Skip to Content

125 Results Found

  • Proceeding Paper
  • Open Access
12 Citations
4,084 Views
4 Pages

A Disposable Inkjet-Printed Humidity and Temperature Sensor Fabricated on Paper

  • Dimitris Barmpakos,
  • Apostolos Segkos,
  • Christos Tsamis and
  • Grigoris Kaltsas

10 December 2018

In this work we present the development of a low-cost humidity and temperature sensing platform on paper by inkjet printing, using a commercial AgNPs conductive ink. The humidity sensing module was capable of measuring relative humidity in the range...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Article
  • Open Access
17 Citations
3,577 Views
10 Pages

10 February 2024

This paper reports a high-performance humidity sensor made using a novel cellulose nanofiber (CNF)–silver nanoparticle (AgNP) sensing material. The interdigital electrode pattern was printed via reverse-offset printing using Ag nano-ink, and th...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
41 Citations
7,062 Views
14 Pages

30 September 2021

Flexible and biodegradable sensors are advantageous for their versatility in a range of areas from smart packaging to agriculture. In this work, we characterize and compare the performance of interdigitated electrode (IDE) humidity sensors printed on...

(This article belongs to the Special Issue Applications of Body Worn Sensors and Wearables)
  • Review
  • Open Access
103 Citations
13,006 Views
24 Pages

22 January 2021

Printing technologies have been attracting increasing interest in the manufacture of electronic devices and sensors. They offer a unique set of advantages such as additive material deposition and low to no material waste, digitally-controlled design...

(This article belongs to the Special Issue 2D/3D Printed Sensors and Electronics)
  • Article
  • Open Access
118 Citations
10,201 Views
10 Pages

Paper as Active Layer in Inkjet-Printed Capacitive Humidity Sensors

  • Cristina Gaspar,
  • Juuso Olkkonen,
  • Soile Passoja and
  • Maria Smolander

22 June 2017

An inkjet-printed relative humidity sensor based on capacitive changes which responds to different humidity levels in the environment is presented in this work. The inkjet-printed silver interdigitated electrodes configuration on the paper substrate...

(This article belongs to the Special Issue Flexible Electronics and Sensors)
  • Article
  • Open Access
6 Citations
4,390 Views
14 Pages

Integrated Temperature–Humidity Sensors for a Pouch-Type Battery Using 100% Printing Process

  • Gyeongseok Oh,
  • Jae-Ho Sim,
  • Mijin Won,
  • Minhun Jung and ,
  • Snigdha Paramita Mantry and
  • Dong-Soo Kim
  • + 1 author+ 0 author

25 December 2023

The performance, stability, and lifespan of lithium-ion batteries are influenced by variations in the flow of lithium ions with temperature. In electric vehicles, coolants are generally used to maintain the optimal temperature of the battery, leading...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
51 Citations
5,893 Views
9 Pages

Graphene-PEDOT: PSS Humidity Sensors for High Sensitive, Low-Cost, Highly-Reliable, Flexible, and Printed Electronics

  • Vasiliy I. Popov,
  • Igor A. Kotin,
  • Nadezhda A. Nebogatikova,
  • Svetlana A. Smagulova and
  • Irina V. Antonova

24 October 2019

A comparison of the structure and sensitivity of humidity sensors prepared from graphene (G)-PEDOT: PSS (poly (3,4-ethylenedioxythiophene)) composite material on flexible and solid substrates is performed. Upon an increase in humidity, the G: PEDOT:...

(This article belongs to the Section Electronic Materials)
  • Article
  • Open Access
55 Citations
11,182 Views
13 Pages

Fabrication and Characterization of Flexible and Miniaturized Humidity Sensors Using Screen-Printed TiO2 Nanoparticles as Sensitive Layer

  • Georges Dubourg,
  • Apostolos Segkos,
  • Jaroslav Katona,
  • Marko Radović and ,
  • Slavica Savić,
  • Georgios Niarchos,
  • Christos Tsamis and
  • Vesna Crnojević-Bengin
  • + 3 authors+ 0 author

11 August 2017

This paper describes the fabrication and the characterization of an original example of a miniaturized resistive-type humidity sensor, printed on flexible substrate in a large-scale manner. The fabrication process involves laser ablation for the desi...

(This article belongs to the Special Issue Flexible Electronics and Sensors)
  • Article
  • Open Access
65 Citations
11,382 Views
13 Pages

Disposable, Paper-Based, Inkjet-Printed Humidity and H2S Gas Sensor for Passive Sensing Applications

  • Abdul Quddious,
  • Shuai Yang,
  • Munawar M. Khan,
  • Farooq A. Tahir and ,
  • Atif Shamim,
  • Khaled N. Salama and
  • Hammad M. Cheema
  • + 2 authors+ 0 author

6 December 2016

An inkjet-printed, fully passive sensor capable of either humidity or gas sensing is presented herein. The sensor is composed of an interdigitated electrode, a customized printable gas sensitive ink and a specialized dipole antenna for wireless sensi...

(This article belongs to the Special Issue Gas Nanosensors)
  • Article
  • Open Access
34 Citations
6,219 Views
20 Pages

Fully Inkjet-Printed CuO Sensor on Flexible Polymer Substrate for Alcohol Vapours and Humidity Sensing at Room Temperature

  • Petr Krcmar,
  • Ivo Kuritka,
  • Jan Maslik,
  • Pavel Urbanek and ,
  • Pavel Bazant,
  • Michal Machovsky,
  • Pavol Suly and
  • Petr Merka
  • + 3 authors+ 0 author

11 July 2019

This work focuses on an inkjet-fabricated sensor based on copper oxide nanostructured particles on polymer flexible substrate for the sensing of alcohol vapours and humidity at room temperature. Nanoparticles were prepared by a microwave-assisted sol...

(This article belongs to the Collection Gas Sensors)
  • Article
  • Open Access
36 Citations
5,127 Views
13 Pages

A Full-Range Flexible and Printed Humidity Sensor Based on a Solution-Processed P(VDF-TrFE)/Graphene-Flower Composite

  • Shenawar Ali Khan,
  • Muhammad Saqib,
  • Muhammad Muqeet Rehman,
  • Hafiz Mohammad Mutee Ur Rehman and ,
  • Sheik Abdur Rahman,
  • Yunsook Yang,
  • Seongwan Kim and
  • Woo-Young Kim
  • + 3 authors+ 0 author

26 July 2021

A novel composite based on a polymer (P(VDF-TrFE)) and a two-dimensional material (graphene flower) was proposed as the active layer of an interdigitated electrode (IDEs) based humidity sensor. Silver (Ag) IDEs were screen printed on a flexible polye...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
10 Citations
2,953 Views
11 Pages

Humidity Sensors Based on Cellulose Nanofiber Fabricated on a Three-Dimensional (3D) Curved Surface

  • Mijin Won,
  • Gyeongseok Oh,
  • Hyunah Lee,
  • Jaehwan Kim and
  • Dong-Soo Kim

23 November 2023

Traditional printed electronics processes have recently been utilized within 3D-printed structures where components and interconnects are introduced during manufacturing disruptions. The dielectric performance of 3D-printed materials has a low-resolu...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
9 Citations
3,865 Views
12 Pages

Wide-Range Humidity–Temperature Hybrid Flexible Sensor Based on Strontium Titanate and Poly 3,4 Ethylenedioxythiophene Polystyrene Sulfonate for Wearable 3D-Printed Mask Applications

  • Adnan Ahmed,
  • Afaque Manzoor Soomro,
  • Darshan Kumar,
  • Muhammad Waqas and ,
  • Kashif Hussain Memon,
  • Faheem Ahmed,
  • Suresh Kumar,
  • Hina Ashraf and
  • Kyung Hyun Choi
  • + 4 authors+ 0 author

30 December 2022

In this paper, we report a fast, linear wide-range hybrid flexible sensor based on a novel composite of strontium titanate (SrTiO3) and poly 3,4 ethylenedioxythiophene polystyrene sulfonate (PEDOT: PSS) as a sensing layer. Inter-digitate electrodes (...

(This article belongs to the Section Environmental Sensing)
  • Article
  • Open Access
33 Citations
10,055 Views
14 Pages

Disposable diapers are widely used by individuals with urinary incontinence. Diapers should be checked frequently for elderly, disabled, and hospital patients. Wet diapers that are not changed properly can cause health problems. The importance of ele...

(This article belongs to the Section Bioelectronics)
  • Article
  • Open Access
1 Citations
2,393 Views
22 Pages

Packaging-Grade Paper Humidity Sensors Made by Flexography Only: From Sustainable Manufacturing to Transient Applications

  • Tatiana Nowicka,
  • Sandra Lepak-Kuc,
  • Jerzy Szałapak,
  • Daniel Janczak and ,
  • Jarosław Szusta and
  • Małgorzata Jakubowska
  • + 1 author+ 0 author

13 February 2026

Printed electronics offer a scalable and sustainable route for integrating sensing systems into everyday environments; however, the use of flexography remains highly limited, and fully printed sensors fabricated exclusively with industrial flexograph...

(This article belongs to the Special Issue Advances in Surface and Coatings Technologies)
  • Feature Paper
  • Article
  • Open Access
13 Citations
3,762 Views
14 Pages

Influence of Sweat on Joint and Sensor Reliability of E-Textiles

  • Martin Hirman,
  • Jiri Navratil,
  • Michaela Radouchova,
  • Jiri Stulik and
  • Radek Soukup

11 January 2022

This article addresses reliability under the sweat of interconnection techniques for the mounting surface mounted device (SMD) components and fully printed humidity sensors onto conductive stretchable textile ribbons. Samples underwent testing for th...

  • Article
  • Open Access
56 Citations
7,033 Views
15 Pages

Fabrication and Characterization of Humidity Sensors Based on Graphene Oxide–PEDOT:PSS Composites on a Flexible Substrate

  • Francisco J. Romero,
  • Almudena Rivadeneyra,
  • Markus Becherer,
  • Diego P. Morales and
  • Noel Rodríguez

29 January 2020

In this paper, we present a simple, fast, and cost-effective method for the large-scale fabrication of high-sensitivity humidity sensors on flexible substrates. These sensors consist of a micro screen-printed capacitive structure upon which a sensiti...

(This article belongs to the Special Issue Advances in Capacitive Sensors)
  • Article
  • Open Access
6 Citations
2,581 Views
10 Pages

8 February 2022

In this study, the screen-printed flexible humidity sensor and supercapacitor structures from a suspension of mildly oxidized graphene (MOG) was obtained. MOG suspension with a low atomic oxygen content (~20%) was synthesized by electrochemical exfol...

(This article belongs to the Special Issue New Advances in Low-Dimensional Materials and Nanostructures)
  • Article
  • Open Access
40 Citations
5,507 Views
13 Pages

One-Step Fabrication of Paper-Based Inkjet-Printed Graphene for Breath Monitor Sensors

  • Wei Yin Lim,
  • Choon-Hian Goh,
  • Keenan Zhihong Yap and
  • Narayanan Ramakrishnan

30 January 2023

Irregularities in breathing patterns can be detected using breath monitor sensors, and this help clinicians to predict health disorders ranging from sleep disorders to heart failures. Variations in humidity during the inhalation and exhalation of bre...

(This article belongs to the Special Issue Biophysical Sensors for Biomedical/Health Monitoring Applications)
  • Article
  • Open Access
65 Citations
12,471 Views
16 Pages

Humidity Sensors Printed on Recycled Paper and Cardboard

  • Matija Mraović,
  • Tadeja Muck,
  • Matej Pivar,
  • Janez Trontelj and
  • Anton Pleteršek

28 July 2014

Research, design, fabrication and results of various screen printed capacitive humidity sensors is presented in this paper. Two types of capacitive humidity sensors have been designed and fabricated via screen printing on recycled paper and cardboard...

(This article belongs to the Special Issue Printed Sensors)
  • Article
  • Open Access
11 Citations
9,429 Views
9 Pages

A Low-Power Integrated Humidity CMOS Sensor by Printing-on-Chip Technology

  • Chang-Hung Lee,
  • Wen-Yu Chuang,
  • Melissa A. Cowan,
  • Wen-Jung Wu and
  • Chih-Ting Lin

23 May 2014

A low-power, wide-dynamic-range integrated humidity sensing chip is implemented using a printable polymer sensing material with an on-chip pulse-width-modulation interface circuit. By using the inkjet printing technique, poly(3,4-ethylene-dioxythio...

(This article belongs to the Special Issue Printed Sensors)
  • Article
  • Open Access
10 Citations
3,381 Views
14 Pages

Mullite 3D Printed Humidity Sensors

  • Yurii Milovanov,
  • Arianna Bertero,
  • Bartolomeo Coppola,
  • Paola Palmero and
  • Jean-Marc Tulliani

10 June 2024

Mullite substrates with two different porosities were 3D printed, and tested as humidity sensors. To evaluate the effects of porosity on humidity sensitivity, the samples were sintered at 1400 °C (Sensor 1) and 1450 °C (Sensor 2). The sensors...

(This article belongs to the Special Issue Innovative Manufacturing Processes of Silicate Materials)
  • Article
  • Open Access
30 Citations
4,412 Views
13 Pages

Fast-Response Non-Contact Flexible Humidity Sensor Based on Direct-Writing Printing for Respiration Monitoring

  • Xiaojun Chen,
  • Kanglin Ma,
  • Jialin Ou,
  • Deyun Mo and ,
  • Haishan Lian,
  • Xin Li,
  • Zaifu Cui and
  • Yihui Luo
  • + 3 authors+ 0 author

7 August 2023

Respiratory monitoring is crucial for evaluating health status and identifying potential respiratory diseases such as respiratory failure, bronchitis, and pneumonia. Humidity sensors play a significant role in this regard, and efforts are being made...

(This article belongs to the Section Nano- and Micro-Technologies in Biosensors)
  • Article
  • Open Access
18 Citations
4,556 Views
10 Pages

Carbon Dots as Sensing Layer for Printed Humidity and Temperature Sensors

  • Almudena Rivadeneyra,
  • José F. Salmeron,
  • Fabio Murru,
  • Alejandro Lapresta-Fernández and ,
  • Noel Rodríguez,
  • Luis Fermín Capitan-Vallvey,
  • Diego P. Morales and
  • Alfonso Salinas-Castillo
  • + 3 authors+ 0 author

7 December 2020

This work presents an innovative application of carbon dots (Cdots) nanoparticles as sensing layer for relative humidity detection. The developed sensor is based on interdigitated capacitive electrodes screen printed on a flexible transparent polyeth...

(This article belongs to the Special Issue Functional Nanomaterials for Sensor Applications)
  • Article
  • Open Access
15 Citations
3,800 Views
11 Pages

2 January 2021

Development of paper-based sensors that do not suffer with humidity interference is desirable for practical environmental applications. In this work, a laser processing method was reported to effectively modulate the cross-sensitivity to humidity of...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
25 Citations
4,991 Views
9 Pages

Direct Ink-Write Printing of Ceramic Clay with an Embedded Wireless Temperature and Relative Humidity Sensor

  • Cory Marquez,
  • Jesus J. Mata,
  • Anabel Renteria,
  • Diego Gonzalez and ,
  • Sofia Gabriela Gomez,
  • Alexis Lopez,
  • Annette N. Baca,
  • Alan Nuñez,
  • Md Sahid Hassan and
  • Yirong Lin
  • + 11 authors+ 6 authors

22 March 2023

This research presents a simple method to additively manufacture Cone 5 porcelain clay ceramics by using the direct ink-write (DIW) printing technique. DIW has allowed the application of extruding highly viscous ceramic materials with relatively high...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
32 Citations
3,892 Views
17 Pages

The Ti0.2V1.8C MXene Ink-Prepared Chemiresistor: From Theory to Tests with Humidity versus VOCs

  • Nikolay P. Simonenko,
  • Olga E. Glukhova,
  • Ilya A. Plugin,
  • Dmitry A. Kolosov and ,
  • Ilya A. Nagornov,
  • Tatiana L. Simonenko,
  • Alexey S. Varezhnikov,
  • Elizaveta P. Simonenko,
  • Victor V. Sysoev and
  • Nikolay T. Kuznetsov
  • + 5 authors+ 0 author

The 2D structure of MXenes attracts wide research attention toward an application of these materials in gas sensors. These structures are extremely sensitive to minor variations in their composition, which are employed for tuning their functional pro...

(This article belongs to the Section Materials for Chemical Sensing)
  • Article
  • Open Access
8 Citations
4,283 Views
16 Pages

Atmospheric Pressure Solvothermal Synthesis of Nanoscale SnO2 and Its Application in Microextrusion Printing of a Thick-Film Chemosensor Material for Effective Ethanol Detection

  • Nikita A. Fisenko,
  • Ivan A. Solomatov,
  • Nikolay P. Simonenko,
  • Artem S. Mokrushin and ,
  • Philipp Yu. Gorobtsov,
  • Tatiana L. Simonenko,
  • Ivan A. Volkov,
  • Elizaveta P. Simonenko and
  • Nikolay T. Kuznetsov
  • + 4 authors+ 0 author

14 December 2022

The atmospheric pressure solvothermal (APS) synthesis of nanocrystalline SnO2 (average size of coherent scattering regions (CSR)—7.5 ± 0.6 nm) using tin acetylacetonate as a precursor was studied. The resulting nanopowder was used as a f...

(This article belongs to the Collection Gas Sensors)
  • Article
  • Open Access
27 Citations
4,220 Views
14 Pages

In a unique approach to develop a “green” solution for in-situ monitoring, low-cost inkjet-printed temperature sensors on paper substrate were fully integrated into natural fiber-reinforced lightweight components for which structural health monitorin...

(This article belongs to the Special Issue Paper-Based Sensors and Microfluidic Devices)
  • Article
  • Open Access
3 Citations
1,673 Views
17 Pages

Research on a Humidity Sensor Based on Polymerizable Deep Eutectic System-Modified Filter Paper

  • Mengyao Shen,
  • Bo Zhang,
  • Qi Lu,
  • Yanan Xiao and ,
  • Hao Shen,
  • Yi Ni,
  • Yuechen Liu and
  • Haitao Song
  • + 3 authors+ 0 author

In recent years, paper-based humidity sensors have emerged as a highly promising technology for humidity detection. In this work, a polymerizable deep eutectic solvent (PDES) was prepared via a one-step blending method, which was applied to modify fi...

(This article belongs to the Section Nanostructures for Chemical Sensing)
  • Article
  • Open Access
16 Citations
3,564 Views
13 Pages

15 October 2024

The exponential demand for real-time monitoring applications has altered the course of sensor development, from sensor electronics miniaturization, e.g., resorting to printing techniques, to low-cost, flexible and functional wearable materials. Humid...

(This article belongs to the Special Issue Advanced Nanomaterials for Soft and Wearable Electronics)
  • Article
  • Open Access
17 Citations
3,473 Views
11 Pages

24 June 2022

Electrode structure is an essential factor affecting the performance of flexible humidity sensors. In this study, Cu and Cu2 + 1O electrodes were printed by the one-step method using laser direct writing technology to reduce the nano–CuO ink on...

  • Review
  • Open Access
41 Citations
8,721 Views
45 Pages

20 March 2023

In the first part of the review article “General considerations” we give information about conventional flexible platforms and consider the advantages and disadvantages of paper when used in humidity sensors, both as a substrate and as a humidity-sen...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
1 Citations
939 Views
13 Pages

Self-Powered Flexible Humidity Sensor Based on HACC/LiCl Composite Electrolyte

  • Baojian Zhao,
  • Fanfeng Yi,
  • Shangping Gao,
  • Hong Zhang and
  • Caideng Yuan

15 February 2026

To address the challenges of traditional flexible humidity sensors, such as reliance on external power supply, complex fabrication processes, and poor adaptability to energy-limited scenarios, this study successfully developed a low-cost, easily scal...

(This article belongs to the Special Issue Fabrication, Characteristics and Applications of Multifunctional Polymer Nanocomposites (Second Edition))
  • Article
  • Open Access
64 Citations
8,625 Views
11 Pages

Humidity Sensing Properties of Paper Substrates and Their Passivation with ZnO Nanoparticles for Sensor Applications

  • Georgios Niarchos,
  • Georges Dubourg,
  • Georgios Afroudakis,
  • Markos Georgopoulos and ,
  • Vasiliki Tsouti,
  • Eleni Makarona,
  • Vesna Crnojevic-Bengin and
  • Christos Tsamis
  • + 3 authors+ 0 author

4 March 2017

In this paper, we investigated the effect of humidity on paper substrates and propose a simple and low-cost method for their passivation using ZnO nanoparticles. To this end, we built paper-based microdevices based on an interdigitated electrode (IDE...

(This article belongs to the Special Issue Materials and Applications for Sensors and Transducers)
  • Article
  • Open Access
8 Citations
4,952 Views
14 Pages

8 May 2017

Incidents of injuries caused by tiles falling from building exterior walls are frequently reported in Taiwan. Humidity is an influential factor in tile deterioration but it is more difficult to measure the humidity inside a building structure than th...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
20 Citations
6,470 Views
12 Pages

A MoS2 Nanoflakes-Based LC Wireless Passive Humidity Sensor

  • Shujing Su,
  • Wen Lv,
  • Tong Zhang,
  • Qiulin Tan and ,
  • Wendong Zhang and
  • Jijun Xiong
  • + 1 author+ 0 author

17 December 2018

In this study, an LC wireless passive humidity sensor based on MoS2 nanoflakes was proposed. The LC wireless passive humidity sensor was optimized by performing HFSS simulations and fabricated via a screen-printing technique. The MoS2 nanoflakes were...

(This article belongs to the Special Issue Resonant Sensors)
  • Article
  • Open Access
80 Citations
14,717 Views
14 Pages

Waste Coffee Ground Biochar: A Material for Humidity Sensors

  • Pravin Jagdale,
  • Daniele Ziegler,
  • Massimo Rovere,
  • Jean Marc Tulliani and
  • Alberto Tagliaferro

15 February 2019

Worldwide consumption of coffee exceeds 11 billion tons/year. Used coffee grounds end up as landfill. However, the unique structural properties of its porous surface make coffee grounds popular for the adsorption of gaseous molecules. In the present...

(This article belongs to the Special Issue Functional Materials for the Applications of Advanced Gas Sensors)
  • Article
  • Open Access
17 Citations
3,746 Views
14 Pages

Printable and Flexible Humidity Sensor Based on Graphene -Oxide-Supported MoTe2 Nanosheets for Multifunctional Applications

  • Lei Ni,
  • Xiaoyu Li,
  • Fangkai Cai,
  • Zhicheng Dong and ,
  • Yuhong Deng,
  • Tao Jiang,
  • Zhengyang Su,
  • Hao Chang,
  • Zhongwen Zhang and
  • Yang Luo
  • + 5 authors+ 0 author

7 April 2023

This study focuses on a novel humidity sensor composed of graphene-oxide (GO)-supported MoTe2 nanosheets. Conductive Ag electrodes were formed on PET substrates by inkjet printing. A thin film of GO-MoTe2 was deposited on the Ag electrode used for ad...

(This article belongs to the Special Issue Advanced Nanocomposites for Sensing Applications)
  • Article
  • Open Access
25 Citations
4,675 Views
14 Pages

28 July 2021

Porous polytetrafluoroethylene (PTFE) is physically flexible, thermally and chemically stable, relatively inexpensive, and commercially available. It is attractive for various flexible sensors. This paper has studied flexible capacitive humidity sens...

(This article belongs to the Section Wearables)
  • Article
  • Open Access
7 Citations
2,905 Views
18 Pages

Sol–Gel Synthesis of Iron-Doped Sepiolite as a Novel Humidity-Sensing Material

  • Ahmed Sabry Afify,
  • Mehran Dadkhah and
  • Jean-Marc Tulliani

15 September 2022

Nowadays, humidity sensors are attracting a great deal of attention, and there are many studies focusing on enhancing their performances. Nevertheless, their fabrication through facile methods at reasonable cost is a significant factor. In this artic...

(This article belongs to the Special Issue Advances in Ceramics)
  • Article
  • Open Access
1 Citations
1,287 Views
15 Pages

Triply Periodic Minimal Surfaces Mullite Structures for Humidity Detection

  • Yurii Milovanov,
  • Arianna Bertero,
  • Bartolomeo Coppola,
  • Paola Palmero and
  • Jean-Marc Tulliani

Three-dimensional-printed complex mullite structures based on triply periodic minimal surfaces (TPMSs, namely, Schwartz and Gyroid) with two different thicknesses (Schwartz 1 and Gyroid 1–4 mm, Schwartz 2 and Gyroid 2–6 mm) were fabricate...

(This article belongs to the Special Issue Sensors for Food Testing, Environmental Analysis, and Medical Diagnostics)
  • Article
  • Open Access
1,256 Views
15 Pages

Assessment of KN95 Mask Filtering Degradation and Breathing Detection: A Pilot Study

  • Julie Payette,
  • Alexandre Perrotton,
  • Paul Fourmont,
  • Fabrice Vaussenat and ,
  • Jaime A. Benavides,
  • Luis Felipe Gerlein and
  • Sylvain G. Cloutier
  • + 2 authors+ 0 author

16 December 2025

This study aims to monitor mask performance in operando using all-printed humidity sensor arrays based on BiFeO3/BiOCl heterostructures. Two screen-printed 19-sensor arrays are fixed directly atop the mask, in order to analyze moisture levels in exha...

(This article belongs to the Section Biomedical Sensors)
  • Proceeding Paper
  • Open Access
11 Citations
3,091 Views
4 Pages

Multiresonator-Based Printable Chipless RFID for Relative Humidity Sensing

  • Daniel Dominic,
  • Simon Krafft,
  • Naeem Safdari and
  • Sharmistha Bhadra

We present a chipless RFID for relative humidity sensing. It consists of three spiral resonators coupled to a 50 Ω microstrip line. One resonator is used for humidity sensing, and the other two are used for encoding ID. The sensing resonator is coate...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
14 Citations
2,569 Views
13 Pages

GO/CNT−OH/Nafion Nanocomposite Humidity Sensor Based on the LC Wireless Method

  • Chengkai Wang,
  • Chunxiao Jiao,
  • Meng Wang,
  • Jinghong Pan and
  • Qi Wang

24 June 2023

In recent years, LC resonant sensors have gained widespread attention for their extensive applications in industries such as pharmaceutical storage and food transportation. A wireless passive sensor with a good sensing performance is proposed based o...

  • Proceeding Paper
  • Open Access
4 Citations
3,039 Views
4 Pages

A novel miniaturized carbon dioxide (CO2) sensor based on an IDE transducer is described and characterized. The CO2 sensor based on different semiconducting metal oxide and ionogel composites films deposited by ink-jet printing. The sensor is operate...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
36 Citations
9,150 Views
11 Pages

A Gas Chromatographic System for the Detection of Ethylene Gas Using Ambient Air as a Carrier Gas

  • Nayyer Abbas Zaidi,
  • Muhammad Waseem Tahir,
  • Michael J. Vellekoop and
  • Walter Lang

7 October 2017

Ethylene gas is a naturally occurring gas that has an influence on the shelf life of fruit during their transportation in cargo ships. An unintentional exposure of ethylene gas during transportation results in a loss of fruit. A gas chromatographic s...

(This article belongs to the Section Chemical Sensors)
  • Proceeding Paper
  • Open Access
6 Citations
2,542 Views
6 Pages

A Graphene Oxide Flexible Sensor for Humidity Detection

  • Anna Maria Laera,
  • Gennaro Cassano,
  • Emiliano Burresi,
  • Maria Lucia Protopapa and
  • Michele Penza

18 September 2023

A flexible humidity sensor operating at room temperature was produced by direct drop casting of a graphene oxide (GO) water solution on a substrate of bimatted polyester, previously coated with inkjet-printed interdigitated electrodes in silver. The...

(This article belongs to the Proceedings of The 2nd International Electronic Conference on Chemical Sensors and Analytical Chemistry)
  • Proceeding Paper
  • Open Access
2 Citations
2,331 Views
5 Pages

Inkjet-Printing Polymer Nanocomposite for Detecting VOCs

  • Mohammad Madhi Kiaee,
  • Thomas Maeder and
  • Juergen Brugger

21 December 2018

Polymer nanocomposite (PNC) inks containing polyvinylpyrrolidone with a molecular weight of 40 kDa (PVP40) and a high structure carbon black (CB) were formulated for gas sensing applications. The formulation was optimized for inkjet printing by using...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Abstract
  • Open Access
1 Citations
1,915 Views
3 Pages

Ecoresorbable Radio-Frequency Platform for Humidity and Temperature Sensing

  • James Bourely,
  • Jaemin Kim,
  • Xavier Aeby,
  • Gilberto Siqueira and ,
  • Gustav Nyström,
  • Oleksandr Vorobyov,
  • Christian Beyer,
  • David Schmid and
  • Danick Briand
  • + 4 authors+ 0 author

Aiming to reduce electronic waste in sensing applications, we report on an eco-friendly printed microstrip line to sense relative humidity (RH) and temperature. The device is made of zinc resonators on paper used as transducers, which are coated with...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)

of 3