Pulse pile-up presents a significant challenge in nuclear radiation measurements, particularly in neutron-gamma pulse shape discrimination, as it causes pulse distortion and diminishes identification accuracy. To address this, we propose an optimized...
This paper presents pulse multiplication technology based on an optimal Pulse Doubling Technique (PDT) to upgrade a 28-Pulse Rectifier (28-PR) to a 56-PR. The optimal PDT comprises a Tapped Interphase Reactor (TIPR) with a low kVA-rating and two diod...
The effects of electrical pulse width and output irradiance on the inactivation effect of intense pulse light (IPL) are studied in this paper. The measured radiant efficiency of pulsed xenon lamp can be more than 50%, and its irradiance can reach lev...
Wearable pulse detection devices can be used for daily human healthcare monitoring; however, the relatively poor flexibility and low sensitivity of the pulse detection devices are hindering the scrutiny of pulse information during pulse diagnosis of...
This study presents a digitally controlled, combined pulse-width and pulse-density modulator (PWDM) that leverages the inherent pulse-width modulation associated with natural binary counting. The proposed approach involves combining the individual bi...
In this paper, the output electrical pulse width of semi-insulating gallium arsenide photoconductive semiconductor switch (SI-GaAs PCSS) is controlled by means of Blumlein pulse formation line. Under the condition that the bias voltage is 28 kV and t...
The Split Hopkinson pressure bar (SHPB) is widely used for characterizing the mechanical behavior of materials at high strain rates. One of the most challenging factors is achieving constant strain rate (CSR) loading of the specimen at a certain stra...
Radial pulse diagnosis is the most common method to examine the human health state in Traditional East Asian Medicine (TEAM). A cold stress-related suboptimal health state (subhealth) is often undetectable during routine medical examinations, however...
In this work, numerical simulation and experimental research were carried out on ablation mechanism of the first pulse (I pulse) insulation layer in a double-pulse solid rocket motor (SRM). Firstly, based on the internal thermal environment of the ty...
The stiffness index (SI) is used to estimate cardiovascular risk in humans. In this study, we developed a refined SI for determining arterial stiffness based on the decomposed radial pulse and digital volume pulse (DVP) waveforms. In total, 40 mature...
We experimentally measured the femtosecond pulse transmission through a silicon-on-insulator (SOI) nanowire waveguide under different temperatures and input pulse energy with a cross-correlation frequency-resolved optical gating (XFROG) measurement s...
Pulse hydraulic fracturing (PHF) is a key technique for reservoir stimulation. PHF can well accelerate the rupture of rock. However, the supercharging mechanism of PHF is not fully understood. The main reason is that the pressure distribution and its...
During pulse signal collection, width information of pulse waves is essential for the diagnosis of disease. However, currently used measuring instruments can only detect the amplitude while can’t acquire the width information. This paper propos...
Laser-induced breakdown spectroscopy (LIBS) is an in situ analytical technique. Compared to traditional single-pulse LIBS (SP-LIBS), collinear double-pulse LIBS (DP-LIBS) is a promising technique due to its lower limit of detection for trace elements...
The multi-stage pulse competition of pressurized pulsed water jet becomes the initial pulse at the head tip, and hydraulic parameters are the key parameters that affect the characteristics of multiple pulses. Based on the ultra-high-speed imaging sys...
Pulse pile-up in pulse-height energy analyzers increases when the incident rate of pulses increases relative to the inverse of the dead time per pulse of the detection system. Changes in the observed energy distributions with incident rate and detect...
Efficient coal grinding is a crucial aspect of the energy and mining industries. However, traditional grinding methods are known to be energy-intensive and cause significant wear on equipment as well as negative environmental impacts due to the relea...
Nuclear magnetic resonance relaxation dispersion (rd) experiments provide kinetics and thermodynamics information of molecules undergoing conformational exchange. Rd experiments often use a Carr-Purcell-Meiboom-Gill (CPMG) pulse train equally separat...
The series-type 12-pulse rectifier generates a large amount of harmonics in the AC side current due to the strong nonlinearity of its rectifying diodes, causing serious harmonic pollution to the power grid. This article proposes a series 36-pulse rec...
In the past decade, mid-infrared (MIR) few-cycle lasers have attracted remarkable research efforts for their applications in strong-field physics, MIR spectroscopy, and bio-medical research. Here we present a review of MIR few-cycle pulse generation...
Rapid and accurate analysis of micro/nano bio-objects (e.g., cells, biomolecules) is crucial in clinical diagnostics and drug discovery. While a traditional resistive pulse sensor can provide multiple kinds of information (size, count, surface charge...
The bandwidth of ultrafast pulses in the UV is limited by the finite acceptance bandwidth of the nonlinear crystals used for their generation. For fundamental laser pulses it is well established that spectral broadening can be used to overcome intrin...
Pulse palpation is an effective method for diagnosing arterial diseases. However, most pulse measurement devices use preconfigured pressures to collect pulse signals, and most pulse tactile simulators can only display standard or predefined pulse wav...
Powder metallurgy (PM) offers several advantages over conventional melt metallurgy, including improved homogeneity, fine grain size, and pseudo-alloying capabilities. Transitioning from conventional methods to PM can result in significant enhancement...
Cellular response upon nsPEF exposure depends on different parameters, such as pulse number and duration, the intensity of the electric field, pulse repetition rate (PRR), pulsing buffer composition, absorbed energy, and local temperature increase. T...
In the evolution of the modern “More Electric Aircrafts” (MEAs) concept, higher-pulse rectification systems using differential fork autotransformers play a pivotal role. These systems align with the MEAs concept, which aims to replace tra...
When radar receivers adopt digital channelization, it is prone to generating a cross-channel split signal, the rabbit ear effect, and a transition band repeated signal, leading to errors in radar signal sorting or identification. The pulse-splitting...
Magnetic pulse welding (MPW) is a joining method that uses Lorentz force generated from an electromagnetic field. This method not only has the advantage of not causing thermal deformation of the material and no by-products compared to the method of j...
In this study, electromagnetic field radiation bursts known as chaotic pulse trains (CPTs) and regular pulse trains (RPTs) generated by lightning flashes were analyzed. Through a numerical analysis it was found that a typical CPT could be generated b...
In this study, a detailed investigation of the dynamics of the generation of pre-pulse by post-pulses is presented, using single-shot self-referenced spectral interferometry (SRSI). The capability of SRSI in terms of the single-shot measurement of th...
This study presents a new type of pulse auscultation system, which uses a condenser microphone to measure pulse sound waves on the wrist, captures the microphone signal for filtering, amplifies the useful signal and outputs it to an oscilloscope in a...
Objective: Devices for cuffless blood pressure (BP) measurement have become increasingly widespread in recent years. Non-invasive continuous BP monitor (BPM) devices can diagnose potential hypertensive patients at an early stage; however, these cuffl...
Multiple pulsing occurs in most ultrashort-pulse laser systems when pumped at excessively high powers, and small fluctuations in pump power in certain regimes can cause unusual variations in the temporal separations of sub-pulses. Unfortunately, the...
The application of the nanosecond pulsed electric field (nsPEF) for biomedical treatments has gained more interest in recent decades due to the development of pulsed power technologies which provides the ability to control the electric field dose app...
Reliable analysis of remote photoplethysmography (rPPG) signals depends on identifying physiologically plausible pulses. Traditional approaches rely on clustering self-similar pulses, which can discard valid variability. Automating pulse quality asse...
This paper focuses on developing an anti-velocity jamming strategy that enhances the ability of a pulse-Doppler (PD) radar to detect moving targets in the presence of translational and/or micro motion velocity jamming generated by the digital radio f...
Pulse ionized titania 3D-nanonetworks (T3DN) are emerging materials for fabricating binder-free and carbon-free electrodes for electrochemical energy storage devices. In this article, we investigate the effect of the one of the most important fabrica...
To meet the application requirements of pulsed power technology in wastewater treatment and other aspects (for example, a scenario that requires a high-voltage pulse source that can output a pulse with a rising edge in the nanosecond range and a devi...
The ongoing trend in the development of powerful ultrashort pulse lasers has attracted increasing attention for this technology to be applied in large-scale surface engineering and modern microfabrication. However, the emission of undesired X-ray pho...
High-intensity nanosecond pulse electric fields (nsPEF) can preferentially induce various effects, most notably regulated cell death and tumor elimination. These effects have almost exclusively been shown to be associated with nsPEF waveforms defined...
A method is shown for preventing temporal broadening of ultrafast optical pulses in highly dispersive and fluctuating media for arbitrary signal-pulse profiles. Pulse pairs, consisting of a strong-field control-pulse and a weak-field signal-pulse, co...
The pulse source for plasma-accelerators supply operates under the conditions of nonlinear growth of load inductance, which complicates the matching of the source and the load. This article presents experimental studies of the use of both traditional...
Grain legumes, which are commonly referred to as pulses, are staple foods in many parts of the world, but are infrequently consumed in most economically developed countries where the obesity pandemic is prominent. However, even in low pulse consuming...
We investigate the production of an isolated attosecond pulse (IAP) via the phase-matching gating of high-harmonic generation with intense laser pulses. Our study is based on the integration of the propagation equation for the fundamental and generat...
The pulse measurement instrument is based on traditional Chinese medicine (TCM) and is used to collect the pulse of patients to assist in diagnosis and treatment. In the existing pulse measurement system, desktop devices have large volumes, complex p...
Fish barrier technology by pulsed direct current has broad application potential to guide fish to suitable waters. The primary objective of this investigation was to study the effects of electric pulse frequency and water velocity on fish deterrence...
A type of high-voltage pulse source technology generating double-exponential waveform pulse group was introduced. In this approach, the pulse interval could be adjusted with the step length of 100 μs, and the amplitude would reach up to 35 kV. This p...
This paper reports on a microelectromechanical systems (MEMS)-based sensor for pulse wave measurement. The sensor consists of an air chamber with a thin membrane and a 300-nm thick piezoresistive cantilever placed inside the chamber. When the membran...
Since its introduction in 2010, self-referenced spectral interferometry (SRSI) has turned out to be an analytical, sensitive, accurate, and fast method for characterizing the temporal profile of femtosecond pulses. We review the underlying principle...
Soft sensing technologies offer promising prospects in the fields of soft robots, wearable devices, and biomedical instruments. However, the structural design, fabrication process, and sensing algorithm design of the soft devices confront great diffi...
of 393