The long dissolution time and large dispensed volumes of oil repellent polymers in offshore oil fields lead to a great increase in the volume and number of dissolution and maturation tanks in the polymer formulation system. However, there is limited...
This study compares the effects of pre-processing multiple polymers together to form a single-phase polymer alloy prior to amorphous solid dispersion formulation. KinetiSol compounding was used to pre-process a 1:1 (w/w) ratio of hypromellose acetate...
Objectives: To address the critical limitations of current formulations that fail to simultaneously resolve indomethacin’s poor water solubility, susceptibility to gastric acid hydrolysis, and difficulty in balancing rapid onset with long-term...
The durability of a platinum catalyst in a polymer electrolyte membrane fuel cell is studied at various operating conditions with respect to the different electric potential difference (called voltage) applied in accelerated stress tests. The electro...
The effect of hydroxypropyl methylcellulose (HPMC) and methylcellulose (Methocel® 60 HG) on the dissolution behavior of two cocrystals derived from nitazoxanide (NTZ), viz., nitazoxanide-glutaric acid (NTZ-GLU, 1:1) and nitazoxanide-succinic acid...
This paper is dealing with the dissolution mechanism of crystalline sulindac into amorphous Polyvinylpyrrolidone (PVP) upon heating and annealing at high temperatures. Special attention is paid on the diffusion mechanism of drug molecules in the poly...
(1) Background: Pharmaceutical cocrystals have attracted remarkable interest and have been successfully used to enhance the absorption of poorly water-soluble drugs. However, supersaturable cocrystals are sometimes thermodynamically unstable, and the...
The aim of this work was to develop cefdinir solid dispersions (CSDs) prepared using hydrophilic polymers with enhanced dissolution/solubility and in vivo oral bioavailability. CSDs were prepared with hydrophilic polymers such as hydroxypropyl-methyl...
The goal of this investigation was to determine the effectiveness of hydrophilic polymers in preparing a solid dispersion to enhance the solubility and dissolution of poorly water-soluble drugs, such as curcumin. In order to prepare the solid dispers...
p-coumaric acid is a natural phenolic compound with antioxidant activity, but its poor solubility and low bioavailability limit its practical use in oral formulations. The aim of this study is to evaluate how different polymers affect the dissolution...
The aim of this work was to investigate the factors influencing the dissolution characteristics of drug substances from hydrophilic polymer matrix tablets. Various kinds of cellulose derivative polymers were used in for matrix formation. Their swelli...
This paper describes the processing conditions needed to produce low density nanocellular polymers based on polymethylmethacrylate (PMMA) with relative densities between 0.45 and 0.25, cell sizes between 200 and 250 nm and cell densities higher than...
Electrochemical sensors are powerful tools for the detection and real-time monitoring of a wide variety of analytes. However, the long-term operation of Faradaic sensors in complex media is challenging due to fouling. The protection of the electrode...
Polymer flooding is one of the effective technologies for enhanced oil recovery (EOR) in offshore oilfields. However, traditional polymer maturation tanks are large in volume, heavy in weight, and slow in dissolution rate, limiting their application...
Polyvinyl(butyral) (PVB) post-production waste collected from the windshields of end-of-life vehicles and post-consumer building laminated glass are valuable polymeric materials that can be reused. Every year, large amounts of PVB waste are still bei...
Improving drug solubility is necessary for formulations of poorly water-soluble drugs, especially for oral administration. Amorphous solid dispersions (ASDs) are widely used in the pharmaceutical industry to improve the physical stability and solubil...
Plant mucilages are commonly employed as excipients in pharmaceutical manufacturing. Ocimum basilicum (Lamiaceae family), a source of hydrophilic mucilage referred herein as Ocicum, was evaluated for the solubility enhancer of a model drug, aceclofen...
Background/Objectives: This study evaluates the efficacy of twin screw melt granulation (TSMG), and hot-melt extrusion (HME) techniques in enhancing the solubility and dissolution of simvastatin (SIM), a poorly water-soluble drug with low bioavailabi...
Background/Objectives: This study aimed to develop a novel amorphous solid dispersion (ASD) platform using poly(2-ethyl-2-oxazoline) (PEtOx) for the solubility enhancement of poorly water-soluble drugs. Fenofibrate (FB), a Biopharmaceutics Classifica...
Polypropylene (PP) is widely used and currently very little recycled. A promising method for recycling the PP present in plastic waste involves its selective dissolution and subsequent separation from undissolved compounds. We address here the fundam...
This work reports on the production of poly(vinylidene fluoride) (PVDF) membranes by non-solvent induced phase separation (NIPS) using N,N-dimethylformamide (DMF) as solvent and water as non-solvent. The influence of the processing conditions in the...
This research work dives into the complexity of hot-melt extrusion (HME) and its influence on drug stability, focusing on solid dispersions containing 30% of glibenclamide and three 50:50 polymer blends. The polymers used in the study are Ethocel Sta...
To mitigate lithium dissolution and polysulfide shuttle effect phenomena in high-energy lithium sulfur batteries (LISBs), a conductive, flexible, and easily modified polymer composite layer was applied on the anode. The polymer composite layer includ...
In this study, we prepared solid dispersions (SDs) of 20(S)-protopanaxadiol (PPD) using a melting-solvent method with different polymers, in order to improve the solubility and dissolution performance of drugs with poor water solubility. The SDs were...
Background/Objectives: Surfactants are commonly used in amorphous solid dispersions (ASDs) to improve drug dissolution. A mechanistic understanding of their impact on in vitro dissolution and in vivo pharmacokinetics is essential for rational ASD des...
Minitablets have been extensively studied in recent years as a convenient pediatric form because they allow successful administration even in very young children. Their advantages include easy dose adjustment by multiplication of single units as well...
The relationship between processing conditions, structure and morphology are key issues to understanding the final properties of materials. For instance, in the case of polymers to be used as scaffolds in tissue engineering, wound dressings and membr...
High-gravity rotating packed beds enhance mass transfer via high-gravity fields, where the flow and viscosity distribution of polymer solutions govern dissolution efficiency and equipment compactness. Understanding these behaviors is essential for op...
This paper describes a study for waste of electrical and electronic equipment (WEEE) to characterise the plastic composition of different mixed plastic fractions. Most of the samples studied are currently excluded from material recycling and arise as...
Intranasal drug applications show significant therapeutic potential for diverse pharmaceutical modalities. Because the formulation applied to the nasal cavity is discharged to the pharyngeal side by mucociliary clearance, the formulation should be di...
Background: Poloxamers are promising biomaterials for drug delivery applications due to their ability to enhance biopharmaceutical properties. Methods: This study focused on designing solid dispersions of ivermectin using poloxamer 407 by the fusion...
The low solubility and slow dissolution of hydrophobic drugs is a major challenge for the pharmaceutical industry. In this paper, we present the synthesis of surface-functionalized poly(lactic-co-glycolic acid) (PLGA) nanoparticles for incorporation...
A cocrystal of the antihypertensive drug chlorthalidone (CTD) with caffeine (CAF) was obtained (CTD-CAF) by the slurry method, for which a 2:1 stoichiometric ratio was found by powder and single-crystal X-ray diffraction analysis. Cocrystal CTD-CAF s...
Enrofloxacin (ENRO) is a poorly soluble drug used in veterinary medicine. It differs from the more widely used fluoroquinolone ciprofloxacin (CIP) by the presence of an ethyl substituent on its piperazine amino group. While a number of recent studies...
Hot-melt extrusion is a well-established tool in the pharmaceutical industry, mostly implemented to increase the solubility of poorly soluble drugs. A less frequent application of this technique is to obtain formulations with extended release. This s...
Poor aqueous solubility still disqualifies many promising drug candidates at late stages of development. Amorphous solid dispersion (ASD) technology solves this limitation by trapping the active pharmaceutical ingredient (API) in a high-energy, non-c...
Proton exchange membrane fuel cells (PEMFCs) exhibit high energy efficiency and rapid load response, but challenges are faced in membrane fabrication, including the need for renewable resources and cost-effective, non-toxic solvents. This study analy...
The evolution of technology means that increasingly better materials are needed. It is well known that as a result of their interesting properties, nanocellular polymers perform better than microcellular ones. For this reason, the investigation on na...
Degradation of a catalyst layer in polymer electrolyte membrane fuel cells is considered, which is caused by electrochemical reactions of the platinum ion dissolution and oxide coverage. An accelerated stress test is applied, where the electric poten...
In this work, the effects of thermoplastic polyurethane (TPU) chemistry and concentration on the cellular structure of nanocellular polymers based on poly(methyl-methacrylate) (PMMA) are presented. Three grades of TPU with different fractions of hard...
The effects of three hydrophilic polymers, namely, carboxymethyl cellulose sodium (CMC-Na), polyvinyl alcohol (PVA) and poloxamer-188 (PXM-188) on the solubility and dissolution of diflunisal (DIF) in complexation with β-cyclodextrin (βCD)...
The aim of the study was the preparation and comparison of two types of orodispersible gel films (ODF) by the solvent casting method. Natural polymers: sodium alginate (ALG) or hydroxypropyl methylcellulose (HPMC) were used as the gel film formers, a...
Amorphous solid dispersions (ASDs) based on proteins as co-formers have previously shown promising potential to improve the solubility and bioavailability of poorly water-soluble drugs. In particular, whey proteins have shown to be promising co-forme...
The purpose of this study was to investigate the efficacy of hydrophilic polymers in a solid dispersion formulation in improving the solubility and dissolution rate of rivaroxaban (RXB), a poorly soluble drug. The developed solid dispersion consisted...
This study evaluated in vitro and in vivo drug release of bedaquiline from in situ forming gels (ISGs) containing 200 mg eq./g bedaquiline fumarate salt prepared with four different grades of poly(d,l-lactide) (PDLLA) or poly(d,l-lactide-co-glycolide...
The present study reports the use of the dynamic light scattering (DLS) method to analyze metal nanoparticle sizes in supported catalysts (as a model system for different metal-oxide nanocomposites, ceramics, etc.). The selective dissolution of matri...
This work describes a novel screening strategy that implements small-scale spray-drying in early development of binary amorphous solid dispersions (ASDs). The proposed methodology consists of a three-stage decision protocol in which small batches (20...
Protecting low coordinated sites (LCS) of Pt nanoparticles, which are vulnerable to dissolution, may be an ideal solution for enhancing the durability of polymer electrolyte fuel cells (PEMFCs). However, the selective protection of LCSs without deact...
Piroxicam is a Biopharmaceutical Classification System (BCS) Class II drug having poor aqueous solubility and a short half-life. The rationale behind the present research was to develop a Piroxicam nanosuspension to enhance the solubility and thereby...
The aim of this study was to improve the physicochemical properties of cocoa extract (CE) using hot-melt extrusion (HME) for pharmaceutical proposes. A mixture design was applied using three distinct hydrophilic polymeric matrices (Soluplus, Plasdone...
of 17