Skip to Content

336 Results Found

  • Article
  • Open Access
7 Citations
3,832 Views
16 Pages

5 May 2024

A polyethylene (PE) film surface modification method is proposed via benzoic acid (BA) alkylation grafting to improve the surface affinity to polar substances. The procedure involves sequentially spraying AlCl3 and BA onto the heat-softened PE surfac...

(This article belongs to the Special Issue A Commemorative Issue in Honor of Professor Jose M. Kenny: Advances in Polymer Composites and Nanocomposites)
  • Article
  • Open Access
5 Citations
3,058 Views
13 Pages

Surface Antifouling Modification on Polyethylene Filtration Membranes by Plasma Polymerization

  • An-Li Hou,
  • Szu-Yi Wang,
  • Wen-Pin Lin,
  • Wei-Hsuan Kuo and ,
  • Tsung-Jen Wang and
  • Meng-Jiy Wang
  • + 1 author+ 0 author

6 November 2020

Surface modification on microporous polyethylene (PE) membranes was facilitated by plasma polymerizing with two hydrophilic precursors: ethylene oxide vinyl ether (EO1V) and diethylene oxide vinyl ether (EO2V) to effectively improve the fouling again...

  • Article
  • Open Access
17 Citations
7,341 Views
14 Pages

Effect of H2S Plasma Treatment on the Surface Modification of a Polyethylene Terephthalate Surface

  • Alenka Vesel,
  • Janez Kovac,
  • Gregor Primc,
  • Ita Junkar and
  • Miran Mozetic

5 February 2016

H2S plasma created by an electrode-less radio-frequency discharge was used to modify the surface properties of the polymer polyethylene terephthalate. X-ray photoelectron spectroscopy, secondary ion mass spectrometry and atomic force microscopy were...

(This article belongs to the Section Biomaterials)
  • Communication
  • Open Access
12 Citations
10,936 Views
9 Pages

26 February 2018

Aqueous two-phase systems (ATPSs) or aqueous biphasic systems are useful for biological separation/preparation and cell micropatterning. Specifically, aqueous two-phase systems (ATPSs) are not harmful to cells or biomaterials; therefore, they have be...

(This article belongs to the Special Issue Surface Chemical Modification)
  • Review
  • Open Access
35 Citations
6,803 Views
18 Pages

Surface Modification of Ultra-High-Molecular-Weight Polyethylene and Applications: A Review

  • Jing He,
  • Yuan Wang,
  • Yong Qian,
  • Jianshuang Guo and ,
  • Jiaxin Lu and
  • Weicheng Yang
  • + 1 author+ 0 author

6 December 2024

Ultra-high-molecular-weight polyethylene (UHMWPE) is often considered an ideal reinforcing material due to its extraordinary characteristics like high abrasion resistance, excellent toughness, and chemical stability. However, the poor surface propert...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
6 Citations
3,625 Views
21 Pages

Surface Modification of Porous Polyethylene Implants with an Albumin-Based Nanocarrier-Release System

  • Jonas Eckrich,
  • Niklas Hoormann,
  • Erik Kersten,
  • Keti Piradashvili and ,
  • Frederik R. Wurm,
  • Martin Heller,
  • Sven Becker,
  • Toni Anusic,
  • Juergen Brieger and
  • Sebastian Strieth
  • + 5 authors+ 0 author

Background: Porous polyethylene (PPE) implants are used for the reconstruction of tissue defects but have a risk of rejection in case of insufficient ingrowth into the host tissue. Various growth factors can promote implant ingrowth, yet a long-term...

(This article belongs to the Special Issue Early Biological Reactions on Biomaterials Determining Long-Term Tissue Regeneration Effects)
  • Article
  • Open Access
33 Citations
4,471 Views
13 Pages

14 October 2019

Dielectric breakdown is a significant property for the insulation system in high voltage power equipment. This paper is dedicated to the improvement of dielectric breakdown by surface-functionalized nanoparticles in low-density polyethylene (LDPE). P...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
8 Citations
3,612 Views
10 Pages

Poly(ether ether ketone)-Induced Surface Modification of Polyethylene Separators for Li-Ion Batteries

  • Yunjung Kim,
  • Yong-Jin Jang,
  • Hyungeun Seo,
  • Je-Nam Lee and ,
  • Sang-Gil Woo and
  • Jae-Hun Kim
  • + 1 author+ 0 author

4 January 2023

With the global effort to reduce fossil fuels and to use eco-friendly energy, interest in Li-ion batteries (LIBs) is rapidly increasing. In the LIB system, the separator is an important component for determining the rate performance and safety of cel...

(This article belongs to the Topic Batteries, Supercapacitors, Fuel Cells and Combined Energy/Power Supply Systems)
  • Article
  • Open Access
30 Citations
5,033 Views
14 Pages

Effect of Content and Surface Modification of Fique Fibers on the Properties of a Low-Density Polyethylene (LDPE)-Al/Fique Composite

  • Mario Fernando Muñoz-Vélez,
  • Miguel Angel Hidalgo-Salazar and
  • Jose Herminsul Mina-Hernández

20 September 2018

This work presents the physical-thermal and mechanical characterization of a low-density polyethylene (LDPE)-Al matrix composite material that was obtained from reinforcing recycled (post-consumer) long-life Tetra Pak packages with fique natural fibe...

(This article belongs to the Special Issue Modification of Natural Fibres to Improve Biocomposites Performances)
  • Article
  • Open Access
20 Citations
7,117 Views
19 Pages

Enhancement of Adhesion Characteristics of Low-Density Polyethylene Using Atmospheric Plasma Initiated-Grafting of Polyethylene Glycol

  • Taghreed Abdulhameed Al-Gunaid,
  • Igor Krupa,
  • Mabrouk Ouederni,
  • Senthil Kumar Krishnamoorthy and
  • Anton Popelka

16 April 2021

The low-density polyethylene/aluminum (LDPE/Al) joint in Tetra Pak provides stability and strength to food packaging, ensures protection against outside moisture, and maintains the nutritional values and flavors of food without the need for additives...

(This article belongs to the Special Issue Advances in Plasma Processes for Polymers)
  • Article
  • Open Access
152 Citations
11,420 Views
22 Pages

22 February 2022

Background: The present study aimed to fabricate surface-modified chitosan nanoparticles with two mucoadhesive polymers (sodium alginate and polyethylene glycol) to optimize their protein encapsulation efficiency, improve their mucoadhesion propertie...

  • Review
  • Open Access
233 Citations
33,792 Views
28 Pages

Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) as a Promising Polymer Material for Biomedical Applications: A Concise Review

  • Muzamil Hussain,
  • Rizwan Ali Naqvi,
  • Naseem Abbas,
  • Shahzad Masood Khan and ,
  • Saad Nawaz,
  • Arif Hussain,
  • Nida Zahra and
  • Muhammad Waqas Khalid
  • + 3 authors+ 0 author

4 February 2020

Ultra-High Molecular Weight Polyethylene (UHMWPE) is used in biomedical applications due to its high wear-resistance, ductility, and biocompatibility. A great deal of research in recent decades has focused on further improving its mechanical and trib...

(This article belongs to the Special Issue Biopolymers for Biomedical Applications)
  • Article
  • Open Access
30 Citations
5,792 Views
12 Pages

26 December 2017

Due to their large compatibility difference, polyethylene (PE) and polyoxymethylene (POM) cannot be welded together by laser transmission welding. In this study, PE and POM are pretreated using plasma that significantly enhances their laser transmiss...

  • Article
  • Open Access
1 Citations
1,174 Views
26 Pages

Modification of Polyethylene Films in Low-Temperature Gliding Discharge Arc Plasma

  • Undrakh Mishigdorzhiyn,
  • Kirill Demin,
  • Andrei Khagleev,
  • Oksana Ayurova and ,
  • Stephan Agnaev,
  • Saian Dondukov,
  • Alexander Semenov and
  • Shunqi Mei
  • + 3 authors+ 0 author

19 December 2025

Polyethylene (PE) films are widely used as waterproofing materials on the surfaces of metal pipelines. Poor adhesion of PE films to a metal substrate reduces durability, leading to shorter service life and higher economic costs. The current research...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Proceeding Paper
  • Open Access
1,983 Views
6 Pages

Fibroblast and THP-1 Cell Response to Multi-Arm PEGNHS-Modified Decellularized Porcine Pericardium

  • Sreypich Say,
  • Mika Suzuki,
  • Yoshihide Hashimoto,
  • Tsuyoshi Kimura and
  • Akio Kishida

The adhesion between an implant and a wound could result in over-bleeding when attempting to separate the two. To address this issue, a cell-repelling implant is preferred. In this study, a cell-repelling membrane was prepared by modifying decellular...

(This article belongs to the Proceedings of The 1st International Online Conference on Functional Biomaterials)
  • Article
  • Open Access
4 Citations
2,598 Views
21 Pages

Proposing an Affordable Plasma Device for Polymer Surface Modification and Microbial Inactivation

  • William Chiappim,
  • Felipe Vicente de Paula Kodaira,
  • Gisele Fátima Soares de Castro,
  • Diego Morais da Silva and ,
  • Thayna Fernandes Tavares,
  • Ana Carla de Paula Leite Almeida,
  • Bruno Henrique Silva Leal,
  • Antje Quade,
  • Cristiane Yumi Koga-Ito and
  • Konstantin Georgiev Kostov
  • + 5 authors+ 0 author

9 September 2024

This study proposes an affordable plasma device that utilizes a parallel-plate dielectric barrier discharge geometry with a metallic mesh electrode, featuring a straightforward 3D-printed design. Powered by a high-voltage supply adapted from a cosmet...

  • Article
  • Open Access
1 Citations
1,574 Views
14 Pages

Tuning Poly(dimethylsiloxane) Hydrophilization and Coating Stability via the Optimization of Polyethylene Glycol Molecular Weight

  • Daniil Golubchikov,
  • Konstantin Oleynichenko,
  • Anton Murashko,
  • Yuri Efremov and ,
  • Sofia Safaryan,
  • Frederico D. A. S. Pereira,
  • Galina Nifontova,
  • Anna Solovieva,
  • Anastasia Shpichka and
  • Peter Timashev
  • + 5 authors+ 0 author

12 December 2025

Polydimethylsiloxane (PDMS) is widely used in microfluidics and medical devices; however, its inherent hydrophobicity limits its applications. This can be resolved by the formation of polyethylene glycol (PEG)-based hydrophilic coatings. Here, we aim...

(This article belongs to the Special Issue Functional Polymer Films for Surface Modification and Coating Applications)
  • Review
  • Open Access
21 Citations
7,363 Views
36 Pages

Functional Ultra-High Molecular Weight Polyethylene Composites for Ligament Reconstructions and Their Targeted Applications in the Restoration of the Anterior Cruciate Ligament

  • Sonia B. Wahed,
  • Colin R. Dunstan,
  • Philip C. Boughton,
  • Andrew J. Ruys and ,
  • Shaikh N. Faisal,
  • Tania B. Wahed,
  • Bidita Salahuddin,
  • Xinying Cheng,
  • Yang Zhou and
  • Shazed Aziz
  • + 7 authors+ 2 authors

28 May 2022

The selection of biomaterials as biomedical implants is a significant challenge. Ultra-high molecular weight polyethylene (UHMWPE) and composites of such kind have been extensively used in medical implants, notably in the bearings of the hip, knee, a...

(This article belongs to the Special Issue Smart and Functional Polymer Composites)
  • Article
  • Open Access
17 Citations
4,104 Views
14 Pages

Can Superhydrophobic PET Surfaces Prevent Bacterial Adhesion?

  • Tugce Caykara,
  • Sara Fernandes,
  • Adelaide Braga,
  • Joana Rodrigues and ,
  • Ligia R. Rodrigues and
  • Carla Joana Silva
  • + 1 author+ 0 author

21 March 2023

Prevention of bacterial adhesion is a way to reduce and/or avoid biofilm formation, thus restraining its associated infections. The development of repellent anti-adhesive surfaces, such as superhydrophobic surfaces, can be a strategy to avoid bacteri...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
2 Citations
4,058 Views
18 Pages

Preparation of Nanoparticle-Immobilized Gold Surfaces for the Reversible Conjugation of Neurotensin Peptide

  • Hidayet Gok,
  • Deniz Gol,
  • Betul Zehra Temur,
  • Nureddin Turkan and ,
  • Ozge Can,
  • Ceyhun Ekrem Kirimli,
  • Gokcen Ozgun and
  • Ozgul Gok
  • + 3 authors+ 0 author

Polymer coatings as thin films stand out as a commonly used strategy to modify biosensor surfaces for improving detection performance; however, nonspecific biomolecule interactions and the limited degree of ligand conjugation on the surface have nece...

(This article belongs to the Section Chemical Biology)
  • Article
  • Open Access
4 Citations
3,199 Views
15 Pages

Hydrophilization of Hydrophobic Mesoporous High-Density Polyethylene Membranes via Ozonation

  • Polina M. Tyubaeva,
  • Mikhail A. Tyubaev,
  • Vyacheslav V. Podmasterev,
  • Anastasia V. Bolshakova and
  • Olga V. Arzhakova

This work addresses hydrophilization of hydrophobic mesoporous membranes based on high-density polyethylene (HDPE) via ozonation. Mesoporous HDPE membranes were prepared by intercrystallite environmental crazing. Porosity was 50%, and pore dimensions...

(This article belongs to the Section Polymeric Membranes)
  • Article
  • Open Access
1 Citations
490 Views
20 Pages

Interfacial Enhancement of Polyethylene Fiber-Reinforced ECC via Multi-Walled Carbon Nanotubes Functionalization

  • Baolin Peng,
  • Chonggen Pan,
  • Yuxin Huang,
  • Huiqing Wang and ,
  • Jian Geng,
  • Yedong Chen,
  • Xiangkun Meng and
  • Youpeng Duan
  • + 3 authors+ 0 author

10 June 2026

Polyethylene (PE) fibers are promising reinforcements for engineered cementitious composites (ECC); however, their highly hydrophobic nature and inherent chemical inertness limit their reinforcing effectiveness. This study investigated the use of dif...

(This article belongs to the Special Issue Application and Research of Nanomaterials in Cement and Its Composites)
  • Article
  • Open Access
8 Citations
2,419 Views
12 Pages

Effect of Surface Modification on the Properties of Buckwheat Husk—High-Density Polyethylene Biocomposites

  • Roberto C. Vázquez-Fletes,
  • Vahid Sadeghi,
  • Rubén González-Núñez and
  • Denis Rodrigue

12 October 2023

This study focuses on the production and characterization of biocomposites based on a thermoplastic polymer (high-density polyethylene, HDPE) and a biosourced filler (buckwheat husk, BHS) to develop more sustainable composites. Compounding was perfor...

(This article belongs to the Special Issue Sustainable Biocomposites)
  • Article
  • Open Access
14 Citations
6,105 Views
16 Pages

Surface Modification of Fe-ZSM-5 Using Mg for a Reduced Catalytic Pyrolysis Temperature of Low-Density Polyethylene to Produce Light Olefin

  • Yincui Li,
  • Ting Liu,
  • Shengnan Deng,
  • Xiao Liu and ,
  • Qian Meng,
  • Mengxue Tang,
  • Xueying Wu and
  • Huawei Zhang
  • + 3 authors+ 0 author

18 January 2024

Although the catalytic pyrolysis of low-density polyethylene (LDPE) to produce light olefin has shown potential industrial application advantages, it has generally suffered when using higher pyrolysis temperatures. In this work, Mg-modified Fe-ZSM-5...

(This article belongs to the Topic Valorizing Waste through Thermal and Biological Processes for Sustainable Energy Production)
  • Article
  • Open Access
6 Citations
3,590 Views
11 Pages

Surface Modification of Polyethylene Terephthalate Track-Etched Membranes by 2,2,3,3,4,4,5,5,6,6,7,7-Dodecafluoroheptyl Acrylate for Application in Water Desalination by Direct Contact Membrane Distillation

  • Aigerim Kh. Shakayeva,
  • Arman B. Yeszhanov,
  • Alexander N. Borissenko,
  • Murat T. Kassymzhanov and ,
  • Ainash T. Zhumazhanova,
  • Nikolai A. Khlebnikov,
  • A. K. Nurkassimov,
  • Maxim V. Zdorovets,
  • Olgun Güven and
  • Ilya V. Korolkov
  • + 5 authors+ 0 author

In this work, the surfaces of poly (ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670–1310 nm were hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerizati...

(This article belongs to the Section Membrane Applications)
  • Article
  • Open Access
5 Citations
4,200 Views
16 Pages

21 January 2024

The growing prevalence of antimicrobial resistance in bacterial strains has increased the demand for preventing biological deterioration on the surfaces of films used in applications involving food contact materials (FCMs). Herein, we prepared superh...

(This article belongs to the Special Issue Advances in Functional Polymer Coatings and Surfaces)
  • Proceeding Paper
  • Open Access
1,242 Views
10 Pages

30 January 2026

Polyethylene is widely used in flexible packaging, but its hydrophobic and inert surface limits its compatibility with environmentally friendly water-based inks and paints. Conventional methods improve wettability only temporarily and with limited co...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Processes)
  • Article
  • Open Access
4 Citations
4,438 Views
13 Pages

Study on the Sound Absorption Properties of Recycled Polyester Nonwovens through Alkaline Treatment and Dimple Processing

  • Gyeong Cheol Yu,
  • Jeong Jin Park,
  • Eun Hye Kang,
  • Sun Young Lee and ,
  • Youl Huh and
  • Seung Goo Lee
  • + 1 author+ 0 author

2 April 2024

This study focused on manufacturing efficient automobile sound-absorbing materials through alkaline treatment and dimple processing of recycled polyethylene terephthalate (rPET) nonwoven fabric. The rPET nonwoven fabric was produced with a sound-abso...

(This article belongs to the Special Issue Surface Modification and Coating to Improve Properties of Various Materials)
  • Feature Paper
  • Article
  • Open Access
59 Citations
10,987 Views
10 Pages

Comparison of SF6 and CF4 Plasma Treatment for Surface Hydrophobization of PET Polymer

  • Matic Resnik,
  • Rok Zaplotnik,
  • Miran Mozetic and
  • Alenka Vesel

21 February 2018

The fluorination of the polymer polyethylene terephthalate in plasma created from SF6 or CF4 gas at various pressures was investigated. The surface was analysed by X-ray photoelectron spectroscopy and water contact angle measurements, whereas the pla...

(This article belongs to the Special Issue Surface Modification to Improve Properties of Materials)
  • Article
  • Open Access
32 Citations
5,803 Views
14 Pages

Cellulose nanocrystals (CNCs) were surface modified by esterification in tetrahydrofuran (THF) at 25 °C using different catalysts and anhydrides bearing different alkyl side chain lengths. Unmodified and acetic anhydride (AcAnh)-modified CNCs wer...

  • Article
  • Open Access
11 Citations
4,442 Views
10 Pages

Optimization of Islet Microencapsulation with Thin Polymer Membranes for Long-Term Stability

  • Shota Toda,
  • Artin Fattah,
  • Kenta Asawa,
  • Naoko Nakamura and ,
  • Kristina N. Ekdahl,
  • Bo Nilsson and
  • Yuji Teramura
  • + 2 authors+ 0 author

6 November 2019

Microencapsulation of islets can protect against immune reactions from the host immune system after transplantation. However, sufficient numbers of islets cannot be transplanted due to the increase of the size and total volume. Therefore, thin and st...

(This article belongs to the Section B: Biology and Biomedicine)
  • Article
  • Open Access
29 Citations
5,332 Views
20 Pages

Synthesis and Cytotoxicity Study of Magnetite Nanoparticles Coated with Polyethylene Glycol and Sorafenib–Zinc/Aluminium Layered Double Hydroxide

  • Mona Ebadi,
  • Kalaivani Buskaran,
  • Saifullah Bullo,
  • Mohd Zobir Hussein and ,
  • Sharida Fakurazi and
  • Giorgia Pastorin
  • + 1 author+ 0 author

17 November 2020

In the last two decades, the development of novel approaches for cancer treatment has attracted intense attention due to the growing number of patients and the inefficiency of the available current conventional treatments. In this study, superparamag...

(This article belongs to the Special Issue Polymeric Materials for Drug Delivery Application)
  • Article
  • Open Access
10 Citations
5,243 Views
15 Pages

24 September 2020

Different forms of unmodified and modified Poly(ethylene glycols) (PEGs) are widely used as antifouling and antibacterial agents for biomedical industries and Nylon 6 is one of the polymers used for biomedical textiles. Our recent study focused on an...

(This article belongs to the Special Issue Polymer Processing and Surfaces)
  • Article
  • Open Access
29 Citations
4,591 Views
10 Pages

Plasma Treatment of Poly(ethylene terephthalate) Films and Chitosan Deposition: DC- vs. AC-Discharge

  • Tatiana S. Demina,
  • Mikhail S. Piskarev,
  • Olga A. Romanova,
  • Andrey K. Gatin and ,
  • Boris R. Senatulin,
  • Elena A. Skryleva,
  • Tatiana M. Zharikova,
  • Alla B. Gilman,
  • Alexander A. Kuznetsov and
  • Peter S. Timashev
  • + 6 authors+ 1 author

21 January 2020

Plasma treatment is one of the most promising tools to control surface properties of materials tailored for biomedical application. Among a variety of processing conditions, such as the nature of the working gas and time of treatment, discharge type...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
22 Citations
8,931 Views
13 Pages

Antibacterial Performance of Alginic Acid Coating on Polyethylene Film

  • Elika Karbassi,
  • Ahmad Asadinezhad,
  • Marian Lehocký,
  • Petr Humpolíček and ,
  • Alenka Vesel,
  • Igor Novák and
  • Petr Sáha
  • + 2 authors+ 0 author

21 August 2014

Alginic acid coated polyethylene films were examined in terms of surface properties and bacteriostatic performance against two most representative bacterial strains, that is, Escherichia coli and Staphylococcus aureus. Microwave plasma treatment foll...

(This article belongs to the Special Issue Antimicrobial Polymers)
  • Feature Paper
  • Article
  • Open Access
50 Citations
8,671 Views
14 Pages

Aminated Polyethylene Terephthalate (PET) Nanofibers for the Selective Removal of Pb(II) from Polluted Water

  • Diego Morillo Martín,
  • Mohamed Magdi Ahmed,
  • Mónica Rodríguez,
  • María A. García and
  • Mirko Faccini

24 November 2017

Electrospun nanofibers have been successfully applied to remove toxic and carcinogenic contaminants such as heavy metals from polluted water. In this study, an efficient adsorbent based on poly(ethylene terephthalate) (PET) nanofibers was developed f...

(This article belongs to the Special Issue Electrospun Materials 2018)
  • Article
  • Open Access
4 Citations
5,263 Views
11 Pages

9 December 2017

Improving the biocompatibility of polyethylene terephthalate (PET) vascular grafts is an important task for avoiding thrombus formation. Therefore, SO2 plasma at various treatment periods were used to modify PET surface properties by forming sulfate...

  • Article
  • Open Access
9 Citations
6,836 Views
16 Pages

Cell Proliferation on Polyethylene Terephthalate Treated in Plasma Created in SO2/O2 Mixtures

  • Nina Recek,
  • Matic Resnik,
  • Rok Zaplotnik,
  • Miran Mozetic and ,
  • Helena Motaln,
  • Tamara Lah-Turnsek and
  • Alenka Vesel
  • + 2 authors+ 0 author

25 February 2017

Samples of polymer polyethylene terephthalate were exposed to a weakly ionized gaseous plasma to modify the polymer surface properties for better cell cultivation. The gases used for treatment were sulfur dioxide and oxygen of various partial pressur...

(This article belongs to the Special Issue Advance of Polymers Applied to Biomedical Applications: Cell Scaffolds)
  • Feature Paper
  • Review
  • Open Access
220 Citations
21,174 Views
18 Pages

Membranes with Surface-Enhanced Antifouling Properties for Water Purification

  • Nima Shahkaramipour,
  • Thien N. Tran,
  • Sankara Ramanan and
  • Haiqing Lin

Membrane technology has emerged as an attractive approach for water purification, while mitigation of fouling is key to lower membrane operating costs. This article reviews various materials with antifouling properties that can be coated or grafted o...

(This article belongs to the Special Issue Feature Papers)
  • Article
  • Open Access
57 Citations
10,321 Views
24 Pages

Modification of Polyethylene by RF Plasma in Different/Mixture Gases

  • Aya E. Abusrafa,
  • Salma Habib,
  • Igor Krupa,
  • Mabrouk Ouederni and
  • Anton Popelka

22 February 2019

Herein, low-density polyethylene (LDPE) films were treated using radio-frequency plasma discharge in the presence of air, nitrogen, oxygen, argon, and their mixtures to introduce new chemical functionalities. The surface properties of treated LDPE we...

  • Article
  • Open Access
2 Citations
1,645 Views
16 Pages

Argon Ion Implantation as a Method of Modifying the Surface Properties of Wood–Plastic Composites

  • Izabela Betlej,
  • Marek Barlak,
  • Karolina Lipska,
  • Piotr Borysiuk and
  • Piotr Boruszewski

31 October 2024

Wood–plastic composites (WPCs) combine the properties of plastics and lignocellulosic fillers. A particular limitation in their use is usually a hydrophobic, poorly wettable surface. The surface properties of materials can be modified using ion...

  • Article
  • Open Access
2 Citations
958 Views
22 Pages

Plasma–Induced Modification Mechanisms of PET Films: Correlated Evolution of Topographical Features and Surface Chemical States

  • Yang Wang,
  • Ying Yang,
  • Jinlian Hu,
  • Yuanyuan Lu and ,
  • Xiaoyu Hao and
  • Jun Zheng
  • + 1 author+ 0 author

The effects of RF plasma treatments using different gases (Ar, O2, and N2) and processing parameters on the surface wettability of polyethylene terephthalate (PET) films were systematically investigated. Atomic force microscopy (AFM) and X–ray...

(This article belongs to the Special Issue Nanostructured Protective Coatings and Surface Engineering for Advanced Materials)
  • Article
  • Open Access
932 Views
16 Pages

Atmospheric Plasma-Treated Recycled Polyethylene (rPE) as a Compatibilizer in rPE/Oil Palm Empty Fruit Bunch Fiber Composites

  • Annisa Rifathin,
  • Dea Talitha Syahara,
  • Siti Mutia Mawaddah,
  • Muhammad Hanif Ainun Azhar and ,
  • Ishak Ahmad,
  • Joddy Arya Laksmono,
  • Mochamad Chalid and
  • Adam Febriyanto Nugraha
  • + 3 authors+ 0 author

Composites based on rPE and OPEFB waste are considered sustainable materials. However, their performance is limited by hydrophobic–hydrophilic incompatibility, which weakens interfacial adhesion. This study investigated the atmospheric-pressure...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
964 Views
14 Pages

Enhancement of the Antioxidant Activity of Hedysari Radix Particle Dispersion via ZIF-8/PEG Surface Co-Adsorption

  • Xionggao Han,
  • Chaoyue Wang,
  • Jianmei Wang,
  • Qiqi Pan and ,
  • Jinghui Feng and
  • Guanglei Zuo
  • + 1 author+ 0 author

2 December 2025

Herein, a co-adsorption modification based on ZIF-8 was introduced with the contribution of polyethylene glycol package to enhance the antioxidant potency of the Hedysari Radix disperse particles. In the solution system containing ethanol, the rough...

  • Article
  • Open Access
19 Citations
4,909 Views
17 Pages

20 August 2020

In order to inhibit the outward-migrations of photo-initiator molecules in the ultraviolet-initiated crosslinking process and simultaneously improve the crosslinking degree and dielectric properties of crosslinked polyethylene (XLPE) materials, we ha...

(This article belongs to the Section Nanochemistry)
  • Article
  • Open Access
35 Citations
5,984 Views
21 Pages

Influence of Hydroxyapatite Surface Functionalization on Thermal and Biological Properties of Poly(l-Lactide)- and Poly(l-Lactide-co-Glycolide)-Based Composites

  • Małgorzata Gazińska,
  • Anna Krokos,
  • Magdalena Kobielarz,
  • Marcin Włodarczyk and ,
  • Paulina Skibińska,
  • Bogusz Stępak,
  • Arkadiusz Antończak,
  • Milena Morawiak,
  • Przemysław Płociński and
  • Karolina Rudnicka
  • + 5 authors+ 0 author

13 September 2020

Novel biocomposites of poly(L-lactide) (PLLA) and poly(l-lactide-co-glycolide) (PLLGA) with 10 wt.% of surface-modified hydroxyapatite particles, designed for applications in bone tissue engineering, are presented in this paper. The surface of hydrox...

(This article belongs to the Special Issue Polymeric Scaffolds: Design, Processing, and Biomedical Application)
  • Article
  • Open Access
1 Citations
1,862 Views
13 Pages

Reinforcement of Polyethylene with Potassium Hexatitanate Whiskers: Importance of Polyvinylpyrrolidone Additive

  • Qin Pan,
  • Qinxiang Jia,
  • Jin Xie,
  • Xiaoyong Li and ,
  • Yong Wu,
  • Yang Sun,
  • Suihong Chu,
  • Bo Yang,
  • Zhexi Chen and
  • Kewei Peng
  • + 5 authors+ 0 author

Potassium hexatitanate whiskers are prepared and characterized in this study. The reinforcement of polyethylene with potassium hexatitanate whiskers is also investigated. The potassium hexatitanate whiskers are prepared through the calcination of TiO...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
7 Citations
2,088 Views
23 Pages

Potential of Compost-Derived Actinomycetes for Low-Density Polyethylene Degradation

  • Elżbieta Szczyrba,
  • Tetiana Pokynbroda,
  • Agnieszka Gąszczak,
  • Nataliia Koretska and ,
  • Stepan Tistechok,
  • Ivan Roman and
  • Oleksandr Gromyko
  • + 2 authors+ 0 author

27 August 2025

The growing concern over the long-term persistence of plastic waste has driven research into biological methods of breaking down polymers. This study investigated a process that combines physicochemical pretreatment and biodegradation of low-density...

(This article belongs to the Special Issue Degradation of Plastics)
  • Article
  • Open Access
2 Citations
2,640 Views
13 Pages

15 October 2024

This study aims at the modification of the surface properties of twill-5 polyethylene terephthalate (PET) fabric, in particular to improve its hydrophilicity. It compares the hydrophilic potential and efficacy of two vinyl monomers radically grafted...

  • Article
  • Open Access
3 Citations
4,643 Views
10 Pages

30 December 2022

Notably, antibiofouling is an important and predominant technique adopted to improve the surfaces of biomaterials. In this study, polyethylene glycol-grafted polyethylene glycols bearing azidophenyl groups were synthesized and immobilized on polystyr...

(This article belongs to the Section Smart and Functional Polymers)

of 7