Membrane electrode assemblies (MEA) based on proton-conducting electrolyte membranes offer opportunities for the electrochemical compression of hydrogen. Mechanical hydrogen compression, which is more-mature technology, can suffer from low reliabilit...
Protonic ceramics (PCs) with high proton conductivity at intermediate temperatures (300–600 °C) have attracted many applications in energy conversion and storage devices such as PC fuel/electrolysis cells, PC membrane reactors, hydrogen pum...
Protonic ceramic electrochemical cells (PCECs), including protonic ceramic fuel cells, electrolysis cells and reversible cells, have attracted increasing attention as efficient solid-state devices for electricity generation, hydrogen production and c...
This paper reports an extended Nernst–Planck computational model that couples charged-defect transport and stress in tubular electrochemical cell with a ceramic proton-conducting membrane. The model is particularly concerned with coupled chemo-mechan...
This review paper focuses on the phenomenon of thermochemical expansion of two specific categories of conducting ceramics: Proton Conducting Ceramics (PCC) and Mixed Ionic-Electronic Conductors (MIEC). The theory of thermal expansion of ceramics is u...
Proton-conducting ceramic membranes show high hydrogen ion conductivity in the temperature range of 300–700 °C. They are attracting significant attention due to their relevant characteristics compared to both higher-temperature oxygen ion-c...
Proton-conducting ceramic materials have emerged as effective candidates for improving the performance of solid oxide cells (SOCs) and electrolyzers (SOEs) at intermediate temperatures. BaCeO3 and BaZrO3 perovskites doped with rare-earth elements suc...
Protonic ceramic fuel cells (PCFCs) are promising electrochemical devices for the efficient and clean conversion of hydrogen and low hydrocarbons into electrical energy. Their intermediate operation temperature (500–800 °C) proffers advantages in ter...
We have developed 12-membered silica-tetrahedra-ringed Na5YSi4O12-type sodium ion conducting glass-ceramics on the basis of the composition Na3+3x-yR1-xPySi3-yO9 (R: rare earth elements; denoted as Narpsio); especially, the material of Na4Y0.6P0.2Si2...
A novel process for producing thick protonic ceramics for use in hydrogen separation membrane reactors is demonstrated. Polymer clay bodies based on polyvinyl acetate (PVA) and mineral oil were formulated, and they permitted parts with complex archit...
Recent interest in environmentally friendly technology has promoted research on green house gas-free devices such as water steam electrolyzers, fuel cells and CO2/syngas converters. In such applications, proton conducting perovskite ceramics appear e...
Fuel electrode-supported tubular protonic ceramic cells (FETPCCs) based on the BaZr0.4Ce0.4Y0.15Zn0.05O3−δ (BZCYZ) membrane electrolyte was fabricated through a two-step method, in which the polyporous electrode-support tube was prepared...
A protonic ceramic fuel cell (PCFC) has great potential for medium temperature power generation. Its working process, however, is complicated and quite different from the traditional oxygen ionic solid oxide fuel cell (O2−-SOFC) and proton exch...
Yttrium-doped barium zirconate is a commonly used electrolyte material for Protonic Ceramic Fuel Cells (PCFC) due to its high protonic conductivity and high chemical stability. However, it is also known for its poor sinterability and poor grain bound...
The development of symmetrical solid oxide fuel cells with identical cathode and anode is beneficial for thermal matching and reducing the cost. Herein, proton-conducting electrolyte and novel high catalytic activity electrode material for symmetrica...
The rare-earth-doped zirconia-based solid electrolytes have gained significant interest in protonic ceramic fuel cell (PCFC) applications due to their high ionic conductivity. However, these solid electrolytes are susceptible to low conductivity and...
Protonic ceramic fuel cells (PCFCs) are one of the promising and emerging technologies for future energy generation. PCFCs are operated at intermediate temperatures (450–750 °C) and exhibit many advantages over traditional high-temperature...
Chromium-forming metallic interconnectors (ICs) are generally used to assemble protonic ceramic fuel cell stacks (PCFCs). Thus, Cr poisoning is a potential threat to the performance and stability of PCFCs. The effects of Cr deposit and poisoning on t...
Protonic ceramic fuel cells (PCFCs) offer direct and efficient conversion of hydrocarbon fuels into electricity. In this study, three internal-reforming (IR)-PCFC/gas turbine (GT) hybrid systems are proposed and analyzed to achieve higher system effi...
Proton ceramic fuel cells offer numerous advantages compared with conventional fuel cells. However, the practical implementation of these cells is hindered by the poor sintering activity of the electrolyte. Despite extensive research efforts to impro...
New advanced fuel cell technologies are moving towards high-temperature proton conductors (HTPCs) to meet environmental issues. Their elaboration remains a challenge and micro-computed tomography (µCT) is an innovative way to control their qual...
To optimize the oxygen reduction reaction activity and long-term stability of the PrBaFe2O6-δ (PBF) cathode for protonic ceramic fuel cell (PCFC), this study employed the sol–gel method to dope Sc at the Fe-site of PBF, preparing a novel...
The widespread application of protonic ceramic fuel cells is limited by the lack of oxygen electrodes with excellent activity and stability. Herein, the strategy of halogen doping in a Ba0.6Sr0.4Co0.7Fe0.2Nb0.1O3-δ (BSCFN) cathode is discussed...
Ceramics, which exhibit high proton conductivity at moderate temperatures, are studied as electrolyte membranes or electrode components of fuel cells, electrolysers or CO2 converters. In severe operating conditions (high gas pressure/high temperature...
Understanding the impact of sintering temperature on the physical and chemical properties of Ni-BaCe0.54Zr0.36Y0.1O3-δ (Ni-BCZY) composite anode is worthy of being investigated as this anode is the potential for protonic ceramic fuel cell (PCFC...
Compositionally engineered a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) (LBZ) nanocomposite cathodes were prepared by oxidation driven in situ exsolution of a single-phase material deposited on a BaZr0.9Y0.1...
A novel exsolution process was used to fabricate complex all-oxide nanocomposite cathodes for Protonic Ceramic Fuel Cells (PCFCs). The nanocomposite cathodes with La0.5Ba0.5Co1/3Mn1/3Fe1/3O3−δ-BaZr1−zYzO3−δ nominal compo...
The high-temperature proton ceramic membranes with simultaneous separation of hydrogen and oxygen exhibit promising applications in the catalytic conversion field. However, their separation performance often relies on external electrical circuits, wh...
Proton conductors are ceramic materials with a crystalline or amorphous structure, which allow the passage of an electrical current through them exclusively by the movement of protons: H+. Recent developments in proton-conducting ceramics present con...
Comparative studies were performed on variations in the ABO3 perovskite structure, chemical stability in a CO2-H2 gas atmosphere, and electrical conductivity measurements in air, hydrogen, and humidity-involving gas atmospheres of monophase orthorhom...
Ceramic proton conductors have the potential to lower the operating temperature of solid oxide cells (SOCs) to the intermediate temperature range of 400–600 °C. This is attributed to their superior ionic conductivity compared to oxide ion c...
Lanthanum tungstate (La6WO12) is a promising material for the development of hydrogen separation membranes, proton ceramic electrolyzer cells and protonic ceramic fuel cells due to its interesting transport properties and stability under different op...
New series of YBCO ceramics samples doping with different oxides such as SiO2, WO3, Al2O3, and TiO2 were fabricated to study the ionizing radiation shielding properties. The structure and morphology were explored by X-ray diffraction (XRD) and scanni...
Cermet films consisting of Ni, BaCe0.4Zr0.4Y0.2O3−δ (BCZY), and Gd0.1Ce0.9Ox (GDC), specifically, 60 wt%Ni–BCZY, 60 wt%Ni–BCZY–GDC, and 60 wt%Ni–GDC, were formed on BCZY electrolyte supports as anodes of proton cer...
Proton-conducting solid oxide fuel cells (P-SOFCs) are widely studied for their lower working temperatures than oxygen-ion-conducting SOFCs (O-SOFCs). Due to the elevated preparation and operation temperatures varying from 500 °C to 1500 °C,...
Research has been conducted on solid oxide fuel cells (SOFCs) for their fuel flexibility, modularity, high efficiency, and power density. However, the high working temperature leads to the deterioration of materials and increased operating costs. Con...
Slip casting was used to prepare BaCexZr0.9−xY0.1O3−d(BCZY)-NiO tubes with a diameter of ½ inches (1.25 cm) and ¾ inches (1.875 cm). Two compositions were studied: BCZY18 and BCZY27 for x = 0.1 and 0.2, respectively. The unfired tubes were then dip-c...
Hydrogen, renowned for its clean energy profile and high energy density, is a pivotal energy carrier for addressing global energy and environmental challenges. Solid oxide fuel cells (SOFCs) and proton ceramic fuel cells (PCFCs) have garnered signifi...
Biomaterials play a crucial role in enhancing human health and quality of life. They are employed in applications such as tissue substitution, diagnostic tools, medical supplies, therapeutic treatments, regenerative medicine, and radiation dosimetric...
Layered Ruddlesden-Popper (RP) lanthanide nickelates, Lnn+1NinO3n+1 (Ln = La, Pr, and Nd; n = 1, 2, and 3) have generated great interest as potential cathodes for proton conducting fuel cells (PCFCs). The high-order phase (n = 3) is especially intrig...
Hydrogen is expected to play an important role in the near future in the transition to a net-zero economy. Therefore, the development of new in situ and real-time analytical tools able to quantify hydrogen at high temperatures is required for future...
The development of new chemically resistant anodes for protonic ceramic fuel cells (PCFCs) is urgently required to avoid the costly deep hydrogen purification method. Ba0.95Ca0.05Ce0.9Y0.1O3−δ (5CBCY), which is more chemically resistant t...
In this report, the environmental aspects of producing proton conducting ceramics are investigated by means of the environmental Life Cycle Assessment (LCA) method. The proton conducting ceramics BaZr0.8Y0.2O3-δ (BZY), BaCe0.9Y0.1O2.95 (BCY10), and S...
Production of high efficiency renewable energy source for sustainable global development is an important challenge for humans. Hydrogen energy systems are one of the key elements for the development of sustainable energy future. These systems are eco...
The application of protonic ceramic electrolysis cells (PCECs) for ammonia (NH3) synthesis has been evaluated over the past 14 years. While nitrogen (N2) is the conventional fuel on the cathode side, various fuels such as methane (CH4), hydrogen (H2)...
Proton-conducting ceramics have gained significant attention in various applications. Yttrium-doped barium cerium zirconate (BaCexZr1−x−yYyO3–δ) is the state-of-the-art proton-conducting electrolyte but poses a major challenge...
The effect of A-site cation ordering on the cathode performance and chemical stability of A-site cation ordered LaBaCo2O5+δ and disordered La0.5Ba0.5CoO3−δ materials are reported. Symmetric half-cells with a proton-conducting BaZr0.9Y0.1O3−δ electrol...
One of the urgent tasks of applied materials science is the creation of novel high-effective materials with target properties. In the area of energy systems, there is a problem in the conversion of chemical energy to electricity without mechanical wo...
Steam electrolysis constitutes a prospective technology for industrial-scale hydrogen production. The use of ceramic proton-conducting electrolytes is a beneficial option for lowering the operating temperature. However, a significant challenge with t...
The effect of Sr deficiency on the hydration process and ionic and electronic conductivity of Yb-doped SrZrO3 proton conductors with a perovskite-type structure was investigated. Dense SrxZr0.95Yb0.05O3-δ (x = 0.94–1.00) ceramics were pre...
of 3