special Issue Applications of Ultrasonic Waves for Non-Destructive Testing)
  • Letter
  • Open Access
17 Citations
4,162 Views
13 Pages

A Recursive Algorithm for Indoor Positioning Using Pulse-Echo Ultrasonic Signals

  • Salvatore A. Pullano,
  • Maria Giovanna Bianco,
  • Davide C. Critello,
  • Michele Menniti and ,
  • Antonio La Gatta and
  • Antonino S. Fiorillo
  • + 1 author+ 0 author

4 September 2020

Low frequency ultrasounds in air are widely used for real-time applications in short-range communication systems and environmental monitoring, in both structured and unstructured environments. One of the parameters widely evaluated in pulse-echo ultr...

(This article belongs to the Special Issue Sensors and Systems for Indoor Positioning)
  • Article
  • Open Access
8 Citations
6,243 Views
13 Pages

Ultrasonic Pulse-Echo Signal Analysis for Damage Evaluation of Metallic Slit-Plate Hysteretic Dampers

  • Chihab Abarkane,
  • David Galé-Lamuela,
  • Amadeo Benavent-Climent,
  • Elisabet Suárez and
  • Antolino Gallego

26 November 2017

This paper proposes a pulse-echo Ultrasonic Testing (UT) methodology to quantify the damage of hysteretic dampers subjected to cyclic loadings. Energy dissipation is known as an innovative strategy for the protection of buildings against earthquakes....

  • Article
  • Open Access
3 Citations
3,256 Views
11 Pages

9 October 2021

Pulse-echo laser ultrasonic propagation imaging is a nondestructive testing technique developed for composite materials and aluminum alloys used in aerospace. Although this method has been in usage for a considerable time, information of the detectab...

  • Article
  • Open Access
12 Citations
9,135 Views
10 Pages

Fabrication of a PMN-PT Single Crystal-Based Transcranial Doppler Transducer and the Power Regulation of Its Detection System

  • Qingwen Yue,
  • Dongxu Liu,
  • Wei Wang,
  • Wenning Di and ,
  • Di Lin,
  • Xi'an Wang and
  • Haosu Luo
  • + 2 authors+ 0 author

19 December 2014

Doppler sonographic measurement of flow velocity in the basal cerebral arteries through the intact skull was developed using a pulsed Doppler technique and 2 MHz emitting frequency. Relaxor-based ferroelectric single crystals Pb(Mg1/3Nb2/3)O3-PbTiO3...

(This article belongs to the Special Issue Ultrasonic Sensors and Transducers for Applications in Biology, Medicine and NDT)
  • Article
  • Open Access
12 Citations
3,784 Views
16 Pages

26 August 2021

Ultrasonic is one of the well-known methods for surface roughness measurement, but small roughness will only lead to a subtle variation of transmission or reflection. To explore sensitive techniques for surfaces with small roughness, nonlinear ultras...

(This article belongs to the Special Issue Novel Acoustic Methods for the Characterization, Modeling and Nondestructive Testing of Materials: From Infrasonic to Ultrasonic)
  • Article
  • Open Access
10 Citations
3,994 Views
12 Pages

10 December 2020

Glass with strong durability and transparency has been in the spotlight in various fields, including displays. Elastic and shear moduli and Poisson’s ratio are important properties of glasses. The purpose of this study is to evaluate the change...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
4 Citations
1,999 Views
26 Pages

Coating Thickness Estimation Using a CNN-Enhanced Ultrasound Echo-Based Deconvolution

  • Marina Perez-Diego,
  • Upeksha Chathurani Thibbotuwa,
  • Ainhoa Cortés and
  • Andoni Irizar

8 October 2025

Coating degradation monitoring is increasingly important in offshore industries, where protective layers ensure corrosion prevention and structural integrity. In this context, coating thickness estimation provides critical information. The ultrasound...

(This article belongs to the Special Issue Nondestructive Sensing and Imaging in Ultrasound—Second Edition)
  • Article
  • Open Access
14 Citations
3,992 Views
15 Pages

Relationship between Young’s Modulus and Planar Density of Unit Cell, Super Cells (2 × 2 × 2), Symmetry Cells of Perovskite (CaTiO3) Lattice

  • Marzieh Rabiei,
  • Arvydas Palevicius,
  • Sohrab Nasiri,
  • Amir Dashti and ,
  • Andrius Vilkauskas and
  • Giedrius Janusas
  • + 1 author+ 0 author

6 March 2021

Calcium titanate-CaTiO3 (perovskite) has been used in various industrial applications due to its dopant/doping mechanisms. Manipulation of defective grain boundaries in the structure of perovskite is essential to maximize mechanical properties and st...

(This article belongs to the Special Issue X-ray Diffraction of Functional Materials)
  • Article
  • Open Access
21 Citations
9,074 Views
24 Pages

Accurate Estimation of Airborne Ultrasonic Time-of-Flight for Overlapping Echoes

  • Esther G. Sarabia,
  • Jose R. Llata,
  • Sandra Robla,
  • Carlos Torre-Ferrero and
  • Juan P. Oria

12 November 2013

In this work, an analysis of the transmission of ultrasonic signals generated by piezoelectric sensors for air applications is presented. Based on this analysis, an ultrasonic response model is obtained for its application to the recognition of objec...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
21 Citations
5,127 Views
15 Pages

Ultrasonic Imaging of Thick Carbon Fiber Reinforced Polymers through Pulse-Compression-Based Phased Array

  • Muhammad Khalid Rizwan,
  • Stefano Laureti,
  • Hubert Mooshofer,
  • Matthias Goldammer and
  • Marco Ricci

7 February 2021

The use of pulse-compression in ultrasonic non-destructive testing has assured, in various applications, a significant improvement in the signal-to-noise ratio. In this work, the technique is combined with linear phased array to improve the sensitivi...

(This article belongs to the Special Issue Advances in Nondestructive Testing and Structural Health Monitoring for Materials and Aerospace Industry Applications)
  • Article
  • Open Access
2 Citations
3,749 Views
27 Pages

An Open Multifunctional FPGA-Based Pulser/Receiver System for Intravascular Ultrasound (IVUS) Imaging and Therapy

  • Amauri A. Assef,
  • Paula L. S. de Moura,
  • Joaquim M. Maia,
  • Phuong Vu and ,
  • Adeoye O. Olomodosi,
  • Stephan Strassle Rojas and
  • Brooks D. Lindsey
  • + 2 authors+ 0 author

25 July 2025

Coronary artery disease (CAD) is the third leading cause of disability and death globally. Intravascular ultrasound (IVUS) is the most commonly used imaging modality for the characterization of vulnerable plaques. The development of novel intravascul...

(This article belongs to the Special Issue Ultrasonic Imaging and Sensors II)
  • Article
  • Open Access
6 Citations
3,747 Views
17 Pages

16 July 2023

This paper presents the numerical simulation of the ultrasonic wave transmittance utilizing the elastodynamic finite integration technique (EFIT). With this methodology, it is possible to simulate the propagation of the ultrasound in a medium with a...

(This article belongs to the Special Issue Thermal and Mechanical Properties of Advanced Polymeric and Amorphous Materials)
  • Article
  • Open Access
43 Citations
10,137 Views
13 Pages

15 September 2014

Ultrasonic is one of the most common uses of a non-destructive evaluation method for crack detection and characterization. The effectiveness of the acoustic-ultrasound Structural Health Monitoring (SHM) technique for the determination of the depth of...

(This article belongs to the Special Issue Ultrasonic Sensors and Transducers for Applications in Biology, Medicine and NDT)
  • Article
  • Open Access
41 Citations
8,949 Views
17 Pages

Structural Health Monitoring Using Ultrasonic Guided-Waves and the Degree of Health Index

  • Sergio Cantero-Chinchilla,
  • Gerardo Aranguren,
  • José Manuel Royo,
  • Manuel Chiachío and ,
  • Josu Etxaniz and
  • Andrea Calvo-Echenique
  • + 1 author+ 0 author

2 February 2021

This paper proposes a new damage index named degree of health (DoH) to efficiently tackle structural damage monitoring in real-time. As a key contribution, the proposed index relies on a pattern matching methodology that measures the time-of-flight m...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
21 Citations
3,929 Views
20 Pages

Quantitative Measurement Method for Ice Roughness on an Aircraft Surface

  • Yuan Wang,
  • Yang Zhang,
  • Yan Wang,
  • Dongyu Zhu and ,
  • Ning Zhao and
  • Chunling Zhu
  • + 1 author+ 0 author

22 November 2022

When an aircraft passes through clouds containing supercooled water droplets, the leading edge’s surface will gradually accumulate ice. Ice surface roughness is an important parameter affecting the local convective heat transfer coefficient and...

(This article belongs to the Special Issue Latest Advancements in Aeronautics and Astronautics: Celebrating the 70th Anniversary of Nanjing University of Aeronautics and Astronautics)
  • Article
  • Open Access
28 Citations
7,483 Views
20 Pages

Ultrasound-Based Smart Corrosion Monitoring System for Offshore Wind Turbines

  • Upeksha Chathurani Thibbotuwa,
  • Ainhoa Cortés and
  • Andoni Irizar

13 January 2022

The ultrasound technique is a well-known non-destructive and efficient testing method for on-line corrosion monitoring. Wall thickness loss rate is the major parameter that defines the corrosion process in this approach. This paper presents a smart c...

(This article belongs to the Special Issue Advanced Operation and Maintenance in Solar Plants, Wind Farms and Microgrids)
  • Proceeding Paper
  • Open Access
558 Views
8 Pages

7 November 2025

There are various non-destructive techniques for determining the internal properties of materials in fluids, semi-solids, solids, and biological tissue. One of these techniques is low-intensity ultrasonic testing. In this proceeding paper, a study on...

(This article belongs to the Proceedings of The 12th International Electronic Conference on Sensors and Applications)
  • Article
  • Open Access
6 Citations
6,695 Views
18 Pages

Novel Real-Time Diagnosis of the Freezing Process Using an Ultrasonic Transducer

  • Yen-Hsiang Tseng,
  • Chin-Chi Cheng,
  • Hong-Ping Cheng and
  • Dasheng Lee

4 May 2015

The freezing stage governs several critical parameters of the freeze drying process and the quality of the resulting lyophilized products. This paper presents an integrated ultrasonic transducer (UT) in a stainless steel bottle and its application to...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
21 Citations
4,230 Views
14 Pages

13 January 2022

Ultrasonic guided wave testing is an essential technique in non-destructive testing for structural integrity of oil and gas pipelines. This technique, based on the pulse-echo method, is often used for the long-range detection of pipelines at any loca...

  • Article
  • Open Access
12 Citations
8,475 Views
21 Pages

Performance Evaluation of a Biometric System Based on Acoustic Images

  • Alberto Izquierdo-Fuente,
  • Lara Del Val,
  • María I. Jiménez and
  • Juan J. Villacorta

10 October 2011

An acoustic electronic scanning array for acquiring images from a person using a biometric application is developed. Based on pulse-echo techniques, multifrequency acoustic images are obtained for a set of positions of a person (front, front with arm...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
12 Citations
7,214 Views
14 Pages

17 October 2014

This paper presents an integrated high temperature ultrasonic transducer (HTUT) on a sensor insert and its application for real-time diagnostics of the conventional hot embossing process to fabricate V-cut patterns. The sensor was directly deposited...

(This article belongs to the Special Issue Novel Sensors for Non-Destructive Testing and Structural Health Monitoring)
  • Article
  • Open Access
11 Citations
2,723 Views
18 Pages

14 October 2021

The impact of weak particle-matrix interfaces in aluminum matrix composites (AMCs) on effective elastic properties was studied using micromechanical finite-element analysis. Both simplified unit cell representations (i.e., representative area or volu...

  • Article
  • Open Access
20 Citations
7,156 Views
10 Pages

Preparation and Elastic Moduli of Germanate Glass Containing Lead and Bismuth

  • Hj A. A. Sidek,
  • Hamid R. Bahari,
  • Mohamed K. Halimah and
  • Wan M. M. Yunus

11 April 2012

This paper reports the rapid melt quenching technique preparation for the new family of bismuth-lead germanate glass (BPG) systems in the form of (GeO2)60–(PbO)40−x–(½Bi2O3)x where x = 0 to 40 mol%. Their densities with respect of Bi2O3 concentration...

(This article belongs to the Section Materials Science)
  • Article
  • Open Access
330 Views
32 Pages

Ultrasonic pulse-echo imaging is one of the most widely used non-destructive evaluation (NDE) modalities for monitoring the structural integrity of reinforced-concrete civil infrastructure such as bridge decks, tunnel linings, and dam walls. In this...

(This article belongs to the Topic Intelligent Maintenance and Health Management in Smart Manufacturing)
  • Article
  • Open Access
4 Citations
3,221 Views
20 Pages

Comparison of Pulse-Echo Tomography and Through-Transmission Ultrasonic Test for UPV Characterization of Building Materials

  • Emilia Vasanelli,
  • Davide Di Gennaro,
  • Matteo Sticchi,
  • Gianni Blasi and
  • Luigi Capozzoli

Ultrasonic pulse velocity (UPV) is a widely used technique for diagnosis and structural safety assessment of existing buildings. The main difficulties in UPV tests on-site are due to one-sided accessibility of materials and degraded/irregular surface...

(This article belongs to the Section Infrastructures Materials and Constructions)
  • Article
  • Open Access
14 Citations
4,499 Views
20 Pages

14 March 2023

An ultrasonic sonar-based ranging technique is introduced for measuring full-field railroad crosstie (sleeper) deflections. Tie deflection measurements have numerous applications, such as detecting degrading ballast support conditions and evaluating...

(This article belongs to the Special Issue Sensors Applications in Structural Health Monitoring: Extended Papers from the 10th European Workshop on Structural Health Monitoring (EWSHM))
  • Article
  • Open Access
1 Citations
2,733 Views
14 Pages

Use of Non-Destructive Ultrasonic Techniques as Characterization Tools for Different Varieties of Wine

  • José Ángel Corbacho,
  • David Morcuende,
  • Montaña Rufo,
  • Jesús M. Paniagua and ,
  • María Ángeles Ontalba and
  • Antonio Jiménez
  • + 1 author+ 0 author

2 July 2024

In this work, we have verified how non-destructive ultrasonic evaluation allows for acoustically characterizing different varieties of wine. For this, a 3.5 MHz transducer has been used by means of an immersion technique in pulse-echo mode. The tests...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
29 Citations
7,078 Views
10 Pages

12 April 2019

Pipe wall thinning and leakage due to flow accelerated corrosion (FAC) are important safety concerns for nuclear power plants. A shear horizontal ultrasonic pitch/catch technique was developed for the accurate monitoring of the pipe wall-thickness. A...

(This article belongs to the Special Issue Advanced Sensors for Real-Time Monitoring Applications)
  • Communication
  • Open Access
4 Citations
1,830 Views
11 Pages

2 July 2023

In nonlinear ultrasonic testing, the quadratic and more recently cubic nonlinearity parameters are frequently measured as a quantitative indicator of damaged material state. Application of higher-order harmonics can improve the sensitivity of detecti...

(This article belongs to the Special Issue Ultrasound for Material Characterization and Processing II)
  • Article
  • Open Access
4 Citations
2,851 Views
15 Pages

8 May 2023

An ultrasonic wave mode-based method for density measurement in highly foamed batters was developed. Therefore, a non-contact ultrasonic sensor system was designed to generate signals for batch-wise processes. An ultrasonic sensor, containing a piezo...

(This article belongs to the Special Issue Recent Advances in the Food Safety and Quality Management Techniques)
  • Review
  • Open Access
14 Citations
6,828 Views
22 Pages

Loss Determination Techniques for Piezoelectrics: A Review

  • Yoonsang Park,
  • Minkyu Choi and
  • Kenji Uchino

21 May 2023

Nowadays, heat dissipation in electronic devices is one of the serious issues to be resolved in energy and environmental terms. Piezoelectric materials are being utilized in many electronic devices, yet the roadblock toward further miniaturization of...

(This article belongs to the Special Issue Piezoelectric Actuators—A Special Issue in Honor of Prof. Dr. Kenji Uchino)
  • Article
  • Open Access
9 Citations
4,005 Views
13 Pages

Scattering of Surface Waves by a Three-Dimensional Cavity of Arbitrary Shape: Analytical and Experimental Studies

  • Jaesun Lee,
  • VanTrung Ngo,
  • Haidang Phan,
  • TruongGiang Nguyen and ,
  • Duy Kien Dao and
  • Younho Cho
  • + 1 author+ 0 author

12 December 2019

The scattering of surface waves by a three-dimensional shallow cavity of arbitrary shape at the surface of a homogenous, isotropic, linearly elastic half-space is theoretically investigated. A novel analytical approach based on a reciprocity consider...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
19 Citations
3,655 Views
22 Pages

27 April 2021

Adhesively bonded dissimilar materials have attracted high interest in the aerospace and automotive industries due to their ability to provide superior structural characteristics and reduce the weight for energy savings. This work focuses on the impr...

(This article belongs to the Special Issue Structural Health Monitoring and Non-destructive Testing for Engineering Applications: Advances in Sensor and Technologies)
  • Article
  • Open Access
6 Citations
3,378 Views
12 Pages

6 March 2024

Aseptic loosening is the dominant failure mechanism in contemporary knee replacement surgery, but diagnostic techniques are poorly sensitive to the early stages of loosening and poorly specific in delineating aseptic cases from infections. Smart impl...

(This article belongs to the Special Issue Novel Implantable Sensors and Biomedical Applications)
  • Feature Paper
  • Article
  • Open Access
52 Citations
7,083 Views
14 Pages

28 November 2019

Ultrasonic nondestructive techniques can be used to characterize grain size and to evaluate mechanical properties of metals more practically than conventional destructive optical metallography and tensile tests. Typical ultrasonic parameters that can...

(This article belongs to the Special Issue Non-Destructive Evaluation (NDE) for Aging Industrial Plant and Infrastructure)
  • Article
  • Open Access
3 Citations
3,061 Views
12 Pages

NDE Characterization of Surface Defects on Piston Rods in Shock Absorbers Using Rayleigh Waves

  • Kwang-Hee Im,
  • Yun-Taek Yeom,
  • Hyung-Ho Lee,
  • Sun-Kyu Kim and ,
  • Young-Tae Cho,
  • Yong-Deuck Woo,
  • Peng Zhang,
  • Gui-Lin Zhang and
  • Sung-Duk Kwon
  • + 4 authors+ 0 author

12 June 2022

In general, shock absorbers are components that can absorb shock and vibration energy caused by wheel behavior, and they provide handling stability. As a piston rod is an important component in shock absorbers, multiple processes are performed in ord...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
8 Citations
3,565 Views
16 Pages

20 September 2023

Carbon fiber composites are a popular design material due to their high specific strength. The directional strength of woven composites can be customized by changing the orientation and sequencing of individual lamina within the ply stack. This allow...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
33 Citations
7,839 Views
15 Pages

Application of Ultrasonic Guided Waves for Inspection of High Density Polyethylene Pipe Systems

  • Premesh Shehan Lowe,
  • Habiba Lais,
  • Veena Paruchuri and
  • Tat-Hean Gan

3 June 2020

The structural integrity assessment of thermoplastic pipes has become an interesting area of research due to its elevated usage in the liquid/gas transportation industry. Ultrasonic guided wave testing has gained higher attention from industry for th...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
512 Views
28 Pages

Multi-Feature Characterization and Numerical Simulation of Interfacial Damage in Thermal Barrier Coatings Using Immersion Ultrasonics

  • Ziqiao Tang,
  • Xiaoheng Zhou,
  • Yu Hu,
  • Desong Jiang and ,
  • Yihang Tu,
  • Won-Ho Kim,
  • Sung-Jin Song,
  • Haiyin Qing and
  • Tao Liu
  • + 4 authors+ 0 author

3 September 2026

Owing to their exceptional thermal insulation and protective capabilities, thermal barrier coatings (TBCs) are widely applied to critical hot-section components of aero-engines. However, under increasingly harsh service environments, internal defects...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
7,101 Views
29 Pages

18 February 2022

Ultrasonic testing of polycrystalline media relies heavily on simulation of the expected signals in order to detect and correctly interpret deviations due to defects. Many effects disturb ultrasonic waves propagating in polycrystalline media. One of...

(This article belongs to the Special Issue Elastic Wave Scattering in Heterogeneous Media)
  • Article
  • Open Access
12 Citations
4,576 Views
15 Pages

Capability of Advanced Ultrasonic Inspection Technologies for Hydraulic Turbine Runners

  • Mohammad Ebrahim Bajgholi,
  • Gilles Rousseau,
  • Martin Viens and
  • Denis Thibault

20 May 2021

This paper presents the results of a project aimed at evaluating the performance of ultrasonic techniques for detecting flaws in Francis turbine runners. This work is the first phase of a more ambitious program aimed at improving the reliability of i...

(This article belongs to the Special Issue Structural Health Monitoring & Nondestructive Testing)
  • Article
  • Open Access
15 Citations
9,005 Views
15 Pages

Aluminum Nitride Piezoelectric Micromachined Ultrasound Transducer Arrays for Non-Invasive Monitoring of Radial Artery Stiffness

  • Sheng Wu,
  • Kangfu Liu,
  • Wenjing Wang,
  • Wei Li and ,
  • Tao Wu,
  • Heng Yang and
  • Xinxin Li
  • + 2 authors+ 0 author

25 February 2023

An aluminum nitride (AlN) piezoelectric micromachined ultrasound transducer (PMUT) array was proposed and fabricated for non-invasive radial artery stiffness monitoring, which could be employed in human vascular health monitoring applications. Using...

(This article belongs to the Special Issue Design, Fabrication and Testing of MEMS/NEMS, 2nd Edition)
  • Article
  • Open Access
1 Citations
4,511 Views
13 Pages

A Fluidics-Based Double Flexural Membrane Piezoelectric Micromachined Ultrasonic Transducer (PMUT) for Wide-Bandwidth Underwater Acoustic Applications

  • Khairul Azman Ahmad,
  • Mohamad Faizal Abd Rahman,
  • Khairu Anuar Mohamed Zain,
  • Muhammad Naim Haron and
  • Asrulnizam Abd Manaf

19 August 2021

In acoustic receiver design, the receiving sensitivity and bandwidth are two primary parameters that determine the performance of a device. The trade-off between sensitivity and bandwidth makes the design very challenging, meaning it needs to be fine...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
6 Citations
2,775 Views
15 Pages

20 June 2024

This study aimed to address the challenges encountered in traditional bulk wave delamination detection methods characterized by low detection efficiency. Additionally, the limitations of guided wave delamination detection methods were addressed, part...

(This article belongs to the Topic Advances in Non-Destructive Testing Methods, 2nd Edition)

of 3